From jaime at infinbox.com Wed Jul 1 12:00:59 2015 From: jaime at infinbox.com (Jaime Loureiro) Date: Wed, 1 Jul 2015 12:00:59 +0200 Subject: [Fiware-finodex-coaching] Error creating router in my FiLab account. Message-ID: Dear finodex coaching, I have two problems in my filab account (Lannion 2 node): Firstly, it is not possible to create a router. When I try to create it, I get the following error: *Error creating router SmartHospitalRouter. Cause: 409 Error* *{"NeutronError": {"message": "Quota exceeded for resources: ['router']", "type": "OverQuota", "detail": ""}} * It is important because I need to deploy several services in different VMs and I only have 1 public IP. I need port forwarding and I guess deploying a router is necessary. Other issue is I don't be able to create a new network. Once I fill the network name, subnet name, dns, network address parameters I push create button and it doesn't run. I sent this issues to communityaccount at fiware.org two days ago but I have not obtained answer yet. Thanks for your attention Best JAIME LOUREIRO ACU?A[image: Infinbox] *jaime at infinbox.com * T (+34) 605 530 981T (+34) 605 530 981 *contact at infinbox.com *| *www.infinbox.com * [IMPORTANTE] La informaci?n que pudiera contener este comunicado, relacionada con datos de car?cter personal, se encuentra amparada en la Ley Org?nica de Protecci?n de Datos 15/99, que compromete a no utilizar estos datos para fines que no sean los estrictamente necesarios para la realizaci?n de su cometido, a?adiendo adem?s la absoluta confidencialidad y exclusividad, quedando prohibida a cualquier persona su revelaci?n, copia, distribuci?n o el ejercicio de cualquier acci?n relativa a su contenido. Si recibe este correo electr?nico err?neamente, ruego lo elimine de todos sus archivos. Los datos de car?cter personal se incluir?n en los ficheros creados por Infinbox S.L.. La finalidad de estos ficheros es optimizar las relaciones administrativas y comerciales. Los datos personales recogidos se utilizar?n para dichas finalidades y el afectado podr? acceder a sus datos personales, rectificarlos o cancelarlos contactando con Infinbox S.L. Crta Marcosende-Charruadas, num 11, Vigo, como responsable del fichero.[#] -------------- next part -------------- An HTML attachment was scrubbed... URL: From miguel at talkykar.com Wed Jul 1 12:32:34 2015 From: miguel at talkykar.com (MAPT Talkykar) Date: Wed, 1 Jul 2015 12:32:34 +0200 Subject: [Fiware-finodex-coaching] CEP problem Message-ID: We are having troubles while running IBM CEP. We have deployed it in our server. When an event occurs, we dont obtain any output event or file and we get this in catalina log: may 20, 2015 8:53:52 AM com.ibm.hrl.proton.admin.webapp.resources.DefinitionsResource getAllDefinitions INFORMACI?N: starting getAllDefinitions may 20, 2015 8:53:52 AM com.ibm.hrl.proton.admin.webapp.resources.DefinitionsResource getAllDefinitions INFORMACI?N: finished getAllDefinitions may 20, 2015 8:54:22 AM com.ibm.hrl.proton.admin.webapp.resources.DefinitionsResource getAllDefinitions INFORMACI?N: starting getAllDefinitions may 20, 2015 8:54:22 AM com.ibm.hrl.proton.admin.webapp.resources.DefinitionsResource getAllDefinitions INFORMACI?N: finished getAllDefinitions may 20, 2015 9:22:17 AM com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource updateInstanceState INFORMACI?N: starting updateInstanceState may 20, 2015 9:22:17 AM com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource updateInstanceState INFORMACI?N: perfoming action: change definitions... may 20, 2015 9:22:17 AM com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource performServiceCall INFORMACI?N: performing request: http://localhost:8080/manager/text/stop?path=/ProtonOnWebServer may 20, 2015 9:22:17 AM com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource updateInstanceState INFORMACI?N: properties file path:/usr/local/tomcat7/webapps/ProtonOnWebServer/Proton.properties may 20, 2015 9:22:17 AM com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource updateInstanceState INFORMACI?N: new definitions file path: /usr/local/CEP/set1.json may 20, 2015 9:22:17 AM com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource performServiceCall INFORMACI?N: performing request: http://localhost:8080/manager/text/start?path=/ProtonOnWebServer may 20, 2015 9:22:17 AM com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource updateInstanceState INFORMACI?N: finished updateInstanceState may 20, 2015 9:22:33 AM com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource updateInstanceState INFORMACI?N: starting updateInstanceState may 20, 2015 9:22:33 AM com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource updateInstanceState INFORMACI?N: perfoming action: change state to stop may 20, 2015 9:22:33 AM com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource performServiceCall INFORMACI?N: performing request: http://localhost:8080/manager/text/stop?path=/ProtonOnWebServer may 20, 2015 9:22:33 AM com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource updateInstanceState INFORMACI?N: finished updateInstanceState may 20, 2015 9:22:45 AM com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource updateInstanceState INFORMACI?N: starting updateInstanceState may 20, 2015 9:22:45 AM com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource updateInstanceState INFORMACI?N: perfoming action: change state to start may 20, 2015 9:22:45 AM com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource performServiceCall INFORMACI?N: performing request: http://localhost:8080/manager/text/start?path=/ProtonOnWebServer may 20, 2015 9:22:45 AM com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource updateInstanceState INFORMACI?N: finished updateInstanceState may 20, 2015 9:28:05 AM com.ibm.hrl.proton.webapp.providers.EventJSONMessageReader readFrom INFORMACI?N: started event message body reader may 20, 2015 9:28:06 AM com.ibm.hrl.proton.webapp.providers.EventJSONMessageReader readFrom GRAVE: Could not parse json event org.apache.wink.json4j.JSONException: The key [Name] was not in the map, reason: The key [Name] was not in the map may 20, 2015 9:38:52 AM com.ibm.hrl.proton.webapp.providers.EventXmlNgsiMessageReader readFrom INFORMACI?N: started event message body reader may 20, 2015 9:38:52 AM com.ibm.hrl.proton.webapp.providers.EventXmlNgsiMessageReader readFrom INFORMACI?N: Event: TripContextUpdate may 20, 2015 9:38:52 AM com.ibm.hrl.proton.webapp.providers.EventXmlNgsiMessageReader readFrom GRAVE: Could not parse XML NGSI event java.lang.NullPointerException, reason: null last attribute name: null last value: null may 20, 2015 9:38:52 AM com.ibm.hrl.proton.webapp.providers.EventXmlNgsiMessageReader readFrom INFORMACI?N: finished event message body reader may 20, 2015 9:38:52 AM com.ibm.hrl.proton.webapp.resources.EventResource submitNewEvent INFORMACI?N: starting submitNewEvent may 20, 2015 9:38:52 AM com.ibm.hrl.proton.webapp.resources.EventResource submitNewEvent GRAVE: Could not send event, reason: java.lang.NullPointerException, message: null -- -------------- next part -------------- An HTML attachment was scrubbed... URL: From carlos at secmotic.com Wed Jul 1 10:25:47 2015 From: carlos at secmotic.com (Carlos Corrales) Date: Wed, 1 Jul 2015 10:25:47 +0200 Subject: [Fiware-finodex-coaching] Problems with PEP Proxy and Orion Context Broker Message-ID: Hi Finodex Fiware team, We meet last week in Trento, and I told you some issues we had while implementing PEP Proxy + Orion Context Broker. The main problem we are having was that we want to subscribe an user to changes in a sensor value that is stored in Orion. To secure the access, we included a security module composed by PEP Proxy (Wilma), IdM (Keyrock) and Authorization PDP (AuthZForce). We are able to query context and receive the value in the user side, but we are not able to make the changes get to the users when they are not requesting them directly. In Orion Context Broker, there is an option to subscribe to different events. We are able to subscribe the user but, when there is a change and Orion tries to notify the user, this notification dies in the PEP Proxy. We tried contacting Alvaro Alonso (aalonsog at dit.upm.es), which is the Wilma PEP Proxy developer, and he told us that PEP Proxy is only able to create connections in one direction, meaning that if the user starts the communication, the answers will be able to get the user, but it is not possible to do it in case the one that starts the communication is Orion. We are thinking about sending queries periodically to Orion to check if there was any alert, but we are not sure if you have any suggestion for us, because we are a little bit lost here. Best regards -- Carlos Corrales Cofounder Secmotic Innovation S.L. http://www.secmotic.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From ibon.salbi at gmail.com Wed Jul 1 19:20:09 2015 From: ibon.salbi at gmail.com (Ibon Salbidegoitia) Date: Wed, 1 Jul 2015 17:20:09 +0000 Subject: [Fiware-finodex-coaching] W3DS - FIWARE In-Reply-To: References: Message-ID: Hi Sami, First of all, as I mentioned in a previous email, I have put in Cc our Fiware Accelerator (Finodex) coaches as they requested in a meeting with them to follow the situation of each project that they are supporting. About your previous email, the last release is working! I have test it in our test server (http://151.80.143.120/GIS_4.3.3/) and the DEM works with the data provided as test. I have checked that the test requires the textures to have "texture" on their names and "DEM" for terrain DEM. I have upload my data to test it but I have the following problems: 1. When I preview your DEM (DEM_geotiff_terrain_EPSG3067) I can see on geoserver a grayscale image on openlayers (openlayers example ). I have seen that the tiff is a float32 image in grayscale with a 281.604 minimum value and 792.834 maximum value . I have upload a similar DEM called "DEM_ODE_terrain" that it can be selected from the DEM GIS Client example (on previous link). This image is also float32 tiff with a minimum value of -3.40282e+38 and maximum of 1545.84, where minimum value is a NoData value as it is shown with gdalinfo command: NoData Value=-3.4028234663852886e+38 The TIF image I use it can be found here: ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip The geodesic system of this TIF is ETRS89 that correponds to SRS EPSG:25830. However the preview seems to be a 0-1 grayscale image as you can see here (takes some seconds as it is big). This could be due to the NoData values that make range so big not taking into account that the data does not exist. This is correct? 2. The Terrain texture also has been uploaded to Geoserver as can be seen here . The DEM testing client gives the oportunity to select both layers mentioned (for terrain DEM + terrain texture), however nothing appears, only one small gray square looking upwards (on zenith) with the camera on the client as the altitudes are higher than the ones from the examples. So everything from test seems to work correctly, but when I introduce my data, the DEM test client does not seem to work. Could it be due to NoData values? Anyway, why the ortophoto inserted is shown as gray layer? Best regards, Ibon 2015-06-30 11:33 GMT+00:00 Sami J : > Hi Ibon, > sorry about late response. We have now made new release from both server > and example client, these can be found from the forge under *MIWI-GISDataProvider > 4.3.3*-release: https://forge.fiware.org/frs/?group_id=7 > source code has been uploaded also to the github. > > Short documentation related using DEM images can be found from: > http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide#World_Wind_Format_Module > > Installation document covers how to upload DEM image to geoserver: > http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Installation_and_Administration_Guide#GeoTIFF_based_.28DEM.29_data_sets_for_elevation > > > Regarding using latitude/longitude coordinates, I don't know if you are > using them or not. I just wanted to mention this if you haven't noticed > this information from the GIS GE documentation :) To elaborate further, > provided GIS GE example web client has been implemented so that it works > correctly only with metric coordinate system. Using lat/long data source > won't work with the provided client, and that's why lat/long coordinate > handling needs to be implemented by yourself. But as said, I don't know if > you are using data source based in latitude/longitudes or metric > coordinates. > > > Best regards, > Sami > > On Thu, Jun 25, 2015 at 11:53 AM, Ibon Salbidegoitia > wrote: > >> Hi Sami, >> >> I have a couple of things to ask. >> >> 1. It is great that the grayscale images for elevation is pretty much >> ready. Can you tell me when do you expect to finish the test and when I can >> be able to test it? >> 2. About the last paragraph, I do not understand why you tell me that >> lat/long is not supported. Where I have used it? Do you refer to the >> bounding box of the layers I have upload? So do I have to change the SRS to >> EPSG:25830 for example instead of EPSG:4326? >> >> Best regards, >> Ibon >> >> >> 2015-06-24 14:22 GMT+00:00 Sami J : >> >>> Hi Ibon, >>> ok now it's clear; in a short problem is that elevation data in >>> grayscale image is not yet supported by the GIS GE. >>> >>> The good thing is that implementation for it is pretty much ready, we >>> are doing final testing for it and then documentation will be updated. So >>> soon it is possible to use grayscale elevation images as for source to >>> elevation data, GIS GE implementation supports same data format as SRTM >>> data uses. GIS GE will send response data in octet-stream format, client >>> itself needs to create 3D objects based on the octet-stream data. >>> >>> please note that current version of the GIS GE reference web client only >>> supports metric coordinates, Lat/log is not working. I mention this because >>> if you'd like to use GIS data in Lat/Log format, the client scenemanager >>> logic needs to be re-implemented. >>> >>> Best regards, >>> Sami >>> >>> >>> On Wed, Jun 24, 2015 at 10:10 AM, Ibon Salbidegoitia < >>> ibon.salbi at gmail.com> wrote: >>> >>>> Hi Sami, >>>> >>>> I have upload the ortophoto on "fiware" workspace and also texture with >>>> appropriate names to be able to see them in my Client examples: >>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml >>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml >>>> >>>> As you will see, selecting the terrain texture, the new layer appears >>>> (surprisingly, the one of other workspace also). But if I try to select the >>>> terrain layer (first box of GIS client), you will see that the one uploaded >>>> with the name "ODE_test_terrain" does not appear. Maybe I didn't explain >>>> correctly in my previous email, but this layer is the altitude layer, the >>>> shape. So I suppose that the W3DS options have to be defined, but if you >>>> access to that layer on our testing server ( >>>> http://151.80.143.120:8080/geoserver . User: admin Pass: geoserver) >>>> you will see that I cannot access to the W3DS tab of "ODE_test_terrain" >>>> layer to make it "Active" and "Queryable" and maybe other options required >>>> on the GIS client to be able to require it as the shape of the terrain. >>>> >>>> Which could be the problem? >>>> >>>> Just one more thing. I am selected on one of the FIWARE accelerators >>>> (Finodex) to develop services with Fiware tools. As you imagine, this >>>> enabler is one that I am using. They required me to put them (fiware >>>> coaches of Finodex accelerator) in CC on this discussion emails to follow >>>> the evolution of our project. So I will put them in CC on the next email. I >>>> suppose there is no problem on this, is it? >>>> >>>> Best regards, >>>> Ibon >>>> >>>> >>>> 2015-06-23 8:38 GMT+02:00 Sami J : >>>> >>>>> Hi Ibon, >>>>> thank you for the feedback, I need to update user guide about this >>>>> issue. Textures are queried via geoserver's WMS-interface. This interface >>>>> isn't related to W3DS-module and therefore there's no need to declare >>>>> W3DS related options for the texture layer. So when you define >>>>> texture layer which you want to use as a texture for 3D terrain, it is >>>>> enough to define options under "Data"-tab. >>>>> >>>>> Best regards, >>>>> Sami >>>>> >>>>> On Mon, Jun 22, 2015 at 6:21 PM, Ibon Salbidegoitia < >>>>> ibon.salbi at gmail.com> wrote: >>>>> >>>>>> Hi Sami, >>>>>> >>>>>> Thank you. Yes I knew that because I saw it in the JS code you >>>>>> mention. >>>>>> I was going to change the ortophoto and texture to workspace to >>>>>> "fiware" for that reason, but being honest I didn't test it because I found >>>>>> the error I described in my previous email. I mean, I was trying to access >>>>>> the texture layer W3DS tab to make it "Active" and "Queryable" as required >>>>>> on the wiki, so that's the reason I sent you the error, because I though >>>>>> that it wouldn't be possible to go ahead without changing the texture the >>>>>> configuration. >>>>>> >>>>>> So, if I am wrong and it is not necessary to configure the W3DS tab, >>>>>> I will try it. I don't need from you to change the JS code to find texture >>>>>> and photos of all the workspace. I will change the data to "fiware" >>>>>> workspae. >>>>>> >>>>>> I will tell you if everything goes well. >>>>>> Best regards, >>>>>> >>>>>> Ibon >>>>>> >>>>>> >>>>>> 2015-06-22 9:05 GMT+02:00 Sami J : >>>>>> >>>>>>> Hi Ibon, >>>>>>> nice to hear you have been able to progress in your work! >>>>>>> >>>>>>> Let me answer behalf Juha: Your texture data seems to be ok. In case >>>>>>> you are using GIS GE reference client problem with the texture loading >>>>>>> might be with the used workspace. GIS GE reference client assumes that all >>>>>>> data is in "fiware"-workspace. This applies also for the textures. So >>>>>>> changing texture workspace to "fiware" might solve loading problem. >>>>>>> >>>>>>> If you'd like to modify reference client to support also other >>>>>>> workspaces, URI for texture loading is defined in the scenemngr.js >>>>>>> getElements-function. You can modify URL created in there. >>>>>>> >>>>>>> Best regards, >>>>>>> Sami >>>>>>> >>>>>>> >>>>>>> On Mon, Jun 22, 2015 at 9:05 AM, Juha Hyv?rinen < >>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>> >>>>>>>> >>>>>>>> ---------- Forwarded message ---------- >>>>>>>> From: Ibon Salbidegoitia >>>>>>>> Date: Thu, Jun 18, 2015 at 11:05 AM >>>>>>>> Subject: Re: W3DS - FIWARE >>>>>>>> To: Juha Hyv?rinen >>>>>>>> >>>>>>>> >>>>>>>> Hi Juha, >>>>>>>> >>>>>>>> I checked that many changes where done on the data and wiki. >>>>>>>> Congratulations! Now everything is very clear! >>>>>>>> >>>>>>>> I write you because I have some doubts about the texture data. On >>>>>>>> the wiki "User and Programmers Guide" section "3.3.3 Adding texture" the >>>>>>>> last sentence says that one option is to store texture on a GeoTIFF. >>>>>>>> I used the following GeoTIFF texture (MDT) data on float32 format >>>>>>>> to try it. You can download it here: >>>>>>>> ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip >>>>>>>> >>>>>>>> The file has been uploaded to Geoserver. As it does not recognize >>>>>>>> the SRS, I defined whichis the EPSG:25830. >>>>>>>> As it says in the Unit Testing Plan, I have to go to W3DS tab to >>>>>>>> activate and make it queryable. >>>>>>>> However, it returns an error on JIRA. >>>>>>>> >>>>>>>> You can check it in our geoserver: >>>>>>>> http://151.80.143.120:8080/geoserver/ >>>>>>>> + User: admin >>>>>>>> + Pass: geoserver >>>>>>>> >>>>>>>> The GeoTIFF texture is defined on the layer "terrain" , on >>>>>>>> workspace "ODE" >>>>>>>> Please let me know why this option is not available. >>>>>>>> Best regards, >>>>>>>> >>>>>>>> Ibon >>>>>>>> >>>>>>>> >>>>>>>> 2015-06-02 18:20 GMT+02:00 Ibon Salbidegoitia >>>>>>> >: >>>>>>>> >>>>>>>>> Hi Juha, >>>>>>>>> >>>>>>>>> I have been able to run GIS Client examples: >>>>>>>>> + >>>>>>>>> http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml >>>>>>>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml >>>>>>>>> >>>>>>>>> As you can see in the attached pictures, there seems to be some >>>>>>>>> problems with space between layers and I cannot see the xml3d buildings on >>>>>>>>> the examples. >>>>>>>>> Do you know where the buildings should appear? >>>>>>>>> >>>>>>>>> >>>>>>>>> Just as comment, I have found more bugs that may improve the Unit >>>>>>>>> Testing Plan. I list all of them below if you are interested on changing >>>>>>>>> them >>>>>>>>> >>>>>>>>> *On wiki*: >>>>>>>>> 1.2.2.4 PostGIS connection to GeoServer >>>>>>>>> + When Publish fiware_test_terrain PostGIS - PostGIS Database >>>>>>>>> In "Objects Attributes" section select "name" for the >>>>>>>>> "Object ID" it is not possible because only options are [elevation / geom / >>>>>>>>> lod]. The documentation seems to need to select "name" when it does not >>>>>>>>> exist. >>>>>>>>> >>>>>>>>> 1.2.3.2 terrain_texture_orto.tif and terrain_texture_raster.tif >>>>>>>>> + Raster_map_image_for_terrain_texture/terrain_texture_raster.tif >>>>>>>>> SRS is automatically set to EPSG:404000. Not EPSG:3067 as it >>>>>>>>> is said on the wiki >>>>>>>>> + Aero_photo_for_terrain_texture/terrain_texture_orto.tif >>>>>>>>> SRS is automatically set to EPSG:3067. Not EPSG:404000 as it >>>>>>>>> is said on the wiki >>>>>>>>> >>>>>>>>> *On GIS Client*: >>>>>>>>> Version 4.3.2 >>>>>>>>> + The both examples () have changed the script "map.js" and now >>>>>>>>> it is not automatically defined "baseUrl" variable as previous version >>>>>>>>> 4.2.2. It will be recommended to use the code lines: >>>>>>>>> var ip = location.host; >>>>>>>>> var baseUrl = "http://"+ip+"/geoserver/"; >>>>>>>>> >>>>>>>>> *On MIWI-GISDataProvider download section*: >>>>>>>>> + Version 4.3.2 >>>>>>>>> - Test assest 4.3.2 ZIP file has a space between text and >>>>>>>>> version numbers -> >>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>> - ZIP file when decompressed has a folder with a space >>>>>>>>> between text ("rel") and numbers ("4.3.2") -> rel\ 4.3.2 >>>>>>>>> - Subfolders of Test_assest "Building_coordinates /" and >>>>>>>>> "PostGIS_database_backup /" have a space at the end of the name. >>>>>>>>> + Version 4.2.2 >>>>>>>>> - Subfolders of Test_assest "Building_coordinates /" and >>>>>>>>> "PostGIS_database_backup /" have a space at the end of the name. >>>>>>>>> >>>>>>>>> Best regards, >>>>>>>>> >>>>>>>>> Ibon >>>>>>>>> >>>>>>>>> >>>>>>>>> 2015-06-02 11:59 GMT+00:00 Juha Hyv?rinen < >>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>> >>>>>>>>>> Hi Ibon, >>>>>>>>>> >>>>>>>>>> Thank you for feedback about test asset naming problems, I wasn't >>>>>>>>>> aware of those and I have informed my colleague who have made those >>>>>>>>>> packages. He will fix those tomorrow. >>>>>>>>>> >>>>>>>>>> Building coordinates are needed if you want to use external 3D >>>>>>>>>> models in your application with real spatial information. For example hand >>>>>>>>>> made building models placed in correct position etc. If you don't need >>>>>>>>>> those then that step is optional. >>>>>>>>>> >>>>>>>>>> We also updated guide for database restoring and it can be found >>>>>>>>>> from here: >>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan#Import_PostGIS_database_backup_with_terrain_data >>>>>>>>>> >>>>>>>>>> Your problem was that username in the database backup was defined >>>>>>>>>> to be 'sami' and it does not exist in your system. It is fixed by ignoring >>>>>>>>>> username from the database backup. >>>>>>>>>> >>>>>>>>>> Before restoring that database backup you should drop >>>>>>>>>> fiware_test_terrain table. >>>>>>>>>> >>>>>>>>>> Let me know if this was helpful. >>>>>>>>>> >>>>>>>>>> - Juha >>>>>>>>>> >>>>>>>>>> On Tue, Jun 2, 2015 at 11:41 AM, Ibon Salbidegoitia < >>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>> >>>>>>>>>>> Sorry I send previous email without finishing the email as >>>>>>>>>>> error. You have below all the email. >>>>>>>>>>> >>>>>>>>>>> Hi Juha, >>>>>>>>>>> >>>>>>>>>>> Sorry for the delay, I was busy and these last 3 days I had some >>>>>>>>>>> problems with tomcat so I decided to format everything and start from the >>>>>>>>>>> beginning to know what errors are happening. >>>>>>>>>>> I will try to explain cronologically all the steps and >>>>>>>>>>> error/bugs found. >>>>>>>>>>> >>>>>>>>>>> First of all I update git repository and change to the >>>>>>>>>>> "fiware_rel_4.x" branch to create the WAR file with the maven command: mvn >>>>>>>>>>> install -DdownloadSources=true -DskipTests=true -Pw3ds >>>>>>>>>>> After restarting tomcat, the geoserver seems to work -> >>>>>>>>>>> http://151.80.143.120:8080/geoserver (User: admin / >>>>>>>>>>> Pass: geoserver) >>>>>>>>>>> I did not use the WAR published, I created my own from the new >>>>>>>>>>> github branch as you see. >>>>>>>>>>> >>>>>>>>>>> So then I decided to update the test unit plan. Here I have one >>>>>>>>>>> comment just to improve in case you want. I have checked that you usually >>>>>>>>>>> use "space" on folders and files which usually is no suitable. I refer >>>>>>>>>>> specificly to the 4.3.2 version. >>>>>>>>>>> + The ZIP file has a "space" on the name what requires to use >>>>>>>>>>> ASCI character to download: wget --no-check-certificate >>>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>> + When ZIP is decompressed, the name of the folder has also a >>>>>>>>>>> "space": /home/UnitTestPlan/rel\ 4.3.2 >>>>>>>>>>> + PostGIS database backup has also a "space" at the >>>>>>>>>>> end: /home/UnitTestPlan/rel\ 4.3.2/PostGIS_database_backup\ / >>>>>>>>>>> >>>>>>>>>>> Any way, I continue with the database restore. On the PostGIS >>>>>>>>>>> database backup, I checked on the 4.3.2 version that there are 2 >>>>>>>>>>> files: building_coordinates and test_asset-terrain. >>>>>>>>>>> The "building_coordinates" file appears to be a text format >>>>>>>>>>> dump. So is this file necessary to upload to database? >>>>>>>>>>> The "test_asset-terrain" could be uploaded to postgres with the >>>>>>>>>>> following command: pg_restore -d fiware_test /home/UnitTestPlan/rel\ >>>>>>>>>>> 4.3.2/PostGIS_database_backup\ /FIWARE-postgis-test_asset-terrain >>>>>>>>>>> However, I receive the following errors: >>>>>>>>>>> ================================================= >>>>>>>>>>> pg_restore: [archiver (db)] Error while PROCESSING TOC: >>>>>>>>>>> pg_restore: [archiver (db)] Error from TOC entry 184; 1259 65659 >>>>>>>>>>> TABLE fiware_test_terrain sami >>>>>>>>>>> pg_restore: [archiver (db)] could not execute query: ERROR: >>>>>>>>>>> role "sami" does not exist >>>>>>>>>>> Command was: ALTER TABLE public.fiware_test_terrain OWNER TO >>>>>>>>>>> sami; >>>>>>>>>>> >>>>>>>>>>> pg_restore: [archiver (db)] Error from TOC entry 183; 1259 65657 >>>>>>>>>>> SEQUENCE fiware_test_terrain_id_seq sami >>>>>>>>>>> pg_restore: [archiver (db)] could not execute query: ERROR: >>>>>>>>>>> role "sami" does not exist >>>>>>>>>>> Command was: ALTER TABLE public.fiware_test_terrain_id_seq >>>>>>>>>>> OWNER TO sami; >>>>>>>>>>> >>>>>>>>>>> WARNING: errors ignored on restore: 2 >>>>>>>>>>> ================================================= >>>>>>>>>>> >>>>>>>>>>> I checked the information stored from backup on the database and >>>>>>>>>>> found the following tables, which I am not sure if they are all or there >>>>>>>>>>> are some missing. >>>>>>>>>>> ================================================= >>>>>>>>>>> List of relations >>>>>>>>>>> Schema | Name | Type | Owner >>>>>>>>>>> --------+----------------------------+----------+---------- >>>>>>>>>>> public | fiware_test_terrain | table | postgres >>>>>>>>>>> public | fiware_test_terrain_id_seq | sequence | postgres >>>>>>>>>>> public | geography_columns | view | postgres >>>>>>>>>>> public | geometry_columns | view | postgres >>>>>>>>>>> public | raster_columns | view | postgres >>>>>>>>>>> public | raster_overviews | view | postgres >>>>>>>>>>> public | spatial_ref_sys | table | postgres >>>>>>>>>>> ================================================= >>>>>>>>>>> >>>>>>>>>>> I did not continue because it seems that there are some errors >>>>>>>>>>> that I should first understand and fix before continuing. >>>>>>>>>>> If you need something else from my side, please let me know. And >>>>>>>>>>> please, let me know if I have done something wrong. >>>>>>>>>>> Thank you. Best regards, >>>>>>>>>>> >>>>>>>>>>> Ibon >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> 2015-06-02 8:33 GMT+00:00 Ibon Salbidegoitia < >>>>>>>>>>> ibon.salbi at gmail.com>: >>>>>>>>>>> >>>>>>>>>>>> Hi Juha, >>>>>>>>>>>> >>>>>>>>>>>> Sorry for the delay, I was busy and these last 3 days I had >>>>>>>>>>>> some problems with tomcat so I decided to format everything and start from >>>>>>>>>>>> the beginning to know what errors are happening. >>>>>>>>>>>> I will try to explain cronologically all the steps and >>>>>>>>>>>> error/bugs found. >>>>>>>>>>>> >>>>>>>>>>>> First of all I update git repository and change to the >>>>>>>>>>>> "fiware_rel_4.x" branch to create the WAR file with the maven command: mvn >>>>>>>>>>>> install -DdownloadSources=true -DskipTests=true -Pw3ds >>>>>>>>>>>> After restarting tomcat, the geoserver seems to work -> >>>>>>>>>>>> http://151.80.143.120:8080/geoserver (User: admin / >>>>>>>>>>>> Pass: geoserver) >>>>>>>>>>>> I did not use the WAR published, I created my own from the new >>>>>>>>>>>> github branch as you see. >>>>>>>>>>>> >>>>>>>>>>>> So then I decided to update the test unit plan. Here I have one >>>>>>>>>>>> comment just to improve in case you want. I have checked that you usually >>>>>>>>>>>> use "space" on folders and files which usually is no suitable. I refer >>>>>>>>>>>> specificly to the 4.3.2 version. >>>>>>>>>>>> + The ZIP file has a "space" on the name what requires to >>>>>>>>>>>> use ASCI character to download: wget --no-check-certificate >>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>>> + When ZIP is decompressed, the name of the folder has also >>>>>>>>>>>> a "space": /home/UnitTestPlan/rel\ 4.3.2 >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> 2015-05-26 12:49 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>> >>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>> >>>>>>>>>>>>> That problem should now be fixed, code is in the github ( >>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver/tree/fiware_rel_4.x) >>>>>>>>>>>>> and we have also published new war file in Fiware FusionForge ( >>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1643/geoserver.war). >>>>>>>>>>>>> >>>>>>>>>>>>> We also updated test assets and reference client. Updated >>>>>>>>>>>>> reference client is already available from the Github and test assets will >>>>>>>>>>>>> be published later today or tomorrow morning to FusionForge under release >>>>>>>>>>>>> 4.3.2 (https://forge.fiware.org/frs/?group_id=7). >>>>>>>>>>>>> >>>>>>>>>>>>> I hope that this release will fix problems you encountered >>>>>>>>>>>>> earlier. Please report back did this solve those problems. Thank you for >>>>>>>>>>>>> submitting these bug reports. >>>>>>>>>>>>> >>>>>>>>>>>>> - Juha >>>>>>>>>>>>> >>>>>>>>>>>>> On Tue, May 26, 2015 at 9:33 AM, Juha Hyv?rinen < >>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>> >>>>>>>>>>>>>> We have looked into that problem now for couple of days and >>>>>>>>>>>>>> it seems to be somehow related to Tomcat and system locale settings. We can >>>>>>>>>>>>>> reproduce same problem when we deploy to a Tomcat instance while with Jetty >>>>>>>>>>>>>> everything works just fine. >>>>>>>>>>>>>> >>>>>>>>>>>>>> I'm working with the fix now, but there is also a workaround: >>>>>>>>>>>>>> deploy war package to a Jetty instance. >>>>>>>>>>>>>> >>>>>>>>>>>>>> I will notify you once I have pushed code changes to git. >>>>>>>>>>>>>> >>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Fri, May 22, 2015 at 1:08 PM, Juha Hyv?rinen < >>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> I also forgot to mention that you should move to newer test >>>>>>>>>>>>>>> client which we will release officially during summer, but code is already >>>>>>>>>>>>>>> available from the Github: >>>>>>>>>>>>>>> https://github.com/Cyberlightning/Cyber-WeX >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Client code can be found from here: >>>>>>>>>>>>>>> https://github.com/Cyberlightning/Cyber-WeX/tree/master/GIS/GIS_Client_xml3d >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Fri, May 22, 2015 at 12:30 PM, Juha Hyv?rinen < >>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I have to admit that I'm clueless with that terrain >>>>>>>>>>>>>>>> problem, since I couldn't replicate it. Everything seems to be right at the >>>>>>>>>>>>>>>> server side but still data is somehow corrupted when it arrives to the >>>>>>>>>>>>>>>> client. We have deployed that same data set without any problems to more >>>>>>>>>>>>>>>> than 20 different systems by many different users during our internal >>>>>>>>>>>>>>>> development and testing. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> There are still few points which you could try. >>>>>>>>>>>>>>>> 1. Install newer PostGIS version for example from Ubuntu >>>>>>>>>>>>>>>> repositories instead of manually build one. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> 2. Try our upcoming release of Geoserver from Github. This >>>>>>>>>>>>>>>> shouldn't be difficult, since you already build your own version. >>>>>>>>>>>>>>>> If you used git to clone code earlier, you only need to >>>>>>>>>>>>>>>> pull new changes from the repository and change code branch from fiware to >>>>>>>>>>>>>>>> fiware_rel_4.x (git pull && git checkout fiware_rel_4.x) and rebuild >>>>>>>>>>>>>>>> project. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Also I created database dump from building coordinates >>>>>>>>>>>>>>>> table and it's as an attachment. We will add it also to the assets and >>>>>>>>>>>>>>>> update documentation once we have little spare time to do it. Table can be >>>>>>>>>>>>>>>> restored with command: sudo -u postgres psql databasename < >>>>>>>>>>>>>>>> path/to/the/file.sql >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Before restoring that dumb, change URLs in it to point a >>>>>>>>>>>>>>>> place where you actually have that xml file. At the moment URL is >>>>>>>>>>>>>>>> http://localhost/Test_asset/Building_model/building.xml >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Thu, May 21, 2015 at 1:09 PM, Ibon Salbidegoitia < >>>>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> You are right, I forgot to edit the tomcat7 default >>>>>>>>>>>>>>>>> start-up configuration file. >>>>>>>>>>>>>>>>> Now is using openJDK. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> 2015-05-21 9:36 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Could you restart tomcat again since it still uses Oracle >>>>>>>>>>>>>>>>>> java 1.8. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Thu, May 21, 2015 at 10:57 AM, Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I checked that tomcat was down due to low xmx size. I >>>>>>>>>>>>>>>>>>> restarted and modify xmx to avoid errors. >>>>>>>>>>>>>>>>>>> Asnwering to your comments: >>>>>>>>>>>>>>>>>>> + Please let me know when you update the >>>>>>>>>>>>>>>>>>> documentation to check importin building coordinates >>>>>>>>>>>>>>>>>>> + I imported with following command of postgres: >>>>>>>>>>>>>>>>>>> $ su - postgres >>>>>>>>>>>>>>>>>>> $ createdb fiware_test >>>>>>>>>>>>>>>>>>> $ pg_restore -d fiware_test >>>>>>>>>>>>>>>>>>> ./Test_asset_3.3/PostGIS_database_backup\ /FIWARE-postgis-test_asset >>>>>>>>>>>>>>>>>>> Because I am using remote server I cannot use >>>>>>>>>>>>>>>>>>> pgadmin, but the import was correct without errors and I checked that the >>>>>>>>>>>>>>>>>>> data was correct. >>>>>>>>>>>>>>>>>>> + I am using Oracle java (1.8.0_31), so I will change >>>>>>>>>>>>>>>>>>> it to openJDK7 as you recommend. Now is changed to openJDK7 to version >>>>>>>>>>>>>>>>>>> 1.7.0_79 >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> As I said, the Geoserver is active, so you can check on >>>>>>>>>>>>>>>>>>> it whatever you want. >>>>>>>>>>>>>>>>>>> Kind regards, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> 2015-05-21 6:56 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> I was looking into those errors you reported but your >>>>>>>>>>>>>>>>>>>> server went down before I could figure out any final solution. Here are my >>>>>>>>>>>>>>>>>>>> thoughts so far. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> I noticed that something have went wrong at least with >>>>>>>>>>>>>>>>>>>> building coordinate importing and we will update documentation how to >>>>>>>>>>>>>>>>>>>> import those properly. I can notice you once that is done. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> I also would like to make sure that >>>>>>>>>>>>>>>>>>>> fiware:fiware_test_terrain is data set provided by us and you imported it >>>>>>>>>>>>>>>>>>>> to the database as instructed with pgAdmin? >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Third point: in the past I had some problems with >>>>>>>>>>>>>>>>>>>> Geoserver when we used Oracle java, so please make sure that you use >>>>>>>>>>>>>>>>>>>> openJDK7. You can check used Java version with commad: >>>>>>>>>>>>>>>>>>>> java -version >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> result should be something similar: >>>>>>>>>>>>>>>>>>>> ----------------- >>>>>>>>>>>>>>>>>>>> :~$ java -version >>>>>>>>>>>>>>>>>>>> java version "1.7.0_79" >>>>>>>>>>>>>>>>>>>> OpenJDK Runtime Environment (IcedTea 2.5.5) >>>>>>>>>>>>>>>>>>>> (7u79-2.5.5-0ubuntu0.14.04.2) >>>>>>>>>>>>>>>>>>>> OpenJDK 64-Bit Server VM (build 24.79-b02, mixed mode) >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> If not, change default java version with command: >>>>>>>>>>>>>>>>>>>> sudo update-alternatives --config java >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Mon, May 18, 2015 at 10:34 AM, Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> The last couple of months I have been learning and >>>>>>>>>>>>>>>>>>>>> understanding all the things that we discussed 2 months ago. >>>>>>>>>>>>>>>>>>>>> Once I knew how to do most of the things, I tried to >>>>>>>>>>>>>>>>>>>>> do the "Unit Testing Plan" from the Wiki ( >>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan >>>>>>>>>>>>>>>>>>>>> ) >>>>>>>>>>>>>>>>>>>>> I have found some bugs/errors that I think they should >>>>>>>>>>>>>>>>>>>>> be corrected if possible: >>>>>>>>>>>>>>>>>>>>> + Section: 1.2.2.3 PostGIS connection to GeoServer >>>>>>>>>>>>>>>>>>>>> + terrain_texture_raste has a EPSG:404000 SRS (set by >>>>>>>>>>>>>>>>>>>>> default) >>>>>>>>>>>>>>>>>>>>> + terrain_texture_orto has a EPSG:3067 SRS (set by >>>>>>>>>>>>>>>>>>>>> default) >>>>>>>>>>>>>>>>>>>>> + Section: 1.2.3.2 terrain_texture_orto.tif and >>>>>>>>>>>>>>>>>>>>> terrain_texture_raster.tif >>>>>>>>>>>>>>>>>>>>> + On building_coordinates SRS is not automatically >>>>>>>>>>>>>>>>>>>>> assigned >>>>>>>>>>>>>>>>>>>>> + On building_coordinates table, when SRS EPSG:3047 >>>>>>>>>>>>>>>>>>>>> value is introduced manually, the "Bounding Box" values seem to be wrong >>>>>>>>>>>>>>>>>>>>> assigned >>>>>>>>>>>>>>>>>>>>> + Select Activate and Queryable in the W3DS Settings, >>>>>>>>>>>>>>>>>>>>> it is not clear if it is for both tables >>>>>>>>>>>>>>>>>>>>> + In Objects Attributes select name for the Object ID. >>>>>>>>>>>>>>>>>>>>> Only for building_coordinates table, because fiware_test_terrain table has >>>>>>>>>>>>>>>>>>>>> not got this Object ID. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I have follow everything sucessfully but at the end, >>>>>>>>>>>>>>>>>>>>> it is not possible to see the correct result ( >>>>>>>>>>>>>>>>>>>>> http://151.80.143.120/GIS/). I am not sure if it is >>>>>>>>>>>>>>>>>>>>> for the "building_coordinates" bounding box values or what. >>>>>>>>>>>>>>>>>>>>> You can check on Geoserver that everything is correct ( >>>>>>>>>>>>>>>>>>>>> http://151.80.143.120/geoserver User: admin Pass: >>>>>>>>>>>>>>>>>>>>> geoserver. The server is a server to test this W3DS service only, so you >>>>>>>>>>>>>>>>>>>>> can use it without any problems) >>>>>>>>>>>>>>>>>>>>> So something seems that it is not correctly working. >>>>>>>>>>>>>>>>>>>>> What can it be? (All the data was correctly imported to PostGIS without >>>>>>>>>>>>>>>>>>>>> errors) >>>>>>>>>>>>>>>>>>>>> Thank you in advance. Best regards, >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> 2015-03-26 7:42 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I have been out of office and didn't have time to >>>>>>>>>>>>>>>>>>>>>> reply earlier. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> EPSG:900913 is map projection defined by Google and >>>>>>>>>>>>>>>>>>>>>> it's using lat/lon coordinates. At the moment requesting data from >>>>>>>>>>>>>>>>>>>>>> non-metric coordinate systems will result erroneous output. Some projection >>>>>>>>>>>>>>>>>>>>>> tools may use that as a default projection if it's undefined. I suggest >>>>>>>>>>>>>>>>>>>>>> that you check your projection definitions from importing code and if you >>>>>>>>>>>>>>>>>>>>>> didn't set any coordinate system set one. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I also quickly checked that one tile you provided and >>>>>>>>>>>>>>>>>>>>>> there was a lot no-data values. You could probably get better results if >>>>>>>>>>>>>>>>>>>>>> you select input data from area where there are actually data to show. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Please note that only UTM coordinate systems (or >>>>>>>>>>>>>>>>>>>>>> similar) are supported by W3DS module. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> For visualization you can use sample client provided >>>>>>>>>>>>>>>>>>>>>> within FIWARE project. It is quite simple and you shouldn't have any >>>>>>>>>>>>>>>>>>>>>> problems to understand how it does requests to the server and visualize >>>>>>>>>>>>>>>>>>>>>> received 3D data. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Wed, Mar 18, 2015 at 10:11 AM, Ibon Salbidegoitia >>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I have been searching and found that my data is >>>>>>>>>>>>>>>>>>>>>>> in EPSG:900913 and now the layer is published and I can see it. >>>>>>>>>>>>>>>>>>>>>>> Is this the correct way to publish it? >>>>>>>>>>>>>>>>>>>>>>> So now, I am supposed to use the 3D capabilities to >>>>>>>>>>>>>>>>>>>>>>> visualize in 3D. I have checked the XML3D link that you sent me but I don't >>>>>>>>>>>>>>>>>>>>>>> understand how I have to apply to visualize the layer in 3D. >>>>>>>>>>>>>>>>>>>>>>> Can you please be more specific or give me some help? >>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Kind regards, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> 2015-03-18 7:13 GMT+00:00 Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com>: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I have been able to introduce the XYZ files (*.asc >>>>>>>>>>>>>>>>>>>>>>>> in my case) to the Postgre database with the PostGIS extension. >>>>>>>>>>>>>>>>>>>>>>>> I am able to see the layer from the Geoserver but I >>>>>>>>>>>>>>>>>>>>>>>> have some doubts about the data to be introduced that I don't know how to >>>>>>>>>>>>>>>>>>>>>>>> fill when Geoserver asks for publishing the layer. >>>>>>>>>>>>>>>>>>>>>>>> I have followed the following command lines to >>>>>>>>>>>>>>>>>>>>>>>> introduce the data to database which I will appreciate if you can tell me >>>>>>>>>>>>>>>>>>>>>>>> if they are correct. And also, I would like to know how can I publish the >>>>>>>>>>>>>>>>>>>>>>>> layer because the link that you send me doesn't give me enough information >>>>>>>>>>>>>>>>>>>>>>>> to be able for that. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> ============================================================================================================== >>>>>>>>>>>>>>>>>>>>>>>> ===== Download the XYZ data as *.asc file ===== >>>>>>>>>>>>>>>>>>>>>>>> $ mkdir /root/data >>>>>>>>>>>>>>>>>>>>>>>> $ cd /root/data >>>>>>>>>>>>>>>>>>>>>>>> $ wget >>>>>>>>>>>>>>>>>>>>>>>> ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT/H0037/mdt_037_1_8.zip >>>>>>>>>>>>>>>>>>>>>>>> $ unzip mdt_037_1_8.zip >>>>>>>>>>>>>>>>>>>>>>>> $ gdal_polygonize.py -f "ESRI Shapefile" >>>>>>>>>>>>>>>>>>>>>>>> mdt_037_1_8.asc mdt_037_1_8.shp >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> ===== Create database on Postgre as postgres user >>>>>>>>>>>>>>>>>>>>>>>> ===== >>>>>>>>>>>>>>>>>>>>>>>> $ su - postgres >>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres -d postgres >>>>>>>>>>>>>>>>>>>>>>>> $ create database [yourdatabase]; >>>>>>>>>>>>>>>>>>>>>>>> -> CREATE DATABASE >>>>>>>>>>>>>>>>>>>>>>>> $ \list >>>>>>>>>>>>>>>>>>>>>>>> $ \q >>>>>>>>>>>>>>>>>>>>>>>> $ psql -d [yourdatabase] -c "CREATE EXTENSION >>>>>>>>>>>>>>>>>>>>>>>> postgis;" >>>>>>>>>>>>>>>>>>>>>>>> -> CREATE EXTENSION >>>>>>>>>>>>>>>>>>>>>>>> $ exit >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> ===== Define Postgre password ===== >>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres >>>>>>>>>>>>>>>>>>>>>>>> $ \password postgres >>>>>>>>>>>>>>>>>>>>>>>> $ \q >>>>>>>>>>>>>>>>>>>>>>>> $ exit >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> ===== Import data with "shp2pgsql" utility of >>>>>>>>>>>>>>>>>>>>>>>> postgis ( >>>>>>>>>>>>>>>>>>>>>>>> http://www.bostongis.com/pgsql2shp_shp2pgsql_quickguide.bqg) >>>>>>>>>>>>>>>>>>>>>>>> ===== >>>>>>>>>>>>>>>>>>>>>>>> $ /root/postgis-2.1.0/loader/shp2pgsql >>>>>>>>>>>>>>>>>>>>>>>> /root/data/mdt_037_1_8.shp >sql >>>>>>>>>>>>>>>>>>>>>>>> -> Shapefile type: Polygon >>>>>>>>>>>>>>>>>>>>>>>> -> Postgis type: MULTIPOLYGON[2] >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> ===== Import created sql to postgre ===== >>>>>>>>>>>>>>>>>>>>>>>> $ mv sql /var/lib/postgresql/ >>>>>>>>>>>>>>>>>>>>>>>> $ chmod 777 /var/lib/postgresql/sql >>>>>>>>>>>>>>>>>>>>>>>> $ su - postgres >>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres -d [yourdatabase] -f sql >>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres -d [yourdatabase] -c "\d" >>>>>>>>>>>>>>>>>>>>>>>> -> List of relations >>>>>>>>>>>>>>>>>>>>>>>> -> Schema | Name | Type | >>>>>>>>>>>>>>>>>>>>>>>> Owner >>>>>>>>>>>>>>>>>>>>>>>> -> >>>>>>>>>>>>>>>>>>>>>>>> --------+---------------------+----------+---------- >>>>>>>>>>>>>>>>>>>>>>>> -> public | geography_columns | view | >>>>>>>>>>>>>>>>>>>>>>>> postgres >>>>>>>>>>>>>>>>>>>>>>>> -> public | geometry_columns | view | >>>>>>>>>>>>>>>>>>>>>>>> postgres >>>>>>>>>>>>>>>>>>>>>>>> -> public | mdt_037_1_8 | table | >>>>>>>>>>>>>>>>>>>>>>>> postgres >>>>>>>>>>>>>>>>>>>>>>>> -> public | mdt_037_1_8_gid_seq | sequence | >>>>>>>>>>>>>>>>>>>>>>>> postgres >>>>>>>>>>>>>>>>>>>>>>>> -> ... >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> $ exit >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> ===== Add new workspace ===== >>>>>>>>>>>>>>>>>>>>>>>> + Name: Fiware >>>>>>>>>>>>>>>>>>>>>>>> + URI of name space: com.fiware >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> ===== Add new "Data store" on Geoserver ( >>>>>>>>>>>>>>>>>>>>>>>> http://151.80.143.120:8080/geoserver) ===== >>>>>>>>>>>>>>>>>>>>>>>> + Select the "PostGIS - PostGIS Database" vectorial >>>>>>>>>>>>>>>>>>>>>>>> data >>>>>>>>>>>>>>>>>>>>>>>> + Add data required: >>>>>>>>>>>>>>>>>>>>>>>> + Workspace: Fiware >>>>>>>>>>>>>>>>>>>>>>>> + Name of origin data: Fiware_Test1 >>>>>>>>>>>>>>>>>>>>>>>> + database: fiwaretest1 >>>>>>>>>>>>>>>>>>>>>>>> + host: localhost >>>>>>>>>>>>>>>>>>>>>>>> + port: 5432 >>>>>>>>>>>>>>>>>>>>>>>> + user: postgres >>>>>>>>>>>>>>>>>>>>>>>> + pass: postgres >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> ===== Add new layer and make public ===== >>>>>>>>>>>>>>>>>>>>>>>> + Edit layer features??? >>>>>>>>>>>>>>>>>>>>>>>> + SRS? >>>>>>>>>>>>>>>>>>>>>>>> + ... >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> ============================================================================================================== >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> 2015-03-03 13:42 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Yes, write all polygons to a single shp file or to >>>>>>>>>>>>>>>>>>>>>>>>> a single table inside a database and you are good to go. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> I would recommend that you also study some basics >>>>>>>>>>>>>>>>>>>>>>>>> about rendering engines and search general knowledge what data 3D models >>>>>>>>>>>>>>>>>>>>>>>>> really keeps inside them. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> In FIWARE we use XML3D as a rendering engine and >>>>>>>>>>>>>>>>>>>>>>>>> all 3D models produced by GeoServer are in XML3D format. >>>>>>>>>>>>>>>>>>>>>>>>> Here is one guide how to use XML3D rendering >>>>>>>>>>>>>>>>>>>>>>>>> engine: >>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/xml3d/xml3d.js/wiki/The-Basics-of-XML3D >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Mar 3, 2015 at 2:53 PM, Ibon Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for your clarifications. >>>>>>>>>>>>>>>>>>>>>>>>>> I have some doubts about your comments. >>>>>>>>>>>>>>>>>>>>>>>>>> I understand how do I have to create the >>>>>>>>>>>>>>>>>>>>>>>>>> polygons. I have done a python script with the for loops as you said >>>>>>>>>>>>>>>>>>>>>>>>>> (attached) which creates the POLIGONZs. >>>>>>>>>>>>>>>>>>>>>>>>>> I have done a SHP file for each polygon, but >>>>>>>>>>>>>>>>>>>>>>>>>> should I do a single SHP with all the polygons? I suppose that I should do >>>>>>>>>>>>>>>>>>>>>>>>>> a single SHP because I can have many polygons if the resolution is too >>>>>>>>>>>>>>>>>>>>>>>>>> high. Or this is not possible? >>>>>>>>>>>>>>>>>>>>>>>>>> The procedure of writting data to database with psycopg2 >>>>>>>>>>>>>>>>>>>>>>>>>> is similar, so the same question, all polygons together is it possible? >>>>>>>>>>>>>>>>>>>>>>>>>> Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-03 11:35 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> I have just updated User and Programmers guide. >>>>>>>>>>>>>>>>>>>>>>>>>>> I hope that these tips helps you forward. >>>>>>>>>>>>>>>>>>>>>>>>>>> Added content: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Data generation from *.xyz file format >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Here is a small sample from source dataset: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Easting Northing Elevation >>>>>>>>>>>>>>>>>>>>>>>>>>> --------------------------------- >>>>>>>>>>>>>>>>>>>>>>>>>>> 398000.000 7542000.000 279.950 >>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7542000.000 279.388 >>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7542000.000 278.818 >>>>>>>>>>>>>>>>>>>>>>>>>>> 398000.000 7541990.000 281.002 >>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541990.000 280.436 >>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7541990.000 279.847 >>>>>>>>>>>>>>>>>>>>>>>>>>> 398000.000 7541980.000 282.096 >>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541980.000 281.539 >>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7541980.000 280.944 >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> That data produces following 2D grid: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> 1 2 >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| >>>>>>>>>>>>>>>>>>>>>>>>>>> 0 | 398000.000 7542000.000 279.950 | >>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7542000.000 279.388 | 398020.000 7542000.000 278.818 | >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| >>>>>>>>>>>>>>>>>>>>>>>>>>> 1 | 398000.000 7541990.000 281.002 | >>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541990.000 280.436 | 398020.000 7541990.000 279.847 | >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| >>>>>>>>>>>>>>>>>>>>>>>>>>> 2 | 398000.000 7541980.000 282.096 | >>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541980.000 281.539 | 398020.000 7541980.000 280.944 | >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> From that grid we can create polygons >>>>>>>>>>>>>>>>>>>>>>>>>>> representing terrain surface. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> WKT polygons generated from that dataset should >>>>>>>>>>>>>>>>>>>>>>>>>>> look like this: >>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398000.000 7542000.000 279.950, >>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7542000.000 279.388, 398010.000 7541990.000 280.436, 398000.000 >>>>>>>>>>>>>>>>>>>>>>>>>>> 7541990.000 281.002, 398000.000 7542000.000 279.950)) >>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398010.000 7542000.000 279.388, >>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7542000.000 278.818, 398020.000 7541990.000 279.847, 398010.000 >>>>>>>>>>>>>>>>>>>>>>>>>>> 7541990.000 280.436, 398010.000 7542000.000 279.388)) >>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398000.000 7541990.000 281.002, >>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541990.000 280.436, 398010.000 7541980.000 281.539, 398000.000 >>>>>>>>>>>>>>>>>>>>>>>>>>> 7541980.000 282.096, 398000.000 7541990.000 281.002)) >>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398010.000 7541990.000 280.436, >>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7541990.000 279.847, 398020.000 7541980.000 280.944, 398010.000 >>>>>>>>>>>>>>>>>>>>>>>>>>> 7541980.000 281.539, 398010.000 7541990.000 280.436)) >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> NOTE: It is said in WKT specification that >>>>>>>>>>>>>>>>>>>>>>>>>>> polygons needs to be closed, meaning that start and end points are the same. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Each polygon should be written into a PostGIS >>>>>>>>>>>>>>>>>>>>>>>>>>> database or into a shape file. >>>>>>>>>>>>>>>>>>>>>>>>>>> - Shapefile writing can be done for example with >>>>>>>>>>>>>>>>>>>>>>>>>>> python library called pyshp ( >>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/GeospatialPython/pyshp). >>>>>>>>>>>>>>>>>>>>>>>>>>> - PostGIS can be used for example with psycopg2 >>>>>>>>>>>>>>>>>>>>>>>>>>> library (http://initd.org/psycopg/). >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Depending on selected storage format choose >>>>>>>>>>>>>>>>>>>>>>>>>>> corresponding publishing steps for data publishing into a W3DS layer with >>>>>>>>>>>>>>>>>>>>>>>>>>> GeoServer. >>>>>>>>>>>>>>>>>>>>>>>>>>> Official GeoServer guide how to publish a >>>>>>>>>>>>>>>>>>>>>>>>>>> shapefile: >>>>>>>>>>>>>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/stable/en/user/gettingstarted/shapefile-quickstart/index.html >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Official GeoServer guide how to publish a >>>>>>>>>>>>>>>>>>>>>>>>>>> PostGIS table: >>>>>>>>>>>>>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/stable/en/user/gettingstarted/postgis-quickstart/index.html >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Adding texture >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Raster data (f.ex. ortophotos) is used as >>>>>>>>>>>>>>>>>>>>>>>>>>> terrain texture and guide how to work with rasters can be found from here: >>>>>>>>>>>>>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/stable/en/user/data/raster/index.html >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Mar 2, 2015 at 6:23 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for the steps. However, I would like >>>>>>>>>>>>>>>>>>>>>>>>>>>> to clarify some things to have clear what I should do. >>>>>>>>>>>>>>>>>>>>>>>>>>>> Imagine I have the data: >>>>>>>>>>>>>>>>>>>>>>>>>>>> lat lon alt >>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 0 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 1 5 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 2 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 0 5 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 1 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 2 15 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 0 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 1 15 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 2 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>> This is like a flat surface. So I have to >>>>>>>>>>>>>>>>>>>>>>>>>>>> create a 2D array like: >>>>>>>>>>>>>>>>>>>>>>>>>>>> 10 15 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 5 10 15 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 5 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>> I have never create wkt polygons in 3D, but as >>>>>>>>>>>>>>>>>>>>>>>>>>>> I have seen in some websites, this could be done like this? >>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGON ((0 0 0, 0 1 5, 1 1 10, 1 0 5), (0 1 5, >>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 2 10, 1 1 10, 1 2 15), (1 0 5, 2 0 10, 1 1 10, 2 1 15), (1 1 10, 1 2 15, >>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 1 15, 2 2 20)) >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> After this, I am not sure how to upload to DDBB >>>>>>>>>>>>>>>>>>>>>>>>>>>> in shp because I have many files. Also, I don't know how to associate the >>>>>>>>>>>>>>>>>>>>>>>>>>>> ortophoto to the shapes. >>>>>>>>>>>>>>>>>>>>>>>>>>>> Being honest, I am a little bit lost and I >>>>>>>>>>>>>>>>>>>>>>>>>>>> would appreciate if you can help me. >>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-02 7:38 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm sorry to hear that you still have those >>>>>>>>>>>>>>>>>>>>>>>>>>>>> problems. I'm looking into that and I will report back to you if I'm able >>>>>>>>>>>>>>>>>>>>>>>>>>>>> to reproduce and solve it in some environment. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> At the moment you can't use .tiff file format. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Since XML3D, which we use as a rendering >>>>>>>>>>>>>>>>>>>>>>>>>>>>> engine, requires that rendered models consist of polygons we had to create >>>>>>>>>>>>>>>>>>>>>>>>>>>>> polygonal terrain from .asc point grid. In order to reduce processor loads >>>>>>>>>>>>>>>>>>>>>>>>>>>>> we decided that data should be stored as polygons. In that way data can be >>>>>>>>>>>>>>>>>>>>>>>>>>>>> returned to a client without any further processing. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> We have developed proprietary importing tools >>>>>>>>>>>>>>>>>>>>>>>>>>>>> to support our business cases and therefore I can't provide those directly >>>>>>>>>>>>>>>>>>>>>>>>>>>>> to you but I can describe what we did. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Our workflow from .asc files included three >>>>>>>>>>>>>>>>>>>>>>>>>>>>> steps: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1. Read asc file and create 2D array from it >>>>>>>>>>>>>>>>>>>>>>>>>>>>> where each cell is a point from asc file >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2. Inside a for loop select four points from >>>>>>>>>>>>>>>>>>>>>>>>>>>>> array and create wkt polygon from those points >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 3. Write just created polygon to a database or >>>>>>>>>>>>>>>>>>>>>>>>>>>>> to a shp file >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> When polygons are stored in a database you >>>>>>>>>>>>>>>>>>>>>>>>>>>>> need to publish that table in GeoServer as a layer and configure it to use >>>>>>>>>>>>>>>>>>>>>>>>>>>>> W3DS module. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> I hope that this clarifies needed steps from >>>>>>>>>>>>>>>>>>>>>>>>>>>>> source data to a production use. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Fri, Feb 27, 2015 at 8:04 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I continue trying to find my problem but I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> haven't advance :( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anyway, I don't write for that. I am trying >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to upload xyz format data and some ortophotos to display them with W3DS. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have the data in *.asc files and I have a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> TIF file with all of them merged. As the documentation ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> says that the *.shp, .dbf* and *.shx* files >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> are mandatory, I should convert all *.asc* >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to these formats? I cannot use* .tif*? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> As the documentation syas, I have to upload >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> this files to the server and I suppose that the ortophotos also. However, I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> don't know how to display them afterwards. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Can you explain me? I am in a Fiware European >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> project and as you are the support of Fiware I hope you can help me. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Best regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-24 11:58 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have no glue why it's not loading since >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> personally I haven't ever used that module. You should read GeoServer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> startup logs and check if there are some fatal errors in service loading. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Logs should have something similar lines to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> these: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'wfs', enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'wms', enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'wcs', enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'w3ds', enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Check errors near those. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> There is also GeoServer users mail list and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you probably could get more helpful response from there, since I'm not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> expert in that area. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Feb 24, 2015 at 1:13 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for the comments. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> About the "Importer extension" I downloaded >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the core extension for version 2.6.0 as you said because I show that was >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the version when I install it. So, can you guess the reason of the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> extension for not working. As you explained, W3DS is an isolated module, so >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> it has no sense for not working. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-24 11:08 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Changes delivered to FIWARE are isolated >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> only to W3DS module and those are written on top of the GeoServer version >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2.6.0. Therefore you need to use extensions written for that specific >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> version. We will move to next stable version 2.7 when it is released later >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> this spring. Currently 2.7 release is in RC1 state. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Our changes are also in the official >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> GeoServer master and 2.7 branches and you could actually try to build >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> either of those and see if build problem still exists. Meanwhile I try to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> replicate your problem in a virtual machine since everything worked well in >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> every physical machines I have access to. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Feb 24, 2015 at 11:13 AM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I continue having a failure message in >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the same test. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have continued looking to the builded >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> version (without tests as I said) and I was trying to use the "Importer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> extension" installed by copying some source from this link: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/latest/en/user/extensions/importer/installing.html >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I copied the files to the folder >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ".../geoserver/src/web/app/target/geoserver/WEB-INF/lib" as it says and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> restart Geoserver, but the extension does not seems to load. Could be due >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to the Geoserver version done for fiware? Or, how could I solve the problem? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-23 11:55 GMT+00:00 Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> : >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Only difference between our work chains >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that I was able to find is that I use also clean statement in mvn build >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> command. Could you try that? If it's still not working I try to find some >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> time to reproduce problem in a clean machine. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> mvn clean install -DdownloadSources=true >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -DskipTests=false -Pw3ds >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Resulting following summary: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Reactor Summary: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................................. SUCCESS [2.088s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Core Platform Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .................................. SUCCESS [9.062s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Open Web Service Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [5.411s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Main Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................... SUCCESS [1:58.712s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Security Modules >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................ SUCCESS [0.043s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer JDBC Security Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................ SUCCESS [18.349s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer LDAP Security Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................ SUCCESS [35.825s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................... SUCCESS [1.450s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service 1.0 Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....................... SUCCESS [18.896s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service 1.1 Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....................... SUCCESS [19.249s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service 2.0 Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....................... SUCCESS [46.273s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Feature Service Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................ SUCCESS [1:21.581s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Map Service Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................ SUCCESS [1:27.636s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] KML support for GeoServer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................. SUCCESS [24.646s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoWebCache (GWC) Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .............................. SUCCESS [55.551s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] REST Support Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................... SUCCESS [10.524s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] REST Configuration Service Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ..................... SUCCESS [54.318s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Web Modules >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................. SUCCESS [0.028s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Core UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................ SUCCESS [46.005s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] WMS UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [17.764s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GWC UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [23.123s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] WFS UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [10.234s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Demoes Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [16.390s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] WCS UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [12.849s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI Modules >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................... SUCCESS [0.037s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI Core Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [1:14.168s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI JDBC Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [50.839s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI LDAP Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [27.079s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] REST UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................ SUCCESS [10.953s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Community Space >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....................................... SUCCESS [0.027s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web 3D Service >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................ SUCCESS [4.663s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Web Application >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................. SUCCESS [3.207s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Extensions >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .................................. SUCCESS [0.083s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] BUILD SUCCESSFUL >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Total time: 14 minutes 49 seconds >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Finished at: Mon Feb 23 13:26:42 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> EET 2015 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Final Memory: 187M/1400M >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Feb 23, 2015 at 12:33 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I followed the installation guide of >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Fiware for installation. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I used a Ubuntu 14.04 Server 64 bits >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with 4 cores, 8GB RAM and 100GB of HD. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The version of JDK (openjdk-7-jdk) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> is 7u51-2.4.6-1ubuntu4, and postgis 2.1.0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The source that I downloaded is the one >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you shared from git (git clone -b fiware >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver.git >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I followed all the commands so that's >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the reason from asking. I would appreciate if you can tell me what can be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> different. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-20 13:03 GMT+00:00 Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> without knowledge about your build >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> system (used java version, used operating system etc.) and where you >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> downloaded sources I'm not able to help you with this problem. I just >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> tested version which we have delivered to FIWARE ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver/tree/fiware) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and at least it build without any errors in any test cases. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Also, CatalogBuilder is bit out of my >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> knowledge scope. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Fri, Feb 20, 2015 at 1:18 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Sorry, I forget to attach the log. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-20 11:17 GMT+00:00 Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia : >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have one comment about the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> installation. Previously when I installed the geoserver I didn't notice >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> because I was building without tests. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> But I was building geoserver with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> test where I found a failure on: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> testSingleBandedCoverage(org.geoserver.catalog.impl.CatalogBuilderTest) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I attached the log of the output for >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your information. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> How can I solve this problem? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-05 7:48 GMT+00:00 Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> : >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for the reply. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have a xyz format data also so I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> will try to test what you sent me and look for the Unit Testing Plan link >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you sent. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If I have any doubt or problem I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> will come back to you. Thank you. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-05 7:27 GMT+01:00 Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Data publishing is well documented >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> in GeoServer user manual: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/2.5.x/en/user/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Data which we used in our >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> development was from National >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Land Survey of Finland. Source >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> data was in *-xyz*-format, which >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> contains elevation data with spatial information. With this source >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> information it is possible to generate shapefile consisting polygon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> structure with elevation data. 2D presentation of the converted shapefile >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with elevation points is flat grid, in 3D presentation each grid points are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> in same elevation level as in the real world. Therefore this grid with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> elevation data can be used as source for terrain presentation. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You can also read user guide from: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You can find guide for setting up >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> test setup from here: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ---------- Forwarded message >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ---------- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> From: Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Date: Wed, Feb 4, 2015 at 12:35 AM >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Subject: W3DS - FIWARE >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> To: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> miika.santala at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Dear Miika, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I am Ibon from Spain. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I write to you because I am >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> involved in the FIWARE European project. This project promote a GIS data >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> provider with the W3DS for 3D visualization as the one you show on the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> following link: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://130.206.81.238:8080/gis_test_client/index.xhtml >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I contact you because a have been >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> in contact with Jorge Gustavo, who made a similar use of W3DS >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.sigte.udg.edu/jornadassiglibre2012/uploads/presentaciones_12/p43.pdf) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and he told me that W3DS is now supported by you. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have followed the instructions >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of FIWARE wiki ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Installation_and_Administration_Guide) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to start using the service and everything seems to work perfectly with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Jetty. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> However, I would like to know how >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have to store GIS data with 3D >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> information straight to GeoServer. Is there any documentation of how to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> upload this kind of information? Can you share with me any documentation >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> about it? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Yours >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sincerely, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> material are confidential and may contain legally privileged information. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you are not the intended recipient, please contact the sender and delete >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the e-mail from your system without producing, distributing or retaining >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> copies thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> are confidential and may contain legally privileged information. If you are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> are confidential and may contain legally privileged information. If you are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are confidential >>>>>>>>>>>>>>>>>>>> and may contain legally privileged information. If you are not the intended >>>>>>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> This e-mail and all attached material are confidential >>>>>>>>>>>>>>>>>> and may contain legally privileged information. If you are not the intended >>>>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> This e-mail and all attached material are confidential and >>>>>>>>>>>>>>>> may contain legally privileged information. If you are not the intended >>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> This e-mail and all attached material are confidential and >>>>>>>>>>>>>>> may contain legally privileged information. If you are not the intended >>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof. >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>> >>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>> >>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>> >>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>> >>>>>>>>>>>>>> This e-mail and all attached material are confidential and >>>>>>>>>>>>>> may contain legally privileged information. If you are not the intended >>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>>>>>>>>> without producing, distributing or retaining copies thereof. >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>> >>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>> >>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>> >>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>> >>>>>>>>>>>>> This e-mail and all attached material are confidential and may >>>>>>>>>>>>> contain legally privileged information. If you are not the intended >>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>>>>>>>> without producing, distributing or retaining copies thereof. >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> Juha Hyv?rinen >>>>>>>>>> Software Engineer >>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>> >>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>> >>>>>>>>>> See our new press release: >>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>> >>>>>>>>>> www.cyberlightning.com >>>>>>>>>> >>>>>>>>>> This e-mail and all attached material are confidential and may >>>>>>>>>> contain legally privileged information. If you are not the intended >>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>>>>> without producing, distributing or retaining copies thereof. >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> Juha Hyv?rinen >>>>>>>> Software Engineer >>>>>>>> Cyberlightning Ltd. >>>>>>>> >>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>> >>>>>>>> See our new press release: >>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>> >>>>>>>> www.cyberlightning.com >>>>>>>> >>>>>>>> This e-mail and all attached material are confidential and may >>>>>>>> contain legally privileged information. If you are not the intended >>>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>>> without producing, distributing or retaining copies thereof. >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Sami Jylkk? >>>>>>> Cyberlightning Ltd. >>>>>>> >>>>>>> www.cyberlightning.com >>>>>>> >>>>>>> Skype: sami_jylkka >>>>>>> >>>>>>> This e-mail and all attached material are confidential and may >>>>>>> contain legally privileged information. If you are not the intended >>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>> without producing, distributing or retaining copies thereof. >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> -- >>>>> Sami Jylkk? >>>>> Cyberlightning Ltd. >>>>> >>>>> www.cyberlightning.com >>>>> >>>>> Skype: sami_jylkka >>>>> >>>>> This e-mail and all attached material are confidential and may contain >>>>> legally privileged information. If you are not the intended recipient, >>>>> please contact the sender and delete the e-mail from your system without >>>>> producing, distributing or retaining copies thereof. >>>>> >>>> >>>> >>> >>> >>> -- >>> Sami Jylkk? >>> Cyberlightning Ltd. >>> >>> www.cyberlightning.com >>> >>> Skype: sami_jylkka >>> >>> This e-mail and all attached material are confidential and may contain >>> legally privileged information. If you are not the intended recipient, >>> please contact the sender and delete the e-mail from your system without >>> producing, distributing or retaining copies thereof. >>> >> >> > > > -- > Sami Jylkk? > Cyberlightning Ltd. > > www.cyberlightning.com > > Skype: sami_jylkka > > This e-mail and all attached material are confidential and may contain > legally privileged information. If you are not the intended recipient, > please contact the sender and delete the e-mail from your system without > producing, distributing or retaining copies thereof. > -------------- next part -------------- An HTML attachment was scrubbed... URL: From pvitale at eng.it Mon Jul 6 09:24:39 2015 From: pvitale at eng.it (Pasquale Vitale) Date: Mon, 06 Jul 2015 09:24:39 +0200 Subject: [Fiware-finodex-coaching] Error creating router in my FiLab account. In-Reply-To: References: Message-ID: <559A2D37.2000900@eng.it> Dear Jaime, you could send a mail to fiware-lab-help at lists.fi-ware.org including your ID and your problems. Please put me in cc. Thank you and regards, Pasquale Il 01/07/2015 12:00, Jaime Loureiro ha scritto: > Dear finodex coaching, > > I have two problems in my filab account (Lannion 2 node): > > Firstly, it is not possible to create a router. When I try to create > it, I get the following error: > > > /Error creating router SmartHospitalRouter. Cause: 409 Error/ > > /{"NeutronError": {"message": "Quota exceeded for resources: > ['router']", "type": "OverQuota", "detail": ""}} / > > It is important because I need to deploy several services in different > VMs and I only have 1 public IP. I need port forwarding and I guess > deploying a router is necessary. > > Other issue is I don't be able to create a new network. Once I fill > the network name, subnet name, dns, network address parameters I push > create button and it doesn't run. > > I sent this issues to communityaccount at fiware.org > two days ago but I have not > obtained answer yet. > > Thanks for your attention > > Best > > JAIME LOUREIRO ACU?A Infinbox > *jaime at infinbox.com * > T (+34) 605 530 981 T (+34) 605 530 981 > *contact at infinbox.com *| > *www.infinbox.com * > > [IMPORTANTE] La informaci?n que pudiera contener este comunicado, > relacionada con datos de car?cter personal, se encuentra amparada en > la Ley Org?nica de Protecci?n de Datos 15/99, que compromete a no > utilizar estos datos para fines que no sean los estrictamente > necesarios para la realizaci?n de su cometido, a?adiendo adem?s la > absoluta confidencialidad y exclusividad, quedando prohibida a > cualquier persona su revelaci?n, copia, distribuci?n o el ejercicio de > cualquier acci?n relativa a su contenido. Si recibe este correo > electr?nico err?neamente, ruego lo elimine de todos sus archivos. > > Los datos de car?cter personal se incluir?n en los ficheros creados > por Infinbox S.L.. La finalidad de estos ficheros es optimizar las > relaciones administrativas y comerciales. Los datos personales > recogidos se utilizar?n para dichas finalidades y el afectado podr? > acceder a sus datos personales, rectificarlos o cancelarlos > contactando con Infinbox S.L. Crta Marcosende-Charruadas, num 11, > Vigo, como responsable del fichero.[#] > > > > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching -------------- next part -------------- An HTML attachment was scrubbed... URL: From jaime at infinbox.com Mon Jul 6 10:11:10 2015 From: jaime at infinbox.com (Jaime Loureiro) Date: Mon, 6 Jul 2015 10:11:10 +0200 Subject: [Fiware-finodex-coaching] Smart Hospital Fi-Lab ID Message-ID: Dear finodex coaching team, >From FIWARE LAB Upgrade Account you have asked me my ID. I guess what you refer is about my account id, so, it is jaime at infinbox.com Best regards JAIME LOUREIRO ACU?A[image: Infinbox] *jaime at infinbox.com * T (+34) 605 530 981T (+34) 605 530 981 *contact at infinbox.com *| *www.infinbox.com * [IMPORTANTE] La informaci?n que pudiera contener este comunicado, relacionada con datos de car?cter personal, se encuentra amparada en la Ley Org?nica de Protecci?n de Datos 15/99, que compromete a no utilizar estos datos para fines que no sean los estrictamente necesarios para la realizaci?n de su cometido, a?adiendo adem?s la absoluta confidencialidad y exclusividad, quedando prohibida a cualquier persona su revelaci?n, copia, distribuci?n o el ejercicio de cualquier acci?n relativa a su contenido. Si recibe este correo electr?nico err?neamente, ruego lo elimine de todos sus archivos. Los datos de car?cter personal se incluir?n en los ficheros creados por Infinbox S.L.. La finalidad de estos ficheros es optimizar las relaciones administrativas y comerciales. Los datos personales recogidos se utilizar?n para dichas finalidades y el afectado podr? acceder a sus datos personales, rectificarlos o cancelarlos contactando con Infinbox S.L. Crta Marcosende-Charruadas, num 11, Vigo, como responsable del fichero.[#] -------------- next part -------------- An HTML attachment was scrubbed... URL: From pvitale at eng.it Mon Jul 6 10:19:05 2015 From: pvitale at eng.it (Pasquale Vitale) Date: Mon, 06 Jul 2015 10:19:05 +0200 Subject: [Fiware-finodex-coaching] Problems with PEP Proxy and Orion Context Broker In-Reply-To: References: Message-ID: <559A39F9.40101@eng.it> Hi all, Carlos has this problem in this project. could you suggest some things? Thank you in advance, Pasquale Il 01/07/2015 10:25, Carlos Corrales ha scritto: > Hi Finodex Fiware team, > > We meet last week in Trento, and I told you some issues we had while > implementing PEP Proxy + Orion Context Broker. > The main problem we are having was that we want to subscribe an user > to changes in a sensor value that is stored in Orion. To secure the > access, we included a security module composed by PEP Proxy (Wilma), > IdM (Keyrock) and Authorization PDP (AuthZForce). We are able to query > context and receive the value in the user side, but we are not able to > make the changes get to the users when they are not requesting them > directly. > In Orion Context Broker, there is an option to subscribe to different > events. We are able to subscribe the user but, when there is a change > and Orion tries to notify the user, this notification dies in the PEP > Proxy. We tried contacting Alvaro Alonso (aalonsog at dit.upm.es > ), which is the Wilma PEP Proxy developer, > and he told us that PEP Proxy is only able to create connections in > one direction, meaning that if the user starts the communication, the > answers will be able to get the user, but it is not possible to do it > in case the one that starts the communication is Orion. We are > thinking about sending queries periodically to Orion to check if there > was any alert, but we are not sure if you have any suggestion for us, > because we are a little bit lost here. > > Best regards > -- > Carlos Corrales > Cofounder Secmotic Innovation S.L. > http://www.secmotic.com > > > > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching -------------- next part -------------- An HTML attachment was scrubbed... URL: From pvitale at eng.it Mon Jul 6 10:26:56 2015 From: pvitale at eng.it (Pasquale Vitale) Date: Mon, 06 Jul 2015 10:26:56 +0200 Subject: [Fiware-finodex-coaching] Problem with authentication In-Reply-To: References: Message-ID: <559A3BD0.9010703@eng.it> Hi Miguel, please send your request to Joaqu?n Salvach?a or ?lvaro Alonso at this emails: - jsalvachua at dit.upm.es - aalonsog at dit.upm.es Regards, Pasquale Il 29/06/2015 20:05, MAPT Talkykar ha scritto: > Hello > > We are having troubles with IdM. Example explained in this page doesnt > work: > https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/Publish/Subscribe_Broker_-_Orion_Context_Broker_-_Quick_Start_for_Programmers > > I use script to get auth token, but when i try to do the curl to get > data from context broker, it prints: "User token not authorized" > > I see if $TOKEN variable is void, but it has the value showed by the > script ( > > Token: v1b64sDg2Qc6NXiyovrAjdfCNlZf4i ) > > > Thanks for your support > > > -- > > > > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching -------------- next part -------------- An HTML attachment was scrubbed... URL: From pvitale at eng.it Mon Jul 6 10:38:24 2015 From: pvitale at eng.it (Pasquale Vitale) Date: Mon, 06 Jul 2015 10:38:24 +0200 Subject: [Fiware-finodex-coaching] Smart Hospital Fi-Lab ID In-Reply-To: References: Message-ID: <559A3E80.6000007@eng.it> Dear Jaime, your account in the FIWARE Lab is active for jaime at infinbox.com account. For any questions about the Lab, please send a mail to fiware-lab-help at lists.fi-ware.org including your ID. Best regards, Pasquale Il 06/07/2015 10:11, Jaime Loureiro ha scritto: > Dear finodex coaching team, > > From FIWARE LAB Upgrade Account you have asked me my ID. I guess what > you refer is about my account id, so, it is jaime at infinbox.com > > > Best regards > > JAIME LOUREIRO ACU?A Infinbox > *jaime at infinbox.com * > T (+34) 605 530 981 T (+34) 605 530 981 > *contact at infinbox.com *| > *www.infinbox.com * > > [IMPORTANTE] La informaci?n que pudiera contener este comunicado, > relacionada con datos de car?cter personal, se encuentra amparada en > la Ley Org?nica de Protecci?n de Datos 15/99, que compromete a no > utilizar estos datos para fines que no sean los estrictamente > necesarios para la realizaci?n de su cometido, a?adiendo adem?s la > absoluta confidencialidad y exclusividad, quedando prohibida a > cualquier persona su revelaci?n, copia, distribuci?n o el ejercicio de > cualquier acci?n relativa a su contenido. Si recibe este correo > electr?nico err?neamente, ruego lo elimine de todos sus archivos. > > Los datos de car?cter personal se incluir?n en los ficheros creados > por Infinbox S.L.. La finalidad de estos ficheros es optimizar las > relaciones administrativas y comerciales. Los datos personales > recogidos se utilizar?n para dichas finalidades y el afectado podr? > acceder a sus datos personales, rectificarlos o cancelarlos > contactando con Infinbox S.L. Crta Marcosende-Charruadas, num 11, > Vigo, como responsable del fichero.[#] > > > > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching -------------- next part -------------- An HTML attachment was scrubbed... URL: From pvitale at eng.it Mon Jul 6 10:53:12 2015 From: pvitale at eng.it (Pasquale Vitale) Date: Mon, 06 Jul 2015 10:53:12 +0200 Subject: [Fiware-finodex-coaching] CEP problem In-Reply-To: References: Message-ID: <559A41F8.9000400@eng.it> Hi Miguel try to send your request to "Tali Yatzkar Haham" at this email: TALI at il.ibm.com Please put me in CC. Thank you and regards, Pasquale Il 01/07/2015 12:32, MAPT Talkykar ha scritto: > We are having troubles while running IBM CEP. We have deployed it in > our server. When an event occurs, we dont obtain any output event or > file and we get this in catalina log: > > > may 20, 2015 8:53:52 AM > com.ibm.hrl.proton.admin.webapp.resources.DefinitionsResource > getAllDefinitions > INFORMACI?N: starting getAllDefinitions > may 20, 2015 8:53:52 AM > com.ibm.hrl.proton.admin.webapp.resources.DefinitionsResource > getAllDefinitions > INFORMACI?N: finished getAllDefinitions > may 20, 2015 8:54:22 AM > com.ibm.hrl.proton.admin.webapp.resources.DefinitionsResource > getAllDefinitions > INFORMACI?N: starting getAllDefinitions > may 20, 2015 8:54:22 AM > com.ibm.hrl.proton.admin.webapp.resources.DefinitionsResource > getAllDefinitions > INFORMACI?N: finished getAllDefinitions > may 20, 2015 9:22:17 AM > com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource > updateInstanceState > INFORMACI?N: starting updateInstanceState > may 20, 2015 9:22:17 AM > com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource > updateInstanceState > INFORMACI?N: perfoming action: change definitions... > may 20, 2015 9:22:17 AM > com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource > performServiceCall > INFORMACI?N: performing request: > http://localhost:8080/manager/text/stop?path=/ProtonOnWebServer > may 20, 2015 9:22:17 AM > com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource > updateInstanceState > INFORMACI?N: properties file > path:/usr/local/tomcat7/webapps/ProtonOnWebServer/Proton.properties > may 20, 2015 9:22:17 AM > com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource > updateInstanceState > INFORMACI?N: new definitions file path: /usr/local/CEP/set1.json > may 20, 2015 9:22:17 AM > com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource > performServiceCall > INFORMACI?N: performing request: > http://localhost:8080/manager/text/start?path=/ProtonOnWebServer > may 20, 2015 9:22:17 AM > com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource > updateInstanceState > INFORMACI?N: finished updateInstanceState > may 20, 2015 9:22:33 AM > com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource > updateInstanceState > INFORMACI?N: starting updateInstanceState > may 20, 2015 9:22:33 AM > com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource > updateInstanceState > INFORMACI?N: perfoming action: change state to stop > may 20, 2015 9:22:33 AM > com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource > performServiceCall > INFORMACI?N: performing request: > http://localhost:8080/manager/text/stop?path=/ProtonOnWebServer > may 20, 2015 9:22:33 AM > com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource > updateInstanceState > INFORMACI?N: finished updateInstanceState > may 20, 2015 9:22:45 AM > com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource > updateInstanceState > INFORMACI?N: starting updateInstanceState > may 20, 2015 9:22:45 AM > com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource > updateInstanceState > INFORMACI?N: perfoming action: change state to start > may 20, 2015 9:22:45 AM > com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource > performServiceCall > INFORMACI?N: performing request: > http://localhost:8080/manager/text/start?path=/ProtonOnWebServer > may 20, 2015 9:22:45 AM > com.ibm.hrl.proton.admin.webapp.resources.ProtonInstancesResource > updateInstanceState > INFORMACI?N: finished updateInstanceState > may 20, 2015 9:28:05 AM > com.ibm.hrl.proton.webapp.providers.EventJSONMessageReader readFrom > INFORMACI?N: started event message body reader > may 20, 2015 9:28:06 AM > com.ibm.hrl.proton.webapp.providers.EventJSONMessageReader readFrom > GRAVE: Could not parse json event > org.apache.wink.json4j.JSONException: The key [Name] was not in the > map, reason: The key [Name] was not in the map > may 20, 2015 9:38:52 AM > com.ibm.hrl.proton.webapp.providers.EventXmlNgsiMessageReader readFrom > INFORMACI?N: started event message body reader > may 20, 2015 9:38:52 AM > com.ibm.hrl.proton.webapp.providers.EventXmlNgsiMessageReader readFrom > INFORMACI?N: Event: TripContextUpdate > may 20, 2015 9:38:52 AM > com.ibm.hrl.proton.webapp.providers.EventXmlNgsiMessageReader readFrom > GRAVE: Could not parse XML NGSI event java.lang.NullPointerException, > reason: null > last attribute name: null last value: null > may 20, 2015 9:38:52 AM > com.ibm.hrl.proton.webapp.providers.EventXmlNgsiMessageReader readFrom > INFORMACI?N: finished event message body reader > may 20, 2015 9:38:52 AM > com.ibm.hrl.proton.webapp.resources.EventResource submitNewEvent > INFORMACI?N: starting submitNewEvent > may 20, 2015 9:38:52 AM > com.ibm.hrl.proton.webapp.resources.EventResource submitNewEvent > GRAVE: Could not send event, reason: java.lang.NullPointerException, > message: null > > > -- > > > > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching -------------- next part -------------- An HTML attachment was scrubbed... URL: From miguel at talkykar.com Mon Jul 13 11:53:27 2015 From: miguel at talkykar.com (MAPT Talkykar) Date: Mon, 13 Jul 2015 11:53:27 +0200 Subject: [Fiware-finodex-coaching] Problems with COSMOS Message-ID: We are having troubles with COSMOS. We have no permissions to do actions through SSH in our directory. For example: hadoop fs -cat /user/antonio.gonzalez/ Thanks in advance -- -------------- next part -------------- An HTML attachment was scrubbed... URL: From imaqueda at sensowave.com Mon Jul 13 12:04:53 2015 From: imaqueda at sensowave.com (Ignacio Maqueda) Date: Mon, 13 Jul 2015 12:04:53 +0200 Subject: [Fiware-finodex-coaching] Problems with COSMOS In-Reply-To: References: Message-ID: <55A38D45.3030704@sensowave.com> Hi, We agree with Miguel from Talkykar. We have trying to perform some basic operations with COSMOS following the tutorials but it does not work. Regards Ignacio Sensowave El 13/07/2015 a las 11:53, MAPT Talkykar escribi?: > We are having troubles with COSMOS. We have no permissions to do > actions through SSH in our directory. For example: > > hadoop fs -cat /user/antonio.gonzalez/ > > Thanks in advance > > -- > > > > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching -------------- next part -------------- An HTML attachment was scrubbed... URL: From ibon.salbi at gmail.com Mon Jul 13 13:10:20 2015 From: ibon.salbi at gmail.com (Ibon Salbidegoitia) Date: Mon, 13 Jul 2015 11:10:20 +0000 Subject: [Fiware-finodex-coaching] W3DS - FIWARE In-Reply-To: References: Message-ID: Hi Sami, I haven't received reply for the issue I told you in my previous email. Can you please confirm me that you received? If so, can you tell me the situation? Should I put Juha in Cc for all this process? Thank you in advance. Best regards, Ibon 2015-07-01 17:20 GMT+00:00 Ibon Salbidegoitia : > Hi Sami, > > First of all, as I mentioned in a previous email, I have put in Cc our > Fiware Accelerator (Finodex) coaches as they requested in a meeting with > them to follow the situation of each project that they are supporting. > > About your previous email, the last release is working! I have test it in > our test server (http://151.80.143.120/GIS_4.3.3/) and the DEM works with > the data provided as test. > I have checked that the test requires the textures to have "texture" on > their names and "DEM" for terrain DEM. I have upload my data to test it but > I have the following problems: > > 1. When I preview your DEM (DEM_geotiff_terrain_EPSG3067) I can see on > geoserver a grayscale image on openlayers (openlayers example > > ). > > I have seen that the tiff is a float32 image in grayscale with > a 281.604 minimum value and 792.834 maximum value . > > I have upload a similar DEM called "DEM_ODE_terrain" that it can be > selected from the DEM GIS Client example (on previous link). This image is > also float32 tiff with a minimum value of -3.40282e+38 and maximum > of 1545.84, where minimum value is a NoData value as it is shown with > gdalinfo command: NoData Value=-3.4028234663852886e+38 > The TIF image I use it can be found here: > ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip > The geodesic system of this TIF is ETRS89 that correponds to SRS > EPSG:25830. However the preview seems to be a 0-1 grayscale image as you > can see here > (takes > some seconds as it is big). This could be due to the NoData values > that make range so big not taking into account that the data does not > exist. This is correct? > > 2. The Terrain texture also has been uploaded to Geoserver as can be > seen here > > . > The DEM testing client gives the oportunity to select both layers > mentioned (for terrain DEM + terrain texture), however nothing appears, > only one small gray square looking upwards (on zenith) with the camera on > the client as the altitudes are higher than the ones from the examples. > > So everything from test seems to work correctly, but when I introduce my > data, the DEM test client does not seem to work. > Could it be due to NoData values? Anyway, why the ortophoto inserted is > shown as gray layer? > > Best regards, > Ibon > > > 2015-06-30 11:33 GMT+00:00 Sami J : > >> Hi Ibon, >> sorry about late response. We have now made new release from both server >> and example client, these can be found from the forge under *MIWI-GISDataProvider >> 4.3.3*-release: https://forge.fiware.org/frs/?group_id=7 >> source code has been uploaded also to the github. >> >> Short documentation related using DEM images can be found from: >> http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide#World_Wind_Format_Module >> >> Installation document covers how to upload DEM image to geoserver: >> http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Installation_and_Administration_Guide#GeoTIFF_based_.28DEM.29_data_sets_for_elevation >> >> >> Regarding using latitude/longitude coordinates, I don't know if you are >> using them or not. I just wanted to mention this if you haven't noticed >> this information from the GIS GE documentation :) To elaborate further, >> provided GIS GE example web client has been implemented so that it works >> correctly only with metric coordinate system. Using lat/long data source >> won't work with the provided client, and that's why lat/long coordinate >> handling needs to be implemented by yourself. But as said, I don't know if >> you are using data source based in latitude/longitudes or metric >> coordinates. >> >> >> Best regards, >> Sami >> >> On Thu, Jun 25, 2015 at 11:53 AM, Ibon Salbidegoitia < >> ibon.salbi at gmail.com> wrote: >> >>> Hi Sami, >>> >>> I have a couple of things to ask. >>> >>> 1. It is great that the grayscale images for elevation is pretty >>> much ready. Can you tell me when do you expect to finish the test and when >>> I can be able to test it? >>> 2. About the last paragraph, I do not understand why you tell me >>> that lat/long is not supported. Where I have used it? Do you refer to the >>> bounding box of the layers I have upload? So do I have to change the SRS to >>> EPSG:25830 for example instead of EPSG:4326? >>> >>> Best regards, >>> Ibon >>> >>> >>> 2015-06-24 14:22 GMT+00:00 Sami J : >>> >>>> Hi Ibon, >>>> ok now it's clear; in a short problem is that elevation data in >>>> grayscale image is not yet supported by the GIS GE. >>>> >>>> The good thing is that implementation for it is pretty much ready, we >>>> are doing final testing for it and then documentation will be updated. So >>>> soon it is possible to use grayscale elevation images as for source to >>>> elevation data, GIS GE implementation supports same data format as SRTM >>>> data uses. GIS GE will send response data in octet-stream format, client >>>> itself needs to create 3D objects based on the octet-stream data. >>>> >>>> please note that current version of the GIS GE reference web client >>>> only supports metric coordinates, Lat/log is not working. I mention this >>>> because if you'd like to use GIS data in Lat/Log format, the client >>>> scenemanager logic needs to be re-implemented. >>>> >>>> Best regards, >>>> Sami >>>> >>>> >>>> On Wed, Jun 24, 2015 at 10:10 AM, Ibon Salbidegoitia < >>>> ibon.salbi at gmail.com> wrote: >>>> >>>>> Hi Sami, >>>>> >>>>> I have upload the ortophoto on "fiware" workspace and also texture >>>>> with appropriate names to be able to see them in my Client examples: >>>>> + >>>>> http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml >>>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml >>>>> >>>>> As you will see, selecting the terrain texture, the new layer appears >>>>> (surprisingly, the one of other workspace also). But if I try to select the >>>>> terrain layer (first box of GIS client), you will see that the one uploaded >>>>> with the name "ODE_test_terrain" does not appear. Maybe I didn't explain >>>>> correctly in my previous email, but this layer is the altitude layer, the >>>>> shape. So I suppose that the W3DS options have to be defined, but if you >>>>> access to that layer on our testing server ( >>>>> http://151.80.143.120:8080/geoserver . User: admin Pass: geoserver) >>>>> you will see that I cannot access to the W3DS tab of "ODE_test_terrain" >>>>> layer to make it "Active" and "Queryable" and maybe other options required >>>>> on the GIS client to be able to require it as the shape of the terrain. >>>>> >>>>> Which could be the problem? >>>>> >>>>> Just one more thing. I am selected on one of the FIWARE accelerators >>>>> (Finodex) to develop services with Fiware tools. As you imagine, this >>>>> enabler is one that I am using. They required me to put them (fiware >>>>> coaches of Finodex accelerator) in CC on this discussion emails to follow >>>>> the evolution of our project. So I will put them in CC on the next email. I >>>>> suppose there is no problem on this, is it? >>>>> >>>>> Best regards, >>>>> Ibon >>>>> >>>>> >>>>> 2015-06-23 8:38 GMT+02:00 Sami J : >>>>> >>>>>> Hi Ibon, >>>>>> thank you for the feedback, I need to update user guide about this >>>>>> issue. Textures are queried via geoserver's WMS-interface. This interface >>>>>> isn't related to W3DS-module and therefore there's no need >>>>>> to declare W3DS related options for the texture layer. So when you >>>>>> define texture layer which you want to use as a texture for 3D terrain, it >>>>>> is enough to define options under "Data"-tab. >>>>>> >>>>>> Best regards, >>>>>> Sami >>>>>> >>>>>> On Mon, Jun 22, 2015 at 6:21 PM, Ibon Salbidegoitia < >>>>>> ibon.salbi at gmail.com> wrote: >>>>>> >>>>>>> Hi Sami, >>>>>>> >>>>>>> Thank you. Yes I knew that because I saw it in the JS code you >>>>>>> mention. >>>>>>> I was going to change the ortophoto and texture to workspace to >>>>>>> "fiware" for that reason, but being honest I didn't test it because I found >>>>>>> the error I described in my previous email. I mean, I was trying to access >>>>>>> the texture layer W3DS tab to make it "Active" and "Queryable" as required >>>>>>> on the wiki, so that's the reason I sent you the error, because I though >>>>>>> that it wouldn't be possible to go ahead without changing the texture the >>>>>>> configuration. >>>>>>> >>>>>>> So, if I am wrong and it is not necessary to configure the W3DS tab, >>>>>>> I will try it. I don't need from you to change the JS code to find texture >>>>>>> and photos of all the workspace. I will change the data to "fiware" >>>>>>> workspae. >>>>>>> >>>>>>> I will tell you if everything goes well. >>>>>>> Best regards, >>>>>>> >>>>>>> Ibon >>>>>>> >>>>>>> >>>>>>> 2015-06-22 9:05 GMT+02:00 Sami J : >>>>>>> >>>>>>>> Hi Ibon, >>>>>>>> nice to hear you have been able to progress in your work! >>>>>>>> >>>>>>>> Let me answer behalf Juha: Your texture data seems to be ok. In >>>>>>>> case you are using GIS GE reference client problem with the texture loading >>>>>>>> might be with the used workspace. GIS GE reference client assumes that all >>>>>>>> data is in "fiware"-workspace. This applies also for the textures. So >>>>>>>> changing texture workspace to "fiware" might solve loading problem. >>>>>>>> >>>>>>>> If you'd like to modify reference client to support also other >>>>>>>> workspaces, URI for texture loading is defined in the scenemngr.js >>>>>>>> getElements-function. You can modify URL created in there. >>>>>>>> >>>>>>>> Best regards, >>>>>>>> Sami >>>>>>>> >>>>>>>> >>>>>>>> On Mon, Jun 22, 2015 at 9:05 AM, Juha Hyv?rinen < >>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>> >>>>>>>>> >>>>>>>>> ---------- Forwarded message ---------- >>>>>>>>> From: Ibon Salbidegoitia >>>>>>>>> Date: Thu, Jun 18, 2015 at 11:05 AM >>>>>>>>> Subject: Re: W3DS - FIWARE >>>>>>>>> To: Juha Hyv?rinen >>>>>>>>> >>>>>>>>> >>>>>>>>> Hi Juha, >>>>>>>>> >>>>>>>>> I checked that many changes where done on the data and wiki. >>>>>>>>> Congratulations! Now everything is very clear! >>>>>>>>> >>>>>>>>> I write you because I have some doubts about the texture data. On >>>>>>>>> the wiki "User and Programmers Guide" section "3.3.3 Adding texture" the >>>>>>>>> last sentence says that one option is to store texture on a GeoTIFF. >>>>>>>>> I used the following GeoTIFF texture (MDT) data on float32 format >>>>>>>>> to try it. You can download it here: >>>>>>>>> ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip >>>>>>>>> >>>>>>>>> The file has been uploaded to Geoserver. As it does not recognize >>>>>>>>> the SRS, I defined whichis the EPSG:25830. >>>>>>>>> As it says in the Unit Testing Plan, I have to go to W3DS tab to >>>>>>>>> activate and make it queryable. >>>>>>>>> However, it returns an error on JIRA. >>>>>>>>> >>>>>>>>> You can check it in our geoserver: >>>>>>>>> http://151.80.143.120:8080/geoserver/ >>>>>>>>> + User: admin >>>>>>>>> + Pass: geoserver >>>>>>>>> >>>>>>>>> The GeoTIFF texture is defined on the layer "terrain" , on >>>>>>>>> workspace "ODE" >>>>>>>>> Please let me know why this option is not available. >>>>>>>>> Best regards, >>>>>>>>> >>>>>>>>> Ibon >>>>>>>>> >>>>>>>>> >>>>>>>>> 2015-06-02 18:20 GMT+02:00 Ibon Salbidegoitia < >>>>>>>>> ibon.salbi at gmail.com>: >>>>>>>>> >>>>>>>>>> Hi Juha, >>>>>>>>>> >>>>>>>>>> I have been able to run GIS Client examples: >>>>>>>>>> + >>>>>>>>>> http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml >>>>>>>>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml >>>>>>>>>> >>>>>>>>>> As you can see in the attached pictures, there seems to be some >>>>>>>>>> problems with space between layers and I cannot see the xml3d buildings on >>>>>>>>>> the examples. >>>>>>>>>> Do you know where the buildings should appear? >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Just as comment, I have found more bugs that may improve the Unit >>>>>>>>>> Testing Plan. I list all of them below if you are interested on changing >>>>>>>>>> them >>>>>>>>>> >>>>>>>>>> *On wiki*: >>>>>>>>>> 1.2.2.4 PostGIS connection to GeoServer >>>>>>>>>> + When Publish fiware_test_terrain PostGIS - PostGIS Database >>>>>>>>>> In "Objects Attributes" section select "name" for the >>>>>>>>>> "Object ID" it is not possible because only options are [elevation / geom / >>>>>>>>>> lod]. The documentation seems to need to select "name" when it does not >>>>>>>>>> exist. >>>>>>>>>> >>>>>>>>>> 1.2.3.2 terrain_texture_orto.tif and terrain_texture_raster.tif >>>>>>>>>> + Raster_map_image_for_terrain_texture/terrain_texture_raster.tif >>>>>>>>>> SRS is automatically set to EPSG:404000. Not EPSG:3067 as it >>>>>>>>>> is said on the wiki >>>>>>>>>> + Aero_photo_for_terrain_texture/terrain_texture_orto.tif >>>>>>>>>> SRS is automatically set to EPSG:3067. Not EPSG:404000 as it >>>>>>>>>> is said on the wiki >>>>>>>>>> >>>>>>>>>> *On GIS Client*: >>>>>>>>>> Version 4.3.2 >>>>>>>>>> + The both examples () have changed the script "map.js" and >>>>>>>>>> now it is not automatically defined "baseUrl" variable as previous version >>>>>>>>>> 4.2.2. It will be recommended to use the code lines: >>>>>>>>>> var ip = location.host; >>>>>>>>>> var baseUrl = "http://"+ip+"/geoserver/"; >>>>>>>>>> >>>>>>>>>> *On MIWI-GISDataProvider download section*: >>>>>>>>>> + Version 4.3.2 >>>>>>>>>> - Test assest 4.3.2 ZIP file has a space between text and >>>>>>>>>> version numbers -> >>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>> - ZIP file when decompressed has a folder with a space >>>>>>>>>> between text ("rel") and numbers ("4.3.2") -> rel\ 4.3.2 >>>>>>>>>> - Subfolders of Test_assest "Building_coordinates /" and >>>>>>>>>> "PostGIS_database_backup /" have a space at the end of the name. >>>>>>>>>> + Version 4.2.2 >>>>>>>>>> - Subfolders of Test_assest "Building_coordinates /" and >>>>>>>>>> "PostGIS_database_backup /" have a space at the end of the name. >>>>>>>>>> >>>>>>>>>> Best regards, >>>>>>>>>> >>>>>>>>>> Ibon >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> 2015-06-02 11:59 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>> >>>>>>>>>>> Hi Ibon, >>>>>>>>>>> >>>>>>>>>>> Thank you for feedback about test asset naming problems, I >>>>>>>>>>> wasn't aware of those and I have informed my colleague who have made those >>>>>>>>>>> packages. He will fix those tomorrow. >>>>>>>>>>> >>>>>>>>>>> Building coordinates are needed if you want to use external 3D >>>>>>>>>>> models in your application with real spatial information. For example hand >>>>>>>>>>> made building models placed in correct position etc. If you don't need >>>>>>>>>>> those then that step is optional. >>>>>>>>>>> >>>>>>>>>>> We also updated guide for database restoring and it can be found >>>>>>>>>>> from here: >>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan#Import_PostGIS_database_backup_with_terrain_data >>>>>>>>>>> >>>>>>>>>>> Your problem was that username in the database backup was >>>>>>>>>>> defined to be 'sami' and it does not exist in your system. It is fixed by >>>>>>>>>>> ignoring username from the database backup. >>>>>>>>>>> >>>>>>>>>>> Before restoring that database backup you should drop >>>>>>>>>>> fiware_test_terrain table. >>>>>>>>>>> >>>>>>>>>>> Let me know if this was helpful. >>>>>>>>>>> >>>>>>>>>>> - Juha >>>>>>>>>>> >>>>>>>>>>> On Tue, Jun 2, 2015 at 11:41 AM, Ibon Salbidegoitia < >>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>> >>>>>>>>>>>> Sorry I send previous email without finishing the email as >>>>>>>>>>>> error. You have below all the email. >>>>>>>>>>>> >>>>>>>>>>>> Hi Juha, >>>>>>>>>>>> >>>>>>>>>>>> Sorry for the delay, I was busy and these last 3 days I had >>>>>>>>>>>> some problems with tomcat so I decided to format everything and start from >>>>>>>>>>>> the beginning to know what errors are happening. >>>>>>>>>>>> I will try to explain cronologically all the steps and >>>>>>>>>>>> error/bugs found. >>>>>>>>>>>> >>>>>>>>>>>> First of all I update git repository and change to the >>>>>>>>>>>> "fiware_rel_4.x" branch to create the WAR file with the maven command: mvn >>>>>>>>>>>> install -DdownloadSources=true -DskipTests=true -Pw3ds >>>>>>>>>>>> After restarting tomcat, the geoserver seems to work -> >>>>>>>>>>>> http://151.80.143.120:8080/geoserver (User: admin / >>>>>>>>>>>> Pass: geoserver) >>>>>>>>>>>> I did not use the WAR published, I created my own from the new >>>>>>>>>>>> github branch as you see. >>>>>>>>>>>> >>>>>>>>>>>> So then I decided to update the test unit plan. Here I have one >>>>>>>>>>>> comment just to improve in case you want. I have checked that you usually >>>>>>>>>>>> use "space" on folders and files which usually is no suitable. I refer >>>>>>>>>>>> specificly to the 4.3.2 version. >>>>>>>>>>>> + The ZIP file has a "space" on the name what requires to >>>>>>>>>>>> use ASCI character to download: wget --no-check-certificate >>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>>> + When ZIP is decompressed, the name of the folder has also >>>>>>>>>>>> a "space": /home/UnitTestPlan/rel\ 4.3.2 >>>>>>>>>>>> + PostGIS database backup has also a "space" at the >>>>>>>>>>>> end: /home/UnitTestPlan/rel\ 4.3.2/PostGIS_database_backup\ / >>>>>>>>>>>> >>>>>>>>>>>> Any way, I continue with the database restore. On the PostGIS >>>>>>>>>>>> database backup, I checked on the 4.3.2 version that there are 2 >>>>>>>>>>>> files: building_coordinates and test_asset-terrain. >>>>>>>>>>>> The "building_coordinates" file appears to be a text format >>>>>>>>>>>> dump. So is this file necessary to upload to database? >>>>>>>>>>>> The "test_asset-terrain" could be uploaded to postgres with the >>>>>>>>>>>> following command: pg_restore -d fiware_test /home/UnitTestPlan/rel\ >>>>>>>>>>>> 4.3.2/PostGIS_database_backup\ /FIWARE-postgis-test_asset-terrain >>>>>>>>>>>> However, I receive the following errors: >>>>>>>>>>>> ================================================= >>>>>>>>>>>> pg_restore: [archiver (db)] Error while PROCESSING TOC: >>>>>>>>>>>> pg_restore: [archiver (db)] Error from TOC entry 184; 1259 >>>>>>>>>>>> 65659 TABLE fiware_test_terrain sami >>>>>>>>>>>> pg_restore: [archiver (db)] could not execute query: ERROR: >>>>>>>>>>>> role "sami" does not exist >>>>>>>>>>>> Command was: ALTER TABLE public.fiware_test_terrain OWNER TO >>>>>>>>>>>> sami; >>>>>>>>>>>> >>>>>>>>>>>> pg_restore: [archiver (db)] Error from TOC entry 183; 1259 >>>>>>>>>>>> 65657 SEQUENCE fiware_test_terrain_id_seq sami >>>>>>>>>>>> pg_restore: [archiver (db)] could not execute query: ERROR: >>>>>>>>>>>> role "sami" does not exist >>>>>>>>>>>> Command was: ALTER TABLE public.fiware_test_terrain_id_seq >>>>>>>>>>>> OWNER TO sami; >>>>>>>>>>>> >>>>>>>>>>>> WARNING: errors ignored on restore: 2 >>>>>>>>>>>> ================================================= >>>>>>>>>>>> >>>>>>>>>>>> I checked the information stored from backup on the database >>>>>>>>>>>> and found the following tables, which I am not sure if they are all or >>>>>>>>>>>> there are some missing. >>>>>>>>>>>> ================================================= >>>>>>>>>>>> List of relations >>>>>>>>>>>> Schema | Name | Type | Owner >>>>>>>>>>>> --------+----------------------------+----------+---------- >>>>>>>>>>>> public | fiware_test_terrain | table | postgres >>>>>>>>>>>> public | fiware_test_terrain_id_seq | sequence | postgres >>>>>>>>>>>> public | geography_columns | view | postgres >>>>>>>>>>>> public | geometry_columns | view | postgres >>>>>>>>>>>> public | raster_columns | view | postgres >>>>>>>>>>>> public | raster_overviews | view | postgres >>>>>>>>>>>> public | spatial_ref_sys | table | postgres >>>>>>>>>>>> ================================================= >>>>>>>>>>>> >>>>>>>>>>>> I did not continue because it seems that there are some errors >>>>>>>>>>>> that I should first understand and fix before continuing. >>>>>>>>>>>> If you need something else from my side, please let me know. >>>>>>>>>>>> And please, let me know if I have done something wrong. >>>>>>>>>>>> Thank you. Best regards, >>>>>>>>>>>> >>>>>>>>>>>> Ibon >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> 2015-06-02 8:33 GMT+00:00 Ibon Salbidegoitia < >>>>>>>>>>>> ibon.salbi at gmail.com>: >>>>>>>>>>>> >>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>> >>>>>>>>>>>>> Sorry for the delay, I was busy and these last 3 days I had >>>>>>>>>>>>> some problems with tomcat so I decided to format everything and start from >>>>>>>>>>>>> the beginning to know what errors are happening. >>>>>>>>>>>>> I will try to explain cronologically all the steps and >>>>>>>>>>>>> error/bugs found. >>>>>>>>>>>>> >>>>>>>>>>>>> First of all I update git repository and change to the >>>>>>>>>>>>> "fiware_rel_4.x" branch to create the WAR file with the maven command: mvn >>>>>>>>>>>>> install -DdownloadSources=true -DskipTests=true -Pw3ds >>>>>>>>>>>>> After restarting tomcat, the geoserver seems to work -> >>>>>>>>>>>>> http://151.80.143.120:8080/geoserver (User: admin / >>>>>>>>>>>>> Pass: geoserver) >>>>>>>>>>>>> I did not use the WAR published, I created my own from the new >>>>>>>>>>>>> github branch as you see. >>>>>>>>>>>>> >>>>>>>>>>>>> So then I decided to update the test unit plan. Here I have >>>>>>>>>>>>> one comment just to improve in case you want. I have checked that you >>>>>>>>>>>>> usually use "space" on folders and files which usually is no suitable. I >>>>>>>>>>>>> refer specificly to the 4.3.2 version. >>>>>>>>>>>>> + The ZIP file has a "space" on the name what requires to >>>>>>>>>>>>> use ASCI character to download: wget --no-check-certificate >>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>>>> + When ZIP is decompressed, the name of the folder has also >>>>>>>>>>>>> a "space": /home/UnitTestPlan/rel\ 4.3.2 >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> 2015-05-26 12:49 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>> >>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>> >>>>>>>>>>>>>> That problem should now be fixed, code is in the github ( >>>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver/tree/fiware_rel_4.x) >>>>>>>>>>>>>> and we have also published new war file in Fiware FusionForge ( >>>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1643/geoserver.war >>>>>>>>>>>>>> ). >>>>>>>>>>>>>> >>>>>>>>>>>>>> We also updated test assets and reference client. Updated >>>>>>>>>>>>>> reference client is already available from the Github and test assets will >>>>>>>>>>>>>> be published later today or tomorrow morning to FusionForge under release >>>>>>>>>>>>>> 4.3.2 (https://forge.fiware.org/frs/?group_id=7). >>>>>>>>>>>>>> >>>>>>>>>>>>>> I hope that this release will fix problems you encountered >>>>>>>>>>>>>> earlier. Please report back did this solve those problems. Thank you for >>>>>>>>>>>>>> submitting these bug reports. >>>>>>>>>>>>>> >>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Tue, May 26, 2015 at 9:33 AM, Juha Hyv?rinen < >>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> We have looked into that problem now for couple of days and >>>>>>>>>>>>>>> it seems to be somehow related to Tomcat and system locale settings. We can >>>>>>>>>>>>>>> reproduce same problem when we deploy to a Tomcat instance while with Jetty >>>>>>>>>>>>>>> everything works just fine. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I'm working with the fix now, but there is also a >>>>>>>>>>>>>>> workaround: deploy war package to a Jetty instance. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I will notify you once I have pushed code changes to git. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Fri, May 22, 2015 at 1:08 PM, Juha Hyv?rinen < >>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I also forgot to mention that you should move to newer test >>>>>>>>>>>>>>>> client which we will release officially during summer, but code is already >>>>>>>>>>>>>>>> available from the Github: >>>>>>>>>>>>>>>> https://github.com/Cyberlightning/Cyber-WeX >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Client code can be found from here: >>>>>>>>>>>>>>>> https://github.com/Cyberlightning/Cyber-WeX/tree/master/GIS/GIS_Client_xml3d >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Fri, May 22, 2015 at 12:30 PM, Juha Hyv?rinen < >>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I have to admit that I'm clueless with that terrain >>>>>>>>>>>>>>>>> problem, since I couldn't replicate it. Everything seems to be right at the >>>>>>>>>>>>>>>>> server side but still data is somehow corrupted when it arrives to the >>>>>>>>>>>>>>>>> client. We have deployed that same data set without any problems to more >>>>>>>>>>>>>>>>> than 20 different systems by many different users during our internal >>>>>>>>>>>>>>>>> development and testing. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> There are still few points which you could try. >>>>>>>>>>>>>>>>> 1. Install newer PostGIS version for example from Ubuntu >>>>>>>>>>>>>>>>> repositories instead of manually build one. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> 2. Try our upcoming release of Geoserver from Github. This >>>>>>>>>>>>>>>>> shouldn't be difficult, since you already build your own version. >>>>>>>>>>>>>>>>> If you used git to clone code earlier, you only need to >>>>>>>>>>>>>>>>> pull new changes from the repository and change code branch from fiware to >>>>>>>>>>>>>>>>> fiware_rel_4.x (git pull && git checkout fiware_rel_4.x) and rebuild >>>>>>>>>>>>>>>>> project. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Also I created database dump from building coordinates >>>>>>>>>>>>>>>>> table and it's as an attachment. We will add it also to the assets and >>>>>>>>>>>>>>>>> update documentation once we have little spare time to do it. Table can be >>>>>>>>>>>>>>>>> restored with command: sudo -u postgres psql databasename < >>>>>>>>>>>>>>>>> path/to/the/file.sql >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Before restoring that dumb, change URLs in it to point a >>>>>>>>>>>>>>>>> place where you actually have that xml file. At the moment URL is >>>>>>>>>>>>>>>>> http://localhost/Test_asset/Building_model/building.xml >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Thu, May 21, 2015 at 1:09 PM, Ibon Salbidegoitia < >>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> You are right, I forgot to edit the tomcat7 default >>>>>>>>>>>>>>>>>> start-up configuration file. >>>>>>>>>>>>>>>>>> Now is using openJDK. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> 2015-05-21 9:36 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Could you restart tomcat again since it still uses >>>>>>>>>>>>>>>>>>> Oracle java 1.8. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Thu, May 21, 2015 at 10:57 AM, Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> I checked that tomcat was down due to low xmx size. I >>>>>>>>>>>>>>>>>>>> restarted and modify xmx to avoid errors. >>>>>>>>>>>>>>>>>>>> Asnwering to your comments: >>>>>>>>>>>>>>>>>>>> + Please let me know when you update the >>>>>>>>>>>>>>>>>>>> documentation to check importin building coordinates >>>>>>>>>>>>>>>>>>>> + I imported with following command of postgres: >>>>>>>>>>>>>>>>>>>> $ su - postgres >>>>>>>>>>>>>>>>>>>> $ createdb fiware_test >>>>>>>>>>>>>>>>>>>> $ pg_restore -d fiware_test >>>>>>>>>>>>>>>>>>>> ./Test_asset_3.3/PostGIS_database_backup\ /FIWARE-postgis-test_asset >>>>>>>>>>>>>>>>>>>> Because I am using remote server I cannot use >>>>>>>>>>>>>>>>>>>> pgadmin, but the import was correct without errors and I checked that the >>>>>>>>>>>>>>>>>>>> data was correct. >>>>>>>>>>>>>>>>>>>> + I am using Oracle java (1.8.0_31), so I will >>>>>>>>>>>>>>>>>>>> change it to openJDK7 as you recommend. Now is changed to openJDK7 to >>>>>>>>>>>>>>>>>>>> version 1.7.0_79 >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> As I said, the Geoserver is active, so you can check on >>>>>>>>>>>>>>>>>>>> it whatever you want. >>>>>>>>>>>>>>>>>>>> Kind regards, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> 2015-05-21 6:56 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I was looking into those errors you reported but your >>>>>>>>>>>>>>>>>>>>> server went down before I could figure out any final solution. Here are my >>>>>>>>>>>>>>>>>>>>> thoughts so far. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I noticed that something have went wrong at least with >>>>>>>>>>>>>>>>>>>>> building coordinate importing and we will update documentation how to >>>>>>>>>>>>>>>>>>>>> import those properly. I can notice you once that is done. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I also would like to make sure that >>>>>>>>>>>>>>>>>>>>> fiware:fiware_test_terrain is data set provided by us and you imported it >>>>>>>>>>>>>>>>>>>>> to the database as instructed with pgAdmin? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Third point: in the past I had some problems with >>>>>>>>>>>>>>>>>>>>> Geoserver when we used Oracle java, so please make sure that you use >>>>>>>>>>>>>>>>>>>>> openJDK7. You can check used Java version with commad: >>>>>>>>>>>>>>>>>>>>> java -version >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> result should be something similar: >>>>>>>>>>>>>>>>>>>>> ----------------- >>>>>>>>>>>>>>>>>>>>> :~$ java -version >>>>>>>>>>>>>>>>>>>>> java version "1.7.0_79" >>>>>>>>>>>>>>>>>>>>> OpenJDK Runtime Environment (IcedTea 2.5.5) >>>>>>>>>>>>>>>>>>>>> (7u79-2.5.5-0ubuntu0.14.04.2) >>>>>>>>>>>>>>>>>>>>> OpenJDK 64-Bit Server VM (build 24.79-b02, mixed mode) >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> If not, change default java version with command: >>>>>>>>>>>>>>>>>>>>> sudo update-alternatives --config java >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Mon, May 18, 2015 at 10:34 AM, Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> The last couple of months I have been learning and >>>>>>>>>>>>>>>>>>>>>> understanding all the things that we discussed 2 months ago. >>>>>>>>>>>>>>>>>>>>>> Once I knew how to do most of the things, I tried to >>>>>>>>>>>>>>>>>>>>>> do the "Unit Testing Plan" from the Wiki ( >>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan >>>>>>>>>>>>>>>>>>>>>> ) >>>>>>>>>>>>>>>>>>>>>> I have found some bugs/errors that I think they >>>>>>>>>>>>>>>>>>>>>> should be corrected if possible: >>>>>>>>>>>>>>>>>>>>>> + Section: 1.2.2.3 PostGIS connection to GeoServer >>>>>>>>>>>>>>>>>>>>>> + terrain_texture_raste has a EPSG:404000 SRS (set by >>>>>>>>>>>>>>>>>>>>>> default) >>>>>>>>>>>>>>>>>>>>>> + terrain_texture_orto has a EPSG:3067 SRS (set by >>>>>>>>>>>>>>>>>>>>>> default) >>>>>>>>>>>>>>>>>>>>>> + Section: 1.2.3.2 terrain_texture_orto.tif and >>>>>>>>>>>>>>>>>>>>>> terrain_texture_raster.tif >>>>>>>>>>>>>>>>>>>>>> + On building_coordinates SRS is not automatically >>>>>>>>>>>>>>>>>>>>>> assigned >>>>>>>>>>>>>>>>>>>>>> + On building_coordinates table, when SRS EPSG:3047 >>>>>>>>>>>>>>>>>>>>>> value is introduced manually, the "Bounding Box" values seem to be wrong >>>>>>>>>>>>>>>>>>>>>> assigned >>>>>>>>>>>>>>>>>>>>>> + Select Activate and Queryable in the W3DS Settings, >>>>>>>>>>>>>>>>>>>>>> it is not clear if it is for both tables >>>>>>>>>>>>>>>>>>>>>> + In Objects Attributes select name for the Object >>>>>>>>>>>>>>>>>>>>>> ID. Only for building_coordinates table, because fiware_test_terrain table >>>>>>>>>>>>>>>>>>>>>> has not got this Object ID. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I have follow everything sucessfully but at the end, >>>>>>>>>>>>>>>>>>>>>> it is not possible to see the correct result ( >>>>>>>>>>>>>>>>>>>>>> http://151.80.143.120/GIS/). I am not sure if it is >>>>>>>>>>>>>>>>>>>>>> for the "building_coordinates" bounding box values or what. >>>>>>>>>>>>>>>>>>>>>> You can check on Geoserver that everything is correct >>>>>>>>>>>>>>>>>>>>>> (http://151.80.143.120/geoserver User: admin >>>>>>>>>>>>>>>>>>>>>> Pass: geoserver. The server is a server to test this W3DS service only, so >>>>>>>>>>>>>>>>>>>>>> you can use it without any problems) >>>>>>>>>>>>>>>>>>>>>> So something seems that it is not correctly working. >>>>>>>>>>>>>>>>>>>>>> What can it be? (All the data was correctly imported to PostGIS without >>>>>>>>>>>>>>>>>>>>>> errors) >>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Best regards, >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> 2015-03-26 7:42 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I have been out of office and didn't have time to >>>>>>>>>>>>>>>>>>>>>>> reply earlier. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> EPSG:900913 is map projection defined by Google and >>>>>>>>>>>>>>>>>>>>>>> it's using lat/lon coordinates. At the moment requesting data from >>>>>>>>>>>>>>>>>>>>>>> non-metric coordinate systems will result erroneous output. Some projection >>>>>>>>>>>>>>>>>>>>>>> tools may use that as a default projection if it's undefined. I suggest >>>>>>>>>>>>>>>>>>>>>>> that you check your projection definitions from importing code and if you >>>>>>>>>>>>>>>>>>>>>>> didn't set any coordinate system set one. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I also quickly checked that one tile you provided >>>>>>>>>>>>>>>>>>>>>>> and there was a lot no-data values. You could probably get better results >>>>>>>>>>>>>>>>>>>>>>> if you select input data from area where there are actually data to show. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Please note that only UTM coordinate systems (or >>>>>>>>>>>>>>>>>>>>>>> similar) are supported by W3DS module. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> For visualization you can use sample client provided >>>>>>>>>>>>>>>>>>>>>>> within FIWARE project. It is quite simple and you shouldn't have any >>>>>>>>>>>>>>>>>>>>>>> problems to understand how it does requests to the server and visualize >>>>>>>>>>>>>>>>>>>>>>> received 3D data. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Wed, Mar 18, 2015 at 10:11 AM, Ibon Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I have been searching and found that my data is >>>>>>>>>>>>>>>>>>>>>>>> in EPSG:900913 and now the layer is published and I can see it. >>>>>>>>>>>>>>>>>>>>>>>> Is this the correct way to publish it? >>>>>>>>>>>>>>>>>>>>>>>> So now, I am supposed to use the 3D capabilities to >>>>>>>>>>>>>>>>>>>>>>>> visualize in 3D. I have checked the XML3D link that you sent me but I don't >>>>>>>>>>>>>>>>>>>>>>>> understand how I have to apply to visualize the layer in 3D. >>>>>>>>>>>>>>>>>>>>>>>> Can you please be more specific or give me some >>>>>>>>>>>>>>>>>>>>>>>> help? >>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> 2015-03-18 7:13 GMT+00:00 Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com>: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> I have been able to introduce the XYZ files (*.asc >>>>>>>>>>>>>>>>>>>>>>>>> in my case) to the Postgre database with the PostGIS extension. >>>>>>>>>>>>>>>>>>>>>>>>> I am able to see the layer from the Geoserver but >>>>>>>>>>>>>>>>>>>>>>>>> I have some doubts about the data to be introduced that I don't know how to >>>>>>>>>>>>>>>>>>>>>>>>> fill when Geoserver asks for publishing the layer. >>>>>>>>>>>>>>>>>>>>>>>>> I have followed the following command lines to >>>>>>>>>>>>>>>>>>>>>>>>> introduce the data to database which I will appreciate if you can tell me >>>>>>>>>>>>>>>>>>>>>>>>> if they are correct. And also, I would like to know how can I publish the >>>>>>>>>>>>>>>>>>>>>>>>> layer because the link that you send me doesn't give me enough information >>>>>>>>>>>>>>>>>>>>>>>>> to be able for that. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> ============================================================================================================== >>>>>>>>>>>>>>>>>>>>>>>>> ===== Download the XYZ data as *.asc file ===== >>>>>>>>>>>>>>>>>>>>>>>>> $ mkdir /root/data >>>>>>>>>>>>>>>>>>>>>>>>> $ cd /root/data >>>>>>>>>>>>>>>>>>>>>>>>> $ wget >>>>>>>>>>>>>>>>>>>>>>>>> ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT/H0037/mdt_037_1_8.zip >>>>>>>>>>>>>>>>>>>>>>>>> $ unzip mdt_037_1_8.zip >>>>>>>>>>>>>>>>>>>>>>>>> $ gdal_polygonize.py -f "ESRI Shapefile" >>>>>>>>>>>>>>>>>>>>>>>>> mdt_037_1_8.asc mdt_037_1_8.shp >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> ===== Create database on Postgre as postgres user >>>>>>>>>>>>>>>>>>>>>>>>> ===== >>>>>>>>>>>>>>>>>>>>>>>>> $ su - postgres >>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres -d postgres >>>>>>>>>>>>>>>>>>>>>>>>> $ create database [yourdatabase]; >>>>>>>>>>>>>>>>>>>>>>>>> -> CREATE DATABASE >>>>>>>>>>>>>>>>>>>>>>>>> $ \list >>>>>>>>>>>>>>>>>>>>>>>>> $ \q >>>>>>>>>>>>>>>>>>>>>>>>> $ psql -d [yourdatabase] -c "CREATE EXTENSION >>>>>>>>>>>>>>>>>>>>>>>>> postgis;" >>>>>>>>>>>>>>>>>>>>>>>>> -> CREATE EXTENSION >>>>>>>>>>>>>>>>>>>>>>>>> $ exit >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> ===== Define Postgre password ===== >>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres >>>>>>>>>>>>>>>>>>>>>>>>> $ \password postgres >>>>>>>>>>>>>>>>>>>>>>>>> $ \q >>>>>>>>>>>>>>>>>>>>>>>>> $ exit >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> ===== Import data with "shp2pgsql" utility of >>>>>>>>>>>>>>>>>>>>>>>>> postgis ( >>>>>>>>>>>>>>>>>>>>>>>>> http://www.bostongis.com/pgsql2shp_shp2pgsql_quickguide.bqg) >>>>>>>>>>>>>>>>>>>>>>>>> ===== >>>>>>>>>>>>>>>>>>>>>>>>> $ /root/postgis-2.1.0/loader/shp2pgsql >>>>>>>>>>>>>>>>>>>>>>>>> /root/data/mdt_037_1_8.shp >sql >>>>>>>>>>>>>>>>>>>>>>>>> -> Shapefile type: Polygon >>>>>>>>>>>>>>>>>>>>>>>>> -> Postgis type: MULTIPOLYGON[2] >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> ===== Import created sql to postgre ===== >>>>>>>>>>>>>>>>>>>>>>>>> $ mv sql /var/lib/postgresql/ >>>>>>>>>>>>>>>>>>>>>>>>> $ chmod 777 /var/lib/postgresql/sql >>>>>>>>>>>>>>>>>>>>>>>>> $ su - postgres >>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres -d [yourdatabase] -f sql >>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres -d [yourdatabase] -c "\d" >>>>>>>>>>>>>>>>>>>>>>>>> -> List of relations >>>>>>>>>>>>>>>>>>>>>>>>> -> Schema | Name | Type | >>>>>>>>>>>>>>>>>>>>>>>>> Owner >>>>>>>>>>>>>>>>>>>>>>>>> -> >>>>>>>>>>>>>>>>>>>>>>>>> --------+---------------------+----------+---------- >>>>>>>>>>>>>>>>>>>>>>>>> -> public | geography_columns | view | >>>>>>>>>>>>>>>>>>>>>>>>> postgres >>>>>>>>>>>>>>>>>>>>>>>>> -> public | geometry_columns | view | >>>>>>>>>>>>>>>>>>>>>>>>> postgres >>>>>>>>>>>>>>>>>>>>>>>>> -> public | mdt_037_1_8 | table | >>>>>>>>>>>>>>>>>>>>>>>>> postgres >>>>>>>>>>>>>>>>>>>>>>>>> -> public | mdt_037_1_8_gid_seq | sequence | >>>>>>>>>>>>>>>>>>>>>>>>> postgres >>>>>>>>>>>>>>>>>>>>>>>>> -> ... >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> $ exit >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> ===== Add new workspace ===== >>>>>>>>>>>>>>>>>>>>>>>>> + Name: Fiware >>>>>>>>>>>>>>>>>>>>>>>>> + URI of name space: com.fiware >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> ===== Add new "Data store" on Geoserver ( >>>>>>>>>>>>>>>>>>>>>>>>> http://151.80.143.120:8080/geoserver) ===== >>>>>>>>>>>>>>>>>>>>>>>>> + Select the "PostGIS - PostGIS Database" >>>>>>>>>>>>>>>>>>>>>>>>> vectorial data >>>>>>>>>>>>>>>>>>>>>>>>> + Add data required: >>>>>>>>>>>>>>>>>>>>>>>>> + Workspace: Fiware >>>>>>>>>>>>>>>>>>>>>>>>> + Name of origin data: Fiware_Test1 >>>>>>>>>>>>>>>>>>>>>>>>> + database: fiwaretest1 >>>>>>>>>>>>>>>>>>>>>>>>> + host: localhost >>>>>>>>>>>>>>>>>>>>>>>>> + port: 5432 >>>>>>>>>>>>>>>>>>>>>>>>> + user: postgres >>>>>>>>>>>>>>>>>>>>>>>>> + pass: postgres >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> ===== Add new layer and make public ===== >>>>>>>>>>>>>>>>>>>>>>>>> + Edit layer features??? >>>>>>>>>>>>>>>>>>>>>>>>> + SRS? >>>>>>>>>>>>>>>>>>>>>>>>> + ... >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> ============================================================================================================== >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-03 13:42 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Yes, write all polygons to a single shp file or >>>>>>>>>>>>>>>>>>>>>>>>>> to a single table inside a database and you are good to go. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> I would recommend that you also study some basics >>>>>>>>>>>>>>>>>>>>>>>>>> about rendering engines and search general knowledge what data 3D models >>>>>>>>>>>>>>>>>>>>>>>>>> really keeps inside them. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> In FIWARE we use XML3D as a rendering engine and >>>>>>>>>>>>>>>>>>>>>>>>>> all 3D models produced by GeoServer are in XML3D format. >>>>>>>>>>>>>>>>>>>>>>>>>> Here is one guide how to use XML3D rendering >>>>>>>>>>>>>>>>>>>>>>>>>> engine: >>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/xml3d/xml3d.js/wiki/The-Basics-of-XML3D >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Mar 3, 2015 at 2:53 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for your clarifications. >>>>>>>>>>>>>>>>>>>>>>>>>>> I have some doubts about your comments. >>>>>>>>>>>>>>>>>>>>>>>>>>> I understand how do I have to create the >>>>>>>>>>>>>>>>>>>>>>>>>>> polygons. I have done a python script with the for loops as you said >>>>>>>>>>>>>>>>>>>>>>>>>>> (attached) which creates the POLIGONZs. >>>>>>>>>>>>>>>>>>>>>>>>>>> I have done a SHP file for each polygon, but >>>>>>>>>>>>>>>>>>>>>>>>>>> should I do a single SHP with all the polygons? I suppose that I should do >>>>>>>>>>>>>>>>>>>>>>>>>>> a single SHP because I can have many polygons if the resolution is too >>>>>>>>>>>>>>>>>>>>>>>>>>> high. Or this is not possible? >>>>>>>>>>>>>>>>>>>>>>>>>>> The procedure of writting data to database with psycopg2 >>>>>>>>>>>>>>>>>>>>>>>>>>> is similar, so the same question, all polygons together is it possible? >>>>>>>>>>>>>>>>>>>>>>>>>>> Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-03 11:35 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> I have just updated User and Programmers guide. >>>>>>>>>>>>>>>>>>>>>>>>>>>> I hope that these tips helps you forward. >>>>>>>>>>>>>>>>>>>>>>>>>>>> Added content: >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Data generation from *.xyz file format >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Here is a small sample from source dataset: >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Easting Northing Elevation >>>>>>>>>>>>>>>>>>>>>>>>>>>> --------------------------------- >>>>>>>>>>>>>>>>>>>>>>>>>>>> 398000.000 7542000.000 279.950 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7542000.000 279.388 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7542000.000 278.818 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 398000.000 7541990.000 281.002 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541990.000 280.436 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7541990.000 279.847 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 398000.000 7541980.000 282.096 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541980.000 281.539 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7541980.000 280.944 >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> That data produces following 2D grid: >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 2 >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| >>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 | 398000.000 7542000.000 279.950 | >>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7542000.000 279.388 | 398020.000 7542000.000 278.818 | >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| >>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 | 398000.000 7541990.000 281.002 | >>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541990.000 280.436 | 398020.000 7541990.000 279.847 | >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| >>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 | 398000.000 7541980.000 282.096 | >>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541980.000 281.539 | 398020.000 7541980.000 280.944 | >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> From that grid we can create polygons >>>>>>>>>>>>>>>>>>>>>>>>>>>> representing terrain surface. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> WKT polygons generated from that dataset should >>>>>>>>>>>>>>>>>>>>>>>>>>>> look like this: >>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398000.000 7542000.000 279.950, >>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7542000.000 279.388, 398010.000 7541990.000 280.436, 398000.000 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541990.000 281.002, 398000.000 7542000.000 279.950)) >>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398010.000 7542000.000 279.388, >>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7542000.000 278.818, 398020.000 7541990.000 279.847, 398010.000 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541990.000 280.436, 398010.000 7542000.000 279.388)) >>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398000.000 7541990.000 281.002, >>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541990.000 280.436, 398010.000 7541980.000 281.539, 398000.000 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541980.000 282.096, 398000.000 7541990.000 281.002)) >>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398010.000 7541990.000 280.436, >>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7541990.000 279.847, 398020.000 7541980.000 280.944, 398010.000 >>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541980.000 281.539, 398010.000 7541990.000 280.436)) >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> NOTE: It is said in WKT specification that >>>>>>>>>>>>>>>>>>>>>>>>>>>> polygons needs to be closed, meaning that start and end points are the same. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Each polygon should be written into a PostGIS >>>>>>>>>>>>>>>>>>>>>>>>>>>> database or into a shape file. >>>>>>>>>>>>>>>>>>>>>>>>>>>> - Shapefile writing can be done for example >>>>>>>>>>>>>>>>>>>>>>>>>>>> with python library called pyshp ( >>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/GeospatialPython/pyshp). >>>>>>>>>>>>>>>>>>>>>>>>>>>> - PostGIS can be used for example with psycopg2 >>>>>>>>>>>>>>>>>>>>>>>>>>>> library (http://initd.org/psycopg/). >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Depending on selected storage format choose >>>>>>>>>>>>>>>>>>>>>>>>>>>> corresponding publishing steps for data publishing into a W3DS layer with >>>>>>>>>>>>>>>>>>>>>>>>>>>> GeoServer. >>>>>>>>>>>>>>>>>>>>>>>>>>>> Official GeoServer guide how to publish a >>>>>>>>>>>>>>>>>>>>>>>>>>>> shapefile: >>>>>>>>>>>>>>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/stable/en/user/gettingstarted/shapefile-quickstart/index.html >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Official GeoServer guide how to publish a >>>>>>>>>>>>>>>>>>>>>>>>>>>> PostGIS table: >>>>>>>>>>>>>>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/stable/en/user/gettingstarted/postgis-quickstart/index.html >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Adding texture >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Raster data (f.ex. ortophotos) is used as >>>>>>>>>>>>>>>>>>>>>>>>>>>> terrain texture and guide how to work with rasters can be found from here: >>>>>>>>>>>>>>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/stable/en/user/data/raster/index.html >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Mar 2, 2015 at 6:23 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for the steps. However, I would like >>>>>>>>>>>>>>>>>>>>>>>>>>>>> to clarify some things to have clear what I should do. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Imagine I have the data: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> lat lon alt >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 0 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 1 5 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 2 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 0 5 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 1 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 2 15 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 0 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 1 15 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 2 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> This is like a flat surface. So I have to >>>>>>>>>>>>>>>>>>>>>>>>>>>>> create a 2D array like: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 10 15 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 5 10 15 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 5 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have never create wkt polygons in 3D, but as >>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have seen in some websites, this could be done like this? >>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGON ((0 0 0, 0 1 5, 1 1 10, 1 0 5), (0 1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 5, 0 2 10, 1 1 10, 1 2 15), (1 0 5, 2 0 10, 1 1 10, 2 1 15), (1 1 10, 1 2 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 15, 2 1 15, 2 2 20)) >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> After this, I am not sure how to upload to >>>>>>>>>>>>>>>>>>>>>>>>>>>>> DDBB in shp because I have many files. Also, I don't know how to associate >>>>>>>>>>>>>>>>>>>>>>>>>>>>> the ortophoto to the shapes. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Being honest, I am a little bit lost and I >>>>>>>>>>>>>>>>>>>>>>>>>>>>> would appreciate if you can help me. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-02 7:38 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm sorry to hear that you still have those >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> problems. I'm looking into that and I will report back to you if I'm able >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to reproduce and solve it in some environment. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> At the moment you can't use .tiff file format. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Since XML3D, which we use as a rendering >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> engine, requires that rendered models consist of polygons we had to create >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> polygonal terrain from .asc point grid. In order to reduce processor loads >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> we decided that data should be stored as polygons. In that way data can be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> returned to a client without any further processing. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> We have developed proprietary importing tools >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to support our business cases and therefore I can't provide those directly >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to you but I can describe what we did. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Our workflow from .asc files included three >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> steps: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1. Read asc file and create 2D array from it >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> where each cell is a point from asc file >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2. Inside a for loop select four points from >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> array and create wkt polygon from those points >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 3. Write just created polygon to a database >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> or to a shp file >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> When polygons are stored in a database you >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> need to publish that table in GeoServer as a layer and configure it to use >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> W3DS module. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I hope that this clarifies needed steps from >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> source data to a production use. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Fri, Feb 27, 2015 at 8:04 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I continue trying to find my problem but I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> haven't advance :( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anyway, I don't write for that. I am trying >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to upload xyz format data and some ortophotos to display them with W3DS. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have the data in *.asc files and I have a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> TIF file with all of them merged. As the documentation ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> says that the *.shp, .dbf* and *.shx* files >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> are mandatory, I should convert all *.asc* >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to these formats? I cannot use* .tif*? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> As the documentation syas, I have to upload >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> this files to the server and I suppose that the ortophotos also. However, I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> don't know how to display them afterwards. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Can you explain me? I am in a Fiware >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> European project and as you are the support of Fiware I hope you can help >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> me. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Best regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-24 11:58 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have no glue why it's not loading since >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> personally I haven't ever used that module. You should read GeoServer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> startup logs and check if there are some fatal errors in service loading. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Logs should have something similar lines to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> these: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'wfs', enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'wms', enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'wcs', enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'w3ds', enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Check errors near those. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> There is also GeoServer users mail list and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you probably could get more helpful response from there, since I'm not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> expert in that area. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Feb 24, 2015 at 1:13 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for the comments. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> About the "Importer extension" I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> downloaded the core extension for version 2.6.0 as you said because I show >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that was the version when I install it. So, can you guess the reason of the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> extension for not working. As you explained, W3DS is an isolated module, so >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> it has no sense for not working. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-24 11:08 GMT+00:00 Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> : >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Changes delivered to FIWARE are isolated >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> only to W3DS module and those are written on top of the GeoServer version >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2.6.0. Therefore you need to use extensions written for that specific >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> version. We will move to next stable version 2.7 when it is released later >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> this spring. Currently 2.7 release is in RC1 state. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Our changes are also in the official >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> GeoServer master and 2.7 branches and you could actually try to build >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> either of those and see if build problem still exists. Meanwhile I try to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> replicate your problem in a virtual machine since everything worked well in >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> every physical machines I have access to. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Feb 24, 2015 at 11:13 AM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I continue having a failure message in >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the same test. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have continued looking to the builded >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> version (without tests as I said) and I was trying to use the "Importer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> extension" installed by copying some source from this link: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/latest/en/user/extensions/importer/installing.html >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I copied the files to the folder >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ".../geoserver/src/web/app/target/geoserver/WEB-INF/lib" as it says and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> restart Geoserver, but the extension does not seems to load. Could be due >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to the Geoserver version done for fiware? Or, how could I solve the problem? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-23 11:55 GMT+00:00 Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Only difference between our work chains >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that I was able to find is that I use also clean statement in mvn build >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> command. Could you try that? If it's still not working I try to find some >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> time to reproduce problem in a clean machine. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> mvn clean install >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -DdownloadSources=true -DskipTests=false -Pw3ds >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Resulting following summary: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Reactor Summary: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................................. SUCCESS [2.088s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Core Platform Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .................................. SUCCESS [9.062s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Open Web Service Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [5.411s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Main Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................... SUCCESS [1:58.712s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Security Modules >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................ SUCCESS [0.043s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer JDBC Security Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................ SUCCESS [18.349s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer LDAP Security Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................ SUCCESS [35.825s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................... SUCCESS [1.450s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service 1.0 Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....................... SUCCESS [18.896s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service 1.1 Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....................... SUCCESS [19.249s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service 2.0 Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....................... SUCCESS [46.273s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Feature Service Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................ SUCCESS [1:21.581s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Map Service Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................ SUCCESS [1:27.636s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] KML support for GeoServer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................. SUCCESS [24.646s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoWebCache (GWC) Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .............................. SUCCESS [55.551s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] REST Support Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................... SUCCESS [10.524s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] REST Configuration Service >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Module ..................... SUCCESS [54.318s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Web Modules >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................. SUCCESS [0.028s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Core UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................ SUCCESS [46.005s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] WMS UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [17.764s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GWC UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [23.123s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] WFS UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [10.234s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Demoes Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [16.390s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] WCS UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [12.849s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI Modules >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................... SUCCESS [0.037s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI Core Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [1:14.168s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI JDBC Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [50.839s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI LDAP Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [27.079s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] REST UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................ SUCCESS [10.953s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Community Space >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....................................... SUCCESS [0.027s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web 3D Service >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................ SUCCESS [4.663s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Web Application >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................. SUCCESS [3.207s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Extensions >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .................................. SUCCESS [0.083s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] BUILD SUCCESSFUL >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Total time: 14 minutes 49 seconds >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Finished at: Mon Feb 23 13:26:42 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> EET 2015 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Final Memory: 187M/1400M >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Feb 23, 2015 at 12:33 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I followed the installation guide of >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Fiware for installation. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I used a Ubuntu 14.04 Server 64 bits >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with 4 cores, 8GB RAM and 100GB of HD. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The version of JDK (openjdk-7-jdk) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> is 7u51-2.4.6-1ubuntu4, and postgis 2.1.0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The source that I downloaded is the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> one you shared from git (git clone -b fiware >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver.git >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I followed all the commands so that's >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the reason from asking. I would appreciate if you can tell me what can be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> different. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-20 13:03 GMT+00:00 Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> without knowledge about your build >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> system (used java version, used operating system etc.) and where you >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> downloaded sources I'm not able to help you with this problem. I just >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> tested version which we have delivered to FIWARE ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver/tree/fiware) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and at least it build without any errors in any test cases. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Also, CatalogBuilder is bit out of my >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> knowledge scope. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Fri, Feb 20, 2015 at 1:18 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Sorry, I forget to attach the log. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-20 11:17 GMT+00:00 Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> : >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have one comment about the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> installation. Previously when I installed the geoserver I didn't notice >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> because I was building without tests. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> But I was building geoserver with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> test where I found a failure on: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> testSingleBandedCoverage(org.geoserver.catalog.impl.CatalogBuilderTest) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I attached the log of the output >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> for your information. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> How can I solve this problem? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-05 7:48 GMT+00:00 Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for the reply. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have a xyz format data also so I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> will try to test what you sent me and look for the Unit Testing Plan link >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you sent. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If I have any doubt or problem I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> will come back to you. Thank you. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-05 7:27 GMT+01:00 Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> : >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Data publishing is well >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> documented in GeoServer user manual: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/2.5.x/en/user/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Data which we used in our >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> development was from National >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Land Survey of Finland. Source >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> data was in *-xyz*-format, which >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> contains elevation data with spatial information. With this source >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> information it is possible to generate shapefile consisting polygon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> structure with elevation data. 2D presentation of the converted shapefile >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with elevation points is flat grid, in 3D presentation each grid points are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> in same elevation level as in the real world. Therefore this grid with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> elevation data can be used as source for terrain presentation. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You can also read user guide from: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You can find guide for setting up >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> test setup from here: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ---------- Forwarded message >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ---------- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> From: Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Date: Wed, Feb 4, 2015 at 12:35 AM >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Subject: W3DS - FIWARE >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> To: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> miika.santala at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Dear Miika, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I am Ibon from Spain. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I write to you because I am >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> involved in the FIWARE European project. This project promote a GIS data >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> provider with the W3DS for 3D visualization as the one you show on the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> following link: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://130.206.81.238:8080/gis_test_client/index.xhtml >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I contact you because a have been >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> in contact with Jorge Gustavo, who made a similar use of W3DS >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.sigte.udg.edu/jornadassiglibre2012/uploads/presentaciones_12/p43.pdf) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and he told me that W3DS is now supported by you. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have followed the instructions >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of FIWARE wiki ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Installation_and_Administration_Guide) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to start using the service and everything seems to work perfectly with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Jetty. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> However, I would like to know how >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have to store GIS data with 3D >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> information straight to GeoServer. Is there any documentation of how to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> upload this kind of information? Can you share with me any documentation >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> about it? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Yours >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sincerely, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> material are confidential and may contain legally privileged information. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you are not the intended recipient, please contact the sender and delete >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the e-mail from your system without producing, distributing or retaining >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> copies thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> are confidential and may contain legally privileged information. If you are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> are confidential and may contain legally privileged information. If you are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are confidential >>>>>>>>>>>>>>>>>>>>> and may contain legally privileged information. If you are not the intended >>>>>>>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> This e-mail and all attached material are confidential >>>>>>>>>>>>>>>>>>> and may contain legally privileged information. If you are not the intended >>>>>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> This e-mail and all attached material are confidential and >>>>>>>>>>>>>>>>> may contain legally privileged information. If you are not the intended >>>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> This e-mail and all attached material are confidential and >>>>>>>>>>>>>>>> may contain legally privileged information. If you are not the intended >>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> ... > > [Mensaje recortado] -------------- next part -------------- An HTML attachment was scrubbed... URL: From ibon.salbi at gmail.com Mon Jul 13 13:16:17 2015 From: ibon.salbi at gmail.com (Ibon Salbidegoitia) Date: Mon, 13 Jul 2015 11:16:17 +0000 Subject: [Fiware-finodex-coaching] W3DS - FIWARE In-Reply-To: References: Message-ID: Hi Juha, I have seen from an automatic reply email that Sami is going to be on holidays till 31st of July. Is there any other technical support who can give me feedback about the Fiware Enabler developed by Cyberlightning? Best regards, Ibon 2015-07-13 11:10 GMT+00:00 Ibon Salbidegoitia : > Hi Sami, > > I haven't received reply for the issue I told you in my previous email. > Can you please confirm me that you received? If so, can you tell me the > situation? > Should I put Juha in Cc for all this process? > Thank you in advance. Best regards, > > Ibon > > > 2015-07-01 17:20 GMT+00:00 Ibon Salbidegoitia : > >> Hi Sami, >> >> First of all, as I mentioned in a previous email, I have put in Cc our >> Fiware Accelerator (Finodex) coaches as they requested in a meeting with >> them to follow the situation of each project that they are supporting. >> >> About your previous email, the last release is working! I have test it in >> our test server (http://151.80.143.120/GIS_4.3.3/) and the DEM works >> with the data provided as test. >> I have checked that the test requires the textures to have "texture" on >> their names and "DEM" for terrain DEM. I have upload my data to test it but >> I have the following problems: >> >> 1. When I preview your DEM (DEM_geotiff_terrain_EPSG3067) I can see >> on geoserver a grayscale image on openlayers (openlayers example >> >> ). >> >> I have seen that the tiff is a float32 image in grayscale with >> a 281.604 minimum value and 792.834 maximum value . >> >> I have upload a similar DEM called "DEM_ODE_terrain" that it can be >> selected from the DEM GIS Client example (on previous link). This image is >> also float32 tiff with a minimum value of -3.40282e+38 and maximum >> of 1545.84, where minimum value is a NoData value as it is shown with >> gdalinfo command: NoData Value=-3.4028234663852886e+38 >> The TIF image I use it can be found here: >> ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip >> The geodesic system of this TIF is ETRS89 that correponds to SRS >> EPSG:25830. However the preview seems to be a 0-1 grayscale image as you >> can see here >> (takes >> some seconds as it is big). This could be due to the NoData values >> that make range so big not taking into account that the data does not >> exist. This is correct? >> >> 2. The Terrain texture also has been uploaded to Geoserver as can be >> seen here >> >> . >> The DEM testing client gives the oportunity to select both layers >> mentioned (for terrain DEM + terrain texture), however nothing appears, >> only one small gray square looking upwards (on zenith) with the camera on >> the client as the altitudes are higher than the ones from the examples. >> >> So everything from test seems to work correctly, but when I introduce my >> data, the DEM test client does not seem to work. >> Could it be due to NoData values? Anyway, why the ortophoto inserted is >> shown as gray layer? >> >> Best regards, >> Ibon >> >> >> 2015-06-30 11:33 GMT+00:00 Sami J : >> >>> Hi Ibon, >>> sorry about late response. We have now made new release from both server >>> and example client, these can be found from the forge under *MIWI-GISDataProvider >>> 4.3.3*-release: https://forge.fiware.org/frs/?group_id=7 >>> source code has been uploaded also to the github. >>> >>> Short documentation related using DEM images can be found from: >>> http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide#World_Wind_Format_Module >>> >>> Installation document covers how to upload DEM image to geoserver: >>> http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Installation_and_Administration_Guide#GeoTIFF_based_.28DEM.29_data_sets_for_elevation >>> >>> >>> Regarding using latitude/longitude coordinates, I don't know if you are >>> using them or not. I just wanted to mention this if you haven't noticed >>> this information from the GIS GE documentation :) To elaborate further, >>> provided GIS GE example web client has been implemented so that it works >>> correctly only with metric coordinate system. Using lat/long data source >>> won't work with the provided client, and that's why lat/long coordinate >>> handling needs to be implemented by yourself. But as said, I don't know if >>> you are using data source based in latitude/longitudes or metric >>> coordinates. >>> >>> >>> Best regards, >>> Sami >>> >>> On Thu, Jun 25, 2015 at 11:53 AM, Ibon Salbidegoitia < >>> ibon.salbi at gmail.com> wrote: >>> >>>> Hi Sami, >>>> >>>> I have a couple of things to ask. >>>> >>>> 1. It is great that the grayscale images for elevation is pretty >>>> much ready. Can you tell me when do you expect to finish the test and when >>>> I can be able to test it? >>>> 2. About the last paragraph, I do not understand why you tell me >>>> that lat/long is not supported. Where I have used it? Do you refer to the >>>> bounding box of the layers I have upload? So do I have to change the SRS to >>>> EPSG:25830 for example instead of EPSG:4326? >>>> >>>> Best regards, >>>> Ibon >>>> >>>> >>>> 2015-06-24 14:22 GMT+00:00 Sami J : >>>> >>>>> Hi Ibon, >>>>> ok now it's clear; in a short problem is that elevation data in >>>>> grayscale image is not yet supported by the GIS GE. >>>>> >>>>> The good thing is that implementation for it is pretty much ready, we >>>>> are doing final testing for it and then documentation will be updated. So >>>>> soon it is possible to use grayscale elevation images as for source to >>>>> elevation data, GIS GE implementation supports same data format as SRTM >>>>> data uses. GIS GE will send response data in octet-stream format, client >>>>> itself needs to create 3D objects based on the octet-stream data. >>>>> >>>>> please note that current version of the GIS GE reference web client >>>>> only supports metric coordinates, Lat/log is not working. I mention this >>>>> because if you'd like to use GIS data in Lat/Log format, the client >>>>> scenemanager logic needs to be re-implemented. >>>>> >>>>> Best regards, >>>>> Sami >>>>> >>>>> >>>>> On Wed, Jun 24, 2015 at 10:10 AM, Ibon Salbidegoitia < >>>>> ibon.salbi at gmail.com> wrote: >>>>> >>>>>> Hi Sami, >>>>>> >>>>>> I have upload the ortophoto on "fiware" workspace and also texture >>>>>> with appropriate names to be able to see them in my Client examples: >>>>>> + >>>>>> http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml >>>>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml >>>>>> >>>>>> As you will see, selecting the terrain texture, the new layer appears >>>>>> (surprisingly, the one of other workspace also). But if I try to select the >>>>>> terrain layer (first box of GIS client), you will see that the one uploaded >>>>>> with the name "ODE_test_terrain" does not appear. Maybe I didn't explain >>>>>> correctly in my previous email, but this layer is the altitude layer, the >>>>>> shape. So I suppose that the W3DS options have to be defined, but if you >>>>>> access to that layer on our testing server ( >>>>>> http://151.80.143.120:8080/geoserver . User: admin Pass: geoserver) >>>>>> you will see that I cannot access to the W3DS tab of "ODE_test_terrain" >>>>>> layer to make it "Active" and "Queryable" and maybe other options required >>>>>> on the GIS client to be able to require it as the shape of the terrain. >>>>>> >>>>>> Which could be the problem? >>>>>> >>>>>> Just one more thing. I am selected on one of the FIWARE accelerators >>>>>> (Finodex) to develop services with Fiware tools. As you imagine, this >>>>>> enabler is one that I am using. They required me to put them (fiware >>>>>> coaches of Finodex accelerator) in CC on this discussion emails to follow >>>>>> the evolution of our project. So I will put them in CC on the next email. I >>>>>> suppose there is no problem on this, is it? >>>>>> >>>>>> Best regards, >>>>>> Ibon >>>>>> >>>>>> >>>>>> 2015-06-23 8:38 GMT+02:00 Sami J : >>>>>> >>>>>>> Hi Ibon, >>>>>>> thank you for the feedback, I need to update user guide about this >>>>>>> issue. Textures are queried via geoserver's WMS-interface. This interface >>>>>>> isn't related to W3DS-module and therefore there's no need >>>>>>> to declare W3DS related options for the texture layer. So when you >>>>>>> define texture layer which you want to use as a texture for 3D terrain, it >>>>>>> is enough to define options under "Data"-tab. >>>>>>> >>>>>>> Best regards, >>>>>>> Sami >>>>>>> >>>>>>> On Mon, Jun 22, 2015 at 6:21 PM, Ibon Salbidegoitia < >>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>> >>>>>>>> Hi Sami, >>>>>>>> >>>>>>>> Thank you. Yes I knew that because I saw it in the JS code you >>>>>>>> mention. >>>>>>>> I was going to change the ortophoto and texture to workspace to >>>>>>>> "fiware" for that reason, but being honest I didn't test it because I found >>>>>>>> the error I described in my previous email. I mean, I was trying to access >>>>>>>> the texture layer W3DS tab to make it "Active" and "Queryable" as required >>>>>>>> on the wiki, so that's the reason I sent you the error, because I though >>>>>>>> that it wouldn't be possible to go ahead without changing the texture the >>>>>>>> configuration. >>>>>>>> >>>>>>>> So, if I am wrong and it is not necessary to configure the W3DS >>>>>>>> tab, I will try it. I don't need from you to change the JS code to find >>>>>>>> texture and photos of all the workspace. I will change the data to "fiware" >>>>>>>> workspae. >>>>>>>> >>>>>>>> I will tell you if everything goes well. >>>>>>>> Best regards, >>>>>>>> >>>>>>>> Ibon >>>>>>>> >>>>>>>> >>>>>>>> 2015-06-22 9:05 GMT+02:00 Sami J : >>>>>>>> >>>>>>>>> Hi Ibon, >>>>>>>>> nice to hear you have been able to progress in your work! >>>>>>>>> >>>>>>>>> Let me answer behalf Juha: Your texture data seems to be ok. In >>>>>>>>> case you are using GIS GE reference client problem with the texture loading >>>>>>>>> might be with the used workspace. GIS GE reference client assumes that all >>>>>>>>> data is in "fiware"-workspace. This applies also for the textures. So >>>>>>>>> changing texture workspace to "fiware" might solve loading problem. >>>>>>>>> >>>>>>>>> If you'd like to modify reference client to support also other >>>>>>>>> workspaces, URI for texture loading is defined in the scenemngr.js >>>>>>>>> getElements-function. You can modify URL created in there. >>>>>>>>> >>>>>>>>> Best regards, >>>>>>>>> Sami >>>>>>>>> >>>>>>>>> >>>>>>>>> On Mon, Jun 22, 2015 at 9:05 AM, Juha Hyv?rinen < >>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>> >>>>>>>>>> >>>>>>>>>> ---------- Forwarded message ---------- >>>>>>>>>> From: Ibon Salbidegoitia >>>>>>>>>> Date: Thu, Jun 18, 2015 at 11:05 AM >>>>>>>>>> Subject: Re: W3DS - FIWARE >>>>>>>>>> To: Juha Hyv?rinen >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Hi Juha, >>>>>>>>>> >>>>>>>>>> I checked that many changes where done on the data and wiki. >>>>>>>>>> Congratulations! Now everything is very clear! >>>>>>>>>> >>>>>>>>>> I write you because I have some doubts about the texture data. On >>>>>>>>>> the wiki "User and Programmers Guide" section "3.3.3 Adding texture" the >>>>>>>>>> last sentence says that one option is to store texture on a GeoTIFF. >>>>>>>>>> I used the following GeoTIFF texture (MDT) data on float32 format >>>>>>>>>> to try it. You can download it here: >>>>>>>>>> ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip >>>>>>>>>> >>>>>>>>>> The file has been uploaded to Geoserver. As it does not recognize >>>>>>>>>> the SRS, I defined whichis the EPSG:25830. >>>>>>>>>> As it says in the Unit Testing Plan, I have to go to W3DS tab to >>>>>>>>>> activate and make it queryable. >>>>>>>>>> However, it returns an error on JIRA. >>>>>>>>>> >>>>>>>>>> You can check it in our geoserver: >>>>>>>>>> http://151.80.143.120:8080/geoserver/ >>>>>>>>>> + User: admin >>>>>>>>>> + Pass: geoserver >>>>>>>>>> >>>>>>>>>> The GeoTIFF texture is defined on the layer "terrain" , on >>>>>>>>>> workspace "ODE" >>>>>>>>>> Please let me know why this option is not available. >>>>>>>>>> Best regards, >>>>>>>>>> >>>>>>>>>> Ibon >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> 2015-06-02 18:20 GMT+02:00 Ibon Salbidegoitia < >>>>>>>>>> ibon.salbi at gmail.com>: >>>>>>>>>> >>>>>>>>>>> Hi Juha, >>>>>>>>>>> >>>>>>>>>>> I have been able to run GIS Client examples: >>>>>>>>>>> + >>>>>>>>>>> http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml >>>>>>>>>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml >>>>>>>>>>> >>>>>>>>>>> As you can see in the attached pictures, there seems to be some >>>>>>>>>>> problems with space between layers and I cannot see the xml3d buildings on >>>>>>>>>>> the examples. >>>>>>>>>>> Do you know where the buildings should appear? >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Just as comment, I have found more bugs that may improve the >>>>>>>>>>> Unit Testing Plan. I list all of them below if you are interested on >>>>>>>>>>> changing them >>>>>>>>>>> >>>>>>>>>>> *On wiki*: >>>>>>>>>>> 1.2.2.4 PostGIS connection to GeoServer >>>>>>>>>>> + When Publish fiware_test_terrain PostGIS - PostGIS Database >>>>>>>>>>> In "Objects Attributes" section select "name" for the >>>>>>>>>>> "Object ID" it is not possible because only options are [elevation / geom / >>>>>>>>>>> lod]. The documentation seems to need to select "name" when it does not >>>>>>>>>>> exist. >>>>>>>>>>> >>>>>>>>>>> 1.2.3.2 terrain_texture_orto.tif and terrain_texture_raster.tif >>>>>>>>>>> >>>>>>>>>>> + Raster_map_image_for_terrain_texture/terrain_texture_raster.tif >>>>>>>>>>> SRS is automatically set to EPSG:404000. Not EPSG:3067 as >>>>>>>>>>> it is said on the wiki >>>>>>>>>>> + Aero_photo_for_terrain_texture/terrain_texture_orto.tif >>>>>>>>>>> SRS is automatically set to EPSG:3067. Not EPSG:404000 as >>>>>>>>>>> it is said on the wiki >>>>>>>>>>> >>>>>>>>>>> *On GIS Client*: >>>>>>>>>>> Version 4.3.2 >>>>>>>>>>> + The both examples () have changed the script "map.js" and >>>>>>>>>>> now it is not automatically defined "baseUrl" variable as previous version >>>>>>>>>>> 4.2.2. It will be recommended to use the code lines: >>>>>>>>>>> var ip = location.host; >>>>>>>>>>> var baseUrl = "http://"+ip+"/geoserver/"; >>>>>>>>>>> >>>>>>>>>>> *On MIWI-GISDataProvider download section*: >>>>>>>>>>> + Version 4.3.2 >>>>>>>>>>> - Test assest 4.3.2 ZIP file has a space between text and >>>>>>>>>>> version numbers -> >>>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>> - ZIP file when decompressed has a folder with a space >>>>>>>>>>> between text ("rel") and numbers ("4.3.2") -> rel\ 4.3.2 >>>>>>>>>>> - Subfolders of Test_assest "Building_coordinates /" and >>>>>>>>>>> "PostGIS_database_backup /" have a space at the end of the name. >>>>>>>>>>> + Version 4.2.2 >>>>>>>>>>> - Subfolders of Test_assest "Building_coordinates /" and >>>>>>>>>>> "PostGIS_database_backup /" have a space at the end of the name. >>>>>>>>>>> >>>>>>>>>>> Best regards, >>>>>>>>>>> >>>>>>>>>>> Ibon >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> 2015-06-02 11:59 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>> >>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>> >>>>>>>>>>>> Thank you for feedback about test asset naming problems, I >>>>>>>>>>>> wasn't aware of those and I have informed my colleague who have made those >>>>>>>>>>>> packages. He will fix those tomorrow. >>>>>>>>>>>> >>>>>>>>>>>> Building coordinates are needed if you want to use external 3D >>>>>>>>>>>> models in your application with real spatial information. For example hand >>>>>>>>>>>> made building models placed in correct position etc. If you don't need >>>>>>>>>>>> those then that step is optional. >>>>>>>>>>>> >>>>>>>>>>>> We also updated guide for database restoring and it can be >>>>>>>>>>>> found from here: >>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan#Import_PostGIS_database_backup_with_terrain_data >>>>>>>>>>>> >>>>>>>>>>>> Your problem was that username in the database backup was >>>>>>>>>>>> defined to be 'sami' and it does not exist in your system. It is fixed by >>>>>>>>>>>> ignoring username from the database backup. >>>>>>>>>>>> >>>>>>>>>>>> Before restoring that database backup you should drop >>>>>>>>>>>> fiware_test_terrain table. >>>>>>>>>>>> >>>>>>>>>>>> Let me know if this was helpful. >>>>>>>>>>>> >>>>>>>>>>>> - Juha >>>>>>>>>>>> >>>>>>>>>>>> On Tue, Jun 2, 2015 at 11:41 AM, Ibon Salbidegoitia < >>>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Sorry I send previous email without finishing the email as >>>>>>>>>>>>> error. You have below all the email. >>>>>>>>>>>>> >>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>> >>>>>>>>>>>>> Sorry for the delay, I was busy and these last 3 days I had >>>>>>>>>>>>> some problems with tomcat so I decided to format everything and start from >>>>>>>>>>>>> the beginning to know what errors are happening. >>>>>>>>>>>>> I will try to explain cronologically all the steps and >>>>>>>>>>>>> error/bugs found. >>>>>>>>>>>>> >>>>>>>>>>>>> First of all I update git repository and change to the >>>>>>>>>>>>> "fiware_rel_4.x" branch to create the WAR file with the maven command: mvn >>>>>>>>>>>>> install -DdownloadSources=true -DskipTests=true -Pw3ds >>>>>>>>>>>>> After restarting tomcat, the geoserver seems to work -> >>>>>>>>>>>>> http://151.80.143.120:8080/geoserver (User: admin / >>>>>>>>>>>>> Pass: geoserver) >>>>>>>>>>>>> I did not use the WAR published, I created my own from the new >>>>>>>>>>>>> github branch as you see. >>>>>>>>>>>>> >>>>>>>>>>>>> So then I decided to update the test unit plan. Here I have >>>>>>>>>>>>> one comment just to improve in case you want. I have checked that you >>>>>>>>>>>>> usually use "space" on folders and files which usually is no suitable. I >>>>>>>>>>>>> refer specificly to the 4.3.2 version. >>>>>>>>>>>>> + The ZIP file has a "space" on the name what requires to >>>>>>>>>>>>> use ASCI character to download: wget --no-check-certificate >>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>>>> + When ZIP is decompressed, the name of the folder has also >>>>>>>>>>>>> a "space": /home/UnitTestPlan/rel\ 4.3.2 >>>>>>>>>>>>> + PostGIS database backup has also a "space" at the >>>>>>>>>>>>> end: /home/UnitTestPlan/rel\ 4.3.2/PostGIS_database_backup\ / >>>>>>>>>>>>> >>>>>>>>>>>>> Any way, I continue with the database restore. On the PostGIS >>>>>>>>>>>>> database backup, I checked on the 4.3.2 version that there are 2 >>>>>>>>>>>>> files: building_coordinates and test_asset-terrain. >>>>>>>>>>>>> The "building_coordinates" file appears to be a text format >>>>>>>>>>>>> dump. So is this file necessary to upload to database? >>>>>>>>>>>>> The "test_asset-terrain" could be uploaded to postgres with >>>>>>>>>>>>> the following command: pg_restore -d fiware_test /home/UnitTestPlan/rel\ >>>>>>>>>>>>> 4.3.2/PostGIS_database_backup\ /FIWARE-postgis-test_asset-terrain >>>>>>>>>>>>> However, I receive the following errors: >>>>>>>>>>>>> ================================================= >>>>>>>>>>>>> pg_restore: [archiver (db)] Error while PROCESSING TOC: >>>>>>>>>>>>> pg_restore: [archiver (db)] Error from TOC entry 184; 1259 >>>>>>>>>>>>> 65659 TABLE fiware_test_terrain sami >>>>>>>>>>>>> pg_restore: [archiver (db)] could not execute query: ERROR: >>>>>>>>>>>>> role "sami" does not exist >>>>>>>>>>>>> Command was: ALTER TABLE public.fiware_test_terrain OWNER TO >>>>>>>>>>>>> sami; >>>>>>>>>>>>> >>>>>>>>>>>>> pg_restore: [archiver (db)] Error from TOC entry 183; 1259 >>>>>>>>>>>>> 65657 SEQUENCE fiware_test_terrain_id_seq sami >>>>>>>>>>>>> pg_restore: [archiver (db)] could not execute query: ERROR: >>>>>>>>>>>>> role "sami" does not exist >>>>>>>>>>>>> Command was: ALTER TABLE public.fiware_test_terrain_id_seq >>>>>>>>>>>>> OWNER TO sami; >>>>>>>>>>>>> >>>>>>>>>>>>> WARNING: errors ignored on restore: 2 >>>>>>>>>>>>> ================================================= >>>>>>>>>>>>> >>>>>>>>>>>>> I checked the information stored from backup on the database >>>>>>>>>>>>> and found the following tables, which I am not sure if they are all or >>>>>>>>>>>>> there are some missing. >>>>>>>>>>>>> ================================================= >>>>>>>>>>>>> List of relations >>>>>>>>>>>>> Schema | Name | Type | Owner >>>>>>>>>>>>> --------+----------------------------+----------+---------- >>>>>>>>>>>>> public | fiware_test_terrain | table | postgres >>>>>>>>>>>>> public | fiware_test_terrain_id_seq | sequence | postgres >>>>>>>>>>>>> public | geography_columns | view | postgres >>>>>>>>>>>>> public | geometry_columns | view | postgres >>>>>>>>>>>>> public | raster_columns | view | postgres >>>>>>>>>>>>> public | raster_overviews | view | postgres >>>>>>>>>>>>> public | spatial_ref_sys | table | postgres >>>>>>>>>>>>> ================================================= >>>>>>>>>>>>> >>>>>>>>>>>>> I did not continue because it seems that there are some errors >>>>>>>>>>>>> that I should first understand and fix before continuing. >>>>>>>>>>>>> If you need something else from my side, please let me know. >>>>>>>>>>>>> And please, let me know if I have done something wrong. >>>>>>>>>>>>> Thank you. Best regards, >>>>>>>>>>>>> >>>>>>>>>>>>> Ibon >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> 2015-06-02 8:33 GMT+00:00 Ibon Salbidegoitia < >>>>>>>>>>>>> ibon.salbi at gmail.com>: >>>>>>>>>>>>> >>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Sorry for the delay, I was busy and these last 3 days I had >>>>>>>>>>>>>> some problems with tomcat so I decided to format everything and start from >>>>>>>>>>>>>> the beginning to know what errors are happening. >>>>>>>>>>>>>> I will try to explain cronologically all the steps and >>>>>>>>>>>>>> error/bugs found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> First of all I update git repository and change to the >>>>>>>>>>>>>> "fiware_rel_4.x" branch to create the WAR file with the maven command: mvn >>>>>>>>>>>>>> install -DdownloadSources=true -DskipTests=true -Pw3ds >>>>>>>>>>>>>> After restarting tomcat, the geoserver seems to work -> >>>>>>>>>>>>>> http://151.80.143.120:8080/geoserver (User: admin / >>>>>>>>>>>>>> Pass: geoserver) >>>>>>>>>>>>>> I did not use the WAR published, I created my own from the >>>>>>>>>>>>>> new github branch as you see. >>>>>>>>>>>>>> >>>>>>>>>>>>>> So then I decided to update the test unit plan. Here I have >>>>>>>>>>>>>> one comment just to improve in case you want. I have checked that you >>>>>>>>>>>>>> usually use "space" on folders and files which usually is no suitable. I >>>>>>>>>>>>>> refer specificly to the 4.3.2 version. >>>>>>>>>>>>>> + The ZIP file has a "space" on the name what requires to >>>>>>>>>>>>>> use ASCI character to download: wget --no-check-certificate >>>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>>>>> + When ZIP is decompressed, the name of the folder has >>>>>>>>>>>>>> also a "space": /home/UnitTestPlan/rel\ 4.3.2 >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> 2015-05-26 12:49 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> That problem should now be fixed, code is in the github ( >>>>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver/tree/fiware_rel_4.x) >>>>>>>>>>>>>>> and we have also published new war file in Fiware FusionForge ( >>>>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1643/geoserver.war >>>>>>>>>>>>>>> ). >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> We also updated test assets and reference client. Updated >>>>>>>>>>>>>>> reference client is already available from the Github and test assets will >>>>>>>>>>>>>>> be published later today or tomorrow morning to FusionForge under release >>>>>>>>>>>>>>> 4.3.2 (https://forge.fiware.org/frs/?group_id=7). >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I hope that this release will fix problems you encountered >>>>>>>>>>>>>>> earlier. Please report back did this solve those problems. Thank you for >>>>>>>>>>>>>>> submitting these bug reports. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Tue, May 26, 2015 at 9:33 AM, Juha Hyv?rinen < >>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> We have looked into that problem now for couple of days and >>>>>>>>>>>>>>>> it seems to be somehow related to Tomcat and system locale settings. We can >>>>>>>>>>>>>>>> reproduce same problem when we deploy to a Tomcat instance while with Jetty >>>>>>>>>>>>>>>> everything works just fine. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I'm working with the fix now, but there is also a >>>>>>>>>>>>>>>> workaround: deploy war package to a Jetty instance. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I will notify you once I have pushed code changes to git. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Fri, May 22, 2015 at 1:08 PM, Juha Hyv?rinen < >>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I also forgot to mention that you should move to newer >>>>>>>>>>>>>>>>> test client which we will release officially during summer, but code is >>>>>>>>>>>>>>>>> already available from the Github: >>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/Cyber-WeX >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Client code can be found from here: >>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/Cyber-WeX/tree/master/GIS/GIS_Client_xml3d >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Fri, May 22, 2015 at 12:30 PM, Juha Hyv?rinen < >>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I have to admit that I'm clueless with that terrain >>>>>>>>>>>>>>>>>> problem, since I couldn't replicate it. Everything seems to be right at the >>>>>>>>>>>>>>>>>> server side but still data is somehow corrupted when it arrives to the >>>>>>>>>>>>>>>>>> client. We have deployed that same data set without any problems to more >>>>>>>>>>>>>>>>>> than 20 different systems by many different users during our internal >>>>>>>>>>>>>>>>>> development and testing. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> There are still few points which you could try. >>>>>>>>>>>>>>>>>> 1. Install newer PostGIS version for example from Ubuntu >>>>>>>>>>>>>>>>>> repositories instead of manually build one. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> 2. Try our upcoming release of Geoserver from Github. >>>>>>>>>>>>>>>>>> This shouldn't be difficult, since you already build your own version. >>>>>>>>>>>>>>>>>> If you used git to clone code earlier, you only need to >>>>>>>>>>>>>>>>>> pull new changes from the repository and change code branch from fiware to >>>>>>>>>>>>>>>>>> fiware_rel_4.x (git pull && git checkout fiware_rel_4.x) and rebuild >>>>>>>>>>>>>>>>>> project. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Also I created database dump from building coordinates >>>>>>>>>>>>>>>>>> table and it's as an attachment. We will add it also to the assets and >>>>>>>>>>>>>>>>>> update documentation once we have little spare time to do it. Table can be >>>>>>>>>>>>>>>>>> restored with command: sudo -u postgres psql databasename < >>>>>>>>>>>>>>>>>> path/to/the/file.sql >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Before restoring that dumb, change URLs in it to point a >>>>>>>>>>>>>>>>>> place where you actually have that xml file. At the moment URL is >>>>>>>>>>>>>>>>>> http://localhost/Test_asset/Building_model/building.xml >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Thu, May 21, 2015 at 1:09 PM, Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> You are right, I forgot to edit the tomcat7 default >>>>>>>>>>>>>>>>>>> start-up configuration file. >>>>>>>>>>>>>>>>>>> Now is using openJDK. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> 2015-05-21 9:36 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Could you restart tomcat again since it still uses >>>>>>>>>>>>>>>>>>>> Oracle java 1.8. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Thu, May 21, 2015 at 10:57 AM, Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I checked that tomcat was down due to low xmx size. I >>>>>>>>>>>>>>>>>>>>> restarted and modify xmx to avoid errors. >>>>>>>>>>>>>>>>>>>>> Asnwering to your comments: >>>>>>>>>>>>>>>>>>>>> + Please let me know when you update the >>>>>>>>>>>>>>>>>>>>> documentation to check importin building coordinates >>>>>>>>>>>>>>>>>>>>> + I imported with following command of postgres: >>>>>>>>>>>>>>>>>>>>> $ su - postgres >>>>>>>>>>>>>>>>>>>>> $ createdb fiware_test >>>>>>>>>>>>>>>>>>>>> $ pg_restore -d fiware_test >>>>>>>>>>>>>>>>>>>>> ./Test_asset_3.3/PostGIS_database_backup\ /FIWARE-postgis-test_asset >>>>>>>>>>>>>>>>>>>>> Because I am using remote server I cannot use >>>>>>>>>>>>>>>>>>>>> pgadmin, but the import was correct without errors and I checked that the >>>>>>>>>>>>>>>>>>>>> data was correct. >>>>>>>>>>>>>>>>>>>>> + I am using Oracle java (1.8.0_31), so I will >>>>>>>>>>>>>>>>>>>>> change it to openJDK7 as you recommend. Now is changed to openJDK7 to >>>>>>>>>>>>>>>>>>>>> version 1.7.0_79 >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> As I said, the Geoserver is active, so you can check >>>>>>>>>>>>>>>>>>>>> on it whatever you want. >>>>>>>>>>>>>>>>>>>>> Kind regards, >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> 2015-05-21 6:56 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I was looking into those errors you reported but your >>>>>>>>>>>>>>>>>>>>>> server went down before I could figure out any final solution. Here are my >>>>>>>>>>>>>>>>>>>>>> thoughts so far. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I noticed that something have went wrong at least >>>>>>>>>>>>>>>>>>>>>> with building coordinate importing and we will update documentation how to >>>>>>>>>>>>>>>>>>>>>> import those properly. I can notice you once that is done. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I also would like to make sure that >>>>>>>>>>>>>>>>>>>>>> fiware:fiware_test_terrain is data set provided by us and you imported it >>>>>>>>>>>>>>>>>>>>>> to the database as instructed with pgAdmin? >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Third point: in the past I had some problems with >>>>>>>>>>>>>>>>>>>>>> Geoserver when we used Oracle java, so please make sure that you use >>>>>>>>>>>>>>>>>>>>>> openJDK7. You can check used Java version with commad: >>>>>>>>>>>>>>>>>>>>>> java -version >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> result should be something similar: >>>>>>>>>>>>>>>>>>>>>> ----------------- >>>>>>>>>>>>>>>>>>>>>> :~$ java -version >>>>>>>>>>>>>>>>>>>>>> java version "1.7.0_79" >>>>>>>>>>>>>>>>>>>>>> OpenJDK Runtime Environment (IcedTea 2.5.5) >>>>>>>>>>>>>>>>>>>>>> (7u79-2.5.5-0ubuntu0.14.04.2) >>>>>>>>>>>>>>>>>>>>>> OpenJDK 64-Bit Server VM (build 24.79-b02, mixed mode) >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> If not, change default java version with command: >>>>>>>>>>>>>>>>>>>>>> sudo update-alternatives --config java >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Mon, May 18, 2015 at 10:34 AM, Ibon Salbidegoitia >>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> The last couple of months I have been learning and >>>>>>>>>>>>>>>>>>>>>>> understanding all the things that we discussed 2 months ago. >>>>>>>>>>>>>>>>>>>>>>> Once I knew how to do most of the things, I tried to >>>>>>>>>>>>>>>>>>>>>>> do the "Unit Testing Plan" from the Wiki ( >>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan >>>>>>>>>>>>>>>>>>>>>>> ) >>>>>>>>>>>>>>>>>>>>>>> I have found some bugs/errors that I think they >>>>>>>>>>>>>>>>>>>>>>> should be corrected if possible: >>>>>>>>>>>>>>>>>>>>>>> + Section: 1.2.2.3 PostGIS connection to GeoServer >>>>>>>>>>>>>>>>>>>>>>> + terrain_texture_raste has a EPSG:404000 SRS (set >>>>>>>>>>>>>>>>>>>>>>> by default) >>>>>>>>>>>>>>>>>>>>>>> + terrain_texture_orto has a EPSG:3067 SRS (set by >>>>>>>>>>>>>>>>>>>>>>> default) >>>>>>>>>>>>>>>>>>>>>>> + Section: 1.2.3.2 terrain_texture_orto.tif and >>>>>>>>>>>>>>>>>>>>>>> terrain_texture_raster.tif >>>>>>>>>>>>>>>>>>>>>>> + On building_coordinates SRS is not automatically >>>>>>>>>>>>>>>>>>>>>>> assigned >>>>>>>>>>>>>>>>>>>>>>> + On building_coordinates table, when SRS EPSG:3047 >>>>>>>>>>>>>>>>>>>>>>> value is introduced manually, the "Bounding Box" values seem to be wrong >>>>>>>>>>>>>>>>>>>>>>> assigned >>>>>>>>>>>>>>>>>>>>>>> + Select Activate and Queryable in the W3DS >>>>>>>>>>>>>>>>>>>>>>> Settings, it is not clear if it is for both tables >>>>>>>>>>>>>>>>>>>>>>> + In Objects Attributes select name for the Object >>>>>>>>>>>>>>>>>>>>>>> ID. Only for building_coordinates table, because fiware_test_terrain table >>>>>>>>>>>>>>>>>>>>>>> has not got this Object ID. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I have follow everything sucessfully but at the end, >>>>>>>>>>>>>>>>>>>>>>> it is not possible to see the correct result ( >>>>>>>>>>>>>>>>>>>>>>> http://151.80.143.120/GIS/). I am not sure if it is >>>>>>>>>>>>>>>>>>>>>>> for the "building_coordinates" bounding box values or what. >>>>>>>>>>>>>>>>>>>>>>> You can check on Geoserver that everything is >>>>>>>>>>>>>>>>>>>>>>> correct (http://151.80.143.120/geoserver User: >>>>>>>>>>>>>>>>>>>>>>> admin Pass: geoserver. The server is a server to test this W3DS service >>>>>>>>>>>>>>>>>>>>>>> only, so you can use it without any problems) >>>>>>>>>>>>>>>>>>>>>>> So something seems that it is not correctly working. >>>>>>>>>>>>>>>>>>>>>>> What can it be? (All the data was correctly imported to PostGIS without >>>>>>>>>>>>>>>>>>>>>>> errors) >>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Best regards, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> 2015-03-26 7:42 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I have been out of office and didn't have time to >>>>>>>>>>>>>>>>>>>>>>>> reply earlier. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> EPSG:900913 is map projection defined by Google and >>>>>>>>>>>>>>>>>>>>>>>> it's using lat/lon coordinates. At the moment requesting data from >>>>>>>>>>>>>>>>>>>>>>>> non-metric coordinate systems will result erroneous output. Some projection >>>>>>>>>>>>>>>>>>>>>>>> tools may use that as a default projection if it's undefined. I suggest >>>>>>>>>>>>>>>>>>>>>>>> that you check your projection definitions from importing code and if you >>>>>>>>>>>>>>>>>>>>>>>> didn't set any coordinate system set one. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I also quickly checked that one tile you provided >>>>>>>>>>>>>>>>>>>>>>>> and there was a lot no-data values. You could probably get better results >>>>>>>>>>>>>>>>>>>>>>>> if you select input data from area where there are actually data to show. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Please note that only UTM coordinate systems (or >>>>>>>>>>>>>>>>>>>>>>>> similar) are supported by W3DS module. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> For visualization you can use sample client >>>>>>>>>>>>>>>>>>>>>>>> provided within FIWARE project. It is quite simple and you shouldn't have >>>>>>>>>>>>>>>>>>>>>>>> any problems to understand how it does requests to the server and visualize >>>>>>>>>>>>>>>>>>>>>>>> received 3D data. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> On Wed, Mar 18, 2015 at 10:11 AM, Ibon >>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> I have been searching and found that my data is >>>>>>>>>>>>>>>>>>>>>>>>> in EPSG:900913 and now the layer is published and I can see it. >>>>>>>>>>>>>>>>>>>>>>>>> Is this the correct way to publish it? >>>>>>>>>>>>>>>>>>>>>>>>> So now, I am supposed to use the 3D capabilities >>>>>>>>>>>>>>>>>>>>>>>>> to visualize in 3D. I have checked the XML3D link that you sent me but I >>>>>>>>>>>>>>>>>>>>>>>>> don't understand how I have to apply to visualize the layer in 3D. >>>>>>>>>>>>>>>>>>>>>>>>> Can you please be more specific or give me some >>>>>>>>>>>>>>>>>>>>>>>>> help? >>>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-18 7:13 GMT+00:00 Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com>: >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> I have been able to introduce the XYZ files >>>>>>>>>>>>>>>>>>>>>>>>>> (*.asc in my case) to the Postgre database with the PostGIS extension. >>>>>>>>>>>>>>>>>>>>>>>>>> I am able to see the layer from the Geoserver but >>>>>>>>>>>>>>>>>>>>>>>>>> I have some doubts about the data to be introduced that I don't know how to >>>>>>>>>>>>>>>>>>>>>>>>>> fill when Geoserver asks for publishing the layer. >>>>>>>>>>>>>>>>>>>>>>>>>> I have followed the following command lines to >>>>>>>>>>>>>>>>>>>>>>>>>> introduce the data to database which I will appreciate if you can tell me >>>>>>>>>>>>>>>>>>>>>>>>>> if they are correct. And also, I would like to know how can I publish the >>>>>>>>>>>>>>>>>>>>>>>>>> layer because the link that you send me doesn't give me enough information >>>>>>>>>>>>>>>>>>>>>>>>>> to be able for that. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> ============================================================================================================== >>>>>>>>>>>>>>>>>>>>>>>>>> ===== Download the XYZ data as *.asc file ===== >>>>>>>>>>>>>>>>>>>>>>>>>> $ mkdir /root/data >>>>>>>>>>>>>>>>>>>>>>>>>> $ cd /root/data >>>>>>>>>>>>>>>>>>>>>>>>>> $ wget >>>>>>>>>>>>>>>>>>>>>>>>>> ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT/H0037/mdt_037_1_8.zip >>>>>>>>>>>>>>>>>>>>>>>>>> $ unzip mdt_037_1_8.zip >>>>>>>>>>>>>>>>>>>>>>>>>> $ gdal_polygonize.py -f "ESRI Shapefile" >>>>>>>>>>>>>>>>>>>>>>>>>> mdt_037_1_8.asc mdt_037_1_8.shp >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> ===== Create database on Postgre as postgres user >>>>>>>>>>>>>>>>>>>>>>>>>> ===== >>>>>>>>>>>>>>>>>>>>>>>>>> $ su - postgres >>>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres -d postgres >>>>>>>>>>>>>>>>>>>>>>>>>> $ create database [yourdatabase]; >>>>>>>>>>>>>>>>>>>>>>>>>> -> CREATE DATABASE >>>>>>>>>>>>>>>>>>>>>>>>>> $ \list >>>>>>>>>>>>>>>>>>>>>>>>>> $ \q >>>>>>>>>>>>>>>>>>>>>>>>>> $ psql -d [yourdatabase] -c "CREATE EXTENSION >>>>>>>>>>>>>>>>>>>>>>>>>> postgis;" >>>>>>>>>>>>>>>>>>>>>>>>>> -> CREATE EXTENSION >>>>>>>>>>>>>>>>>>>>>>>>>> $ exit >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> ===== Define Postgre password ===== >>>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres >>>>>>>>>>>>>>>>>>>>>>>>>> $ \password postgres >>>>>>>>>>>>>>>>>>>>>>>>>> $ \q >>>>>>>>>>>>>>>>>>>>>>>>>> $ exit >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> ===== Import data with "shp2pgsql" utility of >>>>>>>>>>>>>>>>>>>>>>>>>> postgis ( >>>>>>>>>>>>>>>>>>>>>>>>>> http://www.bostongis.com/pgsql2shp_shp2pgsql_quickguide.bqg) >>>>>>>>>>>>>>>>>>>>>>>>>> ===== >>>>>>>>>>>>>>>>>>>>>>>>>> $ /root/postgis-2.1.0/loader/shp2pgsql >>>>>>>>>>>>>>>>>>>>>>>>>> /root/data/mdt_037_1_8.shp >sql >>>>>>>>>>>>>>>>>>>>>>>>>> -> Shapefile type: Polygon >>>>>>>>>>>>>>>>>>>>>>>>>> -> Postgis type: MULTIPOLYGON[2] >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> ===== Import created sql to postgre ===== >>>>>>>>>>>>>>>>>>>>>>>>>> $ mv sql /var/lib/postgresql/ >>>>>>>>>>>>>>>>>>>>>>>>>> $ chmod 777 /var/lib/postgresql/sql >>>>>>>>>>>>>>>>>>>>>>>>>> $ su - postgres >>>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres -d [yourdatabase] -f sql >>>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres -d [yourdatabase] -c "\d" >>>>>>>>>>>>>>>>>>>>>>>>>> -> List of relations >>>>>>>>>>>>>>>>>>>>>>>>>> -> Schema | Name | Type | >>>>>>>>>>>>>>>>>>>>>>>>>> Owner >>>>>>>>>>>>>>>>>>>>>>>>>> -> >>>>>>>>>>>>>>>>>>>>>>>>>> --------+---------------------+----------+---------- >>>>>>>>>>>>>>>>>>>>>>>>>> -> public | geography_columns | view | >>>>>>>>>>>>>>>>>>>>>>>>>> postgres >>>>>>>>>>>>>>>>>>>>>>>>>> -> public | geometry_columns | view | >>>>>>>>>>>>>>>>>>>>>>>>>> postgres >>>>>>>>>>>>>>>>>>>>>>>>>> -> public | mdt_037_1_8 | table | >>>>>>>>>>>>>>>>>>>>>>>>>> postgres >>>>>>>>>>>>>>>>>>>>>>>>>> -> public | mdt_037_1_8_gid_seq | sequence | >>>>>>>>>>>>>>>>>>>>>>>>>> postgres >>>>>>>>>>>>>>>>>>>>>>>>>> -> ... >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> $ exit >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> ===== Add new workspace ===== >>>>>>>>>>>>>>>>>>>>>>>>>> + Name: Fiware >>>>>>>>>>>>>>>>>>>>>>>>>> + URI of name space: com.fiware >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> ===== Add new "Data store" on Geoserver ( >>>>>>>>>>>>>>>>>>>>>>>>>> http://151.80.143.120:8080/geoserver) ===== >>>>>>>>>>>>>>>>>>>>>>>>>> + Select the "PostGIS - PostGIS Database" >>>>>>>>>>>>>>>>>>>>>>>>>> vectorial data >>>>>>>>>>>>>>>>>>>>>>>>>> + Add data required: >>>>>>>>>>>>>>>>>>>>>>>>>> + Workspace: Fiware >>>>>>>>>>>>>>>>>>>>>>>>>> + Name of origin data: Fiware_Test1 >>>>>>>>>>>>>>>>>>>>>>>>>> + database: fiwaretest1 >>>>>>>>>>>>>>>>>>>>>>>>>> + host: localhost >>>>>>>>>>>>>>>>>>>>>>>>>> + port: 5432 >>>>>>>>>>>>>>>>>>>>>>>>>> + user: postgres >>>>>>>>>>>>>>>>>>>>>>>>>> + pass: postgres >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> ===== Add new layer and make public ===== >>>>>>>>>>>>>>>>>>>>>>>>>> + Edit layer features??? >>>>>>>>>>>>>>>>>>>>>>>>>> + SRS? >>>>>>>>>>>>>>>>>>>>>>>>>> + ... >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> ============================================================================================================== >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-03 13:42 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Yes, write all polygons to a single shp file or >>>>>>>>>>>>>>>>>>>>>>>>>>> to a single table inside a database and you are good to go. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> I would recommend that you also study some >>>>>>>>>>>>>>>>>>>>>>>>>>> basics about rendering engines and search general knowledge what data 3D >>>>>>>>>>>>>>>>>>>>>>>>>>> models really keeps inside them. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> In FIWARE we use XML3D as a rendering engine and >>>>>>>>>>>>>>>>>>>>>>>>>>> all 3D models produced by GeoServer are in XML3D format. >>>>>>>>>>>>>>>>>>>>>>>>>>> Here is one guide how to use XML3D rendering >>>>>>>>>>>>>>>>>>>>>>>>>>> engine: >>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/xml3d/xml3d.js/wiki/The-Basics-of-XML3D >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Mar 3, 2015 at 2:53 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for your clarifications. >>>>>>>>>>>>>>>>>>>>>>>>>>>> I have some doubts about your comments. >>>>>>>>>>>>>>>>>>>>>>>>>>>> I understand how do I have to create the >>>>>>>>>>>>>>>>>>>>>>>>>>>> polygons. I have done a python script with the for loops as you said >>>>>>>>>>>>>>>>>>>>>>>>>>>> (attached) which creates the POLIGONZs. >>>>>>>>>>>>>>>>>>>>>>>>>>>> I have done a SHP file for each polygon, but >>>>>>>>>>>>>>>>>>>>>>>>>>>> should I do a single SHP with all the polygons? I suppose that I should do >>>>>>>>>>>>>>>>>>>>>>>>>>>> a single SHP because I can have many polygons if the resolution is too >>>>>>>>>>>>>>>>>>>>>>>>>>>> high. Or this is not possible? >>>>>>>>>>>>>>>>>>>>>>>>>>>> The procedure of writting data to database with psycopg2 >>>>>>>>>>>>>>>>>>>>>>>>>>>> is similar, so the same question, all polygons together is it possible? >>>>>>>>>>>>>>>>>>>>>>>>>>>> Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-03 11:35 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have just updated User and Programmers >>>>>>>>>>>>>>>>>>>>>>>>>>>>> guide. I hope that these tips helps you forward. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Added content: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Data generation from *.xyz file format >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Here is a small sample from source dataset: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Easting Northing Elevation >>>>>>>>>>>>>>>>>>>>>>>>>>>>> --------------------------------- >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398000.000 7542000.000 279.950 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7542000.000 279.388 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7542000.000 278.818 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398000.000 7541990.000 281.002 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541990.000 280.436 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7541990.000 279.847 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398000.000 7541980.000 282.096 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541980.000 281.539 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7541980.000 280.944 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> That data produces following 2D grid: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 2 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 | 398000.000 7542000.000 279.950 | >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7542000.000 279.388 | 398020.000 7542000.000 278.818 | >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 | 398000.000 7541990.000 281.002 | >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541990.000 280.436 | 398020.000 7541990.000 279.847 | >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 | 398000.000 7541980.000 282.096 | >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541980.000 281.539 | 398020.000 7541980.000 280.944 | >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> From that grid we can create polygons >>>>>>>>>>>>>>>>>>>>>>>>>>>>> representing terrain surface. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> WKT polygons generated from that dataset >>>>>>>>>>>>>>>>>>>>>>>>>>>>> should look like this: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398000.000 7542000.000 279.950, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7542000.000 279.388, 398010.000 7541990.000 280.436, 398000.000 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541990.000 281.002, 398000.000 7542000.000 279.950)) >>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398010.000 7542000.000 279.388, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7542000.000 278.818, 398020.000 7541990.000 279.847, 398010.000 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541990.000 280.436, 398010.000 7542000.000 279.388)) >>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398000.000 7541990.000 281.002, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541990.000 280.436, 398010.000 7541980.000 281.539, 398000.000 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541980.000 282.096, 398000.000 7541990.000 281.002)) >>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398010.000 7541990.000 280.436, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7541990.000 279.847, 398020.000 7541980.000 280.944, 398010.000 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541980.000 281.539, 398010.000 7541990.000 280.436)) >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> NOTE: It is said in WKT specification that >>>>>>>>>>>>>>>>>>>>>>>>>>>>> polygons needs to be closed, meaning that start and end points are the same. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Each polygon should be written into a PostGIS >>>>>>>>>>>>>>>>>>>>>>>>>>>>> database or into a shape file. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Shapefile writing can be done for example >>>>>>>>>>>>>>>>>>>>>>>>>>>>> with python library called pyshp ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/GeospatialPython/pyshp). >>>>>>>>>>>>>>>>>>>>>>>>>>>>> - PostGIS can be used for example with >>>>>>>>>>>>>>>>>>>>>>>>>>>>> psycopg2 library (http://initd.org/psycopg/). >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Depending on selected storage format choose >>>>>>>>>>>>>>>>>>>>>>>>>>>>> corresponding publishing steps for data publishing into a W3DS layer with >>>>>>>>>>>>>>>>>>>>>>>>>>>>> GeoServer. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Official GeoServer guide how to publish a >>>>>>>>>>>>>>>>>>>>>>>>>>>>> shapefile: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/stable/en/user/gettingstarted/shapefile-quickstart/index.html >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Official GeoServer guide how to publish a >>>>>>>>>>>>>>>>>>>>>>>>>>>>> PostGIS table: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/stable/en/user/gettingstarted/postgis-quickstart/index.html >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Adding texture >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Raster data (f.ex. ortophotos) is used as >>>>>>>>>>>>>>>>>>>>>>>>>>>>> terrain texture and guide how to work with rasters can be found from here: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/stable/en/user/data/raster/index.html >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Mar 2, 2015 at 6:23 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for the steps. However, I would >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> like to clarify some things to have clear what I should do. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Imagine I have the data: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> lat lon alt >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 0 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 1 5 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 2 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 0 5 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 1 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 2 15 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 0 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 1 15 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 2 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This is like a flat surface. So I have to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> create a 2D array like: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 10 15 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 5 10 15 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 5 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have never create wkt polygons in 3D, but >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> as I have seen in some websites, this could be done like this? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGON ((0 0 0, 0 1 5, 1 1 10, 1 0 5), (0 1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 5, 0 2 10, 1 1 10, 1 2 15), (1 0 5, 2 0 10, 1 1 10, 2 1 15), (1 1 10, 1 2 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 15, 2 1 15, 2 2 20)) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> After this, I am not sure how to upload to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> DDBB in shp because I have many files. Also, I don't know how to associate >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the ortophoto to the shapes. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Being honest, I am a little bit lost and I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> would appreciate if you can help me. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-02 7:38 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm sorry to hear that you still have those >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> problems. I'm looking into that and I will report back to you if I'm able >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to reproduce and solve it in some environment. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> At the moment you can't use .tiff file >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> format. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Since XML3D, which we use as a rendering >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> engine, requires that rendered models consist of polygons we had to create >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> polygonal terrain from .asc point grid. In order to reduce processor loads >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> we decided that data should be stored as polygons. In that way data can be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> returned to a client without any further processing. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> We have developed proprietary importing >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> tools to support our business cases and therefore I can't provide those >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> directly to you but I can describe what we did. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Our workflow from .asc files included three >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> steps: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1. Read asc file and create 2D array from it >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> where each cell is a point from asc file >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2. Inside a for loop select four points from >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> array and create wkt polygon from those points >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 3. Write just created polygon to a database >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> or to a shp file >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> When polygons are stored in a database you >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> need to publish that table in GeoServer as a layer and configure it to use >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> W3DS module. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I hope that this clarifies needed steps from >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> source data to a production use. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Fri, Feb 27, 2015 at 8:04 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I continue trying to find my problem but I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> haven't advance :( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anyway, I don't write for that. I am trying >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to upload xyz format data and some ortophotos to display them with W3DS. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have the data in *.asc files and I have a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> TIF file with all of them merged. As the documentation ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> says that the *.shp, .dbf* and *.shx* >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> files are mandatory, I should convert all >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *.asc* to these formats? I cannot use* >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .tif*? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> As the documentation syas, I have to upload >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> this files to the server and I suppose that the ortophotos also. However, I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> don't know how to display them afterwards. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Can you explain me? I am in a Fiware >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> European project and as you are the support of Fiware I hope you can help >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> me. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Best regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-24 11:58 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have no glue why it's not loading since >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> personally I haven't ever used that module. You should read GeoServer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> startup logs and check if there are some fatal errors in service loading. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Logs should have something similar lines >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to these: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'wfs', enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'wms', enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'wcs', enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'w3ds', enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Check errors near those. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> There is also GeoServer users mail list >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and you probably could get more helpful response from there, since I'm not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> expert in that area. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Feb 24, 2015 at 1:13 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for the comments. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> About the "Importer extension" I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> downloaded the core extension for version 2.6.0 as you said because I show >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that was the version when I install it. So, can you guess the reason of the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> extension for not working. As you explained, W3DS is an isolated module, so >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> it has no sense for not working. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-24 11:08 GMT+00:00 Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> : >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Changes delivered to FIWARE are isolated >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> only to W3DS module and those are written on top of the GeoServer version >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2.6.0. Therefore you need to use extensions written for that specific >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> version. We will move to next stable version 2.7 when it is released later >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> this spring. Currently 2.7 release is in RC1 state. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Our changes are also in the official >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> GeoServer master and 2.7 branches and you could actually try to build >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> either of those and see if build problem still exists. Meanwhile I try to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> replicate your problem in a virtual machine since everything worked well in >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> every physical machines I have access to. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Feb 24, 2015 at 11:13 AM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I continue having a failure message in >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the same test. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have continued looking to the builded >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> version (without tests as I said) and I was trying to use the "Importer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> extension" installed by copying some source from this link: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/latest/en/user/extensions/importer/installing.html >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I copied the files to the folder >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ".../geoserver/src/web/app/target/geoserver/WEB-INF/lib" as it says and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> restart Geoserver, but the extension does not seems to load. Could be due >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to the Geoserver version done for fiware? Or, how could I solve the problem? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-23 11:55 GMT+00:00 Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Only difference between our work >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chains that I was able to find is that I use also clean statement in mvn >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> build command. Could you try that? If it's still not working I try to find >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> some time to reproduce problem in a clean machine. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> mvn clean install >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -DdownloadSources=true -DskipTests=false -Pw3ds >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Resulting following summary: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Reactor Summary: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................................. SUCCESS [2.088s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Core Platform Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .................................. SUCCESS [9.062s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Open Web Service Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [5.411s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Main Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................... SUCCESS [1:58.712s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Security Modules >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................ SUCCESS [0.043s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer JDBC Security Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................ SUCCESS [18.349s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer LDAP Security Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................ SUCCESS [35.825s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................... SUCCESS [1.450s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service 1.0 Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....................... SUCCESS [18.896s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service 1.1 Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....................... SUCCESS [19.249s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service 2.0 Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....................... SUCCESS [46.273s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Feature Service Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................ SUCCESS [1:21.581s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Map Service Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................ SUCCESS [1:27.636s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] KML support for GeoServer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................. SUCCESS [24.646s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoWebCache (GWC) Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .............................. SUCCESS [55.551s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] REST Support Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................... SUCCESS [10.524s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] REST Configuration Service >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Module ..................... SUCCESS [54.318s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Web Modules >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................. SUCCESS [0.028s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Core UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................ SUCCESS [46.005s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] WMS UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [17.764s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GWC UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [23.123s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] WFS UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [10.234s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Demoes Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [16.390s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] WCS UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [12.849s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI Modules >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................... SUCCESS [0.037s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI Core Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [1:14.168s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI JDBC Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [50.839s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI LDAP Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [27.079s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] REST UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................ SUCCESS [10.953s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Community Space >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....................................... SUCCESS [0.027s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web 3D Service >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................ SUCCESS [4.663s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Web Application >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................. SUCCESS [3.207s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Extensions >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .................................. SUCCESS [0.083s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] BUILD SUCCESSFUL >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Total time: 14 minutes 49 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> seconds >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Finished at: Mon Feb 23 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 13:26:42 EET 2015 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Final Memory: 187M/1400M >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Feb 23, 2015 at 12:33 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I followed the installation guide of >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Fiware for installation. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I used a Ubuntu 14.04 Server 64 bits >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with 4 cores, 8GB RAM and 100GB of HD. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The version of JDK (openjdk-7-jdk) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> is 7u51-2.4.6-1ubuntu4, and postgis 2.1.0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The source that I downloaded is the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> one you shared from git (git clone -b fiware >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver.git >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I followed all the commands so that's >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the reason from asking. I would appreciate if you can tell me what can be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> different. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-20 13:03 GMT+00:00 Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> without knowledge about your build >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> system (used java version, used operating system etc.) and where you >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> downloaded sources I'm not able to help you with this problem. I just >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> tested version which we have delivered to FIWARE ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver/tree/fiware) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and at least it build without any errors in any test cases. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Also, CatalogBuilder is bit out of >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> my knowledge scope. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Fri, Feb 20, 2015 at 1:18 PM, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Sorry, I forget to attach the log. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-20 11:17 GMT+00:00 Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have one comment about the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> installation. Previously when I installed the geoserver I didn't notice >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> because I was building without tests. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> But I was building geoserver with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> test where I found a failure on: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> testSingleBandedCoverage(org.geoserver.catalog.impl.CatalogBuilderTest) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I attached the log of the output >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> for your information. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> How can I solve this problem? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-05 7:48 GMT+00:00 Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for the reply. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have a xyz format data also so >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I will try to test what you sent me and look for the Unit Testing Plan link >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you sent. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If I have any doubt or problem I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> will come back to you. Thank you. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-05 7:27 GMT+01:00 Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Data publishing is well >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> documented in GeoServer user manual: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/2.5.x/en/user/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Data which we used in our >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> development was from National >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Land Survey of Finland. Source >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> data was in *-xyz*-format, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> which contains elevation data with spatial information. With this source >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> information it is possible to generate shapefile consisting polygon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> structure with elevation data. 2D presentation of the converted shapefile >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with elevation points is flat grid, in 3D presentation each grid points are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> in same elevation level as in the real world. Therefore this grid with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> elevation data can be used as source for terrain presentation. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You can also read user guide >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You can find guide for setting >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> up test setup from here: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ---------- Forwarded message >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ---------- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> From: Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Date: Wed, Feb 4, 2015 at 12:35 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> AM >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Subject: W3DS - FIWARE >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> To: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> miika.santala at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Dear Miika, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I am Ibon from Spain. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I write to you because I am >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> involved in the FIWARE European project. This project promote a GIS data >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> provider with the W3DS for 3D visualization as the one you show on the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> following link: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://130.206.81.238:8080/gis_test_client/index.xhtml >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I contact you because a have >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> been in contact with Jorge Gustavo, who made a similar use of W3DS >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.sigte.udg.edu/jornadassiglibre2012/uploads/presentaciones_12/p43.pdf) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and he told me that W3DS is now supported by you. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have followed the instructions >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of FIWARE wiki ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Installation_and_Administration_Guide) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to start using the service and everything seems to work perfectly with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Jetty. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> However, I would like to know >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> how I have to store GIS data >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with 3D information straight to GeoServer. Is there any documentation of >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> how to upload this kind of information? Can you share with me any >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> documentation about it? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Yours >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sincerely, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> material are confidential and may contain legally privileged information. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you are not the intended recipient, please contact the sender and delete >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the e-mail from your system without producing, distributing or retaining >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> copies thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> material are confidential and may contain legally privileged information. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you are not the intended recipient, please contact the sender and delete >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the e-mail from your system without producing, distributing or retaining >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> copies thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> are confidential and may contain legally privileged information. If you are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> are confidential and may contain legally privileged information. If you are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are confidential >>>>>>>>>>>>>>>>>>>> and may contain legally privileged information. If you are not the intended >>>>>>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> This e-mail and all attached material are confidential >>>>>>>>>>>>>>>>>> and may contain legally privileged information. If you are not the intended >>>>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> This e-mail and all attached material are confidential and >>>>>>>>>>>>>>>>> may contain legally privileged information. If you are not the intended >>>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> ... >> >> [Mensaje recortado] > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From pvitale at eng.it Tue Jul 14 08:50:21 2015 From: pvitale at eng.it (Pasquale Vitale) Date: Tue, 14 Jul 2015 08:50:21 +0200 Subject: [Fiware-finodex-coaching] Problems with COSMOS In-Reply-To: References: Message-ID: <55A4B12D.6020802@eng.it> Hi Miguel, please send an email to Francisco (francisco.romerobueno @telefonica.com) Regards, Pasquale Il 13/07/2015 11:53, MAPT Talkykar ha scritto: > We are having troubles with COSMOS. We have no permissions to do > actions through SSH in our directory. For example: > > hadoop fs -cat /user/antonio.gonzalez/ > > Thanks in advance > > -- > > > > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching -------------- next part -------------- An HTML attachment was scrubbed... URL: From pvitale at eng.it Tue Jul 14 08:56:13 2015 From: pvitale at eng.it (Pasquale Vitale) Date: Tue, 14 Jul 2015 08:56:13 +0200 Subject: [Fiware-finodex-coaching] W3DS - FIWARE In-Reply-To: References: Message-ID: <55A4B28D.6010903@eng.it> Hi Ibon, please try with contact at cyberlightning.com Let me know regards, Pasquale Il 13/07/2015 13:16, Ibon Salbidegoitia ha scritto: > Hi Juha, > > I have seen from an automatic reply email that Sami is going to be on > holidays till 31st of July. Is there any other technical support who > can give me feedback about the Fiware Enabler developed by Cyberlightning? > Best regards, > > Ibon > > > 2015-07-13 11:10 GMT+00:00 Ibon Salbidegoitia >: > > Hi Sami, > > I haven't received reply for the issue I told you in my previous > email. > Can you please confirm me that you received? If so, can you tell > me the situation? > Should I put Juha in Cc for all this process? > Thank you in advance. Best regards, > > Ibon > > > 2015-07-01 17:20 GMT+00:00 Ibon Salbidegoitia > >: > > Hi Sami, > > First of all, as I mentioned in a previous email, I have put > in Cc our Fiware Accelerator (Finodex) coaches as they > requested in a meeting with them to follow the situation of > each project that they are supporting. > > About your previous email, the last release is working! I have > test it in our test server (http://151.80.143.120/GIS_4.3.3/) > and the DEM works with the data provided as test. > I have checked that the test requires the textures to have > "texture" on their names and "DEM" for terrain DEM. I have > upload my data to test it but I have the following problems: > > 1. When I preview your DEM (DEM_geotiff_terrain_EPSG3067) I > can see on geoserver a grayscale image on openlayers > (openlayers example > ). > > I have seen that the tiff is a float32 image in grayscale > with a 281.604 minimum value and 792.834 maximum value . > > I have upload a similar DEM called "DEM_ODE_terrain" that > it can be selected from the DEM GIS Client example (on > previous link). This image is also float32 tiff with a > minimum value of -3.40282e+38 and maximum of 1545.84, > where minimum value is a NoData value as it is shown with > gdalinfo command: NoData Value=-3.4028234663852886e+38 > The TIF image I use it can be found here: > ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip > The geodesic system of this TIF is ETRS89 that correponds > to SRS EPSG:25830. However the preview seems to be a 0-1 > grayscale image as you can see here > (takes > some seconds as it is big). This could be due to the > NoData values that make range so big not taking into > account that the data does not exist. This is correct? > > 2. The Terrain texture also has been uploaded to Geoserver as > can be seen here > . > The DEM testing client gives the oportunity to select both > layers mentioned (for terrain DEM + terrain texture), > however nothing appears, only one small gray square > looking upwards (on zenith) with the camera on the client > as the altitudes are higher than the ones from the examples. > > So everything from test seems to work correctly, but when I > introduce my data, the DEM test client does not seem to work. > Could it be due to NoData values? Anyway, why the ortophoto > inserted is shown as gray layer? > > Best regards, > Ibon > > > 2015-06-30 11:33 GMT+00:00 Sami J > >: > > Hi Ibon, > sorry about late response. We have now made new release > from both server and example client, these can be found > from the forge under *MIWI-GISDataProvider 4.3.3*-release: > https://forge.fiware.org/frs/?group_id=7 > source code has been uploaded also to the github. > > Short documentation related using DEM images can be found > from: > http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide#World_Wind_Format_Module > > Installation document covers how to upload DEM image to > geoserver: > http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Installation_and_Administration_Guide#GeoTIFF_based_.28DEM.29_data_sets_for_elevation > > > Regarding using latitude/longitude coordinates, I don't > know if you are using them or not. I just wanted to > mention this if you haven't noticed this information from > the GIS GE documentation :) To elaborate further, provided > GIS GE example web client has been implemented so that it > works correctly only with metric coordinate system. Using > lat/long data source won't work with the provided client, > and that's why lat/long coordinate handling needs to be > implemented by yourself. But as said, I don't know if you > are using data source based in latitude/longitudes or > metric coordinates. > > > Best regards, > Sami > > On Thu, Jun 25, 2015 at 11:53 AM, Ibon Salbidegoitia > > wrote: > > Hi Sami, > > I have a couple of things to ask. > > 1. It is great that the grayscale images for > elevation is pretty much ready. Can you tell me > when do you expect to finish the test and when I > can be able to test it? > 2. About the last paragraph, I do not understand why > you tell me that lat/long is not supported. Where > I have used it? Do you refer to the bounding box > of the layers I have upload? So do I have to > change the SRS to EPSG:25830 for example instead > of EPSG:4326? > > Best regards, > Ibon > > > 2015-06-24 14:22 GMT+00:00 Sami J > >: > > Hi Ibon, > ok now it's clear; in a short problem is that > elevation data in grayscale image is not yet > supported by the GIS GE. > > The good thing is that implementation for it is > pretty much ready, we are doing final testing for > it and then documentation will be updated. So soon > it is possible to use grayscale elevation images > as for source to elevation data, GIS GE > implementation supports same data format as SRTM > data uses. GIS GE will send response data in > octet-stream format, client itself needs to create > 3D objects based on the octet-stream data. > > please note that current version of the GIS GE > reference web client only supports metric > coordinates, Lat/log is not working. I mention > this because if you'd like to use GIS data in > Lat/Log format, the client scenemanager logic > needs to be re-implemented. > > Best regards, > Sami > > > On Wed, Jun 24, 2015 at 10:10 AM, Ibon > Salbidegoitia > wrote: > > Hi Sami, > > I have upload the ortophoto on "fiware" > workspace and also texture with appropriate > names to be able to see them in my Client > examples: > + > http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml > + > http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml > > As you will see, selecting the terrain > texture, the new layer appears (surprisingly, > the one of other workspace also). But if I try > to select the terrain layer (first box of GIS > client), you will see that the one uploaded > with the name "ODE_test_terrain" does not > appear. Maybe I didn't explain correctly in my > previous email, but this layer is the altitude > layer, the shape. So I suppose that the W3DS > options have to be defined, but if you access > to that layer on our testing server > (http://151.80.143.120:8080/geoserver . User: > admin Pass: geoserver) you will see that I > cannot access to the W3DS tab of > "ODE_test_terrain" layer to make it "Active" > and "Queryable" and maybe other options > required on the GIS client to be able to > require it as the shape of the terrain. > > Which could be the problem? > > Just one more thing. I am selected on one of > the FIWARE accelerators (Finodex) to develop > services with Fiware tools. As you imagine, > this enabler is one that I am using. They > required me to put them (fiware coaches of > Finodex accelerator) in CC on this discussion > emails to follow the evolution of our project. > So I will put them in CC on the next email. I > suppose there is no problem on this, is it? > > Best regards, > Ibon > > > 2015-06-23 8:38 GMT+02:00 Sami J > >: > > Hi Ibon, > thank you for the feedback, I need to > update user guide about this issue. > Textures are queried via geoserver's > WMS-interface. This interface isn't > related to W3DS-module and therefore > there's no need to declare W3DS related > options for the texture layer. So when you > define texture layer which you want to use > as a texture for 3D terrain, it is enough > to define options under "Data"-tab. > > Best regards, > Sami > > On Mon, Jun 22, 2015 at 6:21 PM, Ibon > Salbidegoitia > wrote: > > Hi Sami, > > Thank you. Yes I knew that because I > saw it in the JS code you mention. > I was going to change the ortophoto > and texture to workspace to "fiware" > for that reason, but being honest I > didn't test it because I found the > error I described in my previous > email. I mean, I was trying to access > the texture layer W3DS tab to make it > "Active" and "Queryable" as required > on the wiki, so that's the reason I > sent you the error, because I though > that it wouldn't be possible to go > ahead without changing the texture the > configuration. > > So, if I am wrong and it is not > necessary to configure the W3DS tab, I > will try it. I don't need from you to > change the JS code to find texture and > photos of all the workspace. I will > change the data to "fiware" workspae. > > I will tell you if everything goes well. > Best regards, > > Ibon > > > 2015-06-22 9:05 GMT+02:00 Sami J > >: > > Hi Ibon, > nice to hear you have been able to > progress in your work! > > Let me answer behalf Juha: Your > texture data seems to be ok. In > case you are using GIS GE > reference client problem with the > texture loading might be with the > used workspace. GIS GE reference > client assumes that all data is in > "fiware"-workspace. This applies > also for the textures. So changing > texture workspace to "fiware" > might solve loading problem. > > If you'd like to modify reference > client to support also other > workspaces, URI for texture > loading is defined in the > scenemngr.js getElements-function. > You can modify URL created in there. > > Best regards, > Sami > > > On Mon, Jun 22, 2015 at 9:05 AM, > Juha Hyv?rinen > > > wrote: > > > ---------- Forwarded message > ---------- > From: *Ibon Salbidegoitia* > > > Date: Thu, Jun 18, 2015 at > 11:05 AM > Subject: Re: W3DS - FIWARE > To: Juha Hyv?rinen > > > > > Hi Juha, > > I checked that many changes > where done on the data and > wiki. Congratulations! Now > everything is very clear! > > I write you because I have > some doubts about the texture > data. On the wiki "User and > Programmers Guide" section > "3.3.3 Adding texture" the > last sentence says that one > option is to store texture on > a GeoTIFF. > I used the following GeoTIFF > texture (MDT) data on float32 > format to try it. You can > download it here: > ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip > > The file has been uploaded to > Geoserver. As it does not > recognize the SRS, I defined > whichis the EPSG:25830. > As it says in the Unit Testing > Plan, I have to go to W3DS tab > to activate and make it queryable. > However, it returns an error > on JIRA. > > You can check it in our geoserver: > http://151.80.143.120:8080/geoserver/ > + User: admin > + Pass: geoserver > > The GeoTIFF texture is defined > on the layer "terrain" , on > workspace "ODE" > Please let me know why this > option is not available. > Best regards, > > Ibon > > > 2015-06-02 18:20 GMT+02:00 > Ibon Salbidegoitia > >: > > Hi Juha, > > I have been able to run > GIS Client examples: > + > http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml > + > http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml > > As you can see in the > attached pictures, there > seems to be some problems > with space between layers > and I cannot see the xml3d > buildings on the examples. > Do you know where the > buildings should appear? > > > Just as comment, I have > found more bugs that may > improve the Unit Testing > Plan. I list all of them > below if you are > interested on changing them > > *On wiki*: > 1.2.2.4 PostGIS connection > to GeoServer > + When Publish > fiware_test_terrain PostGIS - > PostGIS Database > In "Objects > Attributes" section select > "name" for the "Object ID" > it is not possible because > only options are > [elevation / geom / lod]. > The documentation seems to > need to select "name" when > it does not exist. > > 1.2.3.2 > terrain_texture_orto.tif > and terrain_texture_raster.tif > + Raster_map_image_for_terrain_texture/terrain_texture_raster.tif > SRS is automatically set > toEPSG:404000. Not > EPSG:3067 as it is said on > the wiki > + Aero_photo_for_terrain_texture/terrain_texture_orto.tif > SRS is automatically set > toEPSG:3067. Not > EPSG:404000 as it is said > on the wiki > > *On GIS Client*: > Version 4.3.2 > + The both examples () > have changed the script > "map.js" and now it is not > automatically defined > "baseUrl" variable as > previous version 4.2.2. It > will be recommended to use > the code lines: > var ip = location.host; > var baseUrl = > "http://"+ip+"/geoserver/"; > > *On MIWI-GISDataProvider > download section*: > + Version 4.3.2 > - Test assest 4.3.2 ZIP > file has a space between > text and version numbers > -> > https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip > - ZIP file when > decompressed has a folder > with a space between text > ("rel") and numbers > ("4.3.2") -> rel\ 4.3.2 > - Subfolders of > Test_assest > "Building_coordinates /" > and > "PostGIS_database_backup > /" have a space at the end > of the name. > + Version 4.2.2 > - Subfolders of > Test_assest > "Building_coordinates /" > and > "PostGIS_database_backup > /" have a space at the end > of the name. > > Best regards, > > Ibon > > > 2015-06-02 11:59 GMT+00:00 > Juha Hyv?rinen > >: > > Hi Ibon, > > Thank you for feedback > about test asset > naming problems, I > wasn't aware of those > and I have informed my > colleague who have > made those packages. > He will fix those > tomorrow. > > Building coordinates > are needed if you want > to use external 3D > models in your > application with real > spatial information. > For example hand made > building models placed > in correct position > etc. If you don't need > those then that step > is optional. > > We also updated guide > for database restoring > and it can be found > from here: > https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan#Import_PostGIS_database_backup_with_terrain_data > > Your problem was that > username in the > database backup was > defined to be 'sami' > and it does not exist > in your system. It is > fixed by ignoring > username from the > database backup. > > Before restoring that > database backup you > should drop > fiware_test_terrain table. > > Let me know if this > was helpful. > > - Juha > > On Tue, Jun 2, 2015 at > 11:41 AM, Ibon > Salbidegoitia > > > wrote: > > Sorry I send > previous email > without finishing > the email as > error. You have > below all the email. > > Hi Juha, > > Sorry for the > delay, I was busy > and these last 3 > days I had some > problems with > tomcat so I > decided to format > everything and > start from the > beginning to know > what errors are > happening. > I will try to > explain > cronologically all > the steps and > error/bugs found. > > First of all I > update git > repository and > change to the > "fiware_rel_4.x" > branch to create > the WAR file with > the maven > command: mvn > install > -DdownloadSources=true > -DskipTests=true > -Pw3ds > After restarting > tomcat, the > geoserver seems to > work -> > http://151.80.143.120:8080/geoserver > (User: admin / > Pass: geoserver) > I did not use the > WAR published, I > created my own > from the new > github branch as > you see. > > So then I decided > to update the test > unit plan. Here I > have one comment > just to improve in > case you want. I > have checked that > you usually use > "space" on folders > and files which > usually is no > suitable. I refer > specificly to the > 4.3.2 version. > + The ZIP file > has a "space" on > the name what > requires to use > ASCI character to > download: wget > --no-check-certificate > https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip > + When ZIP is > decompressed, the > name of the folder > has also a > "space": /home/UnitTestPlan/rel\ > 4.3.2 > + PostGIS > database backup > has also a "space" > at the > end: /home/UnitTestPlan/rel\ > 4.3.2/PostGIS_database_backup\ > / > > Any way, I > continue with the > database restore. > On the PostGIS > database backup, I > checked on the > 4.3.2 version that > there are 2 > files: building_coordinates > and test_asset-terrain. > The > "building_coordinates" file > appears to be a > text format dump. > So is this file > necessary to > upload to database? > The > "test_asset-terrain" > could be uploaded > to postgres with > the following > command: pg_restore -d > fiware_test > /home/UnitTestPlan/rel\ > 4.3.2/PostGIS_database_backup\ > /FIWARE-postgis-test_asset-terrain > However, I receive > the following errors: > ================================================= > pg_restore: > [archiver (db)] > Error while > PROCESSING TOC: > pg_restore: > [archiver (db)] > Error from TOC > entry 184; 1259 > 65659 TABLE > fiware_test_terrain sami > pg_restore: > [archiver (db)] > could not execute > query: ERROR: > role "sami" does > not exist > Command was: ALTER > TABLE > public.fiware_test_terrain > OWNER TO sami; > > pg_restore: > [archiver (db)] > Error from TOC > entry 183; 1259 > 65657 SEQUENCE > fiware_test_terrain_id_seq > sami > pg_restore: > [archiver (db)] > could not execute > query: ERROR: > role "sami" does > not exist > Command was: ALTER > TABLE > public.fiware_test_terrain_id_seq > OWNER TO sami; > > WARNING: errors > ignored on restore: 2 > ================================================= > > I checked the > information stored > from backup on the > database and found > the following > tables, which I am > not sure if they > are all or there > are some missing. > ================================================= > > List of relations > Schema | Name > | Type | Owner > --------+----------------------------+----------+---------- > public | > fiware_test_terrain > | table | > postgres > public | > fiware_test_terrain_id_seq > | sequence | postgres > public | > geography_columns > | view > | postgres > public | > geometry_columns > | view > | postgres > public | > raster_columns > | view > | postgres > public | > raster_overviews > | view > | postgres > public | > spatial_ref_sys > | table > | postgres > ================================================= > > I did not continue > because it seems > that there are > some errors that I > should first > understand and fix > before continuing. > If you need > something else > from my side, > please let me > know. And please, > let me know if I > have done > something wrong. > Thank you. Best > regards, > > Ibon > > > 2015-06-02 8:33 > GMT+00:00 Ibon > Salbidegoitia > >: > > Hi Juha, > > Sorry for the > delay, I was > busy and these > last 3 days I > had some > problems with > tomcat so I > decided to > format > everything and > start from the > beginning to > know what > errors are > happening. > I will try to > explain > cronologically > all the steps > and error/bugs > found. > > First of all I > update git > repository and > change to the > "fiware_rel_4.x" > branch to > create the WAR > file with the > maven > command: mvn > install > -DdownloadSources=true > -DskipTests=true > -Pw3ds > After > restarting > tomcat, the > geoserver > seems to work > -> > http://151.80.143.120:8080/geoserver > (User: > admin / > Pass: geoserver) > I did not use > the WAR > published, I > created my own > from the new > github branch > as you see. > > So then I > decided to > update the > test unit > plan. Here I > have one > comment just > to improve in > case you want. > I have checked > that you > usually use > "space" on > folders and > files which > usually is no > suitable. I > refer > specificly to > the 4.3.2 version. > + The ZIP > file has a > "space" on the > name what > requires to > use ASCI > character to > download: wget > --no-check-certificate > https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip > + When ZIP > is > decompressed, > the name of > the folder has > also a > "space": /home/UnitTestPlan/rel\ > 4.3.2 > > > > > 2015-05-26 > 12:49 > GMT+00:00 Juha > Hyv?rinen > >: > > Hi Ibon, > > That > problem > should now > be fixed, > code is in > the github > (https://github.com/Cyberlightning/geoserver/tree/fiware_rel_4.x) > and we > have also > published > new war > file in > Fiware > FusionForge (https://forge.fiware.org/frs/download.php/1643/geoserver.war). > > We also > updated > test > assets and > reference > client. > Updated > reference > client is > already > available > from the > Github and > test > assets > will be > published > later > today or > tomorrow > morning to > FusionForge under > release > 4.3.2 > (https://forge.fiware.org/frs/?group_id=7). > > I hope > that this > release > will fix > problems > you > encountered earlier. > Please > report > back did > this solve > those > problems. > Thank you > for > submitting > these bug > reports. > > - Juha > > On Tue, > May 26, > 2015 at > 9:33 AM, > Juha > Hyv?rinen > > > wrote: > > Hi Ibon, > > We > have > looked > into > that > problem now > for > couple > of > days > and it > seems > to be > somehow related > to > Tomcat > and > system > locale > settings. > We can > reproduce > same > problem when > we > deploy > to a > Tomcat > instance > while > with > Jetty > everything > works > just fine. > > I'm > working with > the > fix > now, > but > there > is > also a > workaround: > deploy > war > package to > a > Jetty > instance. > > I will > notify > you > once I > have > pushed > code > changes to > git. > > - Juha > > On > Fri, > May > 22, > 2015 > at > 1:08 > PM, > Juha > Hyv?rinen > > > wrote: > > I > also > forgot > to > mention > that > you should > move > to > newer > test > client > which > we > will > release > officially > during > summer, > but code > is > already > available > from > the Github: > https://github.com/Cyberlightning/Cyber-WeX > > > Client > code > can be > found > from > here: > https://github.com/Cyberlightning/Cyber-WeX/tree/master/GIS/GIS_Client_xml3d > > - Juha > > On > Fri, > May 22, > 2015 > at > 12:30 > PM, Juha > Hyv?rinen > > > wrote: > > Hi > Ibon, > > > I have > to > admit > that > I'm > clueless > with > that > terrain > problem, > since > I couldn't > replicate > it. > Everything > seems > to > be > right > at > the > server > side > but > still > data > is > somehow > corrupted > when > it > arrives > to > the > client. > We > have > deployed > that > same > data > set > without > any > problems > to > more > than > 20 > different > systems > by > many > different > users > during > our > internal > development > and > testing. > > There > are > still > few > points > which > you > could > try. > 1. > Install > newer > PostGIS > version > for > example > from > Ubuntu > repositories > instead > of > manually > build > one. > > 2. > Try > our > upcoming > release > of > Geoserver > from > Github. > This > shouldn't > be > difficult, > since > you > already > build > your > own > version. > > If > you > used > git > to > clone > code > earlier, > you > only > need > to > pull > new > changes > from > the > repository > and > change > code > branch > from > fiware > to > fiware_rel_4.x > (git > pull > && > git > checkout > fiware_rel_4.x) > and > rebuild > project. > > > Also > I created > database > dump > from > building > coordinates > table > and > it's > as > an > attachment. > We > will > add > it > also > to > the > assets > and > update > documentation > once > we > have > little > spare > time > to > do > it. > Table > can > be > restored > with > command: sudo > -u > postgres > psql > databasename > < path/to/the/file.sql > > Before > restoring > that > dumb, > change > URLs > in > it > to > point > a place > where > you > actually > have > that > xml > file. > At > the > moment > URL > is > http://localhost/Test_asset/Building_model/building.xml > > - Juha > > On > Thu, > May > 21, > 2015 > at > 1:09 > PM, > Ibon > Salbidegoitia > > > wrote: > > Hi > Juha, > > > You > are > right, > I forgot > to > edit > the > tomcat7 > default > start-up > configuration > file. > Now > is > using > openJDK. > > > 2015-05-21 > 9:36 > GMT+00:00 > Juha > Hyv?rinen > >: > > Hi > Ibon, > > > Could > you > restart > tomcat > again > since > it > still > uses > Oracle > java > 1.8. > > - Juha > > On > Thu, > May > 21, > 2015 > at > 10:57 > AM, > Ibon > Salbidegoitia > > > wrote: > > Hi > Juha, > > > I checked > that > tomcat > was > down > due > to > low > xmx > size. > I restarted > and > modify > xmx > to > avoid > errors. > Asnwering > to > your > comments: > + > Please > let > me > know > when > you > update > the > documentation > to > check > importin > building > coordinates > + > I imported > with > following > command > of > postgres: > $ su > - postgres > $ createdb > fiware_test > $ pg_restore > -d > fiware_test > ./Test_asset_3.3/PostGIS_database_backup\ > /FIWARE-postgis-test_asset > > Because > I am > using > remote > server > I cannot > use > pgadmin, > but > the > import > was > correct > without > errors > and > I checked > that > the > data > was > correct. > + > I am > using > Oracle > java > (1.8.0_31), > so > I will > change > it > to openJDK7 > as > you > recommend. > Now > is > changed > to > openJDK7 > to > version > 1.7.0_79 > > > As > I said, > the > Geoserver > is > active, > so > you > can > check > on > it > whatever > you > want. > Kind > regards, > > Ibon > > > > 2015-05-21 > 6:56 > GMT+00:00 > Juha > Hyv?rinen > >: > > Hi > Ibon, > > > I was > looking > into > those > errors > you > reported > but > your > server > went > down > before > I could > figure > out > any > final > solution. > Here > are > my > thoughts > so > far. > > I noticed > that > something > have > went > wrong > at > least > with > building > coordinate > importing > and > we > will > update > documentation > how > to > import > those > properly. > I can > notice > you > once > that > is > done. > > I also > would > like > to > make > sure > that > fiware:fiware_test_terrain > is > data > set > provided > by > us > and > you > imported > it > to > the > database > as > instructed > with > pgAdmin? > > Third > point: > in > the > past > I had > some > problems > with > Geoserver > when > we > used > Oracle > java, > so > please > make > sure > that > you > use > openJDK7. > You > can > check > used > Java > version > with > commad: > > java > -version > > result > should > be > something > similar: > ----------------- > :~$ > java > -version > java > version > "1.7.0_79" > OpenJDK > Runtime > Environment > (IcedTea > 2.5.5) > (7u79-2.5.5-0ubuntu0.14.04.2) > OpenJDK > 64-Bit > Server > VM > (build > 24.79-b02, > mixed > mode) > > If > not, > change > default > java > version > with > command: > sudo > update-alternatives > --config > java > > - Juha > > On > Mon, > May > 18, > 2015 > at > 10:34 > AM, > Ibon > Salbidegoitia > > > wrote: > > Hi > Juha, > > > The > last > couple > of > months > I have > been > learning > and > understanding > all > the > things > that > we > discussed > 2 months > ago. > Once > I knew > how > to > do > most > of > the > things, > I tried > to > do > the > "Unit > Testing > Plan" > from > the > Wiki > (https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan) > I have > found > some > bugs/errors > that > I think > they > should > be > corrected > if > possible: > + Section: > 1.2.2.3 > PostGIS > connection > to > GeoServer > + terrain_texture_raste > has > a EPSG:404000 > SRS > (set > by > default) > + terrain_texture_orto > has > a EPSG:3067 > SRS > (set > by > default) > + Section: > 1.2.3.2 > terrain_texture_orto.tif > and > terrain_texture_raster.tif > + On > building_coordinates > SRS > is > not > automatically > assigned > + On > building_coordinates > table, > when > SRS > EPSG:3047 > value > is > introduced > manually, > the > "Bounding > Box" > values > seem > to > be > wrong > assigned > + Select > Activate > and > Queryable > in > the > W3DS > Settings, > it > is > not > clear > if > it > is > for > both > tables > + In > Objects > Attributes > select > name > for > the > Object > ID. > Only > for > building_coordinates > table, > because > fiware_test_terrain > table > has > not > got > this > Object > ID. > > I have > follow > everything > sucessfully > but > at > the > end, > it > is > not > possible > to > see > the > correct > result > (http://151.80.143.120/GIS/). > I am > not > sure > if > it > is > for > the > "building_coordinates" > bounding > box > values > or > what. > You > can > check > on > Geoserver > that > everything > is > correct > (http://151.80.143.120/geoserver > User: > admin > Pass: > geoserver. > The > server > is > a server > to > test > this > W3DS > service > only, > so > you > can > use > it > without > any > problems) > So > something > seems > that > it > is > not > correctly > working. > What > can > it > be? > (All > the > data > was > correctly > imported > to > PostGIS > without > errors) > Thank > you > in > advance. > Best > regards, > > Ibon > > > 2015-03-26 > 7:42 > GMT+00:00 > Juha > Hyv?rinen > >: > > Hi > Ibon, > > > I have > been > out > of > office > and > didn't > have > time > to > reply > earlier. > > EPSG:900913 > is > map > projection > defined > by > Google > and > it's > using > lat/lon > coordinates. > At > the > moment > requesting > data > from > non-metric > coordinate > systems > will > result > erroneous > output. > Some > projection > tools > may > use > that > as > a default > projection > if > it's > undefined. > I suggest > that > you > check > your > projection > definitions > from > importing > code > and > if > you > didn't > set > any > coordinate > system > set > one. > > I also > quickly > checked > that > one > tile > you > provided > and > there > was > a lot > no-data > values. > You > could > probably > get > better > results > if > you > select > input > data > from > area > where > there > are > actually > data > to > show. > > Please > note > that > only > UTM > coordinate > systems > (or > similar) > are > supported > by > W3DS > module. > > For > visualization > you > can > use > sample > client > provided > within > FIWARE > project. > It > is > quite > simple > and > you > shouldn't > have > any > problems > to > understand > how > it > does > requests > to > the > server > and > visualize > received > 3D > data. > > - Juha > > On > Wed, > Mar > 18, > 2015 > at > 10:11 > AM, > Ibon > Salbidegoitia > > > wrote: > > Hi > Juha, > > > I have > been > searching > and > found > that > my > data > is > in EPSG:900913 > and > now > the > layer > is > published > and > I can > see > it. > Is > this > the > correct > way > to > publish > it? > So > now, > I am > supposed > to > use > the > 3D > capabilities > to > visualize > in > 3D. > I have > checked > the > XML3D > link > that > you > sent > me > but > I don't > understand > how > I have > to > apply > to > visualize > the > layer > in > 3D. > Can > you > please > be > more > specific > or > give > me > some > help? > Thank > you > in > advance. > Kind > regards, > > Ibon > > > 2015-03-18 > 7:13 > GMT+00:00 > Ibon > Salbidegoitia > >: > > Hi > Juha, > > > I have > been > able > to > introduce > the > XYZ > files > (*.asc > in > my > case) > to > the > Postgre > database > with > the > PostGIS > extension. > I am > able > to > see > the > layer > from > the > Geoserver > but > I have > some > doubts > about > the > data > to > be > introduced > that > I don't > know > how > to > fill > when > Geoserver > asks > for > publishing > the > layer. > I have > followed > the > following > command > lines > to > introduce > the > data > to > database > which > I will > appreciate > if > you > can > tell > me > if > they > are > correct. > And > also, > I would > like > to > know > how > can > I publish > the > layer > because > the > link > that > you > send > me > doesn't > give > me > enough > information > to > be > able > for > that. > > ============================================================================================================== > ===== > Download > the > XYZ > data > as > *.asc > file > ===== > $ mkdir > /root/data > $ cd > /root/data > $ wget > ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT/H0037/mdt_037_1_8.zip > $ unzip > mdt_037_1_8.zip > $ gdal_polygonize.py > -f > "ESRI > Shapefile" > mdt_037_1_8.asc > mdt_037_1_8.shp > > ===== > Create > database > on > Postgre > as > postgres > user > ===== > $ su > - postgres > $ psql > -U > postgres > -d > postgres > $ create > database > [yourdatabase]; > -> > CREATE > DATABASE > $ \list > $ \q > $ psql > -d > [yourdatabase] > -c > "CREATE > EXTENSION > postgis;" > -> > CREATE > EXTENSION > $ exit > > ===== > Define > Postgre > password > ===== > $ psql > -U > postgres > $ \password > postgres > $ \q > $ exit > > ===== > Import > data > with > "shp2pgsql" > utility > of > postgis > (http://www.bostongis.com/pgsql2shp_shp2pgsql_quickguide.bqg) > ===== > $ /root/postgis-2.1.0/loader/shp2pgsql > /root/data/mdt_037_1_8.shp > >sql > -> > Shapefile > type: > Polygon > -> > Postgis > type: > MULTIPOLYGON[2] > > ===== > Import > created > sql > to > postgre > ===== > $ mv > sql > /var/lib/postgresql/ > $ chmod > 777 > /var/lib/postgresql/sql > $ su > - postgres > $ psql > -U > postgres > -d > [yourdatabase] > -f > sql > $ psql > -U > postgres > -d > [yourdatabase] > -c > "\d" > -> > List > of > relations > -> > Schema > | > Name > | > Type > | > Owner > > -> > --------+---------------------+----------+---------- > -> > public > | geography_columns > | > view > > | postgres > -> > public > | geometry_columns > | > view > | postgres > -> > public > | mdt_037_1_8 > > | > table > | > postgres > -> > public > | mdt_037_1_8_gid_seq > | sequence > | postgres > -> > ... > > $ exit > > ===== > Add > new > workspace > ===== > + Name: > Fiware > + URI > of > name > space: > com.fiware > > ===== > Add > new > "Data > store" > on > Geoserver > (http://151.80.143.120:8080/geoserver) > ===== > + Select > the > "PostGIS > - PostGIS > Database" > vectorial > data > + Add > data > required: > + Workspace: > Fiware > + Name > of > origin > data: > Fiware_Test1 > + database: > fiwaretest1 > + host: > localhost > + port: > 5432 > + user: > postgres > + pass: > postgres > > ===== > Add > new > layer > and > make > public > ===== > + Edit > layer > features??? > + SRS? > + ... > > ============================================================================================================== > > Thank > you. > Kind > regards, > > Ibon > > 2015-03-03 > 13:42 > GMT+00:00 > Juha > Hyv?rinen > >: > > Hi > Ibon, > > > Yes, > write > all > polygons > to > a single > shp > file > or > to > a single > table > inside > a database > and > you > are > good > to > go. > > > I would > recommend > that > you > also > study > some > basics > about > rendering > engines > and > search > general > knowledge > what > data > 3D > models > really > keeps > inside > them. > > > In > FIWARE > we > use > XML3D > as > a rendering > engine > and > all > 3D > models > produced > by > GeoServer > are > in > XML3D > format. > Here > is > one > guide > how > to > use > XML3D > rendering > engine: > https://github.com/xml3d/xml3d.js/wiki/The-Basics-of-XML3D > > On > Tue, > Mar > 3, > 2015 > at > 2:53 > PM, > Ibon > Salbidegoitia > > > wrote: > > Hi > Juha, > > > Thank > you > for > your > clarifications. > I have > some > doubts > about > your > comments. > I understand > how > do > I have > to > create > the > polygons. > I have > done > a python > script > with > the > for > loops > as > you > said > (attached) > which > creates > the > POLIGONZs. > I have > done > a SHP > file > for > each > polygon, > but > should > I do > a single > SHP > with > all > the > polygons? > I suppose > that > I should > do > a single > SHP > because > I can > have > many > polygons > if > the > resolution > is > too > high. > Or > this > is > not > possible? > The > procedure > of > writting > data > to > database > with > psycopg2 > is > similar, > so > the > same > question, > all > polygons > together > is > it > possible? > Kind > regards, > > Ibon > > > 2015-03-03 > 11:35 > GMT+00:00 > Juha > Hyv?rinen > >: > > Hi > Ibon, > > > I have > just > updated > User > and > Programmers > guide. > I hope > that > these > tips > helps > you > forward. > Added > content: > > Data > generation > from > *.xyz > file > format > > Here > is > a small > sample > from > source > dataset: > > Easting > Northing > Elevation > --------------------------------- > 398000.000 > 7542000.000 > 279.950 > 398010.000 > 7542000.000 > 279.388 > 398020.000 > 7542000.000 > 278.818 > 398000.000 > 7541990.000 > 281.002 > 398010.000 > 7541990.000 > 280.436 > 398020.000 > 7541990.000 > 279.847 > 398000.000 > 7541980.000 > 282.096 > 398010.000 > 7541980.000 > 281.539 > 398020.000 > 7541980.000 > 280.944 > > > That > data > produces > following > 2D > grid: > > > > 0 > 1 > > > 2 > |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| > 0 | > 398000.000 > 7542000.000 > 279.950 > | > 398010.000 > 7542000.000 > 279.388 > | > 398020.000 > 7542000.000 > 278.818 > | > |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| > 1 | > 398000.000 > 7541990.000 > 281.002 > | > 398010.000 > 7541990.000 > 280.436 > | > 398020.000 > 7541990.000 > 279.847 > | > |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| > 2 | > 398000.000 > 7541980.000 > 282.096 > | > 398010.000 > 7541980.000 > 281.539 > | > 398020.000 > 7541980.000 > 280.944 > | > |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| > > > From > that > grid > we > can > create > polygons > representing > terrain > surface. > > WKT > polygons > generated > from > that > dataset > should > look > like > this: > POLYGONZ((398000.000 > 7542000.000 > 279.950, > 398010.000 > 7542000.000 > 279.388, > 398010.000 > 7541990.000 > 280.436, > 398000.000 > 7541990.000 > 281.002, > 398000.000 > 7542000.000 > 279.950)) > POLYGONZ((398010.000 > 7542000.000 > 279.388, > 398020.000 > 7542000.000 > 278.818, > 398020.000 > 7541990.000 > 279.847, > 398010.000 > 7541990.000 > 280.436, > 398010.000 > 7542000.000 > 279.388)) > POLYGONZ((398000.000 > 7541990.000 > 281.002, > 398010.000 > 7541990.000 > 280.436, > 398010.000 > 7541980.000 > 281.539, > 398000.000 > 7541980.000 > 282.096, > 398000.000 > 7541990.000 > 281.002)) > POLYGONZ((398010.000 > 7541990.000 > 280.436, > 398020.000 > 7541990.000 > 279.847, > 398020.000 > 7541980.000 > 280.944, > 398010.000 > 7541980.000 > 281.539, > 398010.000 > 7541990.000 > 280.436)) > > NOTE: > It > is > said > in > WKT > specification > that > polygons > needs > to > be > closed, > meaning > that > start > and > end > points > are > the > same. > > Each > polygon > should > be > written > into > a PostGIS > database > or > into > a shape > file. > > - Shapefile > writing > can > be > done > for > example > with > python > library > called > pyshp > (https://github.com/GeospatialPython/pyshp). > > - PostGIS > can > be > used > for > example > with > psycopg2 > library > (http://initd.org/psycopg/). > > > Depending > on > selected > storage > format > choose > corresponding > publishing > steps > for > data > publishing > into > a W3DS > layer > with > GeoServer. > Official > GeoServer > guide > how > to > publish > a shapefile: > > - http://docs.geoserver.org/stable/en/user/gettingstarted/shapefile-quickstart/index.html > > Official > GeoServer > guide > how > to > publish > a PostGIS > table: > > - http://docs.geoserver.org/stable/en/user/gettingstarted/postgis-quickstart/index.html > > > > Adding > texture > > Raster > data > (f.ex. > ortophotos) > is > used > as > terrain > texture > and > guide > how > to > work > with > rasters > can > be > found > from > here: > - http://docs.geoserver.org/stable/en/user/data/raster/index.html > > > > On > Mon, > Mar > 2, > 2015 > at > 6:23 > PM, > Ibon > Salbidegoitia > > > wrote: > > Hi > Juha, > > > Thank > you > for > the > steps. > However, > I would > like > to > clarify > some > things > to > have > clear > what > I should > do. > Imagine > I have > the > data: > lat > lon > alt > 0 > > 0 0 > 0 > > 1 5 > 0 > > 2 10 > 1 > > 0 5 > > 1 > > 1 > 10 > 1 > > 2 > 15 > 2 > > 0 10 > > 2 > > 1 > 15 > 2 > > 2 > 20 > This > is > like > a flat > surface. > So > I have > to > create > a 2D > array > like: > 10 > 15 > 20 > 5 > 10 > 15 > 0 > 5 > 10 > I have > never > create > wkt > polygons > in > 3D, > but > as > I have > seen > in > some > websites, > this > could > be > done > like > this? > POLYGON > ((0 > 0 0, > 0 1 > 5, > 1 1 > 10, > 1 0 > 5), > (0 > 1 5, > 0 2 > 10, > 1 1 > 10, > 1 2 > 15), > (1 > 0 5, > 2 0 > 10, > 1 1 > 10, > 2 1 > 15), > (1 > 1 10, > 1 2 > 15, > 2 1 > 15, > 2 2 > 20)) > > After > this, > I am > not > sure > how > to > upload > to > DDBB > in > shp > because > I have > many > files. > Also, > I don't > know > how > to > associate > the > ortophoto > to > the > shapes. > Being > honest, > I am > a little > bit > lost > and > I would > appreciate > if > you > can > help > me. > Thank > you. > Kind > regards, > > Ibon > > > 2015-03-02 > 7:38 > GMT+00:00 > Juha > Hyv?rinen > >: > > Hi > Ibon, > > > I'm > sorry > to > hear > that > you > still > have > those > problems. > I'm > looking > into > that > and > I will > report > back > to > you > if > I'm > able > to > reproduce > and > solve > it > in > some > environment. > > At > the > moment > you > can't > use > .tiff > file > format. > > Since > XML3D, > which > we > use > as > a rendering > engine, > requires > that > rendered > models > consist > of > polygons > we > had > to > create > polygonal > terrain > from > .asc > point > grid. > In > order > to > reduce > processor > loads > we > decided > that > data > should > be > stored > as > polygons. > In > that > way > data > can > be > returned > to > a client > without > any > further > processing. > > We > have > developed > proprietary > importing > tools > to > support > our > business > cases > and > therefore > I can't > provide > those > directly > to > you > but > I can > describe > what > we > did. > > Our > workflow > from > .asc > files > included > three > steps: > 1. > Read > asc > file > and > create > 2D > array > from > it > where > each > cell > is > a point > from > asc > file > 2. > Inside > a for > loop > select > four > points > from > array > and > create > wkt > polygon > from > those > points > 3. > Write > just > created > polygon > to > a database > or > to > a shp > file > > When > polygons > are > stored > in > a database > you > need > to > publish > that > table > in > GeoServer > as > a layer > and > configure > it > to > use > W3DS > module. > > I hope > that > this > clarifies > needed > steps > from > source > data > to > a production > use. > > - Juha > > > On > Fri, > Feb > 27, > 2015 > at > 8:04 > PM, > Ibon > Salbidegoitia > > > wrote: > > Hi > Juha, > > > I continue > trying > to > find > my > problem > but > I haven't > advance > :( > Anyway, > I don't > write > for > that. > I am > trying > to > upload > xyz > format > data > and > some > ortophotos > to > display > them > with > W3DS. > I have > the > data > in > *.asc > files > and > I have > a TIF > file > with > all > of > them > merged. > As > the > documentation > (https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide) > says > that > the > /.shp, > .dbf/ and > /.shx/files > are > mandatory, > I should > convert > all > /.asc/ > to > these > formats? > I cannot > use/.tif/? > As > the > documentation > syas, > I have > to > upload > this > files > to > the > server > and > I suppose > that > the > ortophotos > also. > However, > I don't > know > how > to > display > them > afterwards. > Can > you > explain > me? > I am > in > a Fiware > European > project > and > as > you > are > the > support > of > Fiware > I hope > you > can > help > me. > Thank > you. > Best > regards, > > Ibon > > 2015-02-24 > 11:58 > GMT+00:00 > Juha > Hyv?rinen > >: > > Hi > Ibon, > > > I have > no > glue > why > it's > not > loading > since > personally > I haven't > ever > used > that > module. > You > should > read > GeoServer > startup > logs > and > check > if > there > are > some > fatal > errors > in > service > loading. > Logs > should > have > something > similar > lines > to > these: > 24 > Feb > 13:53:03 > INFO > [org.geoserver] > - Loaded > service > 'wfs', > enabled > 24 > Feb > 13:53:03 > INFO > [org.geoserver] > - Loaded > service > 'wms', > enabled > 24 > Feb > 13:53:03 > INFO > [org.geoserver] > - Loaded > service > 'wcs', > enabled > 24 > Feb > 13:53:03 > INFO > [org.geoserver] > - Loaded > service > 'w3ds', > enabled > > Check > errors > near > those. > > There > is > also > GeoServer > users > mail > list > and > you > probably > could > get > more > helpful > response > from > there, > since > I'm > not > expert > in > that > area. > > On > Tue, > Feb > 24, > 2015 > at > 1:13 > PM, > Ibon > Salbidegoitia > > > wrote: > > Hi > Juha, > > > Thank > you > for > the > comments. > About > the > "Importer > extension" > I downloaded > the > core > extension > for > version > 2.6.0 > as > you > said > because > I show > that > was > the > version > when > I install > it. > So, > can > you > guess > the > reason > of > the > extension > for > not > working. > As > you > explained, > W3DS > is > an > isolated > module, > so > it > has > no > sense > for > not > working. > Kind > regards, > > Ibon > > 2015-02-24 > 11:08 > GMT+00:00 > Juha > Hyv?rinen > >: > > Hi > Ibon, > > > Changes > delivered > to > FIWARE > are > isolated > only > to > W3DS > module > and > those > are > written > on > top > of > the > GeoServer > version > 2.6.0. > Therefore > you > need > to > use > extensions > written > for > that > specific > version. > We > will > move > to > next > stable > version > 2.7 > when > it > is > released > later > this > spring. > Currently > 2.7 > release > is > in > RC1 > state. > > Our > changes > are > also > in > the > official > GeoServer > master > and > 2.7 > branches > and > you > could > actually > try > to > build > either > of > those > and > see > if > build > problem > still > exists. > Meanwhile > I try > to > replicate > your > problem > in > a virtual > machine > since > everything > worked > well > in > every > physical > machines > I have > access > to. > > On > Tue, > Feb > 24, > 2015 > at > 11:13 > AM, > Ibon > Salbidegoitia > > > wrote: > > Hi > Juha, > > > I continue > having > a failure > message > in > the > same > test. > I have > continued > looking > to > the > builded > version > (without > tests > as > I said) > and > I was > trying > to > use > the > "Importer > extension" > installed > by > copying > some > source > from > this > link: > http://docs.geoserver.org/latest/en/user/extensions/importer/installing.html > I copied > the > files > to > the > folder > ".../geoserver/src/web/app/target/geoserver/WEB-INF/lib" > as > it > says > and > restart > Geoserver, > but > the > extension > does > not > seems > to > load. > Could > be > due > to > the > Geoserver > version > done > for > fiware? > Or, > how > could > I solve > the > problem? > Thank > you. > Kind > regards, > > Ibon > > 2015-02-23 > 11:55 > GMT+00:00 > Juha > Hyv?rinen > >: > > Hi > Ibon, > > > Only > difference > between > our > work > chains > that > I was > able > to > find > is > that > I use > also > clean > statement > in > mvn > build > command. > Could > you > try > that? > If > it's > still > not > working > I try > to > find > some > time > to > reproduce > problem > in > a clean > machine. > > mvn > clean > install > -DdownloadSources=true > -DskipTests=false > -Pw3ds > > Resulting > following > summary: > [INFO] > ------------------------------------------------------------------------ > [INFO] > Reactor > Summary: > [INFO] > ------------------------------------------------------------------------ > [INFO] > GeoServer > ............................................. > SUCCESS > [2.088s] > [INFO] > Core > Platform > Module > .................................. > SUCCESS > [9.062s] > [INFO] > Open > Web > Service > Module > ............................... > SUCCESS > [5.411s] > [INFO] > Main > Module > ........................................... > SUCCESS > [1:58.712s] > [INFO] > GeoServer > Security > Modules > ............................ > SUCCESS > [0.043s] > [INFO] > GeoServer > JDBC > Security > Module > ........................ > SUCCESS > [18.349s] > [INFO] > GeoServer > LDAP > Security > Module > ........................ > SUCCESS > [35.825s] > [INFO] > Web > Coverage > Service > Module > ........................... > SUCCESS > [1.450s] > [INFO] > Web > Coverage > Service > 1.0 > Module > ....................... > SUCCESS > [18.896s] > [INFO] > Web > Coverage > Service > 1.1 > Module > ....................... > SUCCESS > [19.249s] > [INFO] > Web > Coverage > Service > 2.0 > Module > ....................... > SUCCESS > [46.273s] > [INFO] > Web > Feature > Service > Module > ............................ > SUCCESS > [1:21.581s] > [INFO] > Web > Map > Service > Module > ................................ > SUCCESS > [1:27.636s] > [INFO] > KML > support > for > GeoServer > ............................. > SUCCESS > [24.646s] > [INFO] > GeoWebCache > (GWC) > Module > .............................. > SUCCESS > [55.551s] > [INFO] > REST > Support > Module > ................................... > SUCCESS > [10.524s] > [INFO] > REST > Configuration > Service > Module > ..................... > SUCCESS > [54.318s] > [INFO] > GeoServer > Web > Modules > ................................. > SUCCESS > [0.028s] > [INFO] > Core > UI > Module > ........................................ > SUCCESS > [46.005s] > [INFO] > WMS > UI > Module > ......................................... > SUCCESS > [17.764s] > [INFO] > GWC > UI > Module > ......................................... > SUCCESS > [23.123s] > [INFO] > WFS > UI > Module > ......................................... > SUCCESS > [10.234s] > [INFO] > Demoes > Module > ......................................... > SUCCESS > [16.390s] > [INFO] > WCS > UI > Module > ......................................... > SUCCESS > [12.849s] > [INFO] > Security > UI > Modules > ................................... > SUCCESS > [0.037s] > [INFO] > Security > UI > Core > Module > ............................... > SUCCESS > [1:14.168s] > [INFO] > Security > UI > JDBC > Module > ............................... > SUCCESS > [50.839s] > [INFO] > Security > UI > LDAP > Module > ............................... > SUCCESS > [27.079s] > [INFO] > REST > UI > Module > ........................................ > SUCCESS > [10.953s] > [INFO] > Community > Space > ....................................... > SUCCESS > [0.027s] > [INFO] > Web > 3D > Service > ........................................ > SUCCESS > [4.663s] > [INFO] > GeoServer > Web > Application > ............................. > SUCCESS > [3.207s] > [INFO] > GeoServer > Extensions > .................................. > SUCCESS > [0.083s] > [INFO] > ------------------------------------------------------------------------ > [INFO] > ------------------------------------------------------------------------ > [INFO] > BUILD > SUCCESSFUL > [INFO] > ------------------------------------------------------------------------ > [INFO] > Total > time: > 14 > minutes > 49 > seconds > [INFO] > Finished > at: > Mon > Feb > 23 > 13:26:42 > EET > 2015 > [INFO] > Final > Memory: > 187M/1400M > [INFO] > ------------------------------------------------------------------------ > > On > Mon, > Feb > 23, > 2015 > at > 12:33 > PM, > Ibon > Salbidegoitia > > > wrote: > > Hi > Juha, > > > I followed > the > installation > guide > of > Fiware > for > installation. > I used > a Ubuntu > 14.04 > Server > 64 > bits > with > 4 cores, > 8GB > RAM > and > 100GB > of > HD. > The > version > of > JDK > (openjdk-7-jdk) > is 7u51-2.4.6-1ubuntu4, > and > postgis 2.1.0 > The > source > that > I downloaded > is > the > one > you > shared > from > git > (git > clone > -b > fiware > https://github.com/Cyberlightning/geoserver.git) > I followed > all > the > commands > so > that's > the > reason > from > asking. > I would > appreciate > if > you > can > tell > me > what > can > be > different. > Thank > you. > Kind > regards, > > Ibon > > 2015-02-20 > 13:03 > GMT+00:00 > Juha > Hyv?rinen > >: > > Hi > Ibon, > > > without > knowledge > about > your > build > system > (used > java > version, > used > operating > system > etc.) > and > where > you > downloaded > sources > I'm > not > able > to > help > you > with > this > problem. > I just > tested > version > which > we > have > delivered > to > FIWARE > (https://github.com/Cyberlightning/geoserver/tree/fiware) > and > at > least > it > build > without > any > errors > in > any > test > cases. > > Also, > CatalogBuilder > is > bit > out > of > my > knowledge > scope. > > > > On > Fri, > Feb > 20, > 2015 > at > 1:18 > PM, > Ibon > Salbidegoitia > > wrote: > > > Sorry, > I forget > to > attach > the > log. > > 2015-02-20 > 11:17 > GMT+00:00 > Ibon > Salbidegoitia > :Hi > Juha,I > have > one > comment > about > the > installation. > Previously > when > I installed > the > geoserver > I didn't > notice > because > I was > building > without > tests.But > I was > building > geoserver > with > test > where > I found > a failure > on:testSingleBandedCoverage(org.geoserver.catalog.impl.CatalogBuilderTest)I > attached > the > log > of > the > output > for > your > information.How > can > I solve > this > problem?Thank > you > in > advance. > Kind > regards,Ibon2015-02-05 > 7:48 > GMT+00:00 > Ibon > Salbidegoitia > :Hi > Juha,Thank > you > for > the > reply.I > have > a xyz > format > data > also > so > I will > try > to > test > what > you > sent > me > and > look > for > the > Unit > Testing > Plan > link > you > sent.If > I have > any > doubt > or > problem > I will > come > back > to > you. > Thank > you.Kind > regards,Ibon2015-02-05 > 7:27 > GMT+01:00 > Juha > Hyv?rinen > :Hi > Ibon,Data > publishing > is > well > documented > in > GeoServer > user > manual: http://docs.geoserver.org/2.5.x/en/user/Data > which > we > used > in > our > development > was > from National > Land > Survey > of > Finland. > Source > data > was > in -xyz-format, > which > contains > elevation > data > with > spatial > information. > With > this > source > information > it > is > possible > to > generate > shapefile > consisting > polygon > structure > with > elevation > data. > 2D > presentation > of > the > converted > shapefile > with > elevation > points > is > flat > grid, > in > 3D > presentation > each > grid > points > are > in > same > elevation > level > as > in > the > real > world. > Therefore > this > grid > with > elevation > data > can > be > used > as > source > for > terrain > presentation.You > can > also > read > user > guide > from:https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_GuideYou > can > find > guide > for > setting > up > test > setup > from > here: https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan- > Juha---------- > Forwarded > message > ----------From: > Ibon > Salbidegoitia > Date: > Wed, > Feb > 4, > 2015 > at > 12:35 > AMSubject: > W3DS > - FIWARETo: > miika.santala at cyberlightning.comDear > Miika,I > am > Ibon > from > Spain.I > write > to > you > because > I am > involved > in > the > FIWARE > European > project. > This > project > promote > a GIS > data > provider > with > the > W3DS > for > 3D > visualization > as > the > one > you > show > on > the > following > link:http://130.206.81.238:8080/gis_test_client/index.xhtmlI > contact > you > because > a have > been > in > contact > with > Jorge > Gustavo, > who > made > a similar > use > of > W3DS > (http://www.sigte.udg.edu/jornadassiglibre2012/uploads/presentaciones_12/p43.pdf) > and > he > told > me > that > W3DS > is > now > supported > by > you.I > have > followed > the > instructions > of > FIWARE > wiki > (https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Installation_and_Administration_Guide) > to > start > using > the > service > and > everything > seems > to > work > perfectly > with > Jetty.However, > I would > like > to > know > how > I have > to store > GIS > data > with > 3D > information > straight > to > GeoServer. > Is > there > any > documentation > of > how > to > upload > this > kind > of > information? > Can > you > share > with > me > any > documentation > about > it?Thank > you > in > advance. > Yours > sincerely,Ibon > -- > Juha > Hyv?rinenSoftware > EngineerCyberlightning > Ltd.email. > juha.hyvarinen at cyberlightning.comSee > our > new > press > release: http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/www.cyberlightning.comThis > e-mail > and > all > attached > material > are > confidential > and > may > contain > legally > privileged > information. > If > you > are > not > the > intended > recipient, > please > contact > the > sender > and > delete > the > e-mail > from > your > system > without > producing, > distributing > or > retaining > copies > thereof. > > > > > > -- > > Juha > Hyv?rinen > Software > Engineer > Cyberlightning > Ltd. > email. > juha.hyvarinen at cyberlightning.com > See > our > new > press > release: http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ > www.cyberlightning.com > This > e-mail > and > all > attached > material > are > confidential > and > may > contain > legally > privileged > information. > If > you > are > not > the > intended > recipient, > please > contact > the > sender > and > delete > the > e-mail > from > your > system > without > producing, > distributing > or > retaining > copies > thereof. > > > > > > > -- > > Juha > Hyv?rinen > Software > Engineer > Cyberlightning > Ltd. > > email. > juha.hyvarinen at cyberlightning.com > > > See > our > new > press > release: > http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ > > www.cyberlightning.com > > > This > e-mail > and > all > attached > material > are > confidential > and > may > contain > legally > privileged > information. > If > you > are > not > the > intended > recipient, > please > contact > the > sender > and > delete > the > e-mail > from > your > system > without > producing, > distributing > or > retaining > copies > thereof. > > > > > > -- > > Juha > Hyv?rinen > Software > Engineer > Cyberlightning > Ltd. > > email. > juha.hyvarinen at cyberlightning.com > > > See > our > new > press > release: > http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ > > www.cyberlightning.com > > > This > e-mail > and > all > attached > material > are > confidential > and > may > contain > legally > privileged > information. > If > you > are > not > the > intended > recipient, > please > contact > the > sender > and > delete > the > e-mail > from > your > system > without > producing, > distributing > or > retaining > copies > thereof. > > > > > > -- > > Juha > Hyv?rinen > Software > Engineer > Cyberlightning > Ltd. > > email. > juha.hyvarinen at cyberlightning.com > > > See > our > new > press > release: > http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ > > www.cyberlightning.com > > > This > e-mail > and > all > attached > material > are > confidential > and > may > contain > legally > privileged > information. > If > you > are > not > the > intended > recipient, > please > contact > the > sender > and > delete > the > e-mail > from > your > system > without > producing, > distributing > or > retaining > copies > thereof. > > > > > > -- > > Juha > Hyv?rinen > Software > Engineer > Cyberlightning > Ltd. > > email. > juha.hyvarinen at cyberlightning.com > > > See > our > new > press > release: > http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ > > www.cyberlightning.com > > > This > e-mail > and > all > attached > material > are > confidential > and > may > contain > legally > privileged > information. > If > you > are > not > the > intended > recipient, > please > contact > the > sender > and > delete > the > e-mail > from > your > system > without > producing, > distributing > or > retaining > copies > thereof. > > > > > > -- > > Juha > Hyv?rinen > Software > Engineer > Cyberlightning > Ltd. > > email. > juha.hyvarinen at cyberlightning.com > > > See > our > new > press > release: > http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ > > www.cyberlightning.com > > > This > e-mail > and > all > attached > material > are > confidential > and > may > contain > legally > privileged > information. > If > you > are > not > the > intended > recipient, > please > contact > the > sender > and > delete > the > e-mail > from > your > system > without > producing, > distributing > or > retaining > copies > thereof. > > > > > > -- > > Juha > Hyv?rinen > Software > Engineer > Cyberlightning > Ltd. > > email. > juha.hyvarinen at cyberlightning.com > > > See > our > new > press > release: > http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ > > www.cyberlightning.com > > > This > e-mail > and > all > attached > material > are > confidential > and > may > contain > legally > privileged > information. > If > you > are > not > the > intended > recipient, > please > contact > the > sender > and > delete > the > e-mail > from > your > system > without > producing, > distributing > or > retaining > copies > thereof. > > > > > > > -- > > Juha > Hyv?rinen > Software > Engineer > Cyberlightning > Ltd. > > email. > juha.hyvarinen at cyberlightning.com > > > See > our > new > press > release: > http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ > > www.cyberlightning.com > > > This > e-mail > and > all > attached > material > are > confidential > and > may > contain > legally > privileged > information. > If > you > are > not > the > intended > recipient, > please > contact > the > sender > and > delete > the > e-mail > from > your > system > without > producing, > distributing > or > retaining > copies > thereof. > > > > > > -- > > Juha > Hyv?rinen > Software > Engineer > Cyberlightning > Ltd. > > email. > juha.hyvarinen at cyberlightning.com > > > See > our > new > press > release: > http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ > > www.cyberlightning.com > > > This > e-mail > and > all > attached > material > are > confidential > and > may > contain > legally > privileged > information. > If > you > are > not > the > intended > recipient, > please > contact > the > sender > and > delete > the > e-mail > from > your > system > without > producing, > distributing > or > retaining > copies > thereof. > > > > > > -- > > Juha > Hyv?rinen > Software > Engineer > Cyberlightning > Ltd. > > email. > juha.hyvarinen at cyberlightning.com > > > See > our > new > press > release: > http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ > > www.cyberlightning.com > > > This > e-mail > and > all > attached > material > are > confidential > and > may > contain > legally > privileged > information. > If > you > are > not > the > intended > recipient, > please > contact > the > sender > and > delete > the > e-mail > from > your > system > without > producing, > distributing > or > retaining > copies > thereof. > > > > > > -- > > Juha > Hyv?rinen > Software > Engineer > Cyberlightning > Ltd. > > email. > juha.hyvarinen at cyberlightning.com > > > See > our > new > press > release: > http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ > > www.cyberlightning.com > > > This > e-mail > and > all > attached > material > are > confidential > and > may > contain > legally > privileged > information. > If > you > are > not > the > intended > recipient, > please > contact > the > sender > and > delete > the > e-mail > from > your > system > without > producing, > distributing > or > retaining > copies > thereof. > > > > > -- > Juha > Hyv?rinen > Software > Engineer > Cyberlightning > Ltd. > > email. > juha.hyvarinen at cyberlightning.com > > > See our > new press > release: > http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ > > www.cyberlightning.com > > > This > e-mail > and all > attached > material > are confidential > and may > contain > legally > privileged > information. > If > you are > not the > intended > recipient, > please > contact > the sender > and delete > the e-mail > from > your > system > without > producing, > distributing > or > retaining > copies > thereof. > > ... > > [Mensaje recortado] > > > > > > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching -------------- next part -------------- An HTML attachment was scrubbed... URL: From ibon.salbi at gmail.com Tue Jul 14 11:15:11 2015 From: ibon.salbi at gmail.com (Ibon Salbidegoitia) Date: Tue, 14 Jul 2015 09:15:11 +0000 Subject: [Fiware-finodex-coaching] W3DS - FIWARE In-Reply-To: <55A4B28D.6010903@eng.it> References: <55A4B28D.6010903@eng.it> Message-ID: Hi Pasquale, Maybe I am confused but as I checked on the binaries/sources of Geoserver+W3DS+PostGIS ddbb, Juha and Sami are the contact, so the problem is the calendar (summer months). Juha is the contact, so I suppose that the email you provided goes directly to him. Juha and/or Sami, I will be waiting for your reply. Best regards, Ibon 2015-07-14 6:56 GMT+00:00 Pasquale Vitale : > Hi Ibon, > please try with contact at cyberlightning.com > > Let me know > regards, > Pasquale > > > Il 13/07/2015 13:16, Ibon Salbidegoitia ha scritto: > > Hi Juha, > > I have seen from an automatic reply email that Sami is going to be on > holidays till 31st of July. Is there any other technical support who can > give me feedback about the Fiware Enabler developed by Cyberlightning? > Best regards, > > Ibon > > > 2015-07-13 11:10 GMT+00:00 Ibon Salbidegoitia : > >> Hi Sami, >> >> I haven't received reply for the issue I told you in my previous email. >> Can you please confirm me that you received? If so, can you tell me the >> situation? >> Should I put Juha in Cc for all this process? >> Thank you in advance. Best regards, >> >> Ibon >> >> >> 2015-07-01 17:20 GMT+00:00 Ibon Salbidegoitia : >> >>> Hi Sami, >>> >>> First of all, as I mentioned in a previous email, I have put in Cc our >>> Fiware Accelerator (Finodex) coaches as they requested in a meeting with >>> them to follow the situation of each project that they are supporting. >>> >>> About your previous email, the last release is working! I have test it >>> in our test server (http://151.80.143.120/GIS_4.3.3/) and the DEM works >>> with the data provided as test. >>> I have checked that the test requires the textures to have "texture" on >>> their names and "DEM" for terrain DEM. I have upload my data to test it but >>> I have the following problems: >>> >>> 1. When I preview your DEM (DEM_geotiff_terrain_EPSG3067) I can see >>> on geoserver a grayscale image on openlayers (openlayers example >>> >>> ). >>> >>> I have seen that the tiff is a float32 image in grayscale with >>> a 281.604 minimum value and 792.834 maximum value . >>> >>> I have upload a similar DEM called "DEM_ODE_terrain" that it can be >>> selected from the DEM GIS Client example (on previous link). This image is >>> also float32 tiff with a minimum value of -3.40282e+38 and maximum >>> of 1545.84, where minimum value is a NoData value as it is shown with >>> gdalinfo command: NoData Value=-3.4028234663852886e+38 >>> The TIF image I use it can be found here: >>> ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip >>> The geodesic system of this TIF is ETRS89 that correponds to SRS >>> EPSG:25830. However the preview seems to be a 0-1 grayscale image as you >>> can see here >>> (takes >>> some seconds as it is big). This could be due to the NoData values >>> that make range so big not taking into account that the data does not >>> exist. This is correct? >>> >>> 2. The Terrain texture also has been uploaded to Geoserver as can >>> be seen here >>> >>> . >>> The DEM testing client gives the oportunity to select both layers >>> mentioned (for terrain DEM + terrain texture), however nothing appears, >>> only one small gray square looking upwards (on zenith) with the camera on >>> the client as the altitudes are higher than the ones from the examples. >>> >>> So everything from test seems to work correctly, but when I introduce my >>> data, the DEM test client does not seem to work. >>> Could it be due to NoData values? Anyway, why the ortophoto inserted >>> is shown as gray layer? >>> >>> Best regards, >>> Ibon >>> >>> >>> 2015-06-30 11:33 GMT+00:00 Sami J : >>> >>>> Hi Ibon, >>>> sorry about late response. We have now made new release from both >>>> server and example client, these can be found from the forge under *MIWI-GISDataProvider >>>> 4.3.3*-release: https://forge.fiware.org/frs/?group_id=7 >>>> source code has been uploaded also to the github. >>>> >>>> Short documentation related using DEM images can be found from: >>>> http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide#World_Wind_Format_Module >>>> >>>> Installation document covers how to upload DEM image to geoserver: >>>> http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Installation_and_Administration_Guide#GeoTIFF_based_.28DEM.29_data_sets_for_elevation >>>> >>>> >>>> Regarding using latitude/longitude coordinates, I don't know if you >>>> are using them or not. I just wanted to mention this if you haven't noticed >>>> this information from the GIS GE documentation :) To elaborate further, >>>> provided GIS GE example web client has been implemented so that it works >>>> correctly only with metric coordinate system. Using lat/long data source >>>> won't work with the provided client, and that's why lat/long coordinate >>>> handling needs to be implemented by yourself. But as said, I don't know if >>>> you are using data source based in latitude/longitudes or metric >>>> coordinates. >>>> >>>> >>>> Best regards, >>>> Sami >>>> >>>> On Thu, Jun 25, 2015 at 11:53 AM, Ibon Salbidegoitia < >>>> ibon.salbi at gmail.com> wrote: >>>> >>>>> Hi Sami, >>>>> >>>>> I have a couple of things to ask. >>>>> >>>>> 1. It is great that the grayscale images for elevation is pretty >>>>> much ready. Can you tell me when do you expect to finish the test and when >>>>> I can be able to test it? >>>>> 2. About the last paragraph, I do not understand why you tell me >>>>> that lat/long is not supported. Where I have used it? Do you refer to the >>>>> bounding box of the layers I have upload? So do I have to change the SRS to >>>>> EPSG:25830 for example instead of EPSG:4326? >>>>> >>>>> Best regards, >>>>> Ibon >>>>> >>>>> >>>>> 2015-06-24 14:22 GMT+00:00 Sami J : >>>>> >>>>>> Hi Ibon, >>>>>> ok now it's clear; in a short problem is that elevation data in >>>>>> grayscale image is not yet supported by the GIS GE. >>>>>> >>>>>> The good thing is that implementation for it is pretty much ready, >>>>>> we are doing final testing for it and then documentation will be updated. >>>>>> So soon it is possible to use grayscale elevation images as for source to >>>>>> elevation data, GIS GE implementation supports same data format as SRTM >>>>>> data uses. GIS GE will send response data in octet-stream format, client >>>>>> itself needs to create 3D objects based on the octet-stream data. >>>>>> >>>>>> please note that current version of the GIS GE reference web client >>>>>> only supports metric coordinates, Lat/log is not working. I mention this >>>>>> because if you'd like to use GIS data in Lat/Log format, the client >>>>>> scenemanager logic needs to be re-implemented. >>>>>> >>>>>> Best regards, >>>>>> Sami >>>>>> >>>>>> >>>>>> On Wed, Jun 24, 2015 at 10:10 AM, Ibon Salbidegoitia < >>>>>> ibon.salbi at gmail.com> wrote: >>>>>> >>>>>>> Hi Sami, >>>>>>> >>>>>>> I have upload the ortophoto on "fiware" workspace and also texture >>>>>>> with appropriate names to be able to see them in my Client examples: >>>>>>> + >>>>>>> http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml >>>>>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml >>>>>>> >>>>>>> As you will see, selecting the terrain texture, the new layer >>>>>>> appears (surprisingly, the one of other workspace also). But if I try to >>>>>>> select the terrain layer (first box of GIS client), you will see that the >>>>>>> one uploaded with the name "ODE_test_terrain" does not appear. Maybe I >>>>>>> didn't explain correctly in my previous email, but this layer is the >>>>>>> altitude layer, the shape. So I suppose that the W3DS options have to be >>>>>>> defined, but if you access to that layer on our testing server ( >>>>>>> http://151.80.143.120:8080/geoserver . User: admin Pass: geoserver) >>>>>>> you will see that I cannot access to the W3DS tab of "ODE_test_terrain" >>>>>>> layer to make it "Active" and "Queryable" and maybe other options required >>>>>>> on the GIS client to be able to require it as the shape of the terrain. >>>>>>> >>>>>>> Which could be the problem? >>>>>>> >>>>>>> Just one more thing. I am selected on one of the FIWARE >>>>>>> accelerators (Finodex) to develop services with Fiware tools. As you >>>>>>> imagine, this enabler is one that I am using. They required me to put them >>>>>>> (fiware coaches of Finodex accelerator) in CC on this discussion emails to >>>>>>> follow the evolution of our project. So I will put them in CC on the next >>>>>>> email. I suppose there is no problem on this, is it? >>>>>>> >>>>>>> Best regards, >>>>>>> Ibon >>>>>>> >>>>>>> >>>>>>> 2015-06-23 8:38 GMT+02:00 Sami J : >>>>>>> >>>>>>>> Hi Ibon, >>>>>>>> thank you for the feedback, I need to update user guide about this >>>>>>>> issue. Textures are queried via geoserver's WMS-interface. This interface >>>>>>>> isn't related to W3DS-module and therefore there's no need >>>>>>>> to declare W3DS related options for the texture layer. So when you >>>>>>>> define texture layer which you want to use as a texture for 3D terrain, it >>>>>>>> is enough to define options under "Data"-tab. >>>>>>>> >>>>>>>> Best regards, >>>>>>>> Sami >>>>>>>> >>>>>>>> On Mon, Jun 22, 2015 at 6:21 PM, Ibon Salbidegoitia < >>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>> >>>>>>>>> Hi Sami, >>>>>>>>> >>>>>>>>> Thank you. Yes I knew that because I saw it in the JS code you >>>>>>>>> mention. >>>>>>>>> I was going to change the ortophoto and texture to workspace to >>>>>>>>> "fiware" for that reason, but being honest I didn't test it because I found >>>>>>>>> the error I described in my previous email. I mean, I was trying to access >>>>>>>>> the texture layer W3DS tab to make it "Active" and "Queryable" as required >>>>>>>>> on the wiki, so that's the reason I sent you the error, because I though >>>>>>>>> that it wouldn't be possible to go ahead without changing the texture the >>>>>>>>> configuration. >>>>>>>>> >>>>>>>>> So, if I am wrong and it is not necessary to configure the W3DS >>>>>>>>> tab, I will try it. I don't need from you to change the JS code to find >>>>>>>>> texture and photos of all the workspace. I will change the data to "fiware" >>>>>>>>> workspae. >>>>>>>>> >>>>>>>>> I will tell you if everything goes well. >>>>>>>>> Best regards, >>>>>>>>> >>>>>>>>> Ibon >>>>>>>>> >>>>>>>>> >>>>>>>>> 2015-06-22 9:05 GMT+02:00 Sami J : >>>>>>>>> >>>>>>>>>> Hi Ibon, >>>>>>>>>> nice to hear you have been able to progress in your work! >>>>>>>>>> >>>>>>>>>> Let me answer behalf Juha: Your texture data seems to be ok. In >>>>>>>>>> case you are using GIS GE reference client problem with the texture loading >>>>>>>>>> might be with the used workspace. GIS GE reference client assumes that all >>>>>>>>>> data is in "fiware"-workspace. This applies also for the textures. So >>>>>>>>>> changing texture workspace to "fiware" might solve loading problem. >>>>>>>>>> >>>>>>>>>> If you'd like to modify reference client to support also other >>>>>>>>>> workspaces, URI for texture loading is defined in the scenemngr.js >>>>>>>>>> getElements-function. You can modify URL created in there. >>>>>>>>>> >>>>>>>>>> Best regards, >>>>>>>>>> Sami >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Mon, Jun 22, 2015 at 9:05 AM, Juha Hyv?rinen < >>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ---------- Forwarded message ---------- >>>>>>>>>>> From: Ibon Salbidegoitia >>>>>>>>>>> Date: Thu, Jun 18, 2015 at 11:05 AM >>>>>>>>>>> Subject: Re: W3DS - FIWARE >>>>>>>>>>> To: Juha Hyv?rinen >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Hi Juha, >>>>>>>>>>> >>>>>>>>>>> I checked that many changes where done on the data and wiki. >>>>>>>>>>> Congratulations! Now everything is very clear! >>>>>>>>>>> >>>>>>>>>>> I write you because I have some doubts about the texture data. >>>>>>>>>>> On the wiki "User and Programmers Guide" section "3.3.3 Adding texture" the >>>>>>>>>>> last sentence says that one option is to store texture on a GeoTIFF. >>>>>>>>>>> I used the following GeoTIFF texture (MDT) data on float32 >>>>>>>>>>> format to try it. You can download it here: >>>>>>>>>>> ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip >>>>>>>>>>> >>>>>>>>>>> The file has been uploaded to Geoserver. As it does not >>>>>>>>>>> recognize the SRS, I defined whichis the EPSG:25830. >>>>>>>>>>> As it says in the Unit Testing Plan, I have to go to W3DS tab to >>>>>>>>>>> activate and make it queryable. >>>>>>>>>>> However, it returns an error on JIRA. >>>>>>>>>>> >>>>>>>>>>> You can check it in our geoserver: >>>>>>>>>>> http://151.80.143.120:8080/geoserver/ >>>>>>>>>>> + User: admin >>>>>>>>>>> + Pass: geoserver >>>>>>>>>>> >>>>>>>>>>> The GeoTIFF texture is defined on the layer "terrain" , on >>>>>>>>>>> workspace "ODE" >>>>>>>>>>> Please let me know why this option is not available. >>>>>>>>>>> Best regards, >>>>>>>>>>> >>>>>>>>>>> Ibon >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> 2015-06-02 18:20 GMT+02:00 Ibon Salbidegoitia < >>>>>>>>>>> ibon.salbi at gmail.com>: >>>>>>>>>>> >>>>>>>>>>>> Hi Juha, >>>>>>>>>>>> >>>>>>>>>>>> I have been able to run GIS Client examples: >>>>>>>>>>>> + >>>>>>>>>>>> http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml >>>>>>>>>>>> + >>>>>>>>>>>> http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml >>>>>>>>>>>> >>>>>>>>>>>> As you can see in the attached pictures, there seems to be >>>>>>>>>>>> some problems with space between layers and I cannot see the xml3d >>>>>>>>>>>> buildings on the examples. >>>>>>>>>>>> Do you know where the buildings should appear? >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Just as comment, I have found more bugs that may improve the >>>>>>>>>>>> Unit Testing Plan. I list all of them below if you are interested on >>>>>>>>>>>> changing them >>>>>>>>>>>> >>>>>>>>>>>> *On wiki*: >>>>>>>>>>>> 1.2.2.4 PostGIS connection to GeoServer >>>>>>>>>>>> + When Publish fiware_test_terrain PostGIS - PostGIS >>>>>>>>>>>> Database >>>>>>>>>>>> In "Objects Attributes" section select "name" for the >>>>>>>>>>>> "Object ID" it is not possible because only options are [elevation / geom / >>>>>>>>>>>> lod]. The documentation seems to need to select "name" when it does not >>>>>>>>>>>> exist. >>>>>>>>>>>> >>>>>>>>>>>> 1.2.3.2 terrain_texture_orto.tif and >>>>>>>>>>>> terrain_texture_raster.tif >>>>>>>>>>>> >>>>>>>>>>>> + Raster_map_image_for_terrain_texture/terrain_texture_raster.tif >>>>>>>>>>>> SRS is automatically set to EPSG:404000. Not EPSG:3067 as >>>>>>>>>>>> it is said on the wiki >>>>>>>>>>>> + Aero_photo_for_terrain_texture/terrain_texture_orto.tif >>>>>>>>>>>> SRS is automatically set to EPSG:3067. Not EPSG:404000 as >>>>>>>>>>>> it is said on the wiki >>>>>>>>>>>> >>>>>>>>>>>> *On GIS Client*: >>>>>>>>>>>> Version 4.3.2 >>>>>>>>>>>> + The both examples () have changed the script "map.js" and >>>>>>>>>>>> now it is not automatically defined "baseUrl" variable as previous version >>>>>>>>>>>> 4.2.2. It will be recommended to use the code lines: >>>>>>>>>>>> var ip = location.host; >>>>>>>>>>>> var baseUrl = "http://"+ip+"/geoserver/"; >>>>>>>>>>>> >>>>>>>>>>>> *On MIWI-GISDataProvider download section*: >>>>>>>>>>>> + Version 4.3.2 >>>>>>>>>>>> - Test assest 4.3.2 ZIP file has a space between text >>>>>>>>>>>> and version numbers -> >>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>>> - ZIP file when decompressed has a folder with a space >>>>>>>>>>>> between text ("rel") and numbers ("4.3.2") -> rel\ 4.3.2 >>>>>>>>>>>> - Subfolders of Test_assest "Building_coordinates /" and >>>>>>>>>>>> "PostGIS_database_backup /" have a space at the end of the name. >>>>>>>>>>>> + Version 4.2.2 >>>>>>>>>>>> - Subfolders of Test_assest "Building_coordinates /" >>>>>>>>>>>> and "PostGIS_database_backup /" have a space at the end of the name. >>>>>>>>>>>> >>>>>>>>>>>> Best regards, >>>>>>>>>>>> >>>>>>>>>>>> Ibon >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> 2015-06-02 11:59 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>> >>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>> >>>>>>>>>>>>> Thank you for feedback about test asset naming problems, I >>>>>>>>>>>>> wasn't aware of those and I have informed my colleague who have made those >>>>>>>>>>>>> packages. He will fix those tomorrow. >>>>>>>>>>>>> >>>>>>>>>>>>> Building coordinates are needed if you want to use external >>>>>>>>>>>>> 3D models in your application with real spatial information. For example >>>>>>>>>>>>> hand made building models placed in correct position etc. If you don't need >>>>>>>>>>>>> those then that step is optional. >>>>>>>>>>>>> >>>>>>>>>>>>> We also updated guide for database restoring and it can be >>>>>>>>>>>>> found from here: >>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan#Import_PostGIS_database_backup_with_terrain_data >>>>>>>>>>>>> >>>>>>>>>>>>> Your problem was that username in the database backup was >>>>>>>>>>>>> defined to be 'sami' and it does not exist in your system. It is fixed by >>>>>>>>>>>>> ignoring username from the database backup. >>>>>>>>>>>>> >>>>>>>>>>>>> Before restoring that database backup you should drop >>>>>>>>>>>>> fiware_test_terrain table. >>>>>>>>>>>>> >>>>>>>>>>>>> Let me know if this was helpful. >>>>>>>>>>>>> >>>>>>>>>>>>> - Juha >>>>>>>>>>>>> >>>>>>>>>>>>> On Tue, Jun 2, 2015 at 11:41 AM, Ibon Salbidegoitia < >>>>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Sorry I send previous email without finishing the email as >>>>>>>>>>>>>> error. You have below all the email. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Sorry for the delay, I was busy and these last 3 days I had >>>>>>>>>>>>>> some problems with tomcat so I decided to format everything and start from >>>>>>>>>>>>>> the beginning to know what errors are happening. >>>>>>>>>>>>>> I will try to explain cronologically all the steps and >>>>>>>>>>>>>> error/bugs found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> First of all I update git repository and change to the >>>>>>>>>>>>>> "fiware_rel_4.x" branch to create the WAR file with the maven command: mvn >>>>>>>>>>>>>> install -DdownloadSources=true -DskipTests=true -Pw3ds >>>>>>>>>>>>>> After restarting tomcat, the geoserver seems to work -> >>>>>>>>>>>>>> http://151.80.143.120:8080/geoserver (User: admin / >>>>>>>>>>>>>> Pass: geoserver) >>>>>>>>>>>>>> I did not use the WAR published, I created my own from the >>>>>>>>>>>>>> new github branch as you see. >>>>>>>>>>>>>> >>>>>>>>>>>>>> So then I decided to update the test unit plan. Here I have >>>>>>>>>>>>>> one comment just to improve in case you want. I have checked that you >>>>>>>>>>>>>> usually use "space" on folders and files which usually is no suitable. I >>>>>>>>>>>>>> refer specificly to the 4.3.2 version. >>>>>>>>>>>>>> + The ZIP file has a "space" on the name what requires to >>>>>>>>>>>>>> use ASCI character to download: wget --no-check-certificate >>>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>>>>> + When ZIP is decompressed, the name of the folder has >>>>>>>>>>>>>> also a "space": /home/UnitTestPlan/rel\ 4.3.2 >>>>>>>>>>>>>> + PostGIS database backup has also a "space" at the >>>>>>>>>>>>>> end: /home/UnitTestPlan/rel\ 4.3.2/PostGIS_database_backup\ / >>>>>>>>>>>>>> >>>>>>>>>>>>>> Any way, I continue with the database restore. On the >>>>>>>>>>>>>> PostGIS database backup, I checked on the 4.3.2 version that there are 2 >>>>>>>>>>>>>> files: building_coordinates and test_asset-terrain. >>>>>>>>>>>>>> The "building_coordinates" file appears to be a text format >>>>>>>>>>>>>> dump. So is this file necessary to upload to database? >>>>>>>>>>>>>> The "test_asset-terrain" could be uploaded to postgres with >>>>>>>>>>>>>> the following command: pg_restore -d fiware_test /home/UnitTestPlan/rel\ >>>>>>>>>>>>>> 4.3.2/PostGIS_database_backup\ /FIWARE-postgis-test_asset-terrain >>>>>>>>>>>>>> However, I receive the following errors: >>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>> pg_restore: [archiver (db)] Error while PROCESSING TOC: >>>>>>>>>>>>>> pg_restore: [archiver (db)] Error from TOC entry 184; 1259 >>>>>>>>>>>>>> 65659 TABLE fiware_test_terrain sami >>>>>>>>>>>>>> pg_restore: [archiver (db)] could not execute query: ERROR: >>>>>>>>>>>>>> role "sami" does not exist >>>>>>>>>>>>>> Command was: ALTER TABLE public.fiware_test_terrain OWNER >>>>>>>>>>>>>> TO sami; >>>>>>>>>>>>>> >>>>>>>>>>>>>> pg_restore: [archiver (db)] Error from TOC entry 183; 1259 >>>>>>>>>>>>>> 65657 SEQUENCE fiware_test_terrain_id_seq sami >>>>>>>>>>>>>> pg_restore: [archiver (db)] could not execute query: ERROR: >>>>>>>>>>>>>> role "sami" does not exist >>>>>>>>>>>>>> Command was: ALTER TABLE public.fiware_test_terrain_id_seq >>>>>>>>>>>>>> OWNER TO sami; >>>>>>>>>>>>>> >>>>>>>>>>>>>> WARNING: errors ignored on restore: 2 >>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>> >>>>>>>>>>>>>> I checked the information stored from backup on the >>>>>>>>>>>>>> database and found the following tables, which I am not sure if they are >>>>>>>>>>>>>> all or there are some missing. >>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>> List of relations >>>>>>>>>>>>>> Schema | Name | Type | Owner >>>>>>>>>>>>>> --------+----------------------------+----------+---------- >>>>>>>>>>>>>> public | fiware_test_terrain | table | postgres >>>>>>>>>>>>>> public | fiware_test_terrain_id_seq | sequence | postgres >>>>>>>>>>>>>> public | geography_columns | view | postgres >>>>>>>>>>>>>> public | geometry_columns | view | postgres >>>>>>>>>>>>>> public | raster_columns | view | postgres >>>>>>>>>>>>>> public | raster_overviews | view | postgres >>>>>>>>>>>>>> public | spatial_ref_sys | table | postgres >>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>> >>>>>>>>>>>>>> I did not continue because it seems that there are some >>>>>>>>>>>>>> errors that I should first understand and fix before continuing. >>>>>>>>>>>>>> If you need something else from my side, please let me know. >>>>>>>>>>>>>> And please, let me know if I have done something wrong. >>>>>>>>>>>>>> Thank you. Best regards, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> 2015-06-02 8:33 GMT+00:00 Ibon Salbidegoitia < >>>>>>>>>>>>>> ibon.salbi at gmail.com>: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Sorry for the delay, I was busy and these last 3 days I >>>>>>>>>>>>>>> had some problems with tomcat so I decided to format everything and start >>>>>>>>>>>>>>> from the beginning to know what errors are happening. >>>>>>>>>>>>>>> I will try to explain cronologically all the steps and >>>>>>>>>>>>>>> error/bugs found. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> First of all I update git repository and change to the >>>>>>>>>>>>>>> "fiware_rel_4.x" branch to create the WAR file with the maven command: mvn >>>>>>>>>>>>>>> install -DdownloadSources=true -DskipTests=true -Pw3ds >>>>>>>>>>>>>>> After restarting tomcat, the geoserver seems to work -> >>>>>>>>>>>>>>> http://151.80.143.120:8080/geoserver (User: admin / >>>>>>>>>>>>>>> Pass: geoserver) >>>>>>>>>>>>>>> I did not use the WAR published, I created my own from the >>>>>>>>>>>>>>> new github branch as you see. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> So then I decided to update the test unit plan. Here I >>>>>>>>>>>>>>> have one comment just to improve in case you want. I have checked that you >>>>>>>>>>>>>>> usually use "space" on folders and files which usually is no suitable. I >>>>>>>>>>>>>>> refer specificly to the 4.3.2 version. >>>>>>>>>>>>>>> + The ZIP file has a "space" on the name what requires to >>>>>>>>>>>>>>> use ASCI character to download: wget --no-check-certificate >>>>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>>>>>> + When ZIP is decompressed, the name of the folder has >>>>>>>>>>>>>>> also a "space": /home/UnitTestPlan/rel\ 4.3.2 >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> 2015-05-26 12:49 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> That problem should now be fixed, code is in the github ( >>>>>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver/tree/fiware_rel_4.x) >>>>>>>>>>>>>>>> and we have also published new war file in Fiware FusionForge ( >>>>>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1643/geoserver.war >>>>>>>>>>>>>>>> ). >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> We also updated test assets and reference client. Updated >>>>>>>>>>>>>>>> reference client is already available from the Github and test assets will >>>>>>>>>>>>>>>> be published later today or tomorrow morning to FusionForge under release >>>>>>>>>>>>>>>> 4.3.2 (https://forge.fiware.org/frs/?group_id=7). >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I hope that this release will fix problems you >>>>>>>>>>>>>>>> encountered earlier. Please report back did this solve those problems. >>>>>>>>>>>>>>>> Thank you for submitting these bug reports. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Tue, May 26, 2015 at 9:33 AM, Juha Hyv?rinen < >>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> We have looked into that problem now for couple of days >>>>>>>>>>>>>>>>> and it seems to be somehow related to Tomcat and system locale settings. We >>>>>>>>>>>>>>>>> can reproduce same problem when we deploy to a Tomcat instance while with >>>>>>>>>>>>>>>>> Jetty everything works just fine. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I'm working with the fix now, but there is also a >>>>>>>>>>>>>>>>> workaround: deploy war package to a Jetty instance. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I will notify you once I have pushed code changes to git. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Fri, May 22, 2015 at 1:08 PM, Juha Hyv?rinen < >>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I also forgot to mention that you should move to newer >>>>>>>>>>>>>>>>>> test client which we will release officially during summer, but code is >>>>>>>>>>>>>>>>>> already available from the Github: >>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/Cyber-WeX >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Client code can be found from here: >>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/Cyber-WeX/tree/master/GIS/GIS_Client_xml3d >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Fri, May 22, 2015 at 12:30 PM, Juha Hyv?rinen < >>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I have to admit that I'm clueless with that terrain >>>>>>>>>>>>>>>>>>> problem, since I couldn't replicate it. Everything seems to be right at the >>>>>>>>>>>>>>>>>>> server side but still data is somehow corrupted when it arrives to the >>>>>>>>>>>>>>>>>>> client. We have deployed that same data set without any problems to more >>>>>>>>>>>>>>>>>>> than 20 different systems by many different users during our internal >>>>>>>>>>>>>>>>>>> development and testing. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> There are still few points which you could try. >>>>>>>>>>>>>>>>>>> 1. Install newer PostGIS version for example from Ubuntu >>>>>>>>>>>>>>>>>>> repositories instead of manually build one. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> 2. Try our upcoming release of Geoserver from Github. >>>>>>>>>>>>>>>>>>> This shouldn't be difficult, since you already build your own version. >>>>>>>>>>>>>>>>>>> If you used git to clone code earlier, you only need to >>>>>>>>>>>>>>>>>>> pull new changes from the repository and change code branch from fiware to >>>>>>>>>>>>>>>>>>> fiware_rel_4.x (git pull && git checkout fiware_rel_4.x) and rebuild >>>>>>>>>>>>>>>>>>> project. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Also I created database dump from building coordinates >>>>>>>>>>>>>>>>>>> table and it's as an attachment. We will add it also to the assets and >>>>>>>>>>>>>>>>>>> update documentation once we have little spare time to do it. Table can be >>>>>>>>>>>>>>>>>>> restored with command: sudo -u postgres psql databasename < >>>>>>>>>>>>>>>>>>> path/to/the/file.sql >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Before restoring that dumb, change URLs in it to point >>>>>>>>>>>>>>>>>>> a place where you actually have that xml file. At the moment URL is >>>>>>>>>>>>>>>>>>> http://localhost/Test_asset/Building_model/building.xml >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Thu, May 21, 2015 at 1:09 PM, Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> You are right, I forgot to edit the tomcat7 default >>>>>>>>>>>>>>>>>>>> start-up configuration file. >>>>>>>>>>>>>>>>>>>> Now is using openJDK. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> 2015-05-21 9:36 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Could you restart tomcat again since it still uses >>>>>>>>>>>>>>>>>>>>> Oracle java 1.8. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Thu, May 21, 2015 at 10:57 AM, Ibon Salbidegoitia >>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I checked that tomcat was down due to low xmx size. >>>>>>>>>>>>>>>>>>>>>> I restarted and modify xmx to avoid errors. >>>>>>>>>>>>>>>>>>>>>> Asnwering to your comments: >>>>>>>>>>>>>>>>>>>>>> + Please let me know when you update the >>>>>>>>>>>>>>>>>>>>>> documentation to check importin building coordinates >>>>>>>>>>>>>>>>>>>>>> + I imported with following command of postgres: >>>>>>>>>>>>>>>>>>>>>> $ su - postgres >>>>>>>>>>>>>>>>>>>>>> $ createdb fiware_test >>>>>>>>>>>>>>>>>>>>>> $ pg_restore -d fiware_test >>>>>>>>>>>>>>>>>>>>>> ./Test_asset_3.3/PostGIS_database_backup\ /FIWARE-postgis-test_asset >>>>>>>>>>>>>>>>>>>>>> Because I am using remote server I cannot use >>>>>>>>>>>>>>>>>>>>>> pgadmin, but the import was correct without errors and I checked that the >>>>>>>>>>>>>>>>>>>>>> data was correct. >>>>>>>>>>>>>>>>>>>>>> + I am using Oracle java (1.8.0_31), so I will >>>>>>>>>>>>>>>>>>>>>> change it to openJDK7 as you recommend. Now is changed to openJDK7 to >>>>>>>>>>>>>>>>>>>>>> version 1.7.0_79 >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> As I said, the Geoserver is active, so you can >>>>>>>>>>>>>>>>>>>>>> check on it whatever you want. >>>>>>>>>>>>>>>>>>>>>> Kind regards, >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> 2015-05-21 6:56 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I was looking into those errors you reported but >>>>>>>>>>>>>>>>>>>>>>> your server went down before I could figure out any final solution. Here >>>>>>>>>>>>>>>>>>>>>>> are my thoughts so far. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I noticed that something have went wrong at least >>>>>>>>>>>>>>>>>>>>>>> with building coordinate importing and we will update documentation how to >>>>>>>>>>>>>>>>>>>>>>> import those properly. I can notice you once that is done. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I also would like to make sure that >>>>>>>>>>>>>>>>>>>>>>> fiware:fiware_test_terrain is data set provided by us and you imported it >>>>>>>>>>>>>>>>>>>>>>> to the database as instructed with pgAdmin? >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Third point: in the past I had some problems with >>>>>>>>>>>>>>>>>>>>>>> Geoserver when we used Oracle java, so please make sure that you use >>>>>>>>>>>>>>>>>>>>>>> openJDK7. You can check used Java version with commad: >>>>>>>>>>>>>>>>>>>>>>> java -version >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> result should be something similar: >>>>>>>>>>>>>>>>>>>>>>> ----------------- >>>>>>>>>>>>>>>>>>>>>>> :~$ java -version >>>>>>>>>>>>>>>>>>>>>>> java version "1.7.0_79" >>>>>>>>>>>>>>>>>>>>>>> OpenJDK Runtime Environment (IcedTea 2.5.5) >>>>>>>>>>>>>>>>>>>>>>> (7u79-2.5.5-0ubuntu0.14.04.2) >>>>>>>>>>>>>>>>>>>>>>> OpenJDK 64-Bit Server VM (build 24.79-b02, mixed >>>>>>>>>>>>>>>>>>>>>>> mode) >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> If not, change default java version with command: >>>>>>>>>>>>>>>>>>>>>>> sudo update-alternatives --config java >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Mon, May 18, 2015 at 10:34 AM, Ibon >>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> The last couple of months I have been learning >>>>>>>>>>>>>>>>>>>>>>>> and understanding all the things that we discussed 2 months ago. >>>>>>>>>>>>>>>>>>>>>>>> Once I knew how to do most of the things, I tried >>>>>>>>>>>>>>>>>>>>>>>> to do the "Unit Testing Plan" from the Wiki ( >>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan >>>>>>>>>>>>>>>>>>>>>>>> ) >>>>>>>>>>>>>>>>>>>>>>>> I have found some bugs/errors that I think they >>>>>>>>>>>>>>>>>>>>>>>> should be corrected if possible: >>>>>>>>>>>>>>>>>>>>>>>> + Section: 1.2.2.3 PostGIS connection to GeoServer >>>>>>>>>>>>>>>>>>>>>>>> + terrain_texture_raste has a EPSG:404000 SRS >>>>>>>>>>>>>>>>>>>>>>>> (set by default) >>>>>>>>>>>>>>>>>>>>>>>> + terrain_texture_orto has a EPSG:3067 SRS (set >>>>>>>>>>>>>>>>>>>>>>>> by default) >>>>>>>>>>>>>>>>>>>>>>>> + Section: 1.2.3.2 terrain_texture_orto.tif and >>>>>>>>>>>>>>>>>>>>>>>> terrain_texture_raster.tif >>>>>>>>>>>>>>>>>>>>>>>> + On building_coordinates SRS is not >>>>>>>>>>>>>>>>>>>>>>>> automatically assigned >>>>>>>>>>>>>>>>>>>>>>>> + On building_coordinates table, when SRS >>>>>>>>>>>>>>>>>>>>>>>> EPSG:3047 value is introduced manually, the "Bounding Box" values seem to >>>>>>>>>>>>>>>>>>>>>>>> be wrong assigned >>>>>>>>>>>>>>>>>>>>>>>> + Select Activate and Queryable in the W3DS >>>>>>>>>>>>>>>>>>>>>>>> Settings, it is not clear if it is for both tables >>>>>>>>>>>>>>>>>>>>>>>> + In Objects Attributes select name for the >>>>>>>>>>>>>>>>>>>>>>>> Object ID. Only for building_coordinates table, because fiware_test_terrain >>>>>>>>>>>>>>>>>>>>>>>> table has not got this Object ID. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I have follow everything sucessfully but at the >>>>>>>>>>>>>>>>>>>>>>>> end, it is not possible to see the correct result ( >>>>>>>>>>>>>>>>>>>>>>>> http://151.80.143.120/GIS/). I am not sure if it >>>>>>>>>>>>>>>>>>>>>>>> is for the "building_coordinates" bounding box values or what. >>>>>>>>>>>>>>>>>>>>>>>> You can check on Geoserver that everything is >>>>>>>>>>>>>>>>>>>>>>>> correct (http://151.80.143.120/geoserver User: >>>>>>>>>>>>>>>>>>>>>>>> admin Pass: geoserver. The server is a server to test this W3DS service >>>>>>>>>>>>>>>>>>>>>>>> only, so you can use it without any problems) >>>>>>>>>>>>>>>>>>>>>>>> So something seems that it is not correctly >>>>>>>>>>>>>>>>>>>>>>>> working. What can it be? (All the data was correctly imported to PostGIS >>>>>>>>>>>>>>>>>>>>>>>> without errors) >>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Best regards, >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> 2015-03-26 7:42 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> I have been out of office and didn't have time >>>>>>>>>>>>>>>>>>>>>>>>> to reply earlier. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> EPSG:900913 is map projection defined by Google >>>>>>>>>>>>>>>>>>>>>>>>> and it's using lat/lon coordinates. At the moment requesting data from >>>>>>>>>>>>>>>>>>>>>>>>> non-metric coordinate systems will result erroneous output. Some projection >>>>>>>>>>>>>>>>>>>>>>>>> tools may use that as a default projection if it's undefined. I suggest >>>>>>>>>>>>>>>>>>>>>>>>> that you check your projection definitions from importing code and if you >>>>>>>>>>>>>>>>>>>>>>>>> didn't set any coordinate system set one. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> I also quickly checked that one tile you >>>>>>>>>>>>>>>>>>>>>>>>> provided and there was a lot no-data values. You could probably get better >>>>>>>>>>>>>>>>>>>>>>>>> results if you select input data from area where there are actually data to >>>>>>>>>>>>>>>>>>>>>>>>> show. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Please note that only UTM coordinate systems (or >>>>>>>>>>>>>>>>>>>>>>>>> similar) are supported by W3DS module. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> For visualization you can use sample client >>>>>>>>>>>>>>>>>>>>>>>>> provided within FIWARE project. It is quite simple and you shouldn't have >>>>>>>>>>>>>>>>>>>>>>>>> any problems to understand how it does requests to the server and visualize >>>>>>>>>>>>>>>>>>>>>>>>> received 3D data. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Mar 18, 2015 at 10:11 AM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> I have been searching and found that my data is >>>>>>>>>>>>>>>>>>>>>>>>>> in EPSG:900913 and now the layer is published and I can see it. >>>>>>>>>>>>>>>>>>>>>>>>>> Is this the correct way to publish it? >>>>>>>>>>>>>>>>>>>>>>>>>> So now, I am supposed to use the 3D capabilities >>>>>>>>>>>>>>>>>>>>>>>>>> to visualize in 3D. I have checked the XML3D link that you sent me but I >>>>>>>>>>>>>>>>>>>>>>>>>> don't understand how I have to apply to visualize the layer in 3D. >>>>>>>>>>>>>>>>>>>>>>>>>> Can you please be more specific or give me some >>>>>>>>>>>>>>>>>>>>>>>>>> help? >>>>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-18 7:13 GMT+00:00 Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com>: >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> I have been able to introduce the XYZ files >>>>>>>>>>>>>>>>>>>>>>>>>>> (*.asc in my case) to the Postgre database with the PostGIS extension. >>>>>>>>>>>>>>>>>>>>>>>>>>> I am able to see the layer from the Geoserver >>>>>>>>>>>>>>>>>>>>>>>>>>> but I have some doubts about the data to be introduced that I don't know >>>>>>>>>>>>>>>>>>>>>>>>>>> how to fill when Geoserver asks for publishing the layer. >>>>>>>>>>>>>>>>>>>>>>>>>>> I have followed the following command lines to >>>>>>>>>>>>>>>>>>>>>>>>>>> introduce the data to database which I will appreciate if you can tell me >>>>>>>>>>>>>>>>>>>>>>>>>>> if they are correct. And also, I would like to know how can I publish the >>>>>>>>>>>>>>>>>>>>>>>>>>> layer because the link that you send me doesn't give me enough information >>>>>>>>>>>>>>>>>>>>>>>>>>> to be able for that. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> ============================================================================================================== >>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Download the XYZ data as *.asc file ===== >>>>>>>>>>>>>>>>>>>>>>>>>>> $ mkdir /root/data >>>>>>>>>>>>>>>>>>>>>>>>>>> $ cd /root/data >>>>>>>>>>>>>>>>>>>>>>>>>>> $ wget >>>>>>>>>>>>>>>>>>>>>>>>>>> ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT/H0037/mdt_037_1_8.zip >>>>>>>>>>>>>>>>>>>>>>>>>>> $ unzip mdt_037_1_8.zip >>>>>>>>>>>>>>>>>>>>>>>>>>> $ gdal_polygonize.py -f "ESRI Shapefile" >>>>>>>>>>>>>>>>>>>>>>>>>>> mdt_037_1_8.asc mdt_037_1_8.shp >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Create database on Postgre as postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> user ===== >>>>>>>>>>>>>>>>>>>>>>>>>>> $ su - postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres -d postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> $ create database [yourdatabase]; >>>>>>>>>>>>>>>>>>>>>>>>>>> -> CREATE DATABASE >>>>>>>>>>>>>>>>>>>>>>>>>>> $ \list >>>>>>>>>>>>>>>>>>>>>>>>>>> $ \q >>>>>>>>>>>>>>>>>>>>>>>>>>> $ psql -d [yourdatabase] -c "CREATE EXTENSION >>>>>>>>>>>>>>>>>>>>>>>>>>> postgis;" >>>>>>>>>>>>>>>>>>>>>>>>>>> -> CREATE EXTENSION >>>>>>>>>>>>>>>>>>>>>>>>>>> $ exit >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Define Postgre password ===== >>>>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> $ \password postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> $ \q >>>>>>>>>>>>>>>>>>>>>>>>>>> $ exit >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Import data with "shp2pgsql" utility of >>>>>>>>>>>>>>>>>>>>>>>>>>> postgis ( >>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.bostongis.com/pgsql2shp_shp2pgsql_quickguide.bqg) >>>>>>>>>>>>>>>>>>>>>>>>>>> ===== >>>>>>>>>>>>>>>>>>>>>>>>>>> $ /root/postgis-2.1.0/loader/shp2pgsql >>>>>>>>>>>>>>>>>>>>>>>>>>> /root/data/mdt_037_1_8.shp >sql >>>>>>>>>>>>>>>>>>>>>>>>>>> -> Shapefile type: Polygon >>>>>>>>>>>>>>>>>>>>>>>>>>> -> Postgis type: MULTIPOLYGON[2] >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Import created sql to postgre ===== >>>>>>>>>>>>>>>>>>>>>>>>>>> $ mv sql /var/lib/postgresql/ >>>>>>>>>>>>>>>>>>>>>>>>>>> $ chmod 777 /var/lib/postgresql/sql >>>>>>>>>>>>>>>>>>>>>>>>>>> $ su - postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres -d [yourdatabase] -f sql >>>>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres -d [yourdatabase] -c "\d" >>>>>>>>>>>>>>>>>>>>>>>>>>> -> List of relations >>>>>>>>>>>>>>>>>>>>>>>>>>> -> Schema | Name | Type | >>>>>>>>>>>>>>>>>>>>>>>>>>> Owner >>>>>>>>>>>>>>>>>>>>>>>>>>> -> >>>>>>>>>>>>>>>>>>>>>>>>>>> --------+---------------------+----------+---------- >>>>>>>>>>>>>>>>>>>>>>>>>>> -> public | geography_columns | view | >>>>>>>>>>>>>>>>>>>>>>>>>>> postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> -> public | geometry_columns | view | >>>>>>>>>>>>>>>>>>>>>>>>>>> postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> -> public | mdt_037_1_8 | table | >>>>>>>>>>>>>>>>>>>>>>>>>>> postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> -> public | mdt_037_1_8_gid_seq | sequence | >>>>>>>>>>>>>>>>>>>>>>>>>>> postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> -> ... >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> $ exit >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Add new workspace ===== >>>>>>>>>>>>>>>>>>>>>>>>>>> + Name: Fiware >>>>>>>>>>>>>>>>>>>>>>>>>>> + URI of name space: com.fiware >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Add new "Data store" on Geoserver ( >>>>>>>>>>>>>>>>>>>>>>>>>>> http://151.80.143.120:8080/geoserver) ===== >>>>>>>>>>>>>>>>>>>>>>>>>>> + Select the "PostGIS - PostGIS Database" >>>>>>>>>>>>>>>>>>>>>>>>>>> vectorial data >>>>>>>>>>>>>>>>>>>>>>>>>>> + Add data required: >>>>>>>>>>>>>>>>>>>>>>>>>>> + Workspace: Fiware >>>>>>>>>>>>>>>>>>>>>>>>>>> + Name of origin data: Fiware_Test1 >>>>>>>>>>>>>>>>>>>>>>>>>>> + database: fiwaretest1 >>>>>>>>>>>>>>>>>>>>>>>>>>> + host: localhost >>>>>>>>>>>>>>>>>>>>>>>>>>> + port: 5432 >>>>>>>>>>>>>>>>>>>>>>>>>>> + user: postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> + pass: postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Add new layer and make public ===== >>>>>>>>>>>>>>>>>>>>>>>>>>> + Edit layer features??? >>>>>>>>>>>>>>>>>>>>>>>>>>> + SRS? >>>>>>>>>>>>>>>>>>>>>>>>>>> + ... >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> ============================================================================================================== >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-03 13:42 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Yes, write all polygons to a single shp file >>>>>>>>>>>>>>>>>>>>>>>>>>>> or to a single table inside a database and you are good to go. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> I would recommend that you also study some >>>>>>>>>>>>>>>>>>>>>>>>>>>> basics about rendering engines and search general knowledge what data 3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> models really keeps inside them. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> In FIWARE we use XML3D as a rendering engine >>>>>>>>>>>>>>>>>>>>>>>>>>>> and all 3D models produced by GeoServer are in XML3D format. >>>>>>>>>>>>>>>>>>>>>>>>>>>> Here is one guide how to use XML3D rendering >>>>>>>>>>>>>>>>>>>>>>>>>>>> engine: >>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/xml3d/xml3d.js/wiki/The-Basics-of-XML3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Mar 3, 2015 at 2:53 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for your clarifications. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have some doubts about your comments. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> I understand how do I have to create the >>>>>>>>>>>>>>>>>>>>>>>>>>>>> polygons. I have done a python script with the for loops as you said >>>>>>>>>>>>>>>>>>>>>>>>>>>>> (attached) which creates the POLIGONZs. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have done a SHP file for each polygon, but >>>>>>>>>>>>>>>>>>>>>>>>>>>>> should I do a single SHP with all the polygons? I suppose that I should do >>>>>>>>>>>>>>>>>>>>>>>>>>>>> a single SHP because I can have many polygons if the resolution is too >>>>>>>>>>>>>>>>>>>>>>>>>>>>> high. Or this is not possible? >>>>>>>>>>>>>>>>>>>>>>>>>>>>> The procedure of writting data to database >>>>>>>>>>>>>>>>>>>>>>>>>>>>> with psycopg2 is similar, so the same >>>>>>>>>>>>>>>>>>>>>>>>>>>>> question, all polygons together is it possible? >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-03 11:35 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have just updated User and Programmers >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> guide. I hope that these tips helps you forward. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Added content: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Data generation from *.xyz file format >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Here is a small sample from source dataset: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Easting Northing Elevation >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --------------------------------- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398000.000 7542000.000 279.950 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7542000.000 279.388 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7542000.000 278.818 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398000.000 7541990.000 281.002 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541990.000 280.436 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7541990.000 279.847 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398000.000 7541980.000 282.096 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541980.000 281.539 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7541980.000 280.944 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> That data produces following 2D grid: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 2 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 | 398000.000 7542000.000 279.950 | >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7542000.000 279.388 | 398020.000 7542000.000 278.818 | >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 | 398000.000 7541990.000 281.002 | >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541990.000 280.436 | 398020.000 7541990.000 279.847 | >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 | 398000.000 7541980.000 282.096 | >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541980.000 281.539 | 398020.000 7541980.000 280.944 | >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> From that grid we can create polygons >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> representing terrain surface. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> WKT polygons generated from that dataset >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> should look like this: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398000.000 7542000.000 279.950, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7542000.000 279.388, 398010.000 7541990.000 280.436, 398000.000 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541990.000 281.002, 398000.000 7542000.000 279.950)) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398010.000 7542000.000 279.388, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7542000.000 278.818, 398020.000 7541990.000 279.847, 398010.000 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541990.000 280.436, 398010.000 7542000.000 279.388)) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398000.000 7541990.000 281.002, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541990.000 280.436, 398010.000 7541980.000 281.539, 398000.000 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541980.000 282.096, 398000.000 7541990.000 281.002)) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398010.000 7541990.000 280.436, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7541990.000 279.847, 398020.000 7541980.000 280.944, 398010.000 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541980.000 281.539, 398010.000 7541990.000 280.436)) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> NOTE: It is said in WKT specification that >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> polygons needs to be closed, meaning that start and end points are the same. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Each polygon should be written into a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PostGIS database or into a shape file. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Shapefile writing can be done for example >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with python library called pyshp ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/GeospatialPython/pyshp). >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - PostGIS can be used for example with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> psycopg2 library (http://initd.org/psycopg/). >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Depending on selected storage format choose >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> corresponding publishing steps for data publishing into a W3DS layer with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> GeoServer. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Official GeoServer guide how to publish a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> shapefile: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/stable/en/user/gettingstarted/shapefile-quickstart/index.html >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Official GeoServer guide how to publish >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> a PostGIS table: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/stable/en/user/gettingstarted/postgis-quickstart/index.html >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Adding texture >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Raster data (f.ex. ortophotos) is used as >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> terrain texture and guide how to work with rasters can be found from here: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/stable/en/user/data/raster/index.html >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Mar 2, 2015 at 6:23 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for the steps. However, I would >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> like to clarify some things to have clear what I should do. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Imagine I have the data: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> lat lon alt >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 0 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 1 5 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 2 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 0 5 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 1 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 2 15 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 0 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 1 15 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 2 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This is like a flat surface. So I have to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> create a 2D array like: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 10 15 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 5 10 15 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 5 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have never create wkt polygons in 3D, but >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> as I have seen in some websites, this could be done like this? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGON ((0 0 0, 0 1 5, 1 1 10, 1 0 5), (0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 5, 0 2 10, 1 1 10, 1 2 15), (1 0 5, 2 0 10, 1 1 10, 2 1 15), (1 1 10, 1 2 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 15, 2 1 15, 2 2 20)) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> After this, I am not sure how to upload to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> DDBB in shp because I have many files. Also, I don't know how to associate >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the ortophoto to the shapes. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Being honest, I am a little bit lost and I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> would appreciate if you can help me. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-02 7:38 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm sorry to hear that you still have >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> those problems. I'm looking into that and I will report back to you if I'm >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> able to reproduce and solve it in some environment. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> At the moment you can't use .tiff file >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> format. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Since XML3D, which we use as a rendering >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> engine, requires that rendered models consist of polygons we had to create >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> polygonal terrain from .asc point grid. In order to reduce processor loads >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> we decided that data should be stored as polygons. In that way data can be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> returned to a client without any further processing. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> We have developed proprietary importing >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> tools to support our business cases and therefore I can't provide those >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> directly to you but I can describe what we did. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Our workflow from .asc files included >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> three steps: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1. Read asc file and create 2D array from >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> it where each cell is a point from asc file >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2. Inside a for loop select four points >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from array and create wkt polygon from those points >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 3. Write just created polygon to a database >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> or to a shp file >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> When polygons are stored in a database >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you need to publish that table in GeoServer as a layer and configure it to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> use W3DS module. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I hope that this clarifies needed steps >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from source data to a production use. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Fri, Feb 27, 2015 at 8:04 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I continue trying to find my problem but >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I haven't advance :( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anyway, I don't write for that. I am >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> trying to upload xyz format data and some ortophotos to display them with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> W3DS. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have the data in *.asc files and I have >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> a TIF file with all of them merged. As the documentation ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> says that the *.shp, .dbf* and *.shx* >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> files are mandatory, I should convert all >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *.asc* to these formats? I cannot use* >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .tif*? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> As the documentation syas, I have to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> upload this files to the server and I suppose that the ortophotos also. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> However, I don't know how to display them afterwards. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Can you explain me? I am in a Fiware >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> European project and as you are the support of Fiware I hope you can help >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> me. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Best regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-24 11:58 GMT+00:00 Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have no glue why it's not loading >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> since personally I haven't ever used that module. You should read GeoServer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> startup logs and check if there are some fatal errors in service loading. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Logs should have something similar lines >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to these: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'wfs', enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'wms', enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'wcs', enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'w3ds', enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Check errors near those. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> There is also GeoServer users mail list >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and you probably could get more helpful response from there, since I'm not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> expert in that area. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Feb 24, 2015 at 1:13 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for the comments. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> About the "Importer extension" I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> downloaded the core extension for version 2.6.0 as you said because I show >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that was the version when I install it. So, can you guess the reason of the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> extension for not working. As you explained, W3DS is an isolated module, so >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> it has no sense for not working. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-24 11:08 GMT+00:00 Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Changes delivered to FIWARE are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> isolated only to W3DS module and those are written on top of the GeoServer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> version 2.6.0. Therefore you need to use extensions written for that >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> specific version. We will move to next stable version 2.7 when it is >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> released later this spring. Currently 2.7 release is in RC1 state. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Our changes are also in the official >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> GeoServer master and 2.7 branches and you could actually try to build >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> either of those and see if build problem still exists. Meanwhile I try to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> replicate your problem in a virtual machine since everything worked well in >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> every physical machines I have access to. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Feb 24, 2015 at 11:13 AM, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I continue having a failure message >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> in the same test. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have continued looking to the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> builded version (without tests as I said) and I was trying to use the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "Importer extension" installed by copying some source from this link: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/latest/en/user/extensions/importer/installing.html >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I copied the files to the folder >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ".../geoserver/src/web/app/target/geoserver/WEB-INF/lib" as it says and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> restart Geoserver, but the extension does not seems to load. Could be due >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to the Geoserver version done for fiware? Or, how could I solve the problem? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-23 11:55 GMT+00:00 Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Only difference between our work >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chains that I was able to find is that I use also clean statement in mvn >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> build command. Could you try that? If it's still not working I try to find >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> some time to reproduce problem in a clean machine. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> mvn clean install >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -DdownloadSources=true -DskipTests=false -Pw3ds >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Resulting following summary: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Reactor Summary: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................................. SUCCESS [2.088s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Core Platform Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .................................. SUCCESS [9.062s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Open Web Service Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [5.411s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Main Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................... SUCCESS [1:58.712s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Security Modules >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................ SUCCESS [0.043s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer JDBC Security Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................ SUCCESS [18.349s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer LDAP Security Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................ SUCCESS [35.825s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................... SUCCESS [1.450s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service 1.0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Module ....................... SUCCESS [18.896s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service 1.1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Module ....................... SUCCESS [19.249s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service 2.0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Module ....................... SUCCESS [46.273s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Feature Service Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................ SUCCESS [1:21.581s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Map Service Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................ SUCCESS [1:27.636s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] KML support for GeoServer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................. SUCCESS [24.646s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoWebCache (GWC) Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .............................. SUCCESS [55.551s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] REST Support Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................... SUCCESS [10.524s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] REST Configuration Service >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Module ..................... SUCCESS [54.318s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Web Modules >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................. SUCCESS [0.028s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Core UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................ SUCCESS [46.005s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] WMS UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [17.764s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GWC UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [23.123s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] WFS UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [10.234s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Demoes Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [16.390s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] WCS UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [12.849s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI Modules >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................... SUCCESS [0.037s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI Core Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [1:14.168s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI JDBC Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [50.839s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI LDAP Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [27.079s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] REST UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................ SUCCESS [10.953s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Community Space >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....................................... SUCCESS [0.027s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web 3D Service >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................ SUCCESS [4.663s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Web Application >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................. SUCCESS [3.207s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Extensions >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .................................. SUCCESS [0.083s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] BUILD SUCCESSFUL >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Total time: 14 minutes 49 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> seconds >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Finished at: Mon Feb 23 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 13:26:42 EET 2015 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Final Memory: 187M/1400M >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Feb 23, 2015 at 12:33 PM, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I followed the installation guide >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of Fiware for installation. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I used a Ubuntu 14.04 Server 64 bits >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with 4 cores, 8GB RAM and 100GB of HD. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The version of JDK (openjdk-7-jdk) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> is 7u51-2.4.6-1ubuntu4, and postgis 2.1.0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The source that I downloaded is the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> one you shared from git (git clone -b fiware >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver.git >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I followed all the commands so >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that's the reason from asking. I would appreciate if you can tell me what >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> can be different. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-20 13:03 GMT+00:00 Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> without knowledge about your >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> build system (used java version, used operating system etc.) and where you >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> downloaded sources I'm not able to help you with this problem. I just >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> tested version which we have delivered to FIWARE ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver/tree/fiware) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and at least it build without any errors in any test cases. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Also, CatalogBuilder is bit out >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of my knowledge scope. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Fri, Feb 20, 2015 at 1:18 PM, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Sorry, I forget to attach the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> log. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-20 11:17 GMT+00:00 Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> :Hi Juha,I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> have one comment about the installation. Previously when I installed the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> geoserver I didn't notice because I was building without tests.But I was >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> building geoserver with test where I found a failure >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> on:testSingleBandedCoverage(org.geoserver.catalog.impl.CatalogBuilderTest)I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> attached the log of the output for your information.How can I solve this >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> problem?Thank you in advance. Kind regards,Ibon2015-02-05 7:48 GMT+00:00 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> :Hi >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha,Thank you for the reply.I have a xyz format data also so I will try to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> test what you sent me and look for the Unit Testing Plan link you sent.If I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> have any doubt or problem I will come back to you. Thank you.Kind >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> regards,Ibon2015-02-05 7:27 GMT+01:00 Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> :Hi >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon,Data publishing is well documented in GeoServer user manual: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/2.5.x/en/user/Data >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> which we used in our development was from National Land Survey of Finland. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Source data was in -xyz-format, which contains elevation data with spatial >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> information. With this source information it is possible to generate >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> shapefile consisting polygon structure with elevation data. 2D presentation >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of the converted shapefile with elevation points is flat grid, in 3D >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> presentation each grid points are in same elevation level as in the real >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> world. Therefore this grid with elevation data can be used as source for >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> terrain presentation.You can also read user guide from: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_GuideYou >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> can find guide for setting up test setup from here: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha---------- Forwarded message ----------From: Ibon Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Date: Wed, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Feb 4, 2015 at 12:35 AMSubject: W3DS - FIWARETo: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> miika.santala at cyberlightning.comDear >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Miika,I am Ibon from Spain.I write to you because I am involved in the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> FIWARE European project. This project promote a GIS data provider with the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> W3DS for 3D visualization as the one you show on the following link: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://130.206.81.238:8080/gis_test_client/index.xhtmlI >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> contact you because a have been in contact with Jorge Gustavo, who made a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> similar use of W3DS ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.sigte.udg.edu/jornadassiglibre2012/uploads/presentaciones_12/p43.pdf) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and he told me that W3DS is now supported by you.I have followed the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> instructions of FIWARE wiki ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Installation_and_Administration_Guide) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to start using the service and everything seems to work perfectly with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Jetty.However, I would like to know how I have to store GIS data with 3D >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> information straight to GeoServer. Is there any documentation of how to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> upload this kind of information? Can you share with me any documentation >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> about it?Thank you in advance. Yours sincerely,Ibon -- Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyv?rinenSoftware EngineerCyberlightning Ltd.email. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.comSee >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/www.cyberlightning.comThis >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> e-mail and all attached material are confidential and may contain legally >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> privileged information. If you are not the intended recipient, please >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> contact the sender and delete the e-mail from your system without >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> producing, distributing or retaining copies thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> material are confidential and may contain legally privileged information. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you are not the intended recipient, please contact the sender and delete >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the e-mail from your system without producing, distributing or retaining >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> copies thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> are confidential and may contain legally privileged information. If you are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> are confidential and may contain legally privileged information. If you are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are confidential >>>>>>>>>>>>>>>>>>>>> and may contain legally privileged information. If you are not the intended >>>>>>>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> This e-mail and all attached material are confidential >>>>>>>>>>>>>>>>>>> and may contain legally privileged information. If you are not the intended >>>>>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> This e-mail and all attached material are confidential >>>>>>>>>>>>>>>>>> and may contain legally privileged information. If you are not the intended >>>>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> ... >>> >>> [Mensaje recortado] >> >> >> > > > _______________________________________________ > Fiware-finodex-coaching mailing listFiware-finodex-coaching at lists.fi-ware.orghttps://lists.fi-ware.org/listinfo/fiware-finodex-coaching > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jsanchez at asi-soft.com Wed Jul 15 09:45:29 2015 From: jsanchez at asi-soft.com (=?UTF-8?Q?Javier_S=C3=A1nchez?=) Date: Wed, 15 Jul 2015 09:45:29 +0200 Subject: [Fiware-finodex-coaching] POI Data Provider Message-ID: Hola, Estamos intentando instalar el GE ?POI Data Provider? en una instancia en el nodo Spain2 con Ubuntu Server 14.04.1 (x64). Hemos tratado de seguir la gu?a de instalaci?n y administraci?n alojada en esta direcci?n ( http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/POI_Data_Provider_-_Installation_and_Administration_Guide) pero tenemos problemas al instalar mongo por lo que veo ya que el comando indicado a continuaci?n nos dice que el fichero no existe. $ sudo touch /etc/php5/conf.d/mongo.ini Al no funcionar esto, no hemos querido continuar con la instalaci?n por si nos diera tiempo a arreglarlo antes de que el problema se complique m?s. Con esto, queremos decir que el manual deber?a especificar que no funciona para Ubuntu 14.04. ?Debemos instanciar una m?quina con Ubuntu 12.04 como dice en los requisitos m?nimos y hacer la prueba o tampoco en este caso funcionar?? Muchas gracias de antemano. -- *Javier S?nchez Hern?ndez * *Ariadna Servicios Inform?ticos * Calle Cronos 63, 4? planta. 28037 Madrid (+34) 915021490 -------------- next part -------------- An HTML attachment was scrubbed... URL: From jsanchez at asi-soft.com Wed Jul 15 09:46:13 2015 From: jsanchez at asi-soft.com (=?UTF-8?Q?Javier_S=C3=A1nchez?=) Date: Wed, 15 Jul 2015 09:46:13 +0200 Subject: [Fiware-finodex-coaching] My Applications Message-ID: Estamos queriendo dar de alta una aplicaci?n en el FIWARE Account Portal por medio del formulario de registro de aplicaciones( https://account.lab.fiware.org/idm/myApplications/create/) y en el primer paso cuando pulsamos el bot?n ?Next? nos aparece un error con la siguiente indicaci?n: *Error: *Unable to register the application. Nos parece que la causa no est? demasiado especificada y por tanto no sabemos qu? hacer para solucionarlo. Muchas gracias de antemano. -- *Javier S?nchez Hern?ndez * *Ariadna Servicios Inform?ticos * Calle Cronos 63, 4? planta. 28037 Madrid (+34) 915021490 -------------- next part -------------- An HTML attachment was scrubbed... URL: From pvitale at eng.it Wed Jul 15 09:55:03 2015 From: pvitale at eng.it (Pasquale Vitale) Date: Wed, 15 Jul 2015 09:55:03 +0200 Subject: [Fiware-finodex-coaching] POI Data Provider In-Reply-To: References: Message-ID: <55A611D7.9040906@eng.it> Hi Javier, before to use the ubuntu 12.04 please send your request to Ari Okkonen (ari.okkonen at cie.fi) and put me in CC. Thank you, Pasquale Il 15/07/2015 09:45, Javier S?nchez ha scritto: > > Hola, > > > Estamos intentando instalar el GE ?POI Data Provider? en una instancia > en el nodo Spain2 con Ubuntu Server 14.04.1 (x64). > > Hemos tratado de seguir la gu?a de instalaci?n y administraci?n > alojada en esta direcci?n > (http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/POI_Data_Provider_-_Installation_and_Administration_Guide) > pero tenemos problemas al instalar mongo por lo que veo ya que el > comando indicado a continuaci?n nos dice que el fichero no existe. > > $ sudo touch /etc/php5/conf.d/mongo.ini > > Al no funcionar esto, no hemos querido continuar con la instalaci?n > por si nos diera tiempo a arreglarlo antes de que el problema se > complique m?s. Con esto, queremos decir que el manual deber?a > especificar que no funciona para Ubuntu 14.04. ?Debemos instanciar una > m?quina con Ubuntu 12.04 como dice en los requisitos m?nimos y hacer > la prueba o tampoco en este caso funcionar?? > > Muchas gracias de antemano. > > -- > *Javier S?nchez Hern?ndez > * > *Ariadna Servicios Inform?ticos > * > Calle Cronos 63, 4? planta. 28037 Madrid > > (+34) 915021490 > > > > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching -------------- next part -------------- An HTML attachment was scrubbed... URL: From jsanchez at asi-soft.com Wed Jul 15 14:10:48 2015 From: jsanchez at asi-soft.com (=?UTF-8?Q?Javier_S=C3=A1nchez?=) Date: Wed, 15 Jul 2015 14:10:48 +0200 Subject: [Fiware-finodex-coaching] POI Data Provider Message-ID: Hola, Estamos intentando seguir la gu?a de instalaci?n de POI Data Provider ( http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/POI_Data_Provider_-_Installation_and_Administration_Guide) sobre una instancia que ejecuta Ubuntu 12.04 y nos hemos encontrado con que falta informaci?n acerca de la instalaci?n de Cors. En la gu?a se ofrece un enlace a un manual en el que no se explica que para poder a?adir las cabeceras es necesario activar el modulo de *Headers*. Para activar este m?dulo es necesario ejecutar el siguiente comando: $ a2enmod headers y posteriormente reiniciar *Apache* mediante el comando: $ service apache2 restart Adem?s, para a?adir la cabecera debe ser en el fichero *apache2.conf* Si se pudiera explicar esto en la gu?a, el resto de usuarios lo tendr?an un poco m?s f?cil para instalar Cors. Un saludo. -- *Javier S?nchez Hern?ndez * *Ariadna Servicios Inform?ticos * Calle Cronos 63, 4? planta. 28037 Madrid (+34) 915021490 -------------- next part -------------- An HTML attachment was scrubbed... URL: From pvitale at eng.it Wed Jul 15 17:10:16 2015 From: pvitale at eng.it (Pasquale Vitale) Date: Wed, 15 Jul 2015 17:10:16 +0200 Subject: [Fiware-finodex-coaching] My Applications In-Reply-To: References: Message-ID: <55A677D8.6020406@eng.it> Hi Javier I've tried and I've got the same problem: *Error: Unable to register the application.* I'll ask to Alvaro Alonso. Regards Pasquale Il 15/07/2015 09:46, Javier S?nchez ha scritto: > > Estamos queriendo dar de alta una aplicaci?n en el FIWARE Account > Portal por medio del formulario de registro de > aplicaciones(https://account.lab.fiware.org/idm/myApplications/create/) y > en el primer paso cuando pulsamos el bot?n ?Next? nos aparece un error > con la siguiente indicaci?n: > > *Error: *Unable to register the application. > > Nos parece que la causa no est? demasiado especificada y por tanto no > sabemos qu? hacer para solucionarlo. > > Muchas gracias de antemano. > > -- > *Javier S?nchez Hern?ndez > * > *Ariadna Servicios Inform?ticos > * > Calle Cronos 63, 4? planta. 28037 Madrid > > (+34) 915021490 > > > > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching -------------- next part -------------- An HTML attachment was scrubbed... URL: From pvitale at eng.it Wed Jul 15 10:10:18 2015 From: pvitale at eng.it (Pasquale Vitale) Date: Wed, 15 Jul 2015 10:10:18 +0200 Subject: [Fiware-finodex-coaching] My Applications In-Reply-To: References: Message-ID: <55A6156A.2030607@eng.it> Hi Javier I've tried and I've got the same problem: *Error: Unable to register the application.* I'll ask to Alvaro Alonso. Regards Pasquale Il 15/07/2015 09:46, Javier S?nchez ha scritto: > > Estamos queriendo dar de alta una aplicaci?n en el FIWARE Account > Portal por medio del formulario de registro de > aplicaciones(https://account.lab.fiware.org/idm/myApplications/create/) y > en el primer paso cuando pulsamos el bot?n ?Next? nos aparece un error > con la siguiente indicaci?n: > > *Error: *Unable to register the application. > > Nos parece que la causa no est? demasiado especificada y por tanto no > sabemos qu? hacer para solucionarlo. > > Muchas gracias de antemano. > > -- > *Javier S?nchez Hern?ndez > * > *Ariadna Servicios Inform?ticos > * > Calle Cronos 63, 4? planta. 28037 Madrid > > (+34) 915021490 > > > > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching -------------- next part -------------- An HTML attachment was scrubbed... URL: From jsanchez at asi-soft.com Thu Jul 16 15:31:49 2015 From: jsanchez at asi-soft.com (=?UTF-8?Q?Javier_S=C3=A1nchez?=) Date: Thu, 16 Jul 2015 15:31:49 +0200 Subject: [Fiware-finodex-coaching] Forbidden 403 - CSRF verification failed Message-ID: Hello, I'm trying to authorise an application from an Android app and I'm getting the an error message when the user introduces its data and presses the "Sign in" button. The user is redirected to https://account.lab.fiware.org/auth/login/ and I got the error shown on the screenshot. Thanks in advance. -- *Javier S?nchez Hern?ndez * *Ariadna Servicios Inform?ticos * Calle Cronos 63, 4? planta. 28037 Madrid (+34) 915021490 -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Screenshot_2015-07-16-15-28-27.png Type: image/png Size: 16054 bytes Desc: not available URL: From pvitale at eng.it Thu Jul 16 15:56:53 2015 From: pvitale at eng.it (Pasquale Vitale) Date: Thu, 16 Jul 2015 15:56:53 +0200 Subject: [Fiware-finodex-coaching] Forbidden 403 - CSRF verification failed In-Reply-To: References: Message-ID: <55A7B825.1020602@eng.it> Hi Javier, have you registered your application? Please follow the steps at this link: https://github.com/ging/fi-ware-idm/wiki/Using-the-FIWARE-LAB-instance BR, Pasquale Il 16/07/2015 15:31, Javier S?nchez ha scritto: > Hello, > > I'm trying to authorise an application from an Android app and I'm > getting the an error message when the user introduces its data and > presses the "Sign in" button. > > The user is redirected to https://account.lab.fiware.org/auth/login/ > and I got the error shown on the screenshot. > > Thanks in advance. > -- > *Javier S?nchez Hern?ndez > * > *Ariadna Servicios Inform?ticos > * > Calle Cronos 63, 4? planta. 28037 Madrid > > (+34) 915021490 > > > > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching -------------- next part -------------- An HTML attachment was scrubbed... URL: From pvitale at eng.it Fri Jul 17 09:48:55 2015 From: pvitale at eng.it (Pasquale Vitale) Date: Fri, 17 Jul 2015 09:48:55 +0200 Subject: [Fiware-finodex-coaching] POI Data Provider In-Reply-To: References: Message-ID: <55A8B367.9050305@eng.it> Hi Javier, please ask your request in english language. Anyway for technical questions, you have to ask your request to Ari Okkonen (ari.okkonen at cie.fi) and put me in CC. Best regards Pasquale Il 15/07/2015 14:10, Javier S?nchez ha scritto: > Hola, > > Estamos intentando seguir la gu?a de instalaci?n de POI Data Provider > (http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/POI_Data_Provider_-_Installation_and_Administration_Guide) > sobre una instancia que ejecuta Ubuntu 12.04 y nos hemos encontrado > con que falta informaci?n acerca de la instalaci?n de Cors. > > En la gu?a se ofrece un enlace a un manual en el que no se explica que > para poder a?adir las cabeceras es necesario activar el modulo de > /Headers/. > Para activar este m?dulo es necesario ejecutar el siguiente comando: > > $ a2enmod headers > > y posteriormente reiniciar /Apache/ mediante el comando: > > $ service apache2 restart > > Adem?s, para a?adir la cabecera debe ser en el fichero *apache2.conf* > > Si se pudiera explicar esto en la gu?a, el resto de usuarios lo > tendr?an un poco m?s f?cil para instalar Cors. > > Un saludo. > -- > *Javier S?nchez Hern?ndez > * > *Ariadna Servicios Inform?ticos > * > Calle Cronos 63, 4? planta. 28037 Madrid > > (+34) 915021490 > > > > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching -------------- next part -------------- An HTML attachment was scrubbed... URL: From resteban at asi-soft.com Fri Jul 17 09:42:54 2015 From: resteban at asi-soft.com (Roberto Esteban) Date: Fri, 17 Jul 2015 09:42:54 +0200 Subject: [Fiware-finodex-coaching] POI Data Provider Error Message-ID: Hello, I'm using the POI Data Provider generic enabler and I have followed the *Installation and Administration Guide* ( http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/POI_Data_Provider_-_Installation_and_Administration_Guide ). Everything has gone well and I have not had any failure during installation. But, when I try to test the service I get a *500 Internal Server Error*. Thanks in advance. -- Roberto Esteban Santiago Ariadna Servicios Inform?ticos Calle Cronos 63, 4? planta. 28037 Madrid (+34) 915021490 -------------- next part -------------- An HTML attachment was scrubbed... URL: From pvitale at eng.it Fri Jul 17 09:54:37 2015 From: pvitale at eng.it (Pasquale Vitale) Date: Fri, 17 Jul 2015 09:54:37 +0200 Subject: [Fiware-finodex-coaching] POI Data Provider Error In-Reply-To: References: Message-ID: <55A8B4BD.3040208@eng.it> Hi Roberto, for your technical question, you have to ask your request to Ari Okkonen (ari.okkonen at cie.fi) and put me in CC. Best regards, Pasquale Il 17/07/2015 09:42, Roberto Esteban ha scritto: > Hello, > > I'm using the POI Data Provider generic enabler and I have followed > the /Installation and Administration Guide/ > (http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/POI_Data_Provider_-_Installation_and_Administration_Guide). > > > Everything has gone well and I have not had any failure during > installation. > > But, when I try to test the service I get a *500 Internal Server Error*. > > Thanks in advance. > > -- > > Roberto Esteban Santiago > Ariadna Servicios Inform?ticos > Calle Cronos 63, 4? planta. 28037 Madrid > (+34) 915021490 > > > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching -------------- next part -------------- An HTML attachment was scrubbed... URL: From sara.garcia at samelan.com Fri Jul 17 11:12:04 2015 From: sara.garcia at samelan.com (sara.garcia at samelan.com) Date: Fri, 17 Jul 2015 11:12:04 +0200 Subject: [Fiware-finodex-coaching] Error loguin Maquina virtual Message-ID: <20150717111204.13486y5567b0jjs4@webmail.samelan.com> Buenos d?as, Estamos intentando realizar la instalaci?n de una m?quina virtual con CentOS-7x64, asignamos ip, creamos la conexi?n ssh con sus correspondientes keypair, pero a la hora de logarnos continuamente nos deniega el acceso. Las maquinas que hemos probado son las koiki y koiki1 y ambas nos dan problemas de loguin. Un saludo. From pvitale at eng.it Fri Jul 17 11:45:44 2015 From: pvitale at eng.it (Pasquale Vitale) Date: Fri, 17 Jul 2015 11:45:44 +0200 Subject: [Fiware-finodex-coaching] Error loguin Maquina virtual In-Reply-To: <20150717111204.13486y5567b0jjs4@webmail.samelan.com> References: <20150717111204.13486y5567b0jjs4@webmail.samelan.com> Message-ID: <55A8CEC8.4030306@eng.it> Hi Sara, please, could you ask your request in english? I think that you haven't set "the security groups". From the Security menu (on the left) go in the "Security Groups" tab and edit the rules for "default" security group item using the "actions" combo. Please use: - ICMP -1 for ping - TCP 22 for ssh - TCP 80 for http - TCP 443 for https You can open more ports using from port (1) to port (65535). Please let me know. Best regards Pasquale Il 17/07/2015 11:12, sara.garcia at samelan.com ha scritto: > Buenos d?as, > > Estamos intentando realizar la instalaci?n de una m?quina virtual con > CentOS-7x64, > asignamos ip, creamos la conexi?n ssh con sus correspondientes > keypair, pero a la hora de logarnos continuamente nos deniega el acceso. > > Las maquinas que hemos probado son las koiki y koiki1 y ambas nos dan > problemas de loguin. > > Un saludo. > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching > -------------- next part -------------- An HTML attachment was scrubbed... URL: From sara.garcia at samelan.com Fri Jul 17 13:20:27 2015 From: sara.garcia at samelan.com (sara.garcia at samelan.com) Date: Fri, 17 Jul 2015 13:20:27 +0200 Subject: [Fiware-finodex-coaching] Loguin denied Message-ID: <20150717132027.178338kck17wal17@webmail.samelan.com> Good Morning, We are trying to install a virtual machine with CentOS - 7x64 , assign ip, create the ssh connection with their keypair , but when we logarnos continuously denied access. The machines we tested are Koiki and koiki1 and both Loguin give us problems . Performing a new configuration with the machine koiki2 continues to give the same access problem. Can you tell us that access credentials ? A greeting. From pvitale at eng.it Fri Jul 17 17:22:06 2015 From: pvitale at eng.it (Pasquale Vitale) Date: Fri, 17 Jul 2015 17:22:06 +0200 Subject: [Fiware-finodex-coaching] Loguin denied In-Reply-To: <20150717132027.178338kck17wal17@webmail.samelan.com> References: <20150717132027.178338kck17wal17@webmail.samelan.com> Message-ID: <55A91D9E.7010306@eng.it> Hi Sara, first - you have to set "the security groups" if you have not yet done. From the Security menu (on the left) go in the "Security Groups" tab and edit the rules for "default" security group item using the "actions" combo. Please use: - ICMP -1 for ping - TCP 22 for ssh - TCP 80 for http - TCP 443 for https You can open more ports using from port (1) to port (65535). second - if you want to connect to VM via SSH then you have to use the keypair (you don't need credentials but only the keypair): ssh -i your_keypair.pem root at IP_PUBLIC For more info you can see this presentation at link http://www.slideshare.net/finodexproject/fiware-cloud-capabilitiesandsettingupyourenvironment (slides 21 for security groups and 51,52, and 53 for connection) I hope I help you. Please let me know. Best regards, Pasquale Il 17/07/2015 13:20, sara.garcia at samelan.com ha scritto: > Good Morning, > > We are trying to install a virtual machine with CentOS - 7x64 , > assign ip, create the ssh connection with their keypair , but when we > logarnos continuously denied access. > > The machines we tested are Koiki and koiki1 and both Loguin give us > problems . > > Performing a new configuration with the machine koiki2 continues to > give the same access problem. > > Can you tell us that access credentials ? > > A greeting. > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jose at secmotic.com Tue Jul 21 18:12:00 2015 From: jose at secmotic.com (=?utf-8?Q?Jose_Ben=C3=ADtez?=) Date: Tue, 21 Jul 2015 18:12:00 +0200 Subject: [Fiware-finodex-coaching] FI-LAB Snapshot unaccesible Message-ID: Hello, I am Jose Benitez, one of the developers for FINODEX012 (SAPIN Project). Today I was taking a snapshot from a machine in order to cover the next operation I was going to make, because it was quite dangerous. In fact, this operation went wrong and I was forced to go back, and I decided to recover the machine from the snapshot I just toke. I terminated the corrupt instance and when I launched the snapshot (from "Images" in FILAB, finding the name of my machine, with the correct keypair, security group, network, etc) I am not able to access it. I tried with a ssh tunnel, doing ssh from a machine in the same network which I can access, giving the machine a public IP, without results. I also tried doing ping to the machine, but it does not response, and finally I made a traceroute, and the route reach the machine, but it does not end. Any help please? Thanks in advance Jose Ben?tez Cofounder Secmotic Innovation S.L. http://www.secmotic.com -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Logo-firma.jpg Type: image/jpeg Size: 9660 bytes Desc: not available URL: From pvitale at eng.it Wed Jul 22 09:40:29 2015 From: pvitale at eng.it (Pasquale Vitale) Date: Wed, 22 Jul 2015 09:40:29 +0200 Subject: [Fiware-finodex-coaching] FI-LAB Snapshot unaccesible In-Reply-To: References: Message-ID: <55AF48ED.7040601@eng.it> Hi Jose, please send a mail to fiware-lab-help at lists.fi-ware.org including your ID, your node and so on. Best regards, Pasquale Il 21/07/2015 18:12, Jose Ben?tez ha scritto: > Hello, > > I am Jose Benitez, one of the developers for FINODEX012 (SAPIN Project). > > Today I was taking a snapshot from a machine in order to cover the > next operation I was going to make, because it was quite dangerous. In > fact, this operation went wrong and I was forced to go back, and I > decided to recover the machine from the snapshot I just toke. > > I terminated the corrupt instance and when I launched the snapshot > (from "Images" in FILAB, finding the name of my machine, with the > correct keypair, security group, network, etc) I am not able to access it. > > I tried with a ssh tunnel, doing ssh from a machine in the same > network which I can access, giving the machine a public IP, without > results. > I also tried doing ping to the machine, but it does not response, and > finally I made a traceroute, and the route reach the machine, but it > does not end. > > Any help please? > Thanks in advance > > > Jose Ben?tez > Cofounder Secmotic Innovation S.L. > http://www.secmotic.com > > > > > > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 9660 bytes Desc: not available URL: From luca.silvestri at ecogriddy.com Wed Jul 22 13:45:36 2015 From: luca.silvestri at ecogriddy.com (Luca Silvestri - Ecogriddy) Date: Wed, 22 Jul 2015 13:45:36 +0200 Subject: [Fiware-finodex-coaching] UL2.0/HTTP documentation Message-ID: Hi, in the FW catalogue the link to UL2.0 documentation https://forge.fiware.org/docman/admin/index.php?editdoc=1&docid=5084&group_id=11 doesn't work for common users. Can you provide some accessible documentation? Thanks, -- *Luca Silvestri - Founder & CEO @ Ecogriddy* -------------- next part -------------- An HTML attachment was scrubbed... URL: From pvitale at eng.it Wed Jul 22 15:29:07 2015 From: pvitale at eng.it (Pasquale Vitale) Date: Wed, 22 Jul 2015 15:29:07 +0200 Subject: [Fiware-finodex-coaching] UL2.0/HTTP documentation In-Reply-To: References: Message-ID: <55AF9AA3.1030904@eng.it> Hi Luca, you have to ask to Carlos Ralli Ucendo (carlos.ralliucendo at telefonica.com) Regards, Pasquale Il 22/07/2015 13:45, Luca Silvestri - Ecogriddy ha scritto: > Hi, > > in the FW catalogue the link to UL2.0 documentation > https://forge.fiware.org/docman/admin/index.php?editdoc=1&docid=5084&group_id=11 > > doesn't work for common users. > > Can you provide some accessible documentation? > > Thanks, > -- > *Luca Silvestri - Founder & CEO @ Ecogriddy* > > > > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching -------------- next part -------------- An HTML attachment was scrubbed... URL: From juha.hyvarinen at cyberlightning.com Mon Jul 27 07:58:58 2015 From: juha.hyvarinen at cyberlightning.com (=?UTF-8?Q?Juha_Hyv=C3=A4rinen?=) Date: Mon, 27 Jul 2015 08:58:58 +0300 Subject: [Fiware-finodex-coaching] W3DS - FIWARE In-Reply-To: References: Message-ID: Hi Ibon, I just returned from my summer vacation and I will look into that problem as soon as it's possible. - Juha On Mon, Jul 13, 2015 at 2:16 PM, Ibon Salbidegoitia wrote: > Hi Juha, > > I have seen from an automatic reply email that Sami is going to be on > holidays till 31st of July. Is there any other technical support who can > give me feedback about the Fiware Enabler developed by Cyberlightning? > Best regards, > > Ibon > > > 2015-07-13 11:10 GMT+00:00 Ibon Salbidegoitia : > >> Hi Sami, >> >> I haven't received reply for the issue I told you in my previous email. >> Can you please confirm me that you received? If so, can you tell me the >> situation? >> Should I put Juha in Cc for all this process? >> Thank you in advance. Best regards, >> >> Ibon >> >> >> 2015-07-01 17:20 GMT+00:00 Ibon Salbidegoitia : >> >>> Hi Sami, >>> >>> First of all, as I mentioned in a previous email, I have put in Cc our >>> Fiware Accelerator (Finodex) coaches as they requested in a meeting with >>> them to follow the situation of each project that they are supporting. >>> >>> About your previous email, the last release is working! I have test it >>> in our test server (http://151.80.143.120/GIS_4.3.3/) and the DEM works >>> with the data provided as test. >>> I have checked that the test requires the textures to have "texture" on >>> their names and "DEM" for terrain DEM. I have upload my data to test it but >>> I have the following problems: >>> >>> 1. When I preview your DEM (DEM_geotiff_terrain_EPSG3067) I can see >>> on geoserver a grayscale image on openlayers (openlayers example >>> >>> ). >>> >>> I have seen that the tiff is a float32 image in grayscale with >>> a 281.604 minimum value and 792.834 maximum value . >>> >>> I have upload a similar DEM called "DEM_ODE_terrain" that it can be >>> selected from the DEM GIS Client example (on previous link). This image is >>> also float32 tiff with a minimum value of -3.40282e+38 and maximum >>> of 1545.84, where minimum value is a NoData value as it is shown with >>> gdalinfo command: NoData Value=-3.4028234663852886e+38 >>> The TIF image I use it can be found here: >>> ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip >>> The geodesic system of this TIF is ETRS89 that correponds to SRS >>> EPSG:25830. However the preview seems to be a 0-1 grayscale image as you >>> can see here >>> (takes >>> some seconds as it is big). This could be due to the NoData values >>> that make range so big not taking into account that the data does not >>> exist. This is correct? >>> >>> 2. The Terrain texture also has been uploaded to Geoserver as can be >>> seen here >>> >>> . >>> The DEM testing client gives the oportunity to select both layers >>> mentioned (for terrain DEM + terrain texture), however nothing appears, >>> only one small gray square looking upwards (on zenith) with the camera on >>> the client as the altitudes are higher than the ones from the examples. >>> >>> So everything from test seems to work correctly, but when I introduce my >>> data, the DEM test client does not seem to work. >>> Could it be due to NoData values? Anyway, why the ortophoto inserted is >>> shown as gray layer? >>> >>> Best regards, >>> Ibon >>> >>> >>> 2015-06-30 11:33 GMT+00:00 Sami J : >>> >>>> Hi Ibon, >>>> sorry about late response. We have now made new release from both >>>> server and example client, these can be found from the forge under *MIWI-GISDataProvider >>>> 4.3.3*-release: https://forge.fiware.org/frs/?group_id=7 >>>> source code has been uploaded also to the github. >>>> >>>> Short documentation related using DEM images can be found from: >>>> http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide#World_Wind_Format_Module >>>> >>>> Installation document covers how to upload DEM image to geoserver: >>>> http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Installation_and_Administration_Guide#GeoTIFF_based_.28DEM.29_data_sets_for_elevation >>>> >>>> >>>> Regarding using latitude/longitude coordinates, I don't know if you are >>>> using them or not. I just wanted to mention this if you haven't noticed >>>> this information from the GIS GE documentation :) To elaborate further, >>>> provided GIS GE example web client has been implemented so that it works >>>> correctly only with metric coordinate system. Using lat/long data source >>>> won't work with the provided client, and that's why lat/long coordinate >>>> handling needs to be implemented by yourself. But as said, I don't know if >>>> you are using data source based in latitude/longitudes or metric >>>> coordinates. >>>> >>>> >>>> Best regards, >>>> Sami >>>> >>>> On Thu, Jun 25, 2015 at 11:53 AM, Ibon Salbidegoitia < >>>> ibon.salbi at gmail.com> wrote: >>>> >>>>> Hi Sami, >>>>> >>>>> I have a couple of things to ask. >>>>> >>>>> 1. It is great that the grayscale images for elevation is pretty >>>>> much ready. Can you tell me when do you expect to finish the test and when >>>>> I can be able to test it? >>>>> 2. About the last paragraph, I do not understand why you tell me >>>>> that lat/long is not supported. Where I have used it? Do you refer to the >>>>> bounding box of the layers I have upload? So do I have to change the SRS to >>>>> EPSG:25830 for example instead of EPSG:4326? >>>>> >>>>> Best regards, >>>>> Ibon >>>>> >>>>> >>>>> 2015-06-24 14:22 GMT+00:00 Sami J : >>>>> >>>>>> Hi Ibon, >>>>>> ok now it's clear; in a short problem is that elevation data in >>>>>> grayscale image is not yet supported by the GIS GE. >>>>>> >>>>>> The good thing is that implementation for it is pretty much ready, we >>>>>> are doing final testing for it and then documentation will be updated. So >>>>>> soon it is possible to use grayscale elevation images as for source to >>>>>> elevation data, GIS GE implementation supports same data format as SRTM >>>>>> data uses. GIS GE will send response data in octet-stream format, client >>>>>> itself needs to create 3D objects based on the octet-stream data. >>>>>> >>>>>> please note that current version of the GIS GE reference web client >>>>>> only supports metric coordinates, Lat/log is not working. I mention this >>>>>> because if you'd like to use GIS data in Lat/Log format, the client >>>>>> scenemanager logic needs to be re-implemented. >>>>>> >>>>>> Best regards, >>>>>> Sami >>>>>> >>>>>> >>>>>> On Wed, Jun 24, 2015 at 10:10 AM, Ibon Salbidegoitia < >>>>>> ibon.salbi at gmail.com> wrote: >>>>>> >>>>>>> Hi Sami, >>>>>>> >>>>>>> I have upload the ortophoto on "fiware" workspace and also texture >>>>>>> with appropriate names to be able to see them in my Client examples: >>>>>>> + >>>>>>> http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml >>>>>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml >>>>>>> >>>>>>> As you will see, selecting the terrain texture, the new layer >>>>>>> appears (surprisingly, the one of other workspace also). But if I try to >>>>>>> select the terrain layer (first box of GIS client), you will see that the >>>>>>> one uploaded with the name "ODE_test_terrain" does not appear. Maybe I >>>>>>> didn't explain correctly in my previous email, but this layer is the >>>>>>> altitude layer, the shape. So I suppose that the W3DS options have to be >>>>>>> defined, but if you access to that layer on our testing server ( >>>>>>> http://151.80.143.120:8080/geoserver . User: admin Pass: geoserver) >>>>>>> you will see that I cannot access to the W3DS tab of "ODE_test_terrain" >>>>>>> layer to make it "Active" and "Queryable" and maybe other options required >>>>>>> on the GIS client to be able to require it as the shape of the terrain. >>>>>>> >>>>>>> Which could be the problem? >>>>>>> >>>>>>> Just one more thing. I am selected on one of the FIWARE accelerators >>>>>>> (Finodex) to develop services with Fiware tools. As you imagine, this >>>>>>> enabler is one that I am using. They required me to put them (fiware >>>>>>> coaches of Finodex accelerator) in CC on this discussion emails to follow >>>>>>> the evolution of our project. So I will put them in CC on the next email. I >>>>>>> suppose there is no problem on this, is it? >>>>>>> >>>>>>> Best regards, >>>>>>> Ibon >>>>>>> >>>>>>> >>>>>>> 2015-06-23 8:38 GMT+02:00 Sami J : >>>>>>> >>>>>>>> Hi Ibon, >>>>>>>> thank you for the feedback, I need to update user guide about this >>>>>>>> issue. Textures are queried via geoserver's WMS-interface. This interface >>>>>>>> isn't related to W3DS-module and therefore there's no need >>>>>>>> to declare W3DS related options for the texture layer. So when you >>>>>>>> define texture layer which you want to use as a texture for 3D terrain, it >>>>>>>> is enough to define options under "Data"-tab. >>>>>>>> >>>>>>>> Best regards, >>>>>>>> Sami >>>>>>>> >>>>>>>> On Mon, Jun 22, 2015 at 6:21 PM, Ibon Salbidegoitia < >>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>> >>>>>>>>> Hi Sami, >>>>>>>>> >>>>>>>>> Thank you. Yes I knew that because I saw it in the JS code you >>>>>>>>> mention. >>>>>>>>> I was going to change the ortophoto and texture to workspace to >>>>>>>>> "fiware" for that reason, but being honest I didn't test it because I found >>>>>>>>> the error I described in my previous email. I mean, I was trying to access >>>>>>>>> the texture layer W3DS tab to make it "Active" and "Queryable" as required >>>>>>>>> on the wiki, so that's the reason I sent you the error, because I though >>>>>>>>> that it wouldn't be possible to go ahead without changing the texture the >>>>>>>>> configuration. >>>>>>>>> >>>>>>>>> So, if I am wrong and it is not necessary to configure the W3DS >>>>>>>>> tab, I will try it. I don't need from you to change the JS code to find >>>>>>>>> texture and photos of all the workspace. I will change the data to "fiware" >>>>>>>>> workspae. >>>>>>>>> >>>>>>>>> I will tell you if everything goes well. >>>>>>>>> Best regards, >>>>>>>>> >>>>>>>>> Ibon >>>>>>>>> >>>>>>>>> >>>>>>>>> 2015-06-22 9:05 GMT+02:00 Sami J : >>>>>>>>> >>>>>>>>>> Hi Ibon, >>>>>>>>>> nice to hear you have been able to progress in your work! >>>>>>>>>> >>>>>>>>>> Let me answer behalf Juha: Your texture data seems to be ok. In >>>>>>>>>> case you are using GIS GE reference client problem with the texture loading >>>>>>>>>> might be with the used workspace. GIS GE reference client assumes that all >>>>>>>>>> data is in "fiware"-workspace. This applies also for the textures. So >>>>>>>>>> changing texture workspace to "fiware" might solve loading problem. >>>>>>>>>> >>>>>>>>>> If you'd like to modify reference client to support also other >>>>>>>>>> workspaces, URI for texture loading is defined in the scenemngr.js >>>>>>>>>> getElements-function. You can modify URL created in there. >>>>>>>>>> >>>>>>>>>> Best regards, >>>>>>>>>> Sami >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Mon, Jun 22, 2015 at 9:05 AM, Juha Hyv?rinen < >>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ---------- Forwarded message ---------- >>>>>>>>>>> From: Ibon Salbidegoitia >>>>>>>>>>> Date: Thu, Jun 18, 2015 at 11:05 AM >>>>>>>>>>> Subject: Re: W3DS - FIWARE >>>>>>>>>>> To: Juha Hyv?rinen >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Hi Juha, >>>>>>>>>>> >>>>>>>>>>> I checked that many changes where done on the data and wiki. >>>>>>>>>>> Congratulations! Now everything is very clear! >>>>>>>>>>> >>>>>>>>>>> I write you because I have some doubts about the texture data. >>>>>>>>>>> On the wiki "User and Programmers Guide" section "3.3.3 Adding texture" the >>>>>>>>>>> last sentence says that one option is to store texture on a GeoTIFF. >>>>>>>>>>> I used the following GeoTIFF texture (MDT) data on float32 >>>>>>>>>>> format to try it. You can download it here: >>>>>>>>>>> ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip >>>>>>>>>>> >>>>>>>>>>> The file has been uploaded to Geoserver. As it does not >>>>>>>>>>> recognize the SRS, I defined whichis the EPSG:25830. >>>>>>>>>>> As it says in the Unit Testing Plan, I have to go to W3DS tab to >>>>>>>>>>> activate and make it queryable. >>>>>>>>>>> However, it returns an error on JIRA. >>>>>>>>>>> >>>>>>>>>>> You can check it in our geoserver: >>>>>>>>>>> http://151.80.143.120:8080/geoserver/ >>>>>>>>>>> + User: admin >>>>>>>>>>> + Pass: geoserver >>>>>>>>>>> >>>>>>>>>>> The GeoTIFF texture is defined on the layer "terrain" , on >>>>>>>>>>> workspace "ODE" >>>>>>>>>>> Please let me know why this option is not available. >>>>>>>>>>> Best regards, >>>>>>>>>>> >>>>>>>>>>> Ibon >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> 2015-06-02 18:20 GMT+02:00 Ibon Salbidegoitia < >>>>>>>>>>> ibon.salbi at gmail.com>: >>>>>>>>>>> >>>>>>>>>>>> Hi Juha, >>>>>>>>>>>> >>>>>>>>>>>> I have been able to run GIS Client examples: >>>>>>>>>>>> + >>>>>>>>>>>> http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml >>>>>>>>>>>> + >>>>>>>>>>>> http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml >>>>>>>>>>>> >>>>>>>>>>>> As you can see in the attached pictures, there seems to be some >>>>>>>>>>>> problems with space between layers and I cannot see the xml3d buildings on >>>>>>>>>>>> the examples. >>>>>>>>>>>> Do you know where the buildings should appear? >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Just as comment, I have found more bugs that may improve the >>>>>>>>>>>> Unit Testing Plan. I list all of them below if you are interested on >>>>>>>>>>>> changing them >>>>>>>>>>>> >>>>>>>>>>>> *On wiki*: >>>>>>>>>>>> 1.2.2.4 PostGIS connection to GeoServer >>>>>>>>>>>> + When Publish fiware_test_terrain PostGIS - PostGIS Database >>>>>>>>>>>> In "Objects Attributes" section select "name" for the >>>>>>>>>>>> "Object ID" it is not possible because only options are [elevation / geom / >>>>>>>>>>>> lod]. The documentation seems to need to select "name" when it does not >>>>>>>>>>>> exist. >>>>>>>>>>>> >>>>>>>>>>>> 1.2.3.2 terrain_texture_orto.tif and terrain_texture_raster.tif >>>>>>>>>>>> >>>>>>>>>>>> + Raster_map_image_for_terrain_texture/terrain_texture_raster.tif >>>>>>>>>>>> SRS is automatically set to EPSG:404000. Not EPSG:3067 as >>>>>>>>>>>> it is said on the wiki >>>>>>>>>>>> + Aero_photo_for_terrain_texture/terrain_texture_orto.tif >>>>>>>>>>>> SRS is automatically set to EPSG:3067. Not EPSG:404000 as >>>>>>>>>>>> it is said on the wiki >>>>>>>>>>>> >>>>>>>>>>>> *On GIS Client*: >>>>>>>>>>>> Version 4.3.2 >>>>>>>>>>>> + The both examples () have changed the script "map.js" and >>>>>>>>>>>> now it is not automatically defined "baseUrl" variable as previous version >>>>>>>>>>>> 4.2.2. It will be recommended to use the code lines: >>>>>>>>>>>> var ip = location.host; >>>>>>>>>>>> var baseUrl = "http://"+ip+"/geoserver/"; >>>>>>>>>>>> >>>>>>>>>>>> *On MIWI-GISDataProvider download section*: >>>>>>>>>>>> + Version 4.3.2 >>>>>>>>>>>> - Test assest 4.3.2 ZIP file has a space between text >>>>>>>>>>>> and version numbers -> >>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>>> - ZIP file when decompressed has a folder with a space >>>>>>>>>>>> between text ("rel") and numbers ("4.3.2") -> rel\ 4.3.2 >>>>>>>>>>>> - Subfolders of Test_assest "Building_coordinates /" and >>>>>>>>>>>> "PostGIS_database_backup /" have a space at the end of the name. >>>>>>>>>>>> + Version 4.2.2 >>>>>>>>>>>> - Subfolders of Test_assest "Building_coordinates /" and >>>>>>>>>>>> "PostGIS_database_backup /" have a space at the end of the name. >>>>>>>>>>>> >>>>>>>>>>>> Best regards, >>>>>>>>>>>> >>>>>>>>>>>> Ibon >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> 2015-06-02 11:59 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>> >>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>> >>>>>>>>>>>>> Thank you for feedback about test asset naming problems, I >>>>>>>>>>>>> wasn't aware of those and I have informed my colleague who have made those >>>>>>>>>>>>> packages. He will fix those tomorrow. >>>>>>>>>>>>> >>>>>>>>>>>>> Building coordinates are needed if you want to use external 3D >>>>>>>>>>>>> models in your application with real spatial information. For example hand >>>>>>>>>>>>> made building models placed in correct position etc. If you don't need >>>>>>>>>>>>> those then that step is optional. >>>>>>>>>>>>> >>>>>>>>>>>>> We also updated guide for database restoring and it can be >>>>>>>>>>>>> found from here: >>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan#Import_PostGIS_database_backup_with_terrain_data >>>>>>>>>>>>> >>>>>>>>>>>>> Your problem was that username in the database backup was >>>>>>>>>>>>> defined to be 'sami' and it does not exist in your system. It is fixed by >>>>>>>>>>>>> ignoring username from the database backup. >>>>>>>>>>>>> >>>>>>>>>>>>> Before restoring that database backup you should drop >>>>>>>>>>>>> fiware_test_terrain table. >>>>>>>>>>>>> >>>>>>>>>>>>> Let me know if this was helpful. >>>>>>>>>>>>> >>>>>>>>>>>>> - Juha >>>>>>>>>>>>> >>>>>>>>>>>>> On Tue, Jun 2, 2015 at 11:41 AM, Ibon Salbidegoitia < >>>>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Sorry I send previous email without finishing the email as >>>>>>>>>>>>>> error. You have below all the email. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Sorry for the delay, I was busy and these last 3 days I had >>>>>>>>>>>>>> some problems with tomcat so I decided to format everything and start from >>>>>>>>>>>>>> the beginning to know what errors are happening. >>>>>>>>>>>>>> I will try to explain cronologically all the steps and >>>>>>>>>>>>>> error/bugs found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> First of all I update git repository and change to the >>>>>>>>>>>>>> "fiware_rel_4.x" branch to create the WAR file with the maven command: mvn >>>>>>>>>>>>>> install -DdownloadSources=true -DskipTests=true -Pw3ds >>>>>>>>>>>>>> After restarting tomcat, the geoserver seems to work -> >>>>>>>>>>>>>> http://151.80.143.120:8080/geoserver (User: admin / >>>>>>>>>>>>>> Pass: geoserver) >>>>>>>>>>>>>> I did not use the WAR published, I created my own from the >>>>>>>>>>>>>> new github branch as you see. >>>>>>>>>>>>>> >>>>>>>>>>>>>> So then I decided to update the test unit plan. Here I have >>>>>>>>>>>>>> one comment just to improve in case you want. I have checked that you >>>>>>>>>>>>>> usually use "space" on folders and files which usually is no suitable. I >>>>>>>>>>>>>> refer specificly to the 4.3.2 version. >>>>>>>>>>>>>> + The ZIP file has a "space" on the name what requires to >>>>>>>>>>>>>> use ASCI character to download: wget --no-check-certificate >>>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>>>>> + When ZIP is decompressed, the name of the folder has >>>>>>>>>>>>>> also a "space": /home/UnitTestPlan/rel\ 4.3.2 >>>>>>>>>>>>>> + PostGIS database backup has also a "space" at the >>>>>>>>>>>>>> end: /home/UnitTestPlan/rel\ 4.3.2/PostGIS_database_backup\ / >>>>>>>>>>>>>> >>>>>>>>>>>>>> Any way, I continue with the database restore. On the PostGIS >>>>>>>>>>>>>> database backup, I checked on the 4.3.2 version that there are 2 >>>>>>>>>>>>>> files: building_coordinates and test_asset-terrain. >>>>>>>>>>>>>> The "building_coordinates" file appears to be a text format >>>>>>>>>>>>>> dump. So is this file necessary to upload to database? >>>>>>>>>>>>>> The "test_asset-terrain" could be uploaded to postgres with >>>>>>>>>>>>>> the following command: pg_restore -d fiware_test /home/UnitTestPlan/rel\ >>>>>>>>>>>>>> 4.3.2/PostGIS_database_backup\ /FIWARE-postgis-test_asset-terrain >>>>>>>>>>>>>> However, I receive the following errors: >>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>> pg_restore: [archiver (db)] Error while PROCESSING TOC: >>>>>>>>>>>>>> pg_restore: [archiver (db)] Error from TOC entry 184; 1259 >>>>>>>>>>>>>> 65659 TABLE fiware_test_terrain sami >>>>>>>>>>>>>> pg_restore: [archiver (db)] could not execute query: ERROR: >>>>>>>>>>>>>> role "sami" does not exist >>>>>>>>>>>>>> Command was: ALTER TABLE public.fiware_test_terrain OWNER TO >>>>>>>>>>>>>> sami; >>>>>>>>>>>>>> >>>>>>>>>>>>>> pg_restore: [archiver (db)] Error from TOC entry 183; 1259 >>>>>>>>>>>>>> 65657 SEQUENCE fiware_test_terrain_id_seq sami >>>>>>>>>>>>>> pg_restore: [archiver (db)] could not execute query: ERROR: >>>>>>>>>>>>>> role "sami" does not exist >>>>>>>>>>>>>> Command was: ALTER TABLE public.fiware_test_terrain_id_seq >>>>>>>>>>>>>> OWNER TO sami; >>>>>>>>>>>>>> >>>>>>>>>>>>>> WARNING: errors ignored on restore: 2 >>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>> >>>>>>>>>>>>>> I checked the information stored from backup on the database >>>>>>>>>>>>>> and found the following tables, which I am not sure if they are all or >>>>>>>>>>>>>> there are some missing. >>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>> List of relations >>>>>>>>>>>>>> Schema | Name | Type | Owner >>>>>>>>>>>>>> --------+----------------------------+----------+---------- >>>>>>>>>>>>>> public | fiware_test_terrain | table | postgres >>>>>>>>>>>>>> public | fiware_test_terrain_id_seq | sequence | postgres >>>>>>>>>>>>>> public | geography_columns | view | postgres >>>>>>>>>>>>>> public | geometry_columns | view | postgres >>>>>>>>>>>>>> public | raster_columns | view | postgres >>>>>>>>>>>>>> public | raster_overviews | view | postgres >>>>>>>>>>>>>> public | spatial_ref_sys | table | postgres >>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>> >>>>>>>>>>>>>> I did not continue because it seems that there are some >>>>>>>>>>>>>> errors that I should first understand and fix before continuing. >>>>>>>>>>>>>> If you need something else from my side, please let me know. >>>>>>>>>>>>>> And please, let me know if I have done something wrong. >>>>>>>>>>>>>> Thank you. Best regards, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> 2015-06-02 8:33 GMT+00:00 Ibon Salbidegoitia < >>>>>>>>>>>>>> ibon.salbi at gmail.com>: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Sorry for the delay, I was busy and these last 3 days I had >>>>>>>>>>>>>>> some problems with tomcat so I decided to format everything and start from >>>>>>>>>>>>>>> the beginning to know what errors are happening. >>>>>>>>>>>>>>> I will try to explain cronologically all the steps and >>>>>>>>>>>>>>> error/bugs found. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> First of all I update git repository and change to the >>>>>>>>>>>>>>> "fiware_rel_4.x" branch to create the WAR file with the maven command: mvn >>>>>>>>>>>>>>> install -DdownloadSources=true -DskipTests=true -Pw3ds >>>>>>>>>>>>>>> After restarting tomcat, the geoserver seems to work -> >>>>>>>>>>>>>>> http://151.80.143.120:8080/geoserver (User: admin / >>>>>>>>>>>>>>> Pass: geoserver) >>>>>>>>>>>>>>> I did not use the WAR published, I created my own from the >>>>>>>>>>>>>>> new github branch as you see. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> So then I decided to update the test unit plan. Here I have >>>>>>>>>>>>>>> one comment just to improve in case you want. I have checked that you >>>>>>>>>>>>>>> usually use "space" on folders and files which usually is no suitable. I >>>>>>>>>>>>>>> refer specificly to the 4.3.2 version. >>>>>>>>>>>>>>> + The ZIP file has a "space" on the name what requires to >>>>>>>>>>>>>>> use ASCI character to download: wget --no-check-certificate >>>>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>>>>>> + When ZIP is decompressed, the name of the folder has >>>>>>>>>>>>>>> also a "space": /home/UnitTestPlan/rel\ 4.3.2 >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> 2015-05-26 12:49 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> That problem should now be fixed, code is in the github ( >>>>>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver/tree/fiware_rel_4.x) >>>>>>>>>>>>>>>> and we have also published new war file in Fiware FusionForge ( >>>>>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1643/geoserver.war >>>>>>>>>>>>>>>> ). >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> We also updated test assets and reference client. Updated >>>>>>>>>>>>>>>> reference client is already available from the Github and test assets will >>>>>>>>>>>>>>>> be published later today or tomorrow morning to FusionForge under release >>>>>>>>>>>>>>>> 4.3.2 (https://forge.fiware.org/frs/?group_id=7). >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I hope that this release will fix problems you encountered >>>>>>>>>>>>>>>> earlier. Please report back did this solve those problems. Thank you for >>>>>>>>>>>>>>>> submitting these bug reports. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Tue, May 26, 2015 at 9:33 AM, Juha Hyv?rinen < >>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> We have looked into that problem now for couple of days >>>>>>>>>>>>>>>>> and it seems to be somehow related to Tomcat and system locale settings. We >>>>>>>>>>>>>>>>> can reproduce same problem when we deploy to a Tomcat instance while with >>>>>>>>>>>>>>>>> Jetty everything works just fine. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I'm working with the fix now, but there is also a >>>>>>>>>>>>>>>>> workaround: deploy war package to a Jetty instance. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I will notify you once I have pushed code changes to git. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Fri, May 22, 2015 at 1:08 PM, Juha Hyv?rinen < >>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I also forgot to mention that you should move to newer >>>>>>>>>>>>>>>>>> test client which we will release officially during summer, but code is >>>>>>>>>>>>>>>>>> already available from the Github: >>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/Cyber-WeX >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Client code can be found from here: >>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/Cyber-WeX/tree/master/GIS/GIS_Client_xml3d >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Fri, May 22, 2015 at 12:30 PM, Juha Hyv?rinen < >>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I have to admit that I'm clueless with that terrain >>>>>>>>>>>>>>>>>>> problem, since I couldn't replicate it. Everything seems to be right at the >>>>>>>>>>>>>>>>>>> server side but still data is somehow corrupted when it arrives to the >>>>>>>>>>>>>>>>>>> client. We have deployed that same data set without any problems to more >>>>>>>>>>>>>>>>>>> than 20 different systems by many different users during our internal >>>>>>>>>>>>>>>>>>> development and testing. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> There are still few points which you could try. >>>>>>>>>>>>>>>>>>> 1. Install newer PostGIS version for example from Ubuntu >>>>>>>>>>>>>>>>>>> repositories instead of manually build one. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> 2. Try our upcoming release of Geoserver from Github. >>>>>>>>>>>>>>>>>>> This shouldn't be difficult, since you already build your own version. >>>>>>>>>>>>>>>>>>> If you used git to clone code earlier, you only need to >>>>>>>>>>>>>>>>>>> pull new changes from the repository and change code branch from fiware to >>>>>>>>>>>>>>>>>>> fiware_rel_4.x (git pull && git checkout fiware_rel_4.x) and rebuild >>>>>>>>>>>>>>>>>>> project. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Also I created database dump from building coordinates >>>>>>>>>>>>>>>>>>> table and it's as an attachment. We will add it also to the assets and >>>>>>>>>>>>>>>>>>> update documentation once we have little spare time to do it. Table can be >>>>>>>>>>>>>>>>>>> restored with command: sudo -u postgres psql databasename < >>>>>>>>>>>>>>>>>>> path/to/the/file.sql >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Before restoring that dumb, change URLs in it to point a >>>>>>>>>>>>>>>>>>> place where you actually have that xml file. At the moment URL is >>>>>>>>>>>>>>>>>>> http://localhost/Test_asset/Building_model/building.xml >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Thu, May 21, 2015 at 1:09 PM, Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> You are right, I forgot to edit the tomcat7 default >>>>>>>>>>>>>>>>>>>> start-up configuration file. >>>>>>>>>>>>>>>>>>>> Now is using openJDK. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> 2015-05-21 9:36 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Could you restart tomcat again since it still uses >>>>>>>>>>>>>>>>>>>>> Oracle java 1.8. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Thu, May 21, 2015 at 10:57 AM, Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I checked that tomcat was down due to low xmx size. I >>>>>>>>>>>>>>>>>>>>>> restarted and modify xmx to avoid errors. >>>>>>>>>>>>>>>>>>>>>> Asnwering to your comments: >>>>>>>>>>>>>>>>>>>>>> + Please let me know when you update the >>>>>>>>>>>>>>>>>>>>>> documentation to check importin building coordinates >>>>>>>>>>>>>>>>>>>>>> + I imported with following command of postgres: >>>>>>>>>>>>>>>>>>>>>> $ su - postgres >>>>>>>>>>>>>>>>>>>>>> $ createdb fiware_test >>>>>>>>>>>>>>>>>>>>>> $ pg_restore -d fiware_test >>>>>>>>>>>>>>>>>>>>>> ./Test_asset_3.3/PostGIS_database_backup\ /FIWARE-postgis-test_asset >>>>>>>>>>>>>>>>>>>>>> Because I am using remote server I cannot use >>>>>>>>>>>>>>>>>>>>>> pgadmin, but the import was correct without errors and I checked that the >>>>>>>>>>>>>>>>>>>>>> data was correct. >>>>>>>>>>>>>>>>>>>>>> + I am using Oracle java (1.8.0_31), so I will >>>>>>>>>>>>>>>>>>>>>> change it to openJDK7 as you recommend. Now is changed to openJDK7 to >>>>>>>>>>>>>>>>>>>>>> version 1.7.0_79 >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> As I said, the Geoserver is active, so you can check >>>>>>>>>>>>>>>>>>>>>> on it whatever you want. >>>>>>>>>>>>>>>>>>>>>> Kind regards, >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> 2015-05-21 6:56 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I was looking into those errors you reported but >>>>>>>>>>>>>>>>>>>>>>> your server went down before I could figure out any final solution. Here >>>>>>>>>>>>>>>>>>>>>>> are my thoughts so far. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I noticed that something have went wrong at least >>>>>>>>>>>>>>>>>>>>>>> with building coordinate importing and we will update documentation how to >>>>>>>>>>>>>>>>>>>>>>> import those properly. I can notice you once that is done. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I also would like to make sure that >>>>>>>>>>>>>>>>>>>>>>> fiware:fiware_test_terrain is data set provided by us and you imported it >>>>>>>>>>>>>>>>>>>>>>> to the database as instructed with pgAdmin? >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Third point: in the past I had some problems with >>>>>>>>>>>>>>>>>>>>>>> Geoserver when we used Oracle java, so please make sure that you use >>>>>>>>>>>>>>>>>>>>>>> openJDK7. You can check used Java version with commad: >>>>>>>>>>>>>>>>>>>>>>> java -version >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> result should be something similar: >>>>>>>>>>>>>>>>>>>>>>> ----------------- >>>>>>>>>>>>>>>>>>>>>>> :~$ java -version >>>>>>>>>>>>>>>>>>>>>>> java version "1.7.0_79" >>>>>>>>>>>>>>>>>>>>>>> OpenJDK Runtime Environment (IcedTea 2.5.5) >>>>>>>>>>>>>>>>>>>>>>> (7u79-2.5.5-0ubuntu0.14.04.2) >>>>>>>>>>>>>>>>>>>>>>> OpenJDK 64-Bit Server VM (build 24.79-b02, mixed >>>>>>>>>>>>>>>>>>>>>>> mode) >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> If not, change default java version with command: >>>>>>>>>>>>>>>>>>>>>>> sudo update-alternatives --config java >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Mon, May 18, 2015 at 10:34 AM, Ibon Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> The last couple of months I have been learning and >>>>>>>>>>>>>>>>>>>>>>>> understanding all the things that we discussed 2 months ago. >>>>>>>>>>>>>>>>>>>>>>>> Once I knew how to do most of the things, I tried >>>>>>>>>>>>>>>>>>>>>>>> to do the "Unit Testing Plan" from the Wiki ( >>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan >>>>>>>>>>>>>>>>>>>>>>>> ) >>>>>>>>>>>>>>>>>>>>>>>> I have found some bugs/errors that I think they >>>>>>>>>>>>>>>>>>>>>>>> should be corrected if possible: >>>>>>>>>>>>>>>>>>>>>>>> + Section: 1.2.2.3 PostGIS connection to GeoServer >>>>>>>>>>>>>>>>>>>>>>>> + terrain_texture_raste has a EPSG:404000 SRS (set >>>>>>>>>>>>>>>>>>>>>>>> by default) >>>>>>>>>>>>>>>>>>>>>>>> + terrain_texture_orto has a EPSG:3067 SRS (set by >>>>>>>>>>>>>>>>>>>>>>>> default) >>>>>>>>>>>>>>>>>>>>>>>> + Section: 1.2.3.2 terrain_texture_orto.tif and >>>>>>>>>>>>>>>>>>>>>>>> terrain_texture_raster.tif >>>>>>>>>>>>>>>>>>>>>>>> + On building_coordinates SRS is not automatically >>>>>>>>>>>>>>>>>>>>>>>> assigned >>>>>>>>>>>>>>>>>>>>>>>> + On building_coordinates table, when SRS EPSG:3047 >>>>>>>>>>>>>>>>>>>>>>>> value is introduced manually, the "Bounding Box" values seem to be wrong >>>>>>>>>>>>>>>>>>>>>>>> assigned >>>>>>>>>>>>>>>>>>>>>>>> + Select Activate and Queryable in the W3DS >>>>>>>>>>>>>>>>>>>>>>>> Settings, it is not clear if it is for both tables >>>>>>>>>>>>>>>>>>>>>>>> + In Objects Attributes select name for the Object >>>>>>>>>>>>>>>>>>>>>>>> ID. Only for building_coordinates table, because fiware_test_terrain table >>>>>>>>>>>>>>>>>>>>>>>> has not got this Object ID. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I have follow everything sucessfully but at the >>>>>>>>>>>>>>>>>>>>>>>> end, it is not possible to see the correct result ( >>>>>>>>>>>>>>>>>>>>>>>> http://151.80.143.120/GIS/). I am not sure if it >>>>>>>>>>>>>>>>>>>>>>>> is for the "building_coordinates" bounding box values or what. >>>>>>>>>>>>>>>>>>>>>>>> You can check on Geoserver that everything is >>>>>>>>>>>>>>>>>>>>>>>> correct (http://151.80.143.120/geoserver User: >>>>>>>>>>>>>>>>>>>>>>>> admin Pass: geoserver. The server is a server to test this W3DS service >>>>>>>>>>>>>>>>>>>>>>>> only, so you can use it without any problems) >>>>>>>>>>>>>>>>>>>>>>>> So something seems that it is not correctly >>>>>>>>>>>>>>>>>>>>>>>> working. What can it be? (All the data was correctly imported to PostGIS >>>>>>>>>>>>>>>>>>>>>>>> without errors) >>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Best regards, >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> 2015-03-26 7:42 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> I have been out of office and didn't have time to >>>>>>>>>>>>>>>>>>>>>>>>> reply earlier. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> EPSG:900913 is map projection defined by Google >>>>>>>>>>>>>>>>>>>>>>>>> and it's using lat/lon coordinates. At the moment requesting data from >>>>>>>>>>>>>>>>>>>>>>>>> non-metric coordinate systems will result erroneous output. Some projection >>>>>>>>>>>>>>>>>>>>>>>>> tools may use that as a default projection if it's undefined. I suggest >>>>>>>>>>>>>>>>>>>>>>>>> that you check your projection definitions from importing code and if you >>>>>>>>>>>>>>>>>>>>>>>>> didn't set any coordinate system set one. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> I also quickly checked that one tile you provided >>>>>>>>>>>>>>>>>>>>>>>>> and there was a lot no-data values. You could probably get better results >>>>>>>>>>>>>>>>>>>>>>>>> if you select input data from area where there are actually data to show. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Please note that only UTM coordinate systems (or >>>>>>>>>>>>>>>>>>>>>>>>> similar) are supported by W3DS module. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> For visualization you can use sample client >>>>>>>>>>>>>>>>>>>>>>>>> provided within FIWARE project. It is quite simple and you shouldn't have >>>>>>>>>>>>>>>>>>>>>>>>> any problems to understand how it does requests to the server and visualize >>>>>>>>>>>>>>>>>>>>>>>>> received 3D data. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Mar 18, 2015 at 10:11 AM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> I have been searching and found that my data is >>>>>>>>>>>>>>>>>>>>>>>>>> in EPSG:900913 and now the layer is published and I can see it. >>>>>>>>>>>>>>>>>>>>>>>>>> Is this the correct way to publish it? >>>>>>>>>>>>>>>>>>>>>>>>>> So now, I am supposed to use the 3D capabilities >>>>>>>>>>>>>>>>>>>>>>>>>> to visualize in 3D. I have checked the XML3D link that you sent me but I >>>>>>>>>>>>>>>>>>>>>>>>>> don't understand how I have to apply to visualize the layer in 3D. >>>>>>>>>>>>>>>>>>>>>>>>>> Can you please be more specific or give me some >>>>>>>>>>>>>>>>>>>>>>>>>> help? >>>>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-18 7:13 GMT+00:00 Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com>: >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> I have been able to introduce the XYZ files >>>>>>>>>>>>>>>>>>>>>>>>>>> (*.asc in my case) to the Postgre database with the PostGIS extension. >>>>>>>>>>>>>>>>>>>>>>>>>>> I am able to see the layer from the Geoserver >>>>>>>>>>>>>>>>>>>>>>>>>>> but I have some doubts about the data to be introduced that I don't know >>>>>>>>>>>>>>>>>>>>>>>>>>> how to fill when Geoserver asks for publishing the layer. >>>>>>>>>>>>>>>>>>>>>>>>>>> I have followed the following command lines to >>>>>>>>>>>>>>>>>>>>>>>>>>> introduce the data to database which I will appreciate if you can tell me >>>>>>>>>>>>>>>>>>>>>>>>>>> if they are correct. And also, I would like to know how can I publish the >>>>>>>>>>>>>>>>>>>>>>>>>>> layer because the link that you send me doesn't give me enough information >>>>>>>>>>>>>>>>>>>>>>>>>>> to be able for that. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> ============================================================================================================== >>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Download the XYZ data as *.asc file ===== >>>>>>>>>>>>>>>>>>>>>>>>>>> $ mkdir /root/data >>>>>>>>>>>>>>>>>>>>>>>>>>> $ cd /root/data >>>>>>>>>>>>>>>>>>>>>>>>>>> $ wget >>>>>>>>>>>>>>>>>>>>>>>>>>> ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT/H0037/mdt_037_1_8.zip >>>>>>>>>>>>>>>>>>>>>>>>>>> $ unzip mdt_037_1_8.zip >>>>>>>>>>>>>>>>>>>>>>>>>>> $ gdal_polygonize.py -f "ESRI Shapefile" >>>>>>>>>>>>>>>>>>>>>>>>>>> mdt_037_1_8.asc mdt_037_1_8.shp >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Create database on Postgre as postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> user ===== >>>>>>>>>>>>>>>>>>>>>>>>>>> $ su - postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres -d postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> $ create database [yourdatabase]; >>>>>>>>>>>>>>>>>>>>>>>>>>> -> CREATE DATABASE >>>>>>>>>>>>>>>>>>>>>>>>>>> $ \list >>>>>>>>>>>>>>>>>>>>>>>>>>> $ \q >>>>>>>>>>>>>>>>>>>>>>>>>>> $ psql -d [yourdatabase] -c "CREATE EXTENSION >>>>>>>>>>>>>>>>>>>>>>>>>>> postgis;" >>>>>>>>>>>>>>>>>>>>>>>>>>> -> CREATE EXTENSION >>>>>>>>>>>>>>>>>>>>>>>>>>> $ exit >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Define Postgre password ===== >>>>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> $ \password postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> $ \q >>>>>>>>>>>>>>>>>>>>>>>>>>> $ exit >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Import data with "shp2pgsql" utility of >>>>>>>>>>>>>>>>>>>>>>>>>>> postgis ( >>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.bostongis.com/pgsql2shp_shp2pgsql_quickguide.bqg) >>>>>>>>>>>>>>>>>>>>>>>>>>> ===== >>>>>>>>>>>>>>>>>>>>>>>>>>> $ /root/postgis-2.1.0/loader/shp2pgsql >>>>>>>>>>>>>>>>>>>>>>>>>>> /root/data/mdt_037_1_8.shp >sql >>>>>>>>>>>>>>>>>>>>>>>>>>> -> Shapefile type: Polygon >>>>>>>>>>>>>>>>>>>>>>>>>>> -> Postgis type: MULTIPOLYGON[2] >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Import created sql to postgre ===== >>>>>>>>>>>>>>>>>>>>>>>>>>> $ mv sql /var/lib/postgresql/ >>>>>>>>>>>>>>>>>>>>>>>>>>> $ chmod 777 /var/lib/postgresql/sql >>>>>>>>>>>>>>>>>>>>>>>>>>> $ su - postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres -d [yourdatabase] -f sql >>>>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres -d [yourdatabase] -c "\d" >>>>>>>>>>>>>>>>>>>>>>>>>>> -> List of relations >>>>>>>>>>>>>>>>>>>>>>>>>>> -> Schema | Name | Type | >>>>>>>>>>>>>>>>>>>>>>>>>>> Owner >>>>>>>>>>>>>>>>>>>>>>>>>>> -> >>>>>>>>>>>>>>>>>>>>>>>>>>> --------+---------------------+----------+---------- >>>>>>>>>>>>>>>>>>>>>>>>>>> -> public | geography_columns | view | >>>>>>>>>>>>>>>>>>>>>>>>>>> postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> -> public | geometry_columns | view | >>>>>>>>>>>>>>>>>>>>>>>>>>> postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> -> public | mdt_037_1_8 | table | >>>>>>>>>>>>>>>>>>>>>>>>>>> postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> -> public | mdt_037_1_8_gid_seq | sequence | >>>>>>>>>>>>>>>>>>>>>>>>>>> postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> -> ... >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> $ exit >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Add new workspace ===== >>>>>>>>>>>>>>>>>>>>>>>>>>> + Name: Fiware >>>>>>>>>>>>>>>>>>>>>>>>>>> + URI of name space: com.fiware >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Add new "Data store" on Geoserver ( >>>>>>>>>>>>>>>>>>>>>>>>>>> http://151.80.143.120:8080/geoserver) ===== >>>>>>>>>>>>>>>>>>>>>>>>>>> + Select the "PostGIS - PostGIS Database" >>>>>>>>>>>>>>>>>>>>>>>>>>> vectorial data >>>>>>>>>>>>>>>>>>>>>>>>>>> + Add data required: >>>>>>>>>>>>>>>>>>>>>>>>>>> + Workspace: Fiware >>>>>>>>>>>>>>>>>>>>>>>>>>> + Name of origin data: Fiware_Test1 >>>>>>>>>>>>>>>>>>>>>>>>>>> + database: fiwaretest1 >>>>>>>>>>>>>>>>>>>>>>>>>>> + host: localhost >>>>>>>>>>>>>>>>>>>>>>>>>>> + port: 5432 >>>>>>>>>>>>>>>>>>>>>>>>>>> + user: postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> + pass: postgres >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Add new layer and make public ===== >>>>>>>>>>>>>>>>>>>>>>>>>>> + Edit layer features??? >>>>>>>>>>>>>>>>>>>>>>>>>>> + SRS? >>>>>>>>>>>>>>>>>>>>>>>>>>> + ... >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> ============================================================================================================== >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-03 13:42 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Yes, write all polygons to a single shp file or >>>>>>>>>>>>>>>>>>>>>>>>>>>> to a single table inside a database and you are good to go. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> I would recommend that you also study some >>>>>>>>>>>>>>>>>>>>>>>>>>>> basics about rendering engines and search general knowledge what data 3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> models really keeps inside them. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> In FIWARE we use XML3D as a rendering engine >>>>>>>>>>>>>>>>>>>>>>>>>>>> and all 3D models produced by GeoServer are in XML3D format. >>>>>>>>>>>>>>>>>>>>>>>>>>>> Here is one guide how to use XML3D rendering >>>>>>>>>>>>>>>>>>>>>>>>>>>> engine: >>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/xml3d/xml3d.js/wiki/The-Basics-of-XML3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Mar 3, 2015 at 2:53 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for your clarifications. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have some doubts about your comments. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> I understand how do I have to create the >>>>>>>>>>>>>>>>>>>>>>>>>>>>> polygons. I have done a python script with the for loops as you said >>>>>>>>>>>>>>>>>>>>>>>>>>>>> (attached) which creates the POLIGONZs. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have done a SHP file for each polygon, but >>>>>>>>>>>>>>>>>>>>>>>>>>>>> should I do a single SHP with all the polygons? I suppose that I should do >>>>>>>>>>>>>>>>>>>>>>>>>>>>> a single SHP because I can have many polygons if the resolution is too >>>>>>>>>>>>>>>>>>>>>>>>>>>>> high. Or this is not possible? >>>>>>>>>>>>>>>>>>>>>>>>>>>>> The procedure of writting data to database >>>>>>>>>>>>>>>>>>>>>>>>>>>>> with psycopg2 is similar, so the same >>>>>>>>>>>>>>>>>>>>>>>>>>>>> question, all polygons together is it possible? >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-03 11:35 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have just updated User and Programmers >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> guide. I hope that these tips helps you forward. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Added content: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Data generation from *.xyz file format >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Here is a small sample from source dataset: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Easting Northing Elevation >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --------------------------------- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398000.000 7542000.000 279.950 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7542000.000 279.388 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7542000.000 278.818 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398000.000 7541990.000 281.002 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541990.000 280.436 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7541990.000 279.847 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398000.000 7541980.000 282.096 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541980.000 281.539 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7541980.000 280.944 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> That data produces following 2D grid: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 2 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 | 398000.000 7542000.000 279.950 | >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7542000.000 279.388 | 398020.000 7542000.000 278.818 | >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 | 398000.000 7541990.000 281.002 | >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541990.000 280.436 | 398020.000 7541990.000 279.847 | >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 | 398000.000 7541980.000 282.096 | >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541980.000 281.539 | 398020.000 7541980.000 280.944 | >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------| >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> From that grid we can create polygons >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> representing terrain surface. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> WKT polygons generated from that dataset >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> should look like this: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398000.000 7542000.000 279.950, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7542000.000 279.388, 398010.000 7541990.000 280.436, 398000.000 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541990.000 281.002, 398000.000 7542000.000 279.950)) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398010.000 7542000.000 279.388, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7542000.000 278.818, 398020.000 7541990.000 279.847, 398010.000 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541990.000 280.436, 398010.000 7542000.000 279.388)) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398000.000 7541990.000 281.002, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541990.000 280.436, 398010.000 7541980.000 281.539, 398000.000 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541980.000 282.096, 398000.000 7541990.000 281.002)) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398010.000 7541990.000 280.436, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7541990.000 279.847, 398020.000 7541980.000 280.944, 398010.000 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541980.000 281.539, 398010.000 7541990.000 280.436)) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> NOTE: It is said in WKT specification that >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> polygons needs to be closed, meaning that start and end points are the same. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Each polygon should be written into a PostGIS >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> database or into a shape file. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Shapefile writing can be done for example >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with python library called pyshp ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/GeospatialPython/pyshp). >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - PostGIS can be used for example with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> psycopg2 library (http://initd.org/psycopg/). >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Depending on selected storage format choose >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> corresponding publishing steps for data publishing into a W3DS layer with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> GeoServer. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Official GeoServer guide how to publish a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> shapefile: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/stable/en/user/gettingstarted/shapefile-quickstart/index.html >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Official GeoServer guide how to publish a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PostGIS table: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/stable/en/user/gettingstarted/postgis-quickstart/index.html >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Adding texture >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Raster data (f.ex. ortophotos) is used as >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> terrain texture and guide how to work with rasters can be found from here: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/stable/en/user/data/raster/index.html >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Mar 2, 2015 at 6:23 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for the steps. However, I would >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> like to clarify some things to have clear what I should do. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Imagine I have the data: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> lat lon alt >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 0 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 1 5 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 2 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 0 5 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 1 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 2 15 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 0 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 1 15 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 2 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This is like a flat surface. So I have to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> create a 2D array like: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 10 15 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 5 10 15 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 5 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have never create wkt polygons in 3D, but >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> as I have seen in some websites, this could be done like this? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGON ((0 0 0, 0 1 5, 1 1 10, 1 0 5), (0 1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 5, 0 2 10, 1 1 10, 1 2 15), (1 0 5, 2 0 10, 1 1 10, 2 1 15), (1 1 10, 1 2 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 15, 2 1 15, 2 2 20)) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> After this, I am not sure how to upload to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> DDBB in shp because I have many files. Also, I don't know how to associate >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the ortophoto to the shapes. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Being honest, I am a little bit lost and I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> would appreciate if you can help me. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-02 7:38 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm sorry to hear that you still have those >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> problems. I'm looking into that and I will report back to you if I'm able >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to reproduce and solve it in some environment. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> At the moment you can't use .tiff file >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> format. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Since XML3D, which we use as a rendering >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> engine, requires that rendered models consist of polygons we had to create >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> polygonal terrain from .asc point grid. In order to reduce processor loads >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> we decided that data should be stored as polygons. In that way data can be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> returned to a client without any further processing. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> We have developed proprietary importing >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> tools to support our business cases and therefore I can't provide those >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> directly to you but I can describe what we did. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Our workflow from .asc files included three >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> steps: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1. Read asc file and create 2D array from >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> it where each cell is a point from asc file >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2. Inside a for loop select four points >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from array and create wkt polygon from those points >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 3. Write just created polygon to a database >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> or to a shp file >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> When polygons are stored in a database you >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> need to publish that table in GeoServer as a layer and configure it to use >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> W3DS module. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I hope that this clarifies needed steps >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from source data to a production use. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Fri, Feb 27, 2015 at 8:04 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I continue trying to find my problem but I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> haven't advance :( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anyway, I don't write for that. I am >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> trying to upload xyz format data and some ortophotos to display them with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> W3DS. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have the data in *.asc files and I have >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> a TIF file with all of them merged. As the documentation ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> says that the *.shp, .dbf* and *.shx* >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> files are mandatory, I should convert all >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *.asc* to these formats? I cannot use* >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .tif*? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> As the documentation syas, I have to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> upload this files to the server and I suppose that the ortophotos also. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> However, I don't know how to display them afterwards. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Can you explain me? I am in a Fiware >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> European project and as you are the support of Fiware I hope you can help >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> me. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Best regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-24 11:58 GMT+00:00 Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> : >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have no glue why it's not loading since >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> personally I haven't ever used that module. You should read GeoServer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> startup logs and check if there are some fatal errors in service loading. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Logs should have something similar lines >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to these: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'wfs', enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'wms', enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'wcs', enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'w3ds', enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Check errors near those. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> There is also GeoServer users mail list >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and you probably could get more helpful response from there, since I'm not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> expert in that area. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Feb 24, 2015 at 1:13 PM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for the comments. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> About the "Importer extension" I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> downloaded the core extension for version 2.6.0 as you said because I show >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that was the version when I install it. So, can you guess the reason of the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> extension for not working. As you explained, W3DS is an isolated module, so >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> it has no sense for not working. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-24 11:08 GMT+00:00 Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Changes delivered to FIWARE are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> isolated only to W3DS module and those are written on top of the GeoServer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> version 2.6.0. Therefore you need to use extensions written for that >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> specific version. We will move to next stable version 2.7 when it is >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> released later this spring. Currently 2.7 release is in RC1 state. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Our changes are also in the official >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> GeoServer master and 2.7 branches and you could actually try to build >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> either of those and see if build problem still exists. Meanwhile I try to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> replicate your problem in a virtual machine since everything worked well in >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> every physical machines I have access to. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Feb 24, 2015 at 11:13 AM, Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I continue having a failure message in >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the same test. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have continued looking to the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> builded version (without tests as I said) and I was trying to use the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "Importer extension" installed by copying some source from this link: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/latest/en/user/extensions/importer/installing.html >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I copied the files to the folder >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ".../geoserver/src/web/app/target/geoserver/WEB-INF/lib" as it says and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> restart Geoserver, but the extension does not seems to load. Could be due >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to the Geoserver version done for fiware? Or, how could I solve the problem? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-23 11:55 GMT+00:00 Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Only difference between our work >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chains that I was able to find is that I use also clean statement in mvn >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> build command. Could you try that? If it's still not working I try to find >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> some time to reproduce problem in a clean machine. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> mvn clean install >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -DdownloadSources=true -DskipTests=false -Pw3ds >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Resulting following summary: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Reactor Summary: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................................. SUCCESS [2.088s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Core Platform Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .................................. SUCCESS [9.062s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Open Web Service Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [5.411s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Main Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................... SUCCESS [1:58.712s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Security Modules >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................ SUCCESS [0.043s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer JDBC Security Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................ SUCCESS [18.349s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer LDAP Security Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................ SUCCESS [35.825s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................... SUCCESS [1.450s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service 1.0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Module ....................... SUCCESS [18.896s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service 1.1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Module ....................... SUCCESS [19.249s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service 2.0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Module ....................... SUCCESS [46.273s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Feature Service Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................ SUCCESS [1:21.581s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Map Service Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................ SUCCESS [1:27.636s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] KML support for GeoServer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................. SUCCESS [24.646s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoWebCache (GWC) Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .............................. SUCCESS [55.551s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] REST Support Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................... SUCCESS [10.524s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] REST Configuration Service >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Module ..................... SUCCESS [54.318s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Web Modules >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................. SUCCESS [0.028s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Core UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................ SUCCESS [46.005s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] WMS UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [17.764s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GWC UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [23.123s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] WFS UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [10.234s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Demoes Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [16.390s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] WCS UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [12.849s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI Modules >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................... SUCCESS [0.037s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI Core Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [1:14.168s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI JDBC Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [50.839s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI LDAP Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [27.079s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] REST UI Module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................ SUCCESS [10.953s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Community Space >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....................................... SUCCESS [0.027s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web 3D Service >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................ SUCCESS [4.663s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Web Application >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................. SUCCESS [3.207s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Extensions >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .................................. SUCCESS [0.083s] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] BUILD SUCCESSFUL >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Total time: 14 minutes 49 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> seconds >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Finished at: Mon Feb 23 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 13:26:42 EET 2015 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Final Memory: 187M/1400M >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Feb 23, 2015 at 12:33 PM, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I followed the installation guide of >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Fiware for installation. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I used a Ubuntu 14.04 Server 64 bits >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with 4 cores, 8GB RAM and 100GB of HD. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The version of JDK (openjdk-7-jdk) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> is 7u51-2.4.6-1ubuntu4, and postgis 2.1.0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The source that I downloaded is the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> one you shared from git (git clone -b fiware >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver.git >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I followed all the commands so >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that's the reason from asking. I would appreciate if you can tell me what >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> can be different. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-20 13:03 GMT+00:00 Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> without knowledge about your build >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> system (used java version, used operating system etc.) and where you >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> downloaded sources I'm not able to help you with this problem. I just >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> tested version which we have delivered to FIWARE ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver/tree/fiware) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and at least it build without any errors in any test cases. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Also, CatalogBuilder is bit out of >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> my knowledge scope. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Fri, Feb 20, 2015 at 1:18 PM, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Sorry, I forget to attach the log. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-20 11:17 GMT+00:00 Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have one comment about the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> installation. Previously when I installed the geoserver I didn't notice >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> because I was building without tests. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> But I was building geoserver with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> test where I found a failure on: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> testSingleBandedCoverage(org.geoserver.catalog.impl.CatalogBuilderTest) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I attached the log of the output >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> for your information. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> How can I solve this problem? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Kind >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-05 7:48 GMT+00:00 Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for the reply. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have a xyz format data also so >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I will try to test what you sent me and look for the Unit Testing Plan link >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you sent. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If I have any doubt or problem I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> will come back to you. Thank you. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kind regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-05 7:27 GMT+01:00 Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Data publishing is well >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> documented in GeoServer user manual: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/2.5.x/en/user/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Data which we used in our >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> development was from National >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Land Survey of Finland. Source >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> data was in *-xyz*-format, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> which contains elevation data with spatial information. With this source >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> information it is possible to generate shapefile consisting polygon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> structure with elevation data. 2D presentation of the converted shapefile >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with elevation points is flat grid, in 3D presentation each grid points are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> in same elevation level as in the real world. Therefore this grid with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> elevation data can be used as source for terrain presentation. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You can also read user guide >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You can find guide for setting >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> up test setup from here: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ---------- Forwarded message >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ---------- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> From: Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Date: Wed, Feb 4, 2015 at 12:35 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> AM >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Subject: W3DS - FIWARE >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> To: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> miika.santala at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Dear Miika, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I am Ibon from Spain. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I write to you because I am >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> involved in the FIWARE European project. This project promote a GIS data >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> provider with the W3DS for 3D visualization as the one you show on the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> following link: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://130.206.81.238:8080/gis_test_client/index.xhtml >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I contact you because a have >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> been in contact with Jorge Gustavo, who made a similar use of W3DS >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.sigte.udg.edu/jornadassiglibre2012/uploads/presentaciones_12/p43.pdf) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and he told me that W3DS is now supported by you. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have followed the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> instructions of FIWARE wiki ( >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Installation_and_Administration_Guide) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to start using the service and everything seems to work perfectly with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Jetty. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> However, I would like to know >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> how I have to store GIS data >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with 3D information straight to GeoServer. Is there any documentation of >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> how to upload this kind of information? Can you share with me any >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> documentation about it? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Yours >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sincerely, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> material are confidential and may contain legally privileged information. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you are not the intended recipient, please contact the sender and delete >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the e-mail from your system without producing, distributing or retaining >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> copies thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> material are confidential and may contain legally privileged information. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you are not the intended recipient, please contact the sender and delete >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the e-mail from your system without producing, distributing or retaining >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> copies thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> are confidential and may contain legally privileged information. If you are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> are confidential and may contain legally privileged information. If you are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are >>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not >>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail >>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies >>>>>>>>>>>>>>>>>>>>>>> thereof. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are confidential >>>>>>>>>>>>>>>>>>>>> and may contain legally privileged information. If you are not the intended >>>>>>>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> This e-mail and all attached material are confidential >>>>>>>>>>>>>>>>>>> and may contain legally privileged information. If you are not the intended >>>>>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> Juha Hyv?rinen >>>>>>>>>>>>>>>>>> Software Engineer >>>>>>>>>>>>>>>>>> Cyberlightning Ltd. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> See our new press release: >>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> www.cyberlightning.com >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> This e-mail and all attached material are confidential >>>>>>>>>>>>>>>>>> and may contain legally privileged information. If you are not the intended >>>>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system >>>>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> ... >>> >>> [Mensaje recortado] >> >> >> > -- Juha Hyv?rinen Software Engineer Cyberlightning Ltd. email. juha.hyvarinen at cyberlightning.com See our new press release: http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ www.cyberlightning.com This e-mail and all attached material are confidential and may contain legally privileged information. If you are not the intended recipient, please contact the sender and delete the e-mail from your system without producing, distributing or retaining copies thereof. -------------- next part -------------- An HTML attachment was scrubbed... URL: From ibon.salbi at gmail.com Mon Jul 27 10:24:38 2015 From: ibon.salbi at gmail.com (Ibon Salbi) Date: Mon, 27 Jul 2015 10:24:38 +0200 Subject: [Fiware-finodex-coaching] W3DS - FIWARE In-Reply-To: References: Message-ID: Hi Juha, Thank you. If you have any problem or doubts about my explanations, do not hesitate to ask me whatever you need to be clarified. Kind regards, Ibon El 27/07/2015, a las 07:58, Juha Hyv?rinen escribi?: > Hi Ibon, > > I just returned from my summer vacation and I will look into that problem as soon as it's possible. > > - Juha > > On Mon, Jul 13, 2015 at 2:16 PM, Ibon Salbidegoitia wrote: >> Hi Juha, >> >> I have seen from an automatic reply email that Sami is going to be on holidays till 31st of July. Is there any other technical support who can give me feedback about the Fiware Enabler developed by Cyberlightning? >> Best regards, >> >> Ibon >> >> >> 2015-07-13 11:10 GMT+00:00 Ibon Salbidegoitia : >>> Hi Sami, >>> >>> I haven't received reply for the issue I told you in my previous email. >>> Can you please confirm me that you received? If so, can you tell me the situation? >>> Should I put Juha in Cc for all this process? >>> Thank you in advance. Best regards, >>> >>> Ibon >>> >>> >>> 2015-07-01 17:20 GMT+00:00 Ibon Salbidegoitia : >>>> Hi Sami, >>>> >>>> First of all, as I mentioned in a previous email, I have put in Cc our Fiware Accelerator (Finodex) coaches as they requested in a meeting with them to follow the situation of each project that they are supporting. >>>> >>>> About your previous email, the last release is working! I have test it in our test server (http://151.80.143.120/GIS_4.3.3/) and the DEM works with the data provided as test. >>>> I have checked that the test requires the textures to have "texture" on their names and "DEM" for terrain DEM. I have upload my data to test it but I have the following problems: >>>> When I preview your DEM (DEM_geotiff_terrain_EPSG3067) I can see on geoserver a grayscale image on openlayers (openlayers example). >>>> >>>> I have seen that the tiff is a float32 image in grayscale with a 281.604 minimum value and 792.834 maximum value . >>>> >>>> I have upload a similar DEM called "DEM_ODE_terrain" that it can be selected from the DEM GIS Client example (on previous link). This image is also float32 tiff with a minimum value of -3.40282e+38 and maximum of 1545.84, where minimum value is a NoData value as it is shown with gdalinfo command: NoData Value=-3.4028234663852886e+38 >>>> The TIF image I use it can be found here: ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip >>>> The geodesic system of this TIF is ETRS89 that correponds to SRS EPSG:25830. However the preview seems to be a 0-1 grayscale image as you can see here (takes some seconds as it is big). This could be due to the NoData values that make range so big not taking into account that the data does not exist. This is correct? >>>> >>>> The Terrain texture also has been uploaded to Geoserver as can be seen here. >>>> The DEM testing client gives the oportunity to select both layers mentioned (for terrain DEM + terrain texture), however nothing appears, only one small gray square looking upwards (on zenith) with the camera on the client as the altitudes are higher than the ones from the examples. >>>> So everything from test seems to work correctly, but when I introduce my data, the DEM test client does not seem to work. >>>> Could it be due to NoData values? Anyway, why the ortophoto inserted is shown as gray layer? >>>> >>>> Best regards, >>>> Ibon >>>> >>>> >>>> 2015-06-30 11:33 GMT+00:00 Sami J : >>>>> Hi Ibon, >>>>> sorry about late response. We have now made new release from both server and example client, these can be found from the forge under MIWI-GISDataProvider 4.3.3-release: https://forge.fiware.org/frs/?group_id=7 >>>>> source code has been uploaded also to the github. >>>>> >>>>> Short documentation related using DEM images can be found from: http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide#World_Wind_Format_Module >>>>> >>>>> Installation document covers how to upload DEM image to geoserver: http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Installation_and_Administration_Guide#GeoTIFF_based_.28DEM.29_data_sets_for_elevation >>>>> >>>>> >>>>> Regarding using latitude/longitude coordinates, I don't know if you are using them or not. I just wanted to mention this if you haven't noticed this information from the GIS GE documentation :) To elaborate further, provided GIS GE example web client has been implemented so that it works correctly only with metric coordinate system. Using lat/long data source won't work with the provided client, and that's why lat/long coordinate handling needs to be implemented by yourself. But as said, I don't know if you are using data source based in latitude/longitudes or metric coordinates. >>>>> >>>>> >>>>> Best regards, >>>>> Sami >>>>> >>>>> On Thu, Jun 25, 2015 at 11:53 AM, Ibon Salbidegoitia wrote: >>>>>> Hi Sami, >>>>>> >>>>>> I have a couple of things to ask. >>>>>> It is great that the grayscale images for elevation is pretty much ready. Can you tell me when do you expect to finish the test and when I can be able to test it? >>>>>> About the last paragraph, I do not understand why you tell me that lat/long is not supported. Where I have used it? Do you refer to the bounding box of the layers I have upload? So do I have to change the SRS to EPSG:25830 for example instead of EPSG:4326? >>>>>> Best regards, >>>>>> Ibon >>>>>> >>>>>> >>>>>> 2015-06-24 14:22 GMT+00:00 Sami J : >>>>>>> Hi Ibon, >>>>>>> ok now it's clear; in a short problem is that elevation data in grayscale image is not yet supported by the GIS GE. >>>>>>> >>>>>>> The good thing is that implementation for it is pretty much ready, we are doing final testing for it and then documentation will be updated. So soon it is possible to use grayscale elevation images as for source to elevation data, GIS GE implementation supports same data format as SRTM data uses. GIS GE will send response data in octet-stream format, client itself needs to create 3D objects based on the octet-stream data. >>>>>>> >>>>>>> please note that current version of the GIS GE reference web client only supports metric coordinates, Lat/log is not working. I mention this because if you'd like to use GIS data in Lat/Log format, the client scenemanager logic needs to be re-implemented. >>>>>>> >>>>>>> Best regards, >>>>>>> Sami >>>>>>> >>>>>>> >>>>>>> On Wed, Jun 24, 2015 at 10:10 AM, Ibon Salbidegoitia wrote: >>>>>>>> Hi Sami, >>>>>>>> >>>>>>>> I have upload the ortophoto on "fiware" workspace and also texture with appropriate names to be able to see them in my Client examples: >>>>>>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml >>>>>>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml >>>>>>>> >>>>>>>> As you will see, selecting the terrain texture, the new layer appears (surprisingly, the one of other workspace also). But if I try to select the terrain layer (first box of GIS client), you will see that the one uploaded with the name "ODE_test_terrain" does not appear. Maybe I didn't explain correctly in my previous email, but this layer is the altitude layer, the shape. So I suppose that the W3DS options have to be defined, but if you access to that layer on our testing server (http://151.80.143.120:8080/geoserver . User: admin Pass: geoserver) you will see that I cannot access to the W3DS tab of "ODE_test_terrain" layer to make it "Active" and "Queryable" and maybe other options required on the GIS client to be able to require it as the shape of the terrain. >>>>>>>> >>>>>>>> Which could be the problem? >>>>>>>> >>>>>>>> Just one more thing. I am selected on one of the FIWARE accelerators (Finodex) to develop services with Fiware tools. As you imagine, this enabler is one that I am using. They required me to put them (fiware coaches of Finodex accelerator) in CC on this discussion emails to follow the evolution of our project. So I will put them in CC on the next email. I suppose there is no problem on this, is it? >>>>>>>> >>>>>>>> Best regards, >>>>>>>> Ibon >>>>>>>> >>>>>>>> >>>>>>>> 2015-06-23 8:38 GMT+02:00 Sami J : >>>>>>>>> Hi Ibon, >>>>>>>>> thank you for the feedback, I need to update user guide about this issue. Textures are queried via geoserver's WMS-interface. This interface isn't related to W3DS-module and therefore there's no need to declare W3DS related options for the texture layer. So when you define texture layer which you want to use as a texture for 3D terrain, it is enough to define options under "Data"-tab. >>>>>>>>> >>>>>>>>> Best regards, >>>>>>>>> Sami >>>>>>>>> >>>>>>>>> On Mon, Jun 22, 2015 at 6:21 PM, Ibon Salbidegoitia wrote: >>>>>>>>>> Hi Sami, >>>>>>>>>> >>>>>>>>>> Thank you. Yes I knew that because I saw it in the JS code you mention. >>>>>>>>>> I was going to change the ortophoto and texture to workspace to "fiware" for that reason, but being honest I didn't test it because I found the error I described in my previous email. I mean, I was trying to access the texture layer W3DS tab to make it "Active" and "Queryable" as required on the wiki, so that's the reason I sent you the error, because I though that it wouldn't be possible to go ahead without changing the texture the configuration. >>>>>>>>>> >>>>>>>>>> So, if I am wrong and it is not necessary to configure the W3DS tab, I will try it. I don't need from you to change the JS code to find texture and photos of all the workspace. I will change the data to "fiware" workspae. >>>>>>>>>> >>>>>>>>>> I will tell you if everything goes well. >>>>>>>>>> Best regards, >>>>>>>>>> >>>>>>>>>> Ibon >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> 2015-06-22 9:05 GMT+02:00 Sami J : >>>>>>>>>>> Hi Ibon, >>>>>>>>>>> nice to hear you have been able to progress in your work! >>>>>>>>>>> >>>>>>>>>>> Let me answer behalf Juha: Your texture data seems to be ok. In case you are using GIS GE reference client problem with the texture loading might be with the used workspace. GIS GE reference client assumes that all data is in "fiware"-workspace. This applies also for the textures. So changing texture workspace to "fiware" might solve loading problem. >>>>>>>>>>> >>>>>>>>>>> If you'd like to modify reference client to support also other workspaces, URI for texture loading is defined in the scenemngr.js getElements-function. You can modify URL created in there. >>>>>>>>>>> >>>>>>>>>>> Best regards, >>>>>>>>>>> Sami >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Mon, Jun 22, 2015 at 9:05 AM, Juha Hyv?rinen wrote: >>>>>>>>>>>> >>>>>>>>>>>> ---------- Forwarded message ---------- >>>>>>>>>>>> From: Ibon Salbidegoitia >>>>>>>>>>>> Date: Thu, Jun 18, 2015 at 11:05 AM >>>>>>>>>>>> Subject: Re: W3DS - FIWARE >>>>>>>>>>>> To: Juha Hyv?rinen >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Hi Juha, >>>>>>>>>>>> >>>>>>>>>>>> I checked that many changes where done on the data and wiki. Congratulations! Now everything is very clear! >>>>>>>>>>>> >>>>>>>>>>>> I write you because I have some doubts about the texture data. On the wiki "User and Programmers Guide" section "3.3.3 Adding texture" the last sentence says that one option is to store texture on a GeoTIFF. >>>>>>>>>>>> I used the following GeoTIFF texture (MDT) data on float32 format to try it. You can download it here: ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip >>>>>>>>>>>> >>>>>>>>>>>> The file has been uploaded to Geoserver. As it does not recognize the SRS, I defined whichis the EPSG:25830. >>>>>>>>>>>> As it says in the Unit Testing Plan, I have to go to W3DS tab to activate and make it queryable. >>>>>>>>>>>> However, it returns an error on JIRA. >>>>>>>>>>>> >>>>>>>>>>>> You can check it in our geoserver: >>>>>>>>>>>> http://151.80.143.120:8080/geoserver/ >>>>>>>>>>>> + User: admin >>>>>>>>>>>> + Pass: geoserver >>>>>>>>>>>> >>>>>>>>>>>> The GeoTIFF texture is defined on the layer "terrain" , on workspace "ODE" >>>>>>>>>>>> Please let me know why this option is not available. >>>>>>>>>>>> Best regards, >>>>>>>>>>>> >>>>>>>>>>>> Ibon >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> 2015-06-02 18:20 GMT+02:00 Ibon Salbidegoitia : >>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>> >>>>>>>>>>>>> I have been able to run GIS Client examples: >>>>>>>>>>>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml >>>>>>>>>>>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml >>>>>>>>>>>>> >>>>>>>>>>>>> As you can see in the attached pictures, there seems to be some problems with space between layers and I cannot see the xml3d buildings on the examples. >>>>>>>>>>>>> Do you know where the buildings should appear? >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Just as comment, I have found more bugs that may improve the Unit Testing Plan. I list all of them below if you are interested on changing them >>>>>>>>>>>>> >>>>>>>>>>>>> On wiki: >>>>>>>>>>>>> 1.2.2.4 PostGIS connection to GeoServer >>>>>>>>>>>>> + When Publish fiware_test_terrain PostGIS - PostGIS Database >>>>>>>>>>>>> In "Objects Attributes" section select "name" for the "Object ID" it is not possible because only options are [elevation / geom / lod]. The documentation seems to need to select "name" when it does not exist. >>>>>>>>>>>>> >>>>>>>>>>>>> 1.2.3.2 terrain_texture_orto.tif and terrain_texture_raster.tif >>>>>>>>>>>>> + Raster_map_image_for_terrain_texture/terrain_texture_raster.tif >>>>>>>>>>>>> SRS is automatically set to EPSG:404000. Not EPSG:3067 as it is said on the wiki >>>>>>>>>>>>> + Aero_photo_for_terrain_texture/terrain_texture_orto.tif >>>>>>>>>>>>> SRS is automatically set to EPSG:3067. Not EPSG:404000 as it is said on the wiki >>>>>>>>>>>>> >>>>>>>>>>>>> On GIS Client: >>>>>>>>>>>>> Version 4.3.2 >>>>>>>>>>>>> + The both examples () have changed the script "map.js" and now it is not automatically defined "baseUrl" variable as previous version 4.2.2. It will be recommended to use the code lines: >>>>>>>>>>>>> var ip = location.host; >>>>>>>>>>>>> var baseUrl = "http://"+ip+"/geoserver/"; >>>>>>>>>>>>> >>>>>>>>>>>>> On MIWI-GISDataProvider download section: >>>>>>>>>>>>> + Version 4.3.2 >>>>>>>>>>>>> - Test assest 4.3.2 ZIP file has a space between text and version numbers -> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>>>> - ZIP file when decompressed has a folder with a space between text ("rel") and numbers ("4.3.2") -> rel\ 4.3.2 >>>>>>>>>>>>> - Subfolders of Test_assest "Building_coordinates /" and "PostGIS_database_backup /" have a space at the end of the name. >>>>>>>>>>>>> + Version 4.2.2 >>>>>>>>>>>>> - Subfolders of Test_assest "Building_coordinates /" and "PostGIS_database_backup /" have a space at the end of the name. >>>>>>>>>>>>> >>>>>>>>>>>>> Best regards, >>>>>>>>>>>>> >>>>>>>>>>>>> Ibon >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> 2015-06-02 11:59 GMT+00:00 Juha Hyv?rinen : >>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thank you for feedback about test asset naming problems, I wasn't aware of those and I have informed my colleague who have made those packages. He will fix those tomorrow. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Building coordinates are needed if you want to use external 3D models in your application with real spatial information. For example hand made building models placed in correct position etc. If you don't need those then that step is optional. >>>>>>>>>>>>>> >>>>>>>>>>>>>> We also updated guide for database restoring and it can be found from here: https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan#Import_PostGIS_database_backup_with_terrain_data >>>>>>>>>>>>>> >>>>>>>>>>>>>> Your problem was that username in the database backup was defined to be 'sami' and it does not exist in your system. It is fixed by ignoring username from the database backup. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Before restoring that database backup you should drop fiware_test_terrain table. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Let me know if this was helpful. >>>>>>>>>>>>>> >>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Tue, Jun 2, 2015 at 11:41 AM, Ibon Salbidegoitia wrote: >>>>>>>>>>>>>>> Sorry I send previous email without finishing the email as error. You have below all the email. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Sorry for the delay, I was busy and these last 3 days I had some problems with tomcat so I decided to format everything and start from the beginning to know what errors are happening. >>>>>>>>>>>>>>> I will try to explain cronologically all the steps and error/bugs found. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> First of all I update git repository and change to the "fiware_rel_4.x" branch to create the WAR file with the maven command: mvn install -DdownloadSources=true -DskipTests=true -Pw3ds >>>>>>>>>>>>>>> After restarting tomcat, the geoserver seems to work -> http://151.80.143.120:8080/geoserver (User: admin / Pass: geoserver) >>>>>>>>>>>>>>> I did not use the WAR published, I created my own from the new github branch as you see. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> So then I decided to update the test unit plan. Here I have one comment just to improve in case you want. I have checked that you usually use "space" on folders and files which usually is no suitable. I refer specificly to the 4.3.2 version. >>>>>>>>>>>>>>> + The ZIP file has a "space" on the name what requires to use ASCI character to download: wget --no-check-certificate https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>>>>>> + When ZIP is decompressed, the name of the folder has also a "space": /home/UnitTestPlan/rel\ 4.3.2 >>>>>>>>>>>>>>> + PostGIS database backup has also a "space" at the end: /home/UnitTestPlan/rel\ 4.3.2/PostGIS_database_backup\ / >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Any way, I continue with the database restore. On the PostGIS database backup, I checked on the 4.3.2 version that there are 2 files: building_coordinates and test_asset-terrain. >>>>>>>>>>>>>>> The "building_coordinates" file appears to be a text format dump. So is this file necessary to upload to database? >>>>>>>>>>>>>>> The "test_asset-terrain" could be uploaded to postgres with the following command: pg_restore -d fiware_test /home/UnitTestPlan/rel\ 4.3.2/PostGIS_database_backup\ /FIWARE-postgis-test_asset-terrain >>>>>>>>>>>>>>> However, I receive the following errors: >>>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>>> pg_restore: [archiver (db)] Error while PROCESSING TOC: >>>>>>>>>>>>>>> pg_restore: [archiver (db)] Error from TOC entry 184; 1259 65659 TABLE fiware_test_terrain sami >>>>>>>>>>>>>>> pg_restore: [archiver (db)] could not execute query: ERROR: role "sami" does not exist >>>>>>>>>>>>>>> Command was: ALTER TABLE public.fiware_test_terrain OWNER TO sami; >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> pg_restore: [archiver (db)] Error from TOC entry 183; 1259 65657 SEQUENCE fiware_test_terrain_id_seq sami >>>>>>>>>>>>>>> pg_restore: [archiver (db)] could not execute query: ERROR: role "sami" does not exist >>>>>>>>>>>>>>> Command was: ALTER TABLE public.fiware_test_terrain_id_seq OWNER TO sami; >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> WARNING: errors ignored on restore: 2 >>>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I checked the information stored from backup on the database and found the following tables, which I am not sure if they are all or there are some missing. >>>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>>> List of relations >>>>>>>>>>>>>>> Schema | Name | Type | Owner >>>>>>>>>>>>>>> --------+----------------------------+----------+---------- >>>>>>>>>>>>>>> public | fiware_test_terrain | table | postgres >>>>>>>>>>>>>>> public | fiware_test_terrain_id_seq | sequence | postgres >>>>>>>>>>>>>>> public | geography_columns | view | postgres >>>>>>>>>>>>>>> public | geometry_columns | view | postgres >>>>>>>>>>>>>>> public | raster_columns | view | postgres >>>>>>>>>>>>>>> public | raster_overviews | view | postgres >>>>>>>>>>>>>>> public | spatial_ref_sys | table | postgres >>>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I did not continue because it seems that there are some errors that I should first understand and fix before continuing. >>>>>>>>>>>>>>> If you need something else from my side, please let me know. And please, let me know if I have done something wrong. >>>>>>>>>>>>>>> Thank you. Best regards, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> 2015-06-02 8:33 GMT+00:00 Ibon Salbidegoitia : >>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Sorry for the delay, I was busy and these last 3 days I had some problems with tomcat so I decided to format everything and start from the beginning to know what errors are happening. >>>>>>>>>>>>>>>> I will try to explain cronologically all the steps and error/bugs found. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> First of all I update git repository and change to the "fiware_rel_4.x" branch to create the WAR file with the maven command: mvn install -DdownloadSources=true -DskipTests=true -Pw3ds >>>>>>>>>>>>>>>> After restarting tomcat, the geoserver seems to work -> http://151.80.143.120:8080/geoserver (User: admin / Pass: geoserver) >>>>>>>>>>>>>>>> I did not use the WAR published, I created my own from the new github branch as you see. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> So then I decided to update the test unit plan. Here I have one comment just to improve in case you want. I have checked that you usually use "space" on folders and files which usually is no suitable. I refer specificly to the 4.3.2 version. >>>>>>>>>>>>>>>> + The ZIP file has a "space" on the name what requires to use ASCI character to download: wget --no-check-certificate https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>>>>>>> + When ZIP is decompressed, the name of the folder has also a "space": /home/UnitTestPlan/rel\ 4.3.2 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> 2015-05-26 12:49 GMT+00:00 Juha Hyv?rinen : >>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> That problem should now be fixed, code is in the github (https://github.com/Cyberlightning/geoserver/tree/fiware_rel_4.x) and we have also published new war file in Fiware FusionForge (https://forge.fiware.org/frs/download.php/1643/geoserver.war). >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> We also updated test assets and reference client. Updated reference client is already available from the Github and test assets will be published later today or tomorrow morning to FusionForge under release 4.3.2 (https://forge.fiware.org/frs/?group_id=7). >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I hope that this release will fix problems you encountered earlier. Please report back did this solve those problems. Thank you for submitting these bug reports. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Tue, May 26, 2015 at 9:33 AM, Juha Hyv?rinen wrote: >>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> We have looked into that problem now for couple of days and it seems to be somehow related to Tomcat and system locale settings. We can reproduce same problem when we deploy to a Tomcat instance while with Jetty everything works just fine. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I'm working with the fix now, but there is also a workaround: deploy war package to a Jetty instance. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I will notify you once I have pushed code changes to git. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Fri, May 22, 2015 at 1:08 PM, Juha Hyv?rinen wrote: >>>>>>>>>>>>>>>>>>> I also forgot to mention that you should move to newer test client which we will release officially during summer, but code is already available from the Github: https://github.com/Cyberlightning/Cyber-WeX >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Client code can be found from here: https://github.com/Cyberlightning/Cyber-WeX/tree/master/GIS/GIS_Client_xml3d >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Fri, May 22, 2015 at 12:30 PM, Juha Hyv?rinen wrote: >>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> I have to admit that I'm clueless with that terrain problem, since I couldn't replicate it. Everything seems to be right at the server side but still data is somehow corrupted when it arrives to the client. We have deployed that same data set without any problems to more than 20 different systems by many different users during our internal development and testing. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> There are still few points which you could try. >>>>>>>>>>>>>>>>>>>> 1. Install newer PostGIS version for example from Ubuntu repositories instead of manually build one. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> 2. Try our upcoming release of Geoserver from Github. This shouldn't be difficult, since you already build your own version. >>>>>>>>>>>>>>>>>>>> If you used git to clone code earlier, you only need to pull new changes from the repository and change code branch from fiware to fiware_rel_4.x (git pull && git checkout fiware_rel_4.x) and rebuild project. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Also I created database dump from building coordinates table and it's as an attachment. We will add it also to the assets and update documentation once we have little spare time to do it. Table can be restored with command: sudo -u postgres psql databasename < path/to/the/file.sql >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Before restoring that dumb, change URLs in it to point a place where you actually have that xml file. At the moment URL is http://localhost/Test_asset/Building_model/building.xml >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Thu, May 21, 2015 at 1:09 PM, Ibon Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> You are right, I forgot to edit the tomcat7 default start-up configuration file. >>>>>>>>>>>>>>>>>>>>> Now is using openJDK. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> 2015-05-21 9:36 GMT+00:00 Juha Hyv?rinen : >>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Could you restart tomcat again since it still uses Oracle java 1.8. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Thu, May 21, 2015 at 10:57 AM, Ibon Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I checked that tomcat was down due to low xmx size. I restarted and modify xmx to avoid errors. >>>>>>>>>>>>>>>>>>>>>>> Asnwering to your comments: >>>>>>>>>>>>>>>>>>>>>>> + Please let me know when you update the documentation to check importin building coordinates >>>>>>>>>>>>>>>>>>>>>>> + I imported with following command of postgres: >>>>>>>>>>>>>>>>>>>>>>> $ su - postgres >>>>>>>>>>>>>>>>>>>>>>> $ createdb fiware_test >>>>>>>>>>>>>>>>>>>>>>> $ pg_restore -d fiware_test ./Test_asset_3.3/PostGIS_database_backup\ /FIWARE-postgis-test_asset >>>>>>>>>>>>>>>>>>>>>>> Because I am using remote server I cannot use pgadmin, but the import was correct without errors and I checked that the data was correct. >>>>>>>>>>>>>>>>>>>>>>> + I am using Oracle java (1.8.0_31), so I will change it to openJDK7 as you recommend. Now is changed to openJDK7 to version 1.7.0_79 >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> As I said, the Geoserver is active, so you can check on it whatever you want. >>>>>>>>>>>>>>>>>>>>>>> Kind regards, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> 2015-05-21 6:56 GMT+00:00 Juha Hyv?rinen : >>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I was looking into those errors you reported but your server went down before I could figure out any final solution. Here are m -------------- next part -------------- An HTML attachment was scrubbed... URL: From juha.hyvarinen at cyberlightning.com Mon Jul 27 14:58:20 2015 From: juha.hyvarinen at cyberlightning.com (=?UTF-8?Q?Juha_Hyv=C3=A4rinen?=) Date: Mon, 27 Jul 2015 15:58:20 +0300 Subject: [Fiware-finodex-coaching] W3DS - FIWARE In-Reply-To: References: Message-ID: Hi Ibon, Here's what I found out about your reported problems. 1. I lookd into your test data and elevation data seemed to be correct. Since all customer level monitors can only show 8 bit colors, previewing image with higher color depth will be normalized to 8 bit images and all color values are recomputed to that scale. When you zoom into "white" only are, you will see more details also in preview window. You can also view raw pixel values just by clicking a spot you want more info from. 2. I noticed that srs value is hard coded into demo client code and therefor it's incorrect for your dataset. It is defined in scenemngr.js file in line 257: var srs = "&srs=EPSG:3067"; For your data it should be: var srs = "&srs=EPSG:25830" I haven't worked with current demo client code, so I'm not sure how that part of code could be made more dynamic and I'm also not sure if Sami will have time for that after he returns from his vacation. For now quick fix is to change that value to code. It's also worth to note that demo client is delivered only for demonstration purposes and therefore it's not guaranteed to work with all possible datasets. 3. Problem with textures not showing could be related to the fact that terrain and texture are defined in different coordinate systems and client is not able to handle that situation. As noted earlier I'm not familiar with client code and debugging that will take some time. From the server side everything seems to be just fine. - Juha On Mon, Jul 27, 2015 at 11:24 AM, Ibon Salbi wrote: > Hi Juha, > > Thank you. If you have any problem or doubts about my explanations, do not > hesitate to ask me whatever you need to be clarified. > Kind regards, > > Ibon > > > El 27/07/2015, a las 07:58, Juha Hyv?rinen < > juha.hyvarinen at cyberlightning.com> escribi?: > > Hi Ibon, > > I just returned from my summer vacation and I will look into that problem > as soon as it's possible. > > - Juha > > On Mon, Jul 13, 2015 at 2:16 PM, Ibon Salbidegoitia > wrote: > >> Hi Juha, >> >> I have seen from an automatic reply email that Sami is going to be on >> holidays till 31st of July. Is there any other technical support who can >> give me feedback about the Fiware Enabler developed by Cyberlightning? >> Best regards, >> >> Ibon >> >> >> 2015-07-13 11:10 GMT+00:00 Ibon Salbidegoitia : >> >>> Hi Sami, >>> >>> I haven't received reply for the issue I told you in my previous email. >>> Can you please confirm me that you received? If so, can you tell me the >>> situation? >>> Should I put Juha in Cc for all this process? >>> Thank you in advance. Best regards, >>> >>> Ibon >>> >>> >>> 2015-07-01 17:20 GMT+00:00 Ibon Salbidegoitia : >>> >>>> Hi Sami, >>>> >>>> First of all, as I mentioned in a previous email, I have put in Cc our >>>> Fiware Accelerator (Finodex) coaches as they requested in a meeting with >>>> them to follow the situation of each project that they are supporting. >>>> >>>> About your previous email, the last release is working! I have test it >>>> in our test server (http://151.80.143.120/GIS_4.3.3/) and the DEM >>>> works with the data provided as test. >>>> I have checked that the test requires the textures to have "texture" on >>>> their names and "DEM" for terrain DEM. I have upload my data to test it but >>>> I have the following problems: >>>> >>>> 1. When I preview your DEM (DEM_geotiff_terrain_EPSG3067) I can see >>>> on geoserver a grayscale image on openlayers (openlayers example >>>> >>>> ). >>>> >>>> I have seen that the tiff is a float32 image in grayscale with >>>> a 281.604 minimum value and 792.834 maximum value . >>>> >>>> I have upload a similar DEM called "DEM_ODE_terrain" that it can be >>>> selected from the DEM GIS Client example (on previous link). This image is >>>> also float32 tiff with a minimum value of -3.40282e+38 and maximum >>>> of 1545.84, where minimum value is a NoData value as it is shown with >>>> gdalinfo command: NoData Value=-3.4028234663852886e+38 >>>> The TIF image I use it can be found here: >>>> ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip >>>> The geodesic system of this TIF is ETRS89 that correponds to SRS >>>> EPSG:25830. However the preview seems to be a 0-1 grayscale image as you >>>> can see here >>>> (takes >>>> some seconds as it is big). This could be due to the NoData values >>>> that make range so big not taking into account that the data does not >>>> exist. This is correct? >>>> >>>> 2. The Terrain texture also has been uploaded to Geoserver as can >>>> be seen here >>>> >>>> . >>>> The DEM testing client gives the oportunity to select both layers >>>> mentioned (for terrain DEM + terrain texture), however nothing appears, >>>> only one small gray square looking upwards (on zenith) with the camera on >>>> the client as the altitudes are higher than the ones from the examples. >>>> >>>> So everything from test seems to work correctly, but when I introduce >>>> my data, the DEM test client does not seem to work. >>>> Could it be due to NoData values? Anyway, why the ortophoto inserted is >>>> shown as gray layer? >>>> >>>> Best regards, >>>> Ibon >>>> >>>> >>>> 2015-06-30 11:33 GMT+00:00 Sami J : >>>> >>>>> Hi Ibon, >>>>> sorry about late response. We have now made new release from both >>>>> server and example client, these can be found from the forge under *MIWI-GISDataProvider >>>>> 4.3.3*-release: https://forge.fiware.org/frs/?group_id=7 >>>>> source code has been uploaded also to the github. >>>>> >>>>> Short documentation related using DEM images can be found from: >>>>> http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide#World_Wind_Format_Module >>>>> >>>>> Installation document covers how to upload DEM image to geoserver: >>>>> http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Installation_and_Administration_Guide#GeoTIFF_based_.28DEM.29_data_sets_for_elevation >>>>> >>>>> >>>>> Regarding using latitude/longitude coordinates, I don't know if you >>>>> are using them or not. I just wanted to mention this if you haven't noticed >>>>> this information from the GIS GE documentation :) To elaborate further, >>>>> provided GIS GE example web client has been implemented so that it works >>>>> correctly only with metric coordinate system. Using lat/long data source >>>>> won't work with the provided client, and that's why lat/long coordinate >>>>> handling needs to be implemented by yourself. But as said, I don't know if >>>>> you are using data source based in latitude/longitudes or metric >>>>> coordinates. >>>>> >>>>> >>>>> Best regards, >>>>> Sami >>>>> >>>>> On Thu, Jun 25, 2015 at 11:53 AM, Ibon Salbidegoitia < >>>>> ibon.salbi at gmail.com> wrote: >>>>> >>>>>> Hi Sami, >>>>>> >>>>>> I have a couple of things to ask. >>>>>> >>>>>> 1. It is great that the grayscale images for elevation is pretty >>>>>> much ready. Can you tell me when do you expect to finish the test and when >>>>>> I can be able to test it? >>>>>> 2. About the last paragraph, I do not understand why you tell me >>>>>> that lat/long is not supported. Where I have used it? Do you refer to the >>>>>> bounding box of the layers I have upload? So do I have to change the SRS to >>>>>> EPSG:25830 for example instead of EPSG:4326? >>>>>> >>>>>> Best regards, >>>>>> Ibon >>>>>> >>>>>> >>>>>> 2015-06-24 14:22 GMT+00:00 Sami J : >>>>>> >>>>>>> Hi Ibon, >>>>>>> ok now it's clear; in a short problem is that elevation data in >>>>>>> grayscale image is not yet supported by the GIS GE. >>>>>>> >>>>>>> The good thing is that implementation for it is pretty much ready, >>>>>>> we are doing final testing for it and then documentation will be updated. >>>>>>> So soon it is possible to use grayscale elevation images as for source to >>>>>>> elevation data, GIS GE implementation supports same data format as SRTM >>>>>>> data uses. GIS GE will send response data in octet-stream format, client >>>>>>> itself needs to create 3D objects based on the octet-stream data. >>>>>>> >>>>>>> please note that current version of the GIS GE reference web client >>>>>>> only supports metric coordinates, Lat/log is not working. I mention this >>>>>>> because if you'd like to use GIS data in Lat/Log format, the client >>>>>>> scenemanager logic needs to be re-implemented. >>>>>>> >>>>>>> Best regards, >>>>>>> Sami >>>>>>> >>>>>>> >>>>>>> On Wed, Jun 24, 2015 at 10:10 AM, Ibon Salbidegoitia < >>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>> >>>>>>>> Hi Sami, >>>>>>>> >>>>>>>> I have upload the ortophoto on "fiware" workspace and also texture >>>>>>>> with appropriate names to be able to see them in my Client examples: >>>>>>>> + >>>>>>>> http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml >>>>>>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml >>>>>>>> >>>>>>>> As you will see, selecting the terrain texture, the new layer >>>>>>>> appears (surprisingly, the one of other workspace also). But if I try to >>>>>>>> select the terrain layer (first box of GIS client), you will see that the >>>>>>>> one uploaded with the name "ODE_test_terrain" does not appear. Maybe I >>>>>>>> didn't explain correctly in my previous email, but this layer is the >>>>>>>> altitude layer, the shape. So I suppose that the W3DS options have to be >>>>>>>> defined, but if you access to that layer on our testing server ( >>>>>>>> http://151.80.143.120:8080/geoserver . User: admin Pass: >>>>>>>> geoserver) you will see that I cannot access to the W3DS tab of "ODE_test_terrain" >>>>>>>> layer to make it "Active" and "Queryable" and maybe other options required >>>>>>>> on the GIS client to be able to require it as the shape of the terrain. >>>>>>>> >>>>>>>> Which could be the problem? >>>>>>>> >>>>>>>> Just one more thing. I am selected on one of the FIWARE >>>>>>>> accelerators (Finodex) to develop services with Fiware tools. As you >>>>>>>> imagine, this enabler is one that I am using. They required me to put them >>>>>>>> (fiware coaches of Finodex accelerator) in CC on this discussion emails to >>>>>>>> follow the evolution of our project. So I will put them in CC on the next >>>>>>>> email. I suppose there is no problem on this, is it? >>>>>>>> >>>>>>>> Best regards, >>>>>>>> Ibon >>>>>>>> >>>>>>>> >>>>>>>> 2015-06-23 8:38 GMT+02:00 Sami J : >>>>>>>> >>>>>>>>> Hi Ibon, >>>>>>>>> thank you for the feedback, I need to update user guide about this >>>>>>>>> issue. Textures are queried via geoserver's WMS-interface. This interface >>>>>>>>> isn't related to W3DS-module and therefore there's no need >>>>>>>>> to declare W3DS related options for the texture layer. So when >>>>>>>>> you define texture layer which you want to use as a texture for 3D terrain, >>>>>>>>> it is enough to define options under "Data"-tab. >>>>>>>>> >>>>>>>>> Best regards, >>>>>>>>> Sami >>>>>>>>> >>>>>>>>> On Mon, Jun 22, 2015 at 6:21 PM, Ibon Salbidegoitia < >>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>> >>>>>>>>>> Hi Sami, >>>>>>>>>> >>>>>>>>>> Thank you. Yes I knew that because I saw it in the JS code you >>>>>>>>>> mention. >>>>>>>>>> I was going to change the ortophoto and texture to workspace to >>>>>>>>>> "fiware" for that reason, but being honest I didn't test it because I found >>>>>>>>>> the error I described in my previous email. I mean, I was trying to access >>>>>>>>>> the texture layer W3DS tab to make it "Active" and "Queryable" as required >>>>>>>>>> on the wiki, so that's the reason I sent you the error, because I though >>>>>>>>>> that it wouldn't be possible to go ahead without changing the texture the >>>>>>>>>> configuration. >>>>>>>>>> >>>>>>>>>> So, if I am wrong and it is not necessary to configure the W3DS >>>>>>>>>> tab, I will try it. I don't need from you to change the JS code to find >>>>>>>>>> texture and photos of all the workspace. I will change the data to "fiware" >>>>>>>>>> workspae. >>>>>>>>>> >>>>>>>>>> I will tell you if everything goes well. >>>>>>>>>> Best regards, >>>>>>>>>> >>>>>>>>>> Ibon >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> 2015-06-22 9:05 GMT+02:00 Sami J >>>>>>>>>> : >>>>>>>>>> >>>>>>>>>>> Hi Ibon, >>>>>>>>>>> nice to hear you have been able to progress in your work! >>>>>>>>>>> >>>>>>>>>>> Let me answer behalf Juha: Your texture data seems to be ok. In >>>>>>>>>>> case you are using GIS GE reference client problem with the texture loading >>>>>>>>>>> might be with the used workspace. GIS GE reference client assumes that all >>>>>>>>>>> data is in "fiware"-workspace. This applies also for the textures. So >>>>>>>>>>> changing texture workspace to "fiware" might solve loading problem. >>>>>>>>>>> >>>>>>>>>>> If you'd like to modify reference client to support also other >>>>>>>>>>> workspaces, URI for texture loading is defined in the scenemngr.js >>>>>>>>>>> getElements-function. You can modify URL created in there. >>>>>>>>>>> >>>>>>>>>>> Best regards, >>>>>>>>>>> Sami >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Mon, Jun 22, 2015 at 9:05 AM, Juha Hyv?rinen < >>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> ---------- Forwarded message ---------- >>>>>>>>>>>> From: Ibon Salbidegoitia >>>>>>>>>>>> Date: Thu, Jun 18, 2015 at 11:05 AM >>>>>>>>>>>> Subject: Re: W3DS - FIWARE >>>>>>>>>>>> To: Juha Hyv?rinen >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Hi Juha, >>>>>>>>>>>> >>>>>>>>>>>> I checked that many changes where done on the data and wiki. >>>>>>>>>>>> Congratulations! Now everything is very clear! >>>>>>>>>>>> >>>>>>>>>>>> I write you because I have some doubts about the texture data. >>>>>>>>>>>> On the wiki "User and Programmers Guide" section "3.3.3 Adding texture" the >>>>>>>>>>>> last sentence says that one option is to store texture on a GeoTIFF. >>>>>>>>>>>> I used the following GeoTIFF texture (MDT) data on float32 >>>>>>>>>>>> format to try it. You can download it here: >>>>>>>>>>>> ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip >>>>>>>>>>>> >>>>>>>>>>>> The file has been uploaded to Geoserver. As it does not >>>>>>>>>>>> recognize the SRS, I defined whichis the EPSG:25830. >>>>>>>>>>>> As it says in the Unit Testing Plan, I have to go to W3DS tab >>>>>>>>>>>> to activate and make it queryable. >>>>>>>>>>>> However, it returns an error on JIRA. >>>>>>>>>>>> >>>>>>>>>>>> You can check it in our geoserver: >>>>>>>>>>>> http://151.80.143.120:8080/geoserver/ >>>>>>>>>>>> + User: admin >>>>>>>>>>>> + Pass: geoserver >>>>>>>>>>>> >>>>>>>>>>>> The GeoTIFF texture is defined on the layer "terrain" , on >>>>>>>>>>>> workspace "ODE" >>>>>>>>>>>> Please let me know why this option is not available. >>>>>>>>>>>> Best regards, >>>>>>>>>>>> >>>>>>>>>>>> Ibon >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> 2015-06-02 18:20 GMT+02:00 Ibon Salbidegoitia < >>>>>>>>>>>> ibon.salbi at gmail.com>: >>>>>>>>>>>> >>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>> >>>>>>>>>>>>> I have been able to run GIS Client examples: >>>>>>>>>>>>> + >>>>>>>>>>>>> http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml >>>>>>>>>>>>> + >>>>>>>>>>>>> http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml >>>>>>>>>>>>> >>>>>>>>>>>>> As you can see in the attached pictures, there seems to be >>>>>>>>>>>>> some problems with space between layers and I cannot see the xml3d >>>>>>>>>>>>> buildings on the examples. >>>>>>>>>>>>> Do you know where the buildings should appear? >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Just as comment, I have found more bugs that may improve the >>>>>>>>>>>>> Unit Testing Plan. I list all of them below if you are interested on >>>>>>>>>>>>> changing them >>>>>>>>>>>>> >>>>>>>>>>>>> *On wiki*: >>>>>>>>>>>>> 1.2.2.4 PostGIS connection to GeoServer >>>>>>>>>>>>> + When Publish fiware_test_terrain PostGIS - PostGIS >>>>>>>>>>>>> Database >>>>>>>>>>>>> In "Objects Attributes" section select "name" for the >>>>>>>>>>>>> "Object ID" it is not possible because only options are [elevation / geom / >>>>>>>>>>>>> lod]. The documentation seems to need to select "name" when it does not >>>>>>>>>>>>> exist. >>>>>>>>>>>>> >>>>>>>>>>>>> 1.2.3.2 terrain_texture_orto.tif and terrain_texture_raster.tif >>>>>>>>>>>>> >>>>>>>>>>>>> + Raster_map_image_for_terrain_texture/terrain_texture_raster.tif >>>>>>>>>>>>> SRS is automatically set to EPSG:404000. Not EPSG:3067 as >>>>>>>>>>>>> it is said on the wiki >>>>>>>>>>>>> + Aero_photo_for_terrain_texture/terrain_texture_orto.tif >>>>>>>>>>>>> SRS is automatically set to EPSG:3067. Not EPSG:404000 as >>>>>>>>>>>>> it is said on the wiki >>>>>>>>>>>>> >>>>>>>>>>>>> *On GIS Client*: >>>>>>>>>>>>> Version 4.3.2 >>>>>>>>>>>>> + The both examples () have changed the script "map.js" and >>>>>>>>>>>>> now it is not automatically defined "baseUrl" variable as previous version >>>>>>>>>>>>> 4.2.2. It will be recommended to use the code lines: >>>>>>>>>>>>> var ip = location.host; >>>>>>>>>>>>> var baseUrl = "http://"+ip+"/geoserver/"; >>>>>>>>>>>>> >>>>>>>>>>>>> *On MIWI-GISDataProvider download section*: >>>>>>>>>>>>> + Version 4.3.2 >>>>>>>>>>>>> - Test assest 4.3.2 ZIP file has a space between text >>>>>>>>>>>>> and version numbers -> >>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>>>> - ZIP file when decompressed has a folder with a space >>>>>>>>>>>>> between text ("rel") and numbers ("4.3.2") -> rel\ 4.3.2 >>>>>>>>>>>>> - Subfolders of Test_assest "Building_coordinates /" and >>>>>>>>>>>>> "PostGIS_database_backup /" have a space at the end of the name. >>>>>>>>>>>>> + Version 4.2.2 >>>>>>>>>>>>> - Subfolders of Test_assest "Building_coordinates /" and >>>>>>>>>>>>> "PostGIS_database_backup /" have a space at the end of the name. >>>>>>>>>>>>> >>>>>>>>>>>>> Best regards, >>>>>>>>>>>>> >>>>>>>>>>>>> Ibon >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> 2015-06-02 11:59 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>> >>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thank you for feedback about test asset naming problems, I >>>>>>>>>>>>>> wasn't aware of those and I have informed my colleague who have made those >>>>>>>>>>>>>> packages. He will fix those tomorrow. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Building coordinates are needed if you want to use external >>>>>>>>>>>>>> 3D models in your application with real spatial information. For example >>>>>>>>>>>>>> hand made building models placed in correct position etc. If you don't need >>>>>>>>>>>>>> those then that step is optional. >>>>>>>>>>>>>> >>>>>>>>>>>>>> We also updated guide for database restoring and it can be >>>>>>>>>>>>>> found from here: >>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan#Import_PostGIS_database_backup_with_terrain_data >>>>>>>>>>>>>> >>>>>>>>>>>>>> Your problem was that username in the database backup was >>>>>>>>>>>>>> defined to be 'sami' and it does not exist in your system. It is fixed by >>>>>>>>>>>>>> ignoring username from the database backup. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Before restoring that database backup you should drop >>>>>>>>>>>>>> fiware_test_terrain table. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Let me know if this was helpful. >>>>>>>>>>>>>> >>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Tue, Jun 2, 2015 at 11:41 AM, Ibon Salbidegoitia < >>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Sorry I send previous email without finishing the email as >>>>>>>>>>>>>>> error. You have below all the email. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Sorry for the delay, I was busy and these last 3 days I had >>>>>>>>>>>>>>> some problems with tomcat so I decided to format everything and start from >>>>>>>>>>>>>>> the beginning to know what errors are happening. >>>>>>>>>>>>>>> I will try to explain cronologically all the steps and >>>>>>>>>>>>>>> error/bugs found. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> First of all I update git repository and change to the >>>>>>>>>>>>>>> "fiware_rel_4.x" branch to create the WAR file with the maven command: mvn >>>>>>>>>>>>>>> install -DdownloadSources=true -DskipTests=true -Pw3ds >>>>>>>>>>>>>>> After restarting tomcat, the geoserver seems to work -> >>>>>>>>>>>>>>> http://151.80.143.120:8080/geoserver (User: admin / >>>>>>>>>>>>>>> Pass: geoserver) >>>>>>>>>>>>>>> I did not use the WAR published, I created my own from the >>>>>>>>>>>>>>> new github branch as you see. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> So then I decided to update the test unit plan. Here I have >>>>>>>>>>>>>>> one comment just to improve in case you want. I have checked that you >>>>>>>>>>>>>>> usually use "space" on folders and files which usually is no suitable. I >>>>>>>>>>>>>>> refer specificly to the 4.3.2 version. >>>>>>>>>>>>>>> + The ZIP file has a "space" on the name what requires to >>>>>>>>>>>>>>> use ASCI character to download: wget --no-check-certificate >>>>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>>>>>> + When ZIP is decompressed, the name of the folder has >>>>>>>>>>>>>>> also a "space": /home/UnitTestPlan/rel\ 4.3.2 >>>>>>>>>>>>>>> + PostGIS database backup has also a "space" at the >>>>>>>>>>>>>>> end: /home/UnitTestPlan/rel\ 4.3.2/PostGIS_database_backup\ / >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Any way, I continue with the database restore. On the >>>>>>>>>>>>>>> PostGIS database backup, I checked on the 4.3.2 version that there are 2 >>>>>>>>>>>>>>> files: building_coordinates and test_asset-terrain. >>>>>>>>>>>>>>> The "building_coordinates" file appears to be a text format >>>>>>>>>>>>>>> dump. So is this file necessary to upload to database? >>>>>>>>>>>>>>> The "test_asset-terrain" could be uploaded to postgres with >>>>>>>>>>>>>>> the following command: pg_restore -d fiware_test /home/UnitTestPlan/rel\ >>>>>>>>>>>>>>> 4.3.2/PostGIS_database_backup\ /FIWARE-postgis-test_asset-terrain >>>>>>>>>>>>>>> However, I receive the following errors: >>>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>>> pg_restore: [archiver (db)] Error while PROCESSING TOC: >>>>>>>>>>>>>>> pg_restore: [archiver (db)] Error from TOC entry 184; 1259 >>>>>>>>>>>>>>> 65659 TABLE fiware_test_terrain sami >>>>>>>>>>>>>>> pg_restore: [archiver (db)] could not execute query: ERROR: >>>>>>>>>>>>>>> role "sami" does not exist >>>>>>>>>>>>>>> Command was: ALTER TABLE public.fiware_test_terrain OWNER >>>>>>>>>>>>>>> TO sami; >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> pg_restore: [archiver (db)] Error from TOC entry 183; 1259 >>>>>>>>>>>>>>> 65657 SEQUENCE fiware_test_terrain_id_seq sami >>>>>>>>>>>>>>> pg_restore: [archiver (db)] could not execute query: ERROR: >>>>>>>>>>>>>>> role "sami" does not exist >>>>>>>>>>>>>>> Command was: ALTER TABLE public.fiware_test_terrain_id_seq >>>>>>>>>>>>>>> OWNER TO sami; >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> WARNING: errors ignored on restore: 2 >>>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I checked the information stored from backup on the database >>>>>>>>>>>>>>> and found the following tables, which I am not sure if they are all or >>>>>>>>>>>>>>> there are some missing. >>>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>>> List of relations >>>>>>>>>>>>>>> Schema | Name | Type | Owner >>>>>>>>>>>>>>> --------+----------------------------+----------+---------- >>>>>>>>>>>>>>> public | fiware_test_terrain | table | postgres >>>>>>>>>>>>>>> public | fiware_test_terrain_id_seq | sequence | postgres >>>>>>>>>>>>>>> public | geography_columns | view | postgres >>>>>>>>>>>>>>> public | geometry_columns | view | postgres >>>>>>>>>>>>>>> public | raster_columns | view | postgres >>>>>>>>>>>>>>> public | raster_overviews | view | postgres >>>>>>>>>>>>>>> public | spatial_ref_sys | table | postgres >>>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I did not continue because it seems that there are some >>>>>>>>>>>>>>> errors that I should first understand and fix before continuing. >>>>>>>>>>>>>>> If you need something else from my side, please let me know. >>>>>>>>>>>>>>> And please, let me know if I have done something wrong. >>>>>>>>>>>>>>> Thank you. Best regards, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> 2015-06-02 8:33 GMT+00:00 Ibon Salbidegoitia < >>>>>>>>>>>>>>> ibon.salbi at gmail.com>: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Sorry for the delay, I was busy and these last 3 days I had >>>>>>>>>>>>>>>> some problems with tomcat so I decided to format everything and start from >>>>>>>>>>>>>>>> the beginning to know what errors are happening. >>>>>>>>>>>>>>>> I will try to explain cronologically all the steps and >>>>>>>>>>>>>>>> error/bugs found. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> First of all I update git repository and change to the >>>>>>>>>>>>>>>> "fiware_rel_4.x" branch to create the WAR file with the maven command: mvn >>>>>>>>>>>>>>>> install -DdownloadSources=true -DskipTests=true -Pw3ds >>>>>>>>>>>>>>>> After restarting tomcat, the geoserver seems to work -> >>>>>>>>>>>>>>>> http://151.80.143.120:8080/geoserver (User: admin / >>>>>>>>>>>>>>>> Pass: geoserver) >>>>>>>>>>>>>>>> I did not use the WAR published, I created my own from the >>>>>>>>>>>>>>>> new github branch as you see. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> So then I decided to update the test unit plan. Here I have >>>>>>>>>>>>>>>> one comment just to improve in case you want. I have checked that you >>>>>>>>>>>>>>>> usually use "space" on folders and files which usually is no suitable. I >>>>>>>>>>>>>>>> refer specificly to the 4.3.2 version. >>>>>>>>>>>>>>>> + The ZIP file has a "space" on the name what requires >>>>>>>>>>>>>>>> to use ASCI character to download: wget --no-check-certificate >>>>>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>>>>>>> + When ZIP is decompressed, the name of the folder has >>>>>>>>>>>>>>>> also a "space": /home/UnitTestPlan/rel\ 4.3.2 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> 2015-05-26 12:49 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> That problem should now be fixed, code is in the github ( >>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver/tree/fiware_rel_4.x) >>>>>>>>>>>>>>>>> and we have also published new war file in Fiware FusionForge ( >>>>>>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1643/geoserver.war >>>>>>>>>>>>>>>>> ). >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> We also updated test assets and reference client. Updated >>>>>>>>>>>>>>>>> reference client is already available from the Github and test assets will >>>>>>>>>>>>>>>>> be published later today or tomorrow morning to FusionForge under release >>>>>>>>>>>>>>>>> 4.3.2 (https://forge.fiware.org/frs/?group_id=7). >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I hope that this release will fix problems you encountered >>>>>>>>>>>>>>>>> earlier. Please report back did this solve those problems. Thank you for >>>>>>>>>>>>>>>>> submitting these bug reports. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Tue, May 26, 2015 at 9:33 AM, Juha Hyv?rinen < >>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> We have looked into that problem now for couple of days >>>>>>>>>>>>>>>>>> and it seems to be somehow related to Tomcat and system locale settings. We >>>>>>>>>>>>>>>>>> can reproduce same problem when we deploy to a Tomcat instance while with >>>>>>>>>>>>>>>>>> Jetty everything works just fine. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I'm working with the fix now, but there is also a >>>>>>>>>>>>>>>>>> workaround: deploy war package to a Jetty instance. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I will notify you once I have pushed code changes to git. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Fri, May 22, 2015 at 1:08 PM, Juha Hyv?rinen < >>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I also forgot to mention that you should move to newer >>>>>>>>>>>>>>>>>>> test client which we will release officially during summer, but code is >>>>>>>>>>>>>>>>>>> already available from the Github: >>>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/Cyber-WeX >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Client code can be found from here: >>>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/Cyber-WeX/tree/master/GIS/GIS_Client_xml3d >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Fri, May 22, 2015 at 12:30 PM, Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> I have to admit that I'm clueless with that terrain >>>>>>>>>>>>>>>>>>>> problem, since I couldn't replicate it. Everything seems to be right at the >>>>>>>>>>>>>>>>>>>> server side but still data is somehow corrupted when it arrives to the >>>>>>>>>>>>>>>>>>>> client. We have deployed that same data set without any problems to more >>>>>>>>>>>>>>>>>>>> than 20 different systems by many different users during our internal >>>>>>>>>>>>>>>>>>>> development and testing. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> There are still few points which you could try. >>>>>>>>>>>>>>>>>>>> 1. Install newer PostGIS version for example from >>>>>>>>>>>>>>>>>>>> Ubuntu repositories instead of manually build one. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> 2. Try our upcoming release of Geoserver from Github. >>>>>>>>>>>>>>>>>>>> This shouldn't be difficult, since you already build your own version. >>>>>>>>>>>>>>>>>>>> If you used git to clone code earlier, you only need to >>>>>>>>>>>>>>>>>>>> pull new changes from the repository and change code branch from fiware to >>>>>>>>>>>>>>>>>>>> fiware_rel_4.x (git pull && git checkout fiware_rel_4.x) and rebuild >>>>>>>>>>>>>>>>>>>> project. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Also I created database dump from building coordinates >>>>>>>>>>>>>>>>>>>> table and it's as an attachment. We will add it also to the assets and >>>>>>>>>>>>>>>>>>>> update documentation once we have little spare time to do it. Table can be >>>>>>>>>>>>>>>>>>>> restored with command: sudo -u postgres psql databasename < >>>>>>>>>>>>>>>>>>>> path/to/the/file.sql >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Before restoring that dumb, change URLs in it to point >>>>>>>>>>>>>>>>>>>> a place where you actually have that xml file. At the moment URL is >>>>>>>>>>>>>>>>>>>> http://localhost/Test_asset/Building_model/building.xml >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Thu, May 21, 2015 at 1:09 PM, Ibon Salbidegoitia < >>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> You are right, I forgot to edit the tomcat7 default >>>>>>>>>>>>>>>>>>>>> start-up configuration file. >>>>>>>>>>>>>>>>>>>>> Now is using openJDK. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> 2015-05-21 9:36 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Could you restart tomcat again since it still uses >>>>>>>>>>>>>>>>>>>>>> Oracle java 1.8. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Thu, May 21, 2015 at 10:57 AM, Ibon Salbidegoitia >>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I checked that tomcat was down due to low xmx size. >>>>>>>>>>>>>>>>>>>>>>> I restarted and modify xmx to avoid errors. >>>>>>>>>>>>>>>>>>>>>>> Asnwering to your comments: >>>>>>>>>>>>>>>>>>>>>>> + Please let me know when you update the >>>>>>>>>>>>>>>>>>>>>>> documentation to check importin building coordinates >>>>>>>>>>>>>>>>>>>>>>> + I imported with following command of postgres: >>>>>>>>>>>>>>>>>>>>>>> $ su - postgres >>>>>>>>>>>>>>>>>>>>>>> $ createdb fiware_test >>>>>>>>>>>>>>>>>>>>>>> $ pg_restore -d fiware_test >>>>>>>>>>>>>>>>>>>>>>> ./Test_asset_3.3/PostGIS_database_backup\ /FIWARE-postgis-test_asset >>>>>>>>>>>>>>>>>>>>>>> Because I am using remote server I cannot use >>>>>>>>>>>>>>>>>>>>>>> pgadmin, but the import was correct without errors and I checked that the >>>>>>>>>>>>>>>>>>>>>>> data was correct. >>>>>>>>>>>>>>>>>>>>>>> + I am using Oracle java (1.8.0_31), so I will >>>>>>>>>>>>>>>>>>>>>>> change it to openJDK7 as you recommend. Now is changed to openJDK7 to >>>>>>>>>>>>>>>>>>>>>>> version 1.7.0_79 >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> As I said, the Geoserver is active, so you can check >>>>>>>>>>>>>>>>>>>>>>> on it whatever you want. >>>>>>>>>>>>>>>>>>>>>>> Kind regards, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> 2015-05-21 6:56 GMT+00:00 Juha Hyv?rinen < >>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I was looking into those errors you reported but >>>>>>>>>>>>>>>>>>>>>>>> your server went down before I could figure out any final solution. Here >>>>>>>>>>>>>>>>>>>>>>>> are m >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> -- Juha Hyv?rinen Software Engineer Cyberlightning Ltd. email. juha.hyvarinen at cyberlightning.com See our new press release: http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ www.cyberlightning.com This e-mail and all attached material are confidential and may contain legally privileged information. If you are not the intended recipient, please contact the sender and delete the e-mail from your system without producing, distributing or retaining copies thereof. -------------- next part -------------- An HTML attachment was scrubbed... URL: From ibon.salbi at gmail.com Mon Jul 27 15:25:09 2015 From: ibon.salbi at gmail.com (Ibon Salbi) Date: Mon, 27 Jul 2015 15:25:09 +0200 Subject: [Fiware-finodex-coaching] W3DS - FIWARE In-Reply-To: References: Message-ID: Hi Juha, Thank you for the 3 comments. Right now, I am on holidays, but next week I will check everything and I will come back to you with the results. Kind regards, Ibon El 27/07/2015, a las 14:58, Juha Hyv?rinen escribi?: > Hi Ibon, > > Here's what I found out about your reported problems. > > 1. I lookd into your test data and elevation data seemed to be correct. Since all customer level monitors can only show 8 bit colors, previewing image with higher color depth will be normalized to 8 bit images and all color values are recomputed to that scale. When you zoom into "white" only are, you will see more details also in preview window. You can also view raw pixel values just by clicking a spot you want more info from. > > 2. I noticed that srs value is hard coded into demo client code and therefor it's incorrect for your dataset. > It is defined in scenemngr.js file in line 257: var srs = "&srs=EPSG:3067"; > For your data it should be: var srs = "&srs=EPSG:25830" > > I haven't worked with current demo client code, so I'm not sure how that part of code could be made more dynamic and I'm also not sure if Sami will have time for that after he returns from his vacation. For now quick fix is to change that value to code. It's also worth to note that demo client is delivered only for demonstration purposes and therefore it's not guaranteed to work with all possible datasets. > > 3. Problem with textures not showing could be related to the fact that terrain and texture are defined in different coordinate systems and client is not able to handle that situation. As noted earlier I'm not familiar with client code and debugging that will take some time. From the server side everything seems to be just fine. > > - Juha > > > On Mon, Jul 27, 2015 at 11:24 AM, Ibon Salbi wrote: >> Hi Juha, >> >> Thank you. If you have any problem or doubts about my explanations, do not hesitate to ask me whatever you need to be clarified. >> Kind regards, >> >> Ibon >> >> >> El 27/07/2015, a las 07:58, Juha Hyv?rinen escribi?: >> >>> Hi Ibon, >>> >>> I just returned from my summer vacation and I will look into that problem as soon as it's possible. >>> >>> - Juha >>> >>> On Mon, Jul 13, 2015 at 2:16 PM, Ibon Salbidegoitia wrote: >>>> Hi Juha, >>>> >>>> I have seen from an automatic reply email that Sami is going to be on holidays till 31st of July. Is there any other technical support who can give me feedback about the Fiware Enabler developed by Cyberlightning? >>>> Best regards, >>>> >>>> Ibon >>>> >>>> >>>> 2015-07-13 11:10 GMT+00:00 Ibon Salbidegoitia : >>>>> Hi Sami, >>>>> >>>>> I haven't received reply for the issue I told you in my previous email. >>>>> Can you please confirm me that you received? If so, can you tell me the situation? >>>>> Should I put Juha in Cc for all this process? >>>>> Thank you in advance. Best regards, >>>>> >>>>> Ibon >>>>> >>>>> >>>>> 2015-07-01 17:20 GMT+00:00 Ibon Salbidegoitia : >>>>>> Hi Sami, >>>>>> >>>>>> First of all, as I mentioned in a previous email, I have put in Cc our Fiware Accelerator (Finodex) coaches as they requested in a meeting with them to follow the situation of each project that they are supporting. >>>>>> >>>>>> About your previous email, the last release is working! I have test it in our test server (http://151.80.143.120/GIS_4.3.3/) and the DEM works with the data provided as test. >>>>>> I have checked that the test requires the textures to have "texture" on their names and "DEM" for terrain DEM. I have upload my data to test it but I have the following problems: >>>>>> When I preview your DEM (DEM_geotiff_terrain_EPSG3067) I can see on geoserver a grayscale image on openlayers (openlayers example). >>>>>> >>>>>> I have seen that the tiff is a float32 image in grayscale with a 281.604 minimum value and 792.834 maximum value . >>>>>> >>>>>> I have upload a similar DEM called "DEM_ODE_terrain" that it can be selected from the DEM GIS Client example (on previous link). This image is also float32 tiff with a minimum value of -3.40282e+38 and maximum of 1545.84, where minimum value is a NoData value as it is shown with gdalinfo command: NoData Value=-3.4028234663852886e+38 >>>>>> The TIF image I use it can be found here: ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip >>>>>> The geodesic system of this TIF is ETRS89 that correponds to SRS EPSG:25830. However the preview seems to be a 0-1 grayscale image as you can see here (takes some seconds as it is big). This could be due to the NoData values that make range so big not taking into account that the data does not exist. This is correct? >>>>>> >>>>>> The Terrain texture also has been uploaded to Geoserver as can be seen here. >>>>>> The DEM testing client gives the oportunity to select both layers mentioned (for terrain DEM + terrain texture), however nothing appears, only one small gray square looking upwards (on zenith) with the camera on the client as the altitudes are higher than the ones from the examples. >>>>>> So everything from test seems to work correctly, but when I introduce my data, the DEM test client does not seem to work. >>>>>> Could it be due to NoData values? Anyway, why the ortophoto inserted is shown as gray layer? >>>>>> >>>>>> Best regards, >>>>>> Ibon >>>>>> >>>>>> >>>>>> 2015-06-30 11:33 GMT+00:00 Sami J : >>>>>>> Hi Ibon, >>>>>>> sorry about late response. We have now made new release from both server and example client, these can be found from the forge under MIWI-GISDataProvider 4.3.3-release: https://forge.fiware.org/frs/?group_id=7 >>>>>>> source code has been uploaded also to the github. >>>>>>> >>>>>>> Short documentation related using DEM images can be found from: http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide#World_Wind_Format_Module >>>>>>> >>>>>>> Installation document covers how to upload DEM image to geoserver: http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Installation_and_Administration_Guide#GeoTIFF_based_.28DEM.29_data_sets_for_elevation >>>>>>> >>>>>>> >>>>>>> Regarding using latitude/longitude coordinates, I don't know if you are using them or not. I just wanted to mention this if you haven't noticed this information from the GIS GE documentation :) To elaborate further, provided GIS GE example web client has been implemented so that it works correctly only with metric coordinate system. Using lat/long data source won't work with the provided client, and that's why lat/long coordinate handling needs to be implemented by yourself. But as said, I don't know if you are using data source based in latitude/longitudes or metric coordinates. >>>>>>> >>>>>>> >>>>>>> Best regards, >>>>>>> Sami >>>>>>> >>>>>>> On Thu, Jun 25, 2015 at 11:53 AM, Ibon Salbidegoitia wrote: >>>>>>>> Hi Sami, >>>>>>>> >>>>>>>> I have a couple of things to ask. >>>>>>>> It is great that the grayscale images for elevation is pretty much ready. Can you tell me when do you expect to finish the test and when I can be able to test it? >>>>>>>> About the last paragraph, I do not understand why you tell me that lat/long is not supported. Where I have used it? Do you refer to the bounding box of the layers I have upload? So do I have to change the SRS to EPSG:25830 for example instead of EPSG:4326? >>>>>>>> Best regards, >>>>>>>> Ibon >>>>>>>> >>>>>>>> >>>>>>>> 2015-06-24 14:22 GMT+00:00 Sami J : >>>>>>>>> Hi Ibon, >>>>>>>>> ok now it's clear; in a short problem is that elevation data in grayscale image is not yet supported by the GIS GE. >>>>>>>>> >>>>>>>>> The good thing is that implementation for it is pretty much ready, we are doing final testing for it and then documentation will be updated. So soon it is possible to use grayscale elevation images as for source to elevation data, GIS GE implementation supports same data format as SRTM data uses. GIS GE will send response data in octet-stream format, client itself needs to create 3D objects based on the octet-stream data. >>>>>>>>> >>>>>>>>> please note that current version of the GIS GE reference web client only supports metric coordinates, Lat/log is not working. I mention this because if you'd like to use GIS data in Lat/Log format, the client scenemanager logic needs to be re-implemented. >>>>>>>>> >>>>>>>>> Best regards, >>>>>>>>> Sami >>>>>>>>> >>>>>>>>> >>>>>>>>> On Wed, Jun 24, 2015 at 10:10 AM, Ibon Salbidegoitia wrote: >>>>>>>>>> Hi Sami, >>>>>>>>>> >>>>>>>>>> I have upload the ortophoto on "fiware" workspace and also texture with appropriate names to be able to see them in my Client examples: >>>>>>>>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml >>>>>>>>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml >>>>>>>>>> >>>>>>>>>> As you will see, selecting the terrain texture, the new layer appears (surprisingly, the one of other workspace also). But if I try to select the terrain layer (first box of GIS client), you will see that the one uploaded with the name "ODE_test_terrain" does not appear. Maybe I didn't explain correctly in my previous email, but this layer is the altitude layer, the shape. So I suppose that the W3DS options have to be defined, but if you access to that layer on our testing server (http://151.80.143.120:8080/geoserver . User: admin Pass: geoserver) you will see that I cannot access to the W3DS tab of "ODE_test_terrain" layer to make it "Active" and "Queryable" and maybe other options required on the GIS client to be able to require it as the shape of the terrain. >>>>>>>>>> >>>>>>>>>> Which could be the problem? >>>>>>>>>> >>>>>>>>>> Just one more thing. I am selected on one of the FIWARE accelerators (Finodex) to develop services with Fiware tools. As you imagine, this enabler is one that I am using. They required me to put them (fiware coaches of Finodex accelerator) in CC on this discussion emails to follow the evolution of our project. So I will put them in CC on the next email. I suppose there is no problem on this, is it? >>>>>>>>>> >>>>>>>>>> Best regards, >>>>>>>>>> Ibon >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> 2015-06-23 8:38 GMT+02:00 Sami J : >>>>>>>>>>> Hi Ibon, >>>>>>>>>>> thank you for the feedback, I need to update user guide about this issue. Textures are queried via geoserver's WMS-interface. This interface isn't related to W3DS-module and therefore there's no need to declare W3DS related options for the texture layer. So when you define texture layer which you want to use as a texture for 3D terrain, it is enough to define options under "Data"-tab. >>>>>>>>>>> >>>>>>>>>>> Best regards, >>>>>>>>>>> Sami >>>>>>>>>>> >>>>>>>>>>> On Mon, Jun 22, 2015 at 6:21 PM, Ibon Salbidegoitia wrote: >>>>>>>>>>>> Hi Sami, >>>>>>>>>>>> >>>>>>>>>>>> Thank you. Yes I knew that because I saw it in the JS code you mention. >>>>>>>>>>>> I was going to change the ortophoto and texture to workspace to "fiware" for that reason, but being honest I didn't test it because I found the error I described in my previous email. I mean, I was trying to access the texture layer W3DS tab to make it "Active" and "Queryable" as required on the wiki, so that's the reason I sent you the error, because I though that it wouldn't be possible to go ahead without changing the texture the configuration. >>>>>>>>>>>> >>>>>>>>>>>> So, if I am wrong and it is not necessary to configure the W3DS tab, I will try it. I don't need from you to change the JS code to find texture and photos of all the workspace. I will change the data to "fiware" workspae. >>>>>>>>>>>> >>>>>>>>>>>> I will tell you if everything goes well. >>>>>>>>>>>> Best regards, >>>>>>>>>>>> >>>>>>>>>>>> Ibon >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> 2015-06-22 9:05 GMT+02:00 Sami J : >>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>> nice to hear you have been able to progress in your work! >>>>>>>>>>>>> >>>>>>>>>>>>> Let me answer behalf Juha: Your texture data seems to be ok. In case you are using GIS GE reference client problem with the texture loading might be with the used workspace. GIS GE reference client assumes that all data is in "fiware"-workspace. This applies also for the textures. So changing texture workspace to "fiware" might solve loading problem. >>>>>>>>>>>>> >>>>>>>>>>>>> If you'd like to modify reference client to support also other workspaces, URI for texture loading is defined in the scenemngr.js getElements-function. You can modify URL created in there. >>>>>>>>>>>>> >>>>>>>>>>>>> Best regards, >>>>>>>>>>>>> Sami >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On Mon, Jun 22, 2015 at 9:05 AM, Juha Hyv?rinen wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> ---------- Forwarded message ---------- >>>>>>>>>>>>>> From: Ibon Salbidegoitia >>>>>>>>>>>>>> Date: Thu, Jun 18, 2015 at 11:05 AM >>>>>>>>>>>>>> Subject: Re: W3DS - FIWARE >>>>>>>>>>>>>> To: Juha Hyv?rinen >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>> >>>>>>>>>>>>>> I checked that many changes where done on the data and wiki. Congratulations! Now everything is very clear! >>>>>>>>>>>>>> >>>>>>>>>>>>>> I write you because I have some doubts about the texture data. On the wiki "User and Programmers Guide" section "3.3.3 Adding texture" the last sentence says that one option is to store texture on a GeoTIFF. >>>>>>>>>>>>>> I used the following GeoTIFF texture (MDT) data on float32 format to try it. You can download it here: ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip >>>>>>>>>>>>>> >>>>>>>>>>>>>> The file has been uploaded to Geoserver. As it does not recognize the SRS, I defined whichis the EPSG:25830. >>>>>>>>>>>>>> As it says in the Unit Testing Plan, I have to go to W3DS tab to activate and make it queryable. >>>>>>>>>>>>>> However, it returns an error on JIRA. >>>>>>>>>>>>>> >>>>>>>>>>>>>> You can check it in our geoserver: >>>>>>>>>>>>>> http://151.80.143.120:8080/geoserver/ >>>>>>>>>>>>>> + User: admin >>>>>>>>>>>>>> + Pass: geoserver >>>>>>>>>>>>>> >>>>>>>>>>>>>> The GeoTIFF texture is defined on the layer "terrain" , on workspace "ODE" >>>>>>>>>>>>>> Please let me know why this option is not available. >>>>>>>>>>>>>> Best regards, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> 2015-06-02 18:20 GMT+02:00 Ibon Salbidegoitia : >>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I have been able to run GIS Client examples: >>>>>>>>>>>>>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml >>>>>>>>>>>>>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> As you can see in the attached pictures, there seems to be some problems with space between layers and I cannot see the xml3d buildings on the examples. >>>>>>>>>>>>>>> Do you know where the buildings should appear? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Just as comment, I have found more bugs that may improve the Unit Testing Plan. I list all of them below if you are interested on changing them >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On wiki: >>>>>>>>>>>>>>> 1.2.2.4 PostGIS connection to GeoServer >>>>>>>>>>>>>>> + When Publish fiware_test_terrain PostGIS - PostGIS Database >>>>>>>>>>>>>>> In "Objects Attributes" section select "name" for the "Object ID" it is not possible because only options are [elevation / geom / lod]. The documentation seems to need to select "name" when it does not exist. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> 1.2.3.2 terrain_texture_orto.tif and terrain_texture_raster.tif >>>>>>>>>>>>>>> + Raster_map_image_for_terrain_texture/terrain_texture_raster.tif >>>>>>>>>>>>>>> SRS is automatically set to EPSG:404000. Not EPSG:3067 as it is said on the wiki >>>>>>>>>>>>>>> + Aero_photo_for_terrain_texture/terrain_texture_orto.tif >>>>>>>>>>>>>>> SRS is automatically set to EPSG:3067. Not EPSG:404000 as it is said on the wiki >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On GIS Client: >>>>>>>>>>>>>>> Version 4.3.2 >>>>>>>>>>>>>>> + The both examples () have changed the script "map.js" and now it is not automatically defined "baseUrl" variable as previous version 4.2.2. It will be recommended to use the code lines: >>>>>>>>>>>>>>> var ip = location.host; >>>>>>>>>>>>>>> var baseUrl = "http://"+ip+"/geoserver/"; >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On MIWI-GISDataProvider download section: >>>>>>>>>>>>>>> + Version 4.3.2 >>>>>>>>>>>>>>> - Test assest 4.3.2 ZIP file has a space between text and version numbers -> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>>>>>> - ZIP file when decompressed has a folder with a space between text ("rel") and numbers ("4.3.2") -> rel\ 4.3.2 >>>>>>>>>>>>>>> - Subfolders of Test_assest "Building_coordinates /" and "PostGIS_database_backup /" have a space at the end of the name. >>>>>>>>>>>>>>> + Version 4.2.2 >>>>>>>>>>>>>>> - Subfolders of Test_assest "Building_coordinates /" and "PostGIS_database_backup /" have a space at the end of the name. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Best regards, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> 2015-06-02 11:59 GMT+00:00 Juha Hyv?rinen : >>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Thank you for feedback about test asset naming problems, I wasn't aware of those and I have informed my colleague who have made those packages. He will fix those tomorrow. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Building coordinates are needed if you want to use external 3D models in your application with real spatial information. For example hand made building models placed in correct position etc. If you don't need those then that step is optional. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> We also updated guide for database restoring and it can be found from here: https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan#Import_PostGIS_database_backup_with_terrain_data >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Your problem was that username in the database backup was defined to be 'sami' and it does not exist in your system. It is fixed by ignoring username from the database backup. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Before restoring that database backup you should drop fiware_test_terrain table. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Let me know if this was helpful. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Tue, Jun 2, 2015 at 11:41 AM, Ibon Salbidegoitia wrote: >>>>>>>>>>>>>>>>> Sorry I send previous email without finishing the email as error. You have below all the email. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Sorry for the delay, I was busy and these last 3 days I had some problems with tomcat so I decided to format everything and start from the beginning to know what errors are happening. >>>>>>>>>>>>>>>>> I will try to explain cronologically all the steps and error/bugs found. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> First of all I update git repository and change to the "fiware_rel_4.x" branch to create the WAR file with the maven command: mvn install -DdownloadSources=true -DskipTests=true -Pw3ds >>>>>>>>>>>>>>>>> After restarting tomcat, the geoserver seems to work -> http://151.80.143.120:8080/geoserver (User: admin / Pass: geoserver) >>>>>>>>>>>>>>>>> I did not use the WAR published, I created my own from the new github branch as you see. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> So then I decided to update the test unit plan. Here I have one comment just to improve in case you want. I have checked that you usually use "space" on folders and files which usually is no suitable. I refer specificly to the 4.3.2 version. >>>>>>>>>>>>>>>>> + The ZIP file has a "space" on the name what requires to use ASCI character to download: wget --no-check-certificate https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>>>>>>>> + When ZIP is decompressed, the name of the folder has also a "space": /home/UnitTestPlan/rel\ 4.3.2 >>>>>>>>>>>>>>>>> + PostGIS database backup has also a "space" at the end: /home/UnitTestPlan/rel\ 4.3.2/PostGIS_database_backup\ / >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Any way, I continue with the database restore. On the PostGIS database backup, I checked on the 4.3.2 version that there are 2 files: building_coordinates and test_asset-terrain. >>>>>>>>>>>>>>>>> The "building_coordinates" file appears to be a text format dump. So is this file necessary to upload to database? >>>>>>>>>>>>>>>>> The "test_asset-terrain" could be uploaded to postgres with the following command: pg_restore -d fiware_test /home/UnitTestPlan/rel\ 4.3.2/PostGIS_database_backup\ /FIWARE-postgis-test_asset-terrain >>>>>>>>>>>>>>>>> However, I receive the following errors: >>>>>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>>>>> pg_restore: [archiver (db)] Error while PROCESSING TOC: >>>>>>>>>>>>>>>>> pg_restore: [archiver (db)] Error from TOC entry 184; 1259 65659 TABLE fiware_test_terrain sami >>>>>>>>>>>>>>>>> pg_restore: [archiver (db)] could not execute query: ERROR: role "sami" does not exist >>>>>>>>>>>>>>>>> Command was: ALTER TABLE public.fiware_test_terrain OWNER TO sami; >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> pg_restore: [archiver (db)] Error from TOC entry 183; 1259 65657 SEQUENCE fiware_test_terrain_id_seq sami >>>>>>>>>>>>>>>>> pg_restore: [archiver (db)] could not execute query: ERROR: role "sami" does not exist >>>>>>>>>>>>>>>>> Command was: ALTER TABLE public.fiware_test_terrain_id_seq OWNER TO sami; >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> WARNING: errors ignored on restore: 2 >>>>>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I checked the information stored from backup on the database and found the following tables, which I am not sure if they are all or there are some missing. >>>>>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>>>>> List of relations >>>>>>>>>>>>>>>>> Schema | Name | Type | Owner >>>>>>>>>>>>>>>>> --------+----------------------------+----------+---------- >>>>>>>>>>>>>>>>> public | fiware_test_terrain | table | postgres >>>>>>>>>>>>>>>>> public | fiware_test_terrain_id_seq | sequence | postgres >>>>>>>>>>>>>>>>> public | geography_columns | view | postgres >>>>>>>>>>>>>>>>> public | geometry_columns | view | postgres >>>>>>>>>>>>>>>>> public | raster_columns | view | postgres >>>>>>>>>>>>>>>>> public | raster_overviews | view | postgres >>>>>>>>>>>>>>>>> public | spatial_ref_sys | table | postgres >>>>>>>>>>>>>>>>> ================================================= >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I did not continue because it seems that there are some errors that I should first understand and fix before continuing. >>>>>>>>>>>>>>>>> If you need something else from my side, please let me know. And please, let me know if I have done something wrong. >>>>>>>>>>>>>>>>> Thank you. Best regards, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Ibon >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> 2015-06-02 8:33 GMT+00:00 Ibon Salbidegoitia : >>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Sorry for the delay, I was busy and these last 3 days I had some problems with tomcat so I decided to format everything and start from the beginning to know what errors are happening. >>>>>>>>>>>>>>>>>> I will try to explain cronologically all the steps and error/bugs found. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> First of all I update git repository and change to the "fiware_rel_4.x" branch to create the WAR file with the maven command: mvn install -DdownloadSources=true -DskipTests=true -Pw3ds >>>>>>>>>>>>>>>>>> After restarting tomcat, the geoserver seems to work -> http://151.80.143.120:8080/geoserver (User: admin / Pass: geoserver) >>>>>>>>>>>>>>>>>> I did not use the WAR published, I created my own from the new github branch as you see. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> So then I decided to update the test unit plan. Here I have one comment just to improve in case you want. I have checked that you usually use "space" on folders and files which usually is no suitable. I refer specificly to the 4.3.2 version. >>>>>>>>>>>>>>>>>> + The ZIP file has a "space" on the name what requires to use ASCI character to download: wget --no-check-certificate https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip >>>>>>>>>>>>>>>>>> + When ZIP is decompressed, the name of the folder has also a "space": /home/UnitTestPlan/rel\ 4.3.2 >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> 2015-05-26 12:49 GMT+00:00 Juha Hyv?rinen : >>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> That problem should now be fixed, code is in the github (https://github.com/Cyberlightning/geoserver/tree/fiware_rel_4.x) and we have also published new war file in Fiware FusionForge (https://forge.fiware.org/frs/download.php/1643/geoserver.war). >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> We also updated test assets and reference client. Updated reference client is already available from the Github and test assets will be published later today or tomorrow morning to FusionForge under release 4.3.2 (https://forge.fiware.org/frs/?group_id=7). >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I hope that this release will fix problems you encountered earlier. Please report back did this solve those problems. Thank you for submitting these bug reports. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Tue, May 26, 2015 at 9:33 AM, Juha Hyv?rinen wrote: >>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> We have looked into that problem now for couple of days and it seems to be somehow related to Tomcat and system locale settings. We can reproduce same problem when we deploy to a Tomcat instance while with Jetty everything works just fine. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> I'm working with the fix now, but there is also a workaround: deploy war package to a Jetty instance. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> I will notify you once I have pushed code changes to git. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Fri, May 22, 2015 at 1:08 PM, Juha Hyv?rinen wrote: >>>>>>>>>>>>>>>>>>>>> I also forgot to mention that you should move to newer test client which we will release officially during summer, but code is already available from the Github: https://github.com/Cyberlightning/Cyber-WeX >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Client code can be found from here: https://github.com/Cyberlightning/Cyber-WeX/tree/master/GIS/GIS_Client_xml3d >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Fri, May 22, 2015 at 12:30 PM, Juha Hyv?rinen wrote: >>>>>>>>>>>>>>>>>>>>>> Hi Ibon, >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I have to admit that I'm clueless with that terrain problem, since I couldn't replicate it. Everything seems to be right at the server side but still data is somehow corrupted when it arrives to the client. We have deployed that same data set without any problems to more than 20 different systems by many different users during our internal development and testing. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> There are still few points which you could try. >>>>>>>>>>>>>>>>>>>>>> 1. Install newer PostGIS version for example from Ubuntu repositories instead of manually build one. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> 2. Try our upcoming release of Geoserver from Github. This shouldn't be difficult, since you already build your own version. >>>>>>>>>>>>>>>>>>>>>> If you used git to clone code earlier, you only need to pull new changes from the repository and change code branch from fiware to fiware_rel_4.x (git pull && git checkout fiware_rel_4.x) and rebuild project. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Also I created database dump from building coordinates table and it's as an attachment. We will add it also to the assets and update documentation once we have little spare time to do it. Table can be restored with command: sudo -u postgres psql databasename < path/to/the/file.sql >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Before restoring that dumb, change URLs in it to point a place where you actually have that xml file. At the moment URL is http://localhost/Test_asset/Building_model/building.xml >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> - Juha >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Thu, May 21, 2015 at 1:09 PM, Ibon Salbidegoitia wrote: >>>>>>>>>>>>>>>>>>>>>>> Hi Juha, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> You are right, I forgot to edit the tomcat7 default start-up configuration file. >>>>>>>>>>>>>>>>>>>>>>> Now is using openJDK. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> 2015-05-21 9:36 GMT+00:00 Juha Hyv?rinen : -------------- next part -------------- An HTML attachment was scrubbed... URL: