Hi Ibon,
I just returned from my summer vacation and I will look into that problem
as soon as it's possible.
- Juha
On Mon, Jul 13, 2015 at 2:16 PM, Ibon Salbidegoitia <ibon.salbi at gmail.com>
wrote:
> Hi Juha,
>
> I have seen from an automatic reply email that Sami is going to be on
> holidays till 31st of July. Is there any other technical support who can
> give me feedback about the Fiware Enabler developed by Cyberlightning?
> Best regards,
>
> Ibon
>
>
> 2015-07-13 11:10 GMT+00:00 Ibon Salbidegoitia <ibon.salbi at gmail.com>:
>
>> Hi Sami,
>>
>> I haven't received reply for the issue I told you in my previous email.
>> Can you please confirm me that you received? If so, can you tell me the
>> situation?
>> Should I put Juha in Cc for all this process?
>> Thank you in advance. Best regards,
>>
>> Ibon
>>
>>
>> 2015-07-01 17:20 GMT+00:00 Ibon Salbidegoitia <ibon.salbi at gmail.com>:
>>
>>> Hi Sami,
>>>
>>> First of all, as I mentioned in a previous email, I have put in Cc our
>>> Fiware Accelerator (Finodex) coaches as they requested in a meeting with
>>> them to follow the situation of each project that they are supporting.
>>>
>>> About your previous email, the last release is working! I have test it
>>> in our test server (http://151.80.143.120/GIS_4.3.3/) and the DEM works
>>> with the data provided as test.
>>> I have checked that the test requires the textures to have "texture" on
>>> their names and "DEM" for terrain DEM. I have upload my data to test it but
>>> I have the following problems:
>>>
>>> 1. When I preview your DEM (DEM_geotiff_terrain_EPSG3067) I can see
>>> on geoserver a grayscale image on openlayers (openlayers example
>>> <http://151.80.143.120:8080/geoserver/fiware/wms?service=WMS&version=1.1.0&request=GetMap&layers=fiware:DEM_geotiff_terrain_EPSG3067&styles=&bbox=374010.0,7547990.0,380020.0,7554000.0&width=512&height=512&srs=EPSG:3067&format=application/openlayers>
>>> ).
>>>
>>> I have seen that the tiff is a float32 image in grayscale with
>>> a 281.604 minimum value and 792.834 maximum value .
>>>
>>> I have upload a similar DEM called "DEM_ODE_terrain" that it can be
>>> selected from the DEM GIS Client example (on previous link). This image is
>>> also float32 tiff with a minimum value of -3.40282e+38 and maximum
>>> of 1545.84, where minimum value is a NoData value as it is shown with
>>> gdalinfo command: NoData Value=-3.4028234663852886e+38
>>> The TIF image I use it can be found here:
>>> ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip
>>> The geodesic system of this TIF is ETRS89 that correponds to SRS
>>> EPSG:25830. However the preview seems to be a 0-1 grayscale image as you
>>> can see here
>>> <http://151.80.143.120:8080/geoserver/fiware/wms?service=WMS&version=1.1.0&request=GetMap&layers=fiware:DEM_ODE_terrain&styles=&bbox=461050.0,4700750.0,606500.0,4811750.0&width=512&height=390&srs=EPSG:25830&format=application/openlayers> (takes
>>> some seconds as it is big). This could be due to the NoData values
>>> that make range so big not taking into account that the data does not
>>> exist. This is correct?
>>>
>>> 2. The Terrain texture also has been uploaded to Geoserver as can be
>>> seen here
>>> <http://151.80.143.120:8080/geoserver/fiware/wms?service=WMS&version=1.1.0&request=GetMap&layers=fiware:ODE_terrain_texture_orto&styles=&bbox=-3.480675981601883,42.457568610196404,-1.6858572736097794,43.45901565397562&width=591&height=330&srs=EPSG:4326&format=application/openlayers>
>>> .
>>> The DEM testing client gives the oportunity to select both layers
>>> mentioned (for terrain DEM + terrain texture), however nothing appears,
>>> only one small gray square looking upwards (on zenith) with the camera on
>>> the client as the altitudes are higher than the ones from the examples.
>>>
>>> So everything from test seems to work correctly, but when I introduce my
>>> data, the DEM test client does not seem to work.
>>> Could it be due to NoData values? Anyway, why the ortophoto inserted is
>>> shown as gray layer?
>>>
>>> Best regards,
>>> Ibon
>>>
>>>
>>> 2015-06-30 11:33 GMT+00:00 Sami J <sami.jylkka at cyberlightning.com>:
>>>
>>>> Hi Ibon,
>>>> sorry about late response. We have now made new release from both
>>>> server and example client, these can be found from the forge under *MIWI-GISDataProvider
>>>> 4.3.3*-release: https://forge.fiware.org/frs/?group_id=7
>>>> source code has been uploaded also to the github.
>>>>
>>>> Short documentation related using DEM images can be found from:
>>>> http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide#World_Wind_Format_Module
>>>>
>>>> Installation document covers how to upload DEM image to geoserver:
>>>> http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Installation_and_Administration_Guide#GeoTIFF_based_.28DEM.29_data_sets_for_elevation
>>>>
>>>>
>>>> Regarding using latitude/longitude coordinates, I don't know if you are
>>>> using them or not. I just wanted to mention this if you haven't noticed
>>>> this information from the GIS GE documentation :) To elaborate further,
>>>> provided GIS GE example web client has been implemented so that it works
>>>> correctly only with metric coordinate system. Using lat/long data source
>>>> won't work with the provided client, and that's why lat/long coordinate
>>>> handling needs to be implemented by yourself. But as said, I don't know if
>>>> you are using data source based in latitude/longitudes or metric
>>>> coordinates.
>>>>
>>>>
>>>> Best regards,
>>>> Sami
>>>>
>>>> On Thu, Jun 25, 2015 at 11:53 AM, Ibon Salbidegoitia <
>>>> ibon.salbi at gmail.com> wrote:
>>>>
>>>>> Hi Sami,
>>>>>
>>>>> I have a couple of things to ask.
>>>>>
>>>>> 1. It is great that the grayscale images for elevation is pretty
>>>>> much ready. Can you tell me when do you expect to finish the test and when
>>>>> I can be able to test it?
>>>>> 2. About the last paragraph, I do not understand why you tell me
>>>>> that lat/long is not supported. Where I have used it? Do you refer to the
>>>>> bounding box of the layers I have upload? So do I have to change the SRS to
>>>>> EPSG:25830 for example instead of EPSG:4326?
>>>>>
>>>>> Best regards,
>>>>> Ibon
>>>>>
>>>>>
>>>>> 2015-06-24 14:22 GMT+00:00 Sami J <sami.jylkka at cyberlightning.com>:
>>>>>
>>>>>> Hi Ibon,
>>>>>> ok now it's clear; in a short problem is that elevation data in
>>>>>> grayscale image is not yet supported by the GIS GE.
>>>>>>
>>>>>> The good thing is that implementation for it is pretty much ready, we
>>>>>> are doing final testing for it and then documentation will be updated. So
>>>>>> soon it is possible to use grayscale elevation images as for source to
>>>>>> elevation data, GIS GE implementation supports same data format as SRTM
>>>>>> data uses. GIS GE will send response data in octet-stream format, client
>>>>>> itself needs to create 3D objects based on the octet-stream data.
>>>>>>
>>>>>> please note that current version of the GIS GE reference web client
>>>>>> only supports metric coordinates, Lat/log is not working. I mention this
>>>>>> because if you'd like to use GIS data in Lat/Log format, the client
>>>>>> scenemanager logic needs to be re-implemented.
>>>>>>
>>>>>> Best regards,
>>>>>> Sami
>>>>>>
>>>>>>
>>>>>> On Wed, Jun 24, 2015 at 10:10 AM, Ibon Salbidegoitia <
>>>>>> ibon.salbi at gmail.com> wrote:
>>>>>>
>>>>>>> Hi Sami,
>>>>>>>
>>>>>>> I have upload the ortophoto on "fiware" workspace and also texture
>>>>>>> with appropriate names to be able to see them in my Client examples:
>>>>>>> +
>>>>>>> http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml
>>>>>>> + http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml
>>>>>>>
>>>>>>> As you will see, selecting the terrain texture, the new layer
>>>>>>> appears (surprisingly, the one of other workspace also). But if I try to
>>>>>>> select the terrain layer (first box of GIS client), you will see that the
>>>>>>> one uploaded with the name "ODE_test_terrain" does not appear. Maybe I
>>>>>>> didn't explain correctly in my previous email, but this layer is the
>>>>>>> altitude layer, the shape. So I suppose that the W3DS options have to be
>>>>>>> defined, but if you access to that layer on our testing server (
>>>>>>> http://151.80.143.120:8080/geoserver . User: admin Pass: geoserver)
>>>>>>> you will see that I cannot access to the W3DS tab of "ODE_test_terrain"
>>>>>>> layer to make it "Active" and "Queryable" and maybe other options required
>>>>>>> on the GIS client to be able to require it as the shape of the terrain.
>>>>>>>
>>>>>>> Which could be the problem?
>>>>>>>
>>>>>>> Just one more thing. I am selected on one of the FIWARE accelerators
>>>>>>> (Finodex) to develop services with Fiware tools. As you imagine, this
>>>>>>> enabler is one that I am using. They required me to put them (fiware
>>>>>>> coaches of Finodex accelerator) in CC on this discussion emails to follow
>>>>>>> the evolution of our project. So I will put them in CC on the next email. I
>>>>>>> suppose there is no problem on this, is it?
>>>>>>>
>>>>>>> Best regards,
>>>>>>> Ibon
>>>>>>>
>>>>>>>
>>>>>>> 2015-06-23 8:38 GMT+02:00 Sami J <sami.jylkka at cyberlightning.com>:
>>>>>>>
>>>>>>>> Hi Ibon,
>>>>>>>> thank you for the feedback, I need to update user guide about this
>>>>>>>> issue. Textures are queried via geoserver's WMS-interface. This interface
>>>>>>>> isn't related to W3DS-module and therefore there's no need
>>>>>>>> to declare W3DS related options for the texture layer. So when you
>>>>>>>> define texture layer which you want to use as a texture for 3D terrain, it
>>>>>>>> is enough to define options under "Data"-tab.
>>>>>>>>
>>>>>>>> Best regards,
>>>>>>>> Sami
>>>>>>>>
>>>>>>>> On Mon, Jun 22, 2015 at 6:21 PM, Ibon Salbidegoitia <
>>>>>>>> ibon.salbi at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Hi Sami,
>>>>>>>>>
>>>>>>>>> Thank you. Yes I knew that because I saw it in the JS code you
>>>>>>>>> mention.
>>>>>>>>> I was going to change the ortophoto and texture to workspace to
>>>>>>>>> "fiware" for that reason, but being honest I didn't test it because I found
>>>>>>>>> the error I described in my previous email. I mean, I was trying to access
>>>>>>>>> the texture layer W3DS tab to make it "Active" and "Queryable" as required
>>>>>>>>> on the wiki, so that's the reason I sent you the error, because I though
>>>>>>>>> that it wouldn't be possible to go ahead without changing the texture the
>>>>>>>>> configuration.
>>>>>>>>>
>>>>>>>>> So, if I am wrong and it is not necessary to configure the W3DS
>>>>>>>>> tab, I will try it. I don't need from you to change the JS code to find
>>>>>>>>> texture and photos of all the workspace. I will change the data to "fiware"
>>>>>>>>> workspae.
>>>>>>>>>
>>>>>>>>> I will tell you if everything goes well.
>>>>>>>>> Best regards,
>>>>>>>>>
>>>>>>>>> Ibon
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> 2015-06-22 9:05 GMT+02:00 Sami J <sami.jylkka at cyberlightning.com>:
>>>>>>>>>
>>>>>>>>>> Hi Ibon,
>>>>>>>>>> nice to hear you have been able to progress in your work!
>>>>>>>>>>
>>>>>>>>>> Let me answer behalf Juha: Your texture data seems to be ok. In
>>>>>>>>>> case you are using GIS GE reference client problem with the texture loading
>>>>>>>>>> might be with the used workspace. GIS GE reference client assumes that all
>>>>>>>>>> data is in "fiware"-workspace. This applies also for the textures. So
>>>>>>>>>> changing texture workspace to "fiware" might solve loading problem.
>>>>>>>>>>
>>>>>>>>>> If you'd like to modify reference client to support also other
>>>>>>>>>> workspaces, URI for texture loading is defined in the scenemngr.js
>>>>>>>>>> getElements-function. You can modify URL created in there.
>>>>>>>>>>
>>>>>>>>>> Best regards,
>>>>>>>>>> Sami
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Mon, Jun 22, 2015 at 9:05 AM, Juha Hyvärinen <
>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote:
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> ---------- Forwarded message ----------
>>>>>>>>>>> From: Ibon Salbidegoitia <ibon.salbi at gmail.com>
>>>>>>>>>>> Date: Thu, Jun 18, 2015 at 11:05 AM
>>>>>>>>>>> Subject: Re: W3DS - FIWARE
>>>>>>>>>>> To: Juha Hyvärinen <juha.hyvarinen at cyberlightning.com>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>
>>>>>>>>>>> I checked that many changes where done on the data and wiki.
>>>>>>>>>>> Congratulations! Now everything is very clear!
>>>>>>>>>>>
>>>>>>>>>>> I write you because I have some doubts about the texture data.
>>>>>>>>>>> On the wiki "User and Programmers Guide" section "3.3.3 Adding texture" the
>>>>>>>>>>> last sentence says that one option is to store texture on a GeoTIFF.
>>>>>>>>>>> I used the following GeoTIFF texture (MDT) data on float32
>>>>>>>>>>> format to try it. You can download it here:
>>>>>>>>>>> ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT_LIDAR_2013_25m_ETRS89.zip
>>>>>>>>>>>
>>>>>>>>>>> The file has been uploaded to Geoserver. As it does not
>>>>>>>>>>> recognize the SRS, I defined whichis the EPSG:25830.
>>>>>>>>>>> As it says in the Unit Testing Plan, I have to go to W3DS tab to
>>>>>>>>>>> activate and make it queryable.
>>>>>>>>>>> However, it returns an error on JIRA.
>>>>>>>>>>>
>>>>>>>>>>> You can check it in our geoserver:
>>>>>>>>>>> http://151.80.143.120:8080/geoserver/
>>>>>>>>>>> + User: admin
>>>>>>>>>>> + Pass: geoserver
>>>>>>>>>>>
>>>>>>>>>>> The GeoTIFF texture is defined on the layer "terrain" , on
>>>>>>>>>>> workspace "ODE"
>>>>>>>>>>> Please let me know why this option is not available.
>>>>>>>>>>> Best regards,
>>>>>>>>>>>
>>>>>>>>>>> Ibon
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> 2015-06-02 18:20 GMT+02:00 Ibon Salbidegoitia <
>>>>>>>>>>> ibon.salbi at gmail.com>:
>>>>>>>>>>>
>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>
>>>>>>>>>>>> I have been able to run GIS Client examples:
>>>>>>>>>>>> +
>>>>>>>>>>>> http://151.80.143.120/GIS_4.3.2/GIS_Client_octet-stream/index.xhtml
>>>>>>>>>>>> +
>>>>>>>>>>>> http://151.80.143.120/GIS_4.3.2/GIS_Client_xml3d/index.xhtml
>>>>>>>>>>>>
>>>>>>>>>>>> As you can see in the attached pictures, there seems to be some
>>>>>>>>>>>> problems with space between layers and I cannot see the xml3d buildings on
>>>>>>>>>>>> the examples.
>>>>>>>>>>>> Do you know where the buildings should appear?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Just as comment, I have found more bugs that may improve the
>>>>>>>>>>>> Unit Testing Plan. I list all of them below if you are interested on
>>>>>>>>>>>> changing them
>>>>>>>>>>>>
>>>>>>>>>>>> *On wiki*:
>>>>>>>>>>>> 1.2.2.4 PostGIS connection to GeoServer
>>>>>>>>>>>> + When Publish fiware_test_terrain PostGIS - PostGIS Database
>>>>>>>>>>>> In "Objects Attributes" section select "name" for the
>>>>>>>>>>>> "Object ID" it is not possible because only options are [elevation / geom /
>>>>>>>>>>>> lod]. The documentation seems to need to select "name" when it does not
>>>>>>>>>>>> exist.
>>>>>>>>>>>>
>>>>>>>>>>>> 1.2.3.2 terrain_texture_orto.tif and terrain_texture_raster.tif
>>>>>>>>>>>>
>>>>>>>>>>>> + Raster_map_image_for_terrain_texture/terrain_texture_raster.tif
>>>>>>>>>>>> SRS is automatically set to EPSG:404000. Not EPSG:3067 as
>>>>>>>>>>>> it is said on the wiki
>>>>>>>>>>>> + Aero_photo_for_terrain_texture/terrain_texture_orto.tif
>>>>>>>>>>>> SRS is automatically set to EPSG:3067. Not EPSG:404000 as
>>>>>>>>>>>> it is said on the wiki
>>>>>>>>>>>>
>>>>>>>>>>>> *On GIS Client*:
>>>>>>>>>>>> Version 4.3.2
>>>>>>>>>>>> + The both examples () have changed the script "map.js" and
>>>>>>>>>>>> now it is not automatically defined "baseUrl" variable as previous version
>>>>>>>>>>>> 4.2.2. It will be recommended to use the code lines:
>>>>>>>>>>>> var ip = location.host;
>>>>>>>>>>>> var baseUrl = "http://"+ip+"/geoserver/";
>>>>>>>>>>>>
>>>>>>>>>>>> *On MIWI-GISDataProvider download section*:
>>>>>>>>>>>> + Version 4.3.2
>>>>>>>>>>>> - Test assest 4.3.2 ZIP file has a space between text
>>>>>>>>>>>> and version numbers ->
>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip
>>>>>>>>>>>> - ZIP file when decompressed has a folder with a space
>>>>>>>>>>>> between text ("rel") and numbers ("4.3.2") -> rel\ 4.3.2
>>>>>>>>>>>> - Subfolders of Test_assest "Building_coordinates /" and
>>>>>>>>>>>> "PostGIS_database_backup /" have a space at the end of the name.
>>>>>>>>>>>> + Version 4.2.2
>>>>>>>>>>>> - Subfolders of Test_assest "Building_coordinates /" and
>>>>>>>>>>>> "PostGIS_database_backup /" have a space at the end of the name.
>>>>>>>>>>>>
>>>>>>>>>>>> Best regards,
>>>>>>>>>>>>
>>>>>>>>>>>> Ibon
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> 2015-06-02 11:59 GMT+00:00 Juha Hyvärinen <
>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thank you for feedback about test asset naming problems, I
>>>>>>>>>>>>> wasn't aware of those and I have informed my colleague who have made those
>>>>>>>>>>>>> packages. He will fix those tomorrow.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Building coordinates are needed if you want to use external 3D
>>>>>>>>>>>>> models in your application with real spatial information. For example hand
>>>>>>>>>>>>> made building models placed in correct position etc. If you don't need
>>>>>>>>>>>>> those then that step is optional.
>>>>>>>>>>>>>
>>>>>>>>>>>>> We also updated guide for database restoring and it can be
>>>>>>>>>>>>> found from here:
>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan#Import_PostGIS_database_backup_with_terrain_data
>>>>>>>>>>>>>
>>>>>>>>>>>>> Your problem was that username in the database backup was
>>>>>>>>>>>>> defined to be 'sami' and it does not exist in your system. It is fixed by
>>>>>>>>>>>>> ignoring username from the database backup.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Before restoring that database backup you should drop
>>>>>>>>>>>>> fiware_test_terrain table.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Let me know if this was helpful.
>>>>>>>>>>>>>
>>>>>>>>>>>>> - Juha
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Tue, Jun 2, 2015 at 11:41 AM, Ibon Salbidegoitia <
>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Sorry I send previous email without finishing the email as
>>>>>>>>>>>>>> error. You have below all the email.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Sorry for the delay, I was busy and these last 3 days I had
>>>>>>>>>>>>>> some problems with tomcat so I decided to format everything and start from
>>>>>>>>>>>>>> the beginning to know what errors are happening.
>>>>>>>>>>>>>> I will try to explain cronologically all the steps and
>>>>>>>>>>>>>> error/bugs found.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> First of all I update git repository and change to the
>>>>>>>>>>>>>> "fiware_rel_4.x" branch to create the WAR file with the maven command: mvn
>>>>>>>>>>>>>> install -DdownloadSources=true -DskipTests=true -Pw3ds
>>>>>>>>>>>>>> After restarting tomcat, the geoserver seems to work ->
>>>>>>>>>>>>>> http://151.80.143.120:8080/geoserver (User: admin /
>>>>>>>>>>>>>> Pass: geoserver)
>>>>>>>>>>>>>> I did not use the WAR published, I created my own from the
>>>>>>>>>>>>>> new github branch as you see.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> So then I decided to update the test unit plan. Here I have
>>>>>>>>>>>>>> one comment just to improve in case you want. I have checked that you
>>>>>>>>>>>>>> usually use "space" on folders and files which usually is no suitable. I
>>>>>>>>>>>>>> refer specificly to the 4.3.2 version.
>>>>>>>>>>>>>> + The ZIP file has a "space" on the name what requires to
>>>>>>>>>>>>>> use ASCI character to download: wget --no-check-certificate
>>>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip
>>>>>>>>>>>>>> + When ZIP is decompressed, the name of the folder has
>>>>>>>>>>>>>> also a "space": /home/UnitTestPlan/rel\ 4.3.2
>>>>>>>>>>>>>> + PostGIS database backup has also a "space" at the
>>>>>>>>>>>>>> end: /home/UnitTestPlan/rel\ 4.3.2/PostGIS_database_backup\ /
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Any way, I continue with the database restore. On the PostGIS
>>>>>>>>>>>>>> database backup, I checked on the 4.3.2 version that there are 2
>>>>>>>>>>>>>> files: building_coordinates and test_asset-terrain.
>>>>>>>>>>>>>> The "building_coordinates" file appears to be a text format
>>>>>>>>>>>>>> dump. So is this file necessary to upload to database?
>>>>>>>>>>>>>> The "test_asset-terrain" could be uploaded to postgres with
>>>>>>>>>>>>>> the following command: pg_restore -d fiware_test /home/UnitTestPlan/rel\
>>>>>>>>>>>>>> 4.3.2/PostGIS_database_backup\ /FIWARE-postgis-test_asset-terrain
>>>>>>>>>>>>>> However, I receive the following errors:
>>>>>>>>>>>>>> =================================================
>>>>>>>>>>>>>> pg_restore: [archiver (db)] Error while PROCESSING TOC:
>>>>>>>>>>>>>> pg_restore: [archiver (db)] Error from TOC entry 184; 1259
>>>>>>>>>>>>>> 65659 TABLE fiware_test_terrain sami
>>>>>>>>>>>>>> pg_restore: [archiver (db)] could not execute query: ERROR:
>>>>>>>>>>>>>> role "sami" does not exist
>>>>>>>>>>>>>> Command was: ALTER TABLE public.fiware_test_terrain OWNER TO
>>>>>>>>>>>>>> sami;
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> pg_restore: [archiver (db)] Error from TOC entry 183; 1259
>>>>>>>>>>>>>> 65657 SEQUENCE fiware_test_terrain_id_seq sami
>>>>>>>>>>>>>> pg_restore: [archiver (db)] could not execute query: ERROR:
>>>>>>>>>>>>>> role "sami" does not exist
>>>>>>>>>>>>>> Command was: ALTER TABLE public.fiware_test_terrain_id_seq
>>>>>>>>>>>>>> OWNER TO sami;
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> WARNING: errors ignored on restore: 2
>>>>>>>>>>>>>> =================================================
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I checked the information stored from backup on the database
>>>>>>>>>>>>>> and found the following tables, which I am not sure if they are all or
>>>>>>>>>>>>>> there are some missing.
>>>>>>>>>>>>>> =================================================
>>>>>>>>>>>>>> List of relations
>>>>>>>>>>>>>> Schema | Name | Type | Owner
>>>>>>>>>>>>>> --------+----------------------------+----------+----------
>>>>>>>>>>>>>> public | fiware_test_terrain | table | postgres
>>>>>>>>>>>>>> public | fiware_test_terrain_id_seq | sequence | postgres
>>>>>>>>>>>>>> public | geography_columns | view | postgres
>>>>>>>>>>>>>> public | geometry_columns | view | postgres
>>>>>>>>>>>>>> public | raster_columns | view | postgres
>>>>>>>>>>>>>> public | raster_overviews | view | postgres
>>>>>>>>>>>>>> public | spatial_ref_sys | table | postgres
>>>>>>>>>>>>>> =================================================
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I did not continue because it seems that there are some
>>>>>>>>>>>>>> errors that I should first understand and fix before continuing.
>>>>>>>>>>>>>> If you need something else from my side, please let me know.
>>>>>>>>>>>>>> And please, let me know if I have done something wrong.
>>>>>>>>>>>>>> Thank you. Best regards,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> 2015-06-02 8:33 GMT+00:00 Ibon Salbidegoitia <
>>>>>>>>>>>>>> ibon.salbi at gmail.com>:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Sorry for the delay, I was busy and these last 3 days I had
>>>>>>>>>>>>>>> some problems with tomcat so I decided to format everything and start from
>>>>>>>>>>>>>>> the beginning to know what errors are happening.
>>>>>>>>>>>>>>> I will try to explain cronologically all the steps and
>>>>>>>>>>>>>>> error/bugs found.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> First of all I update git repository and change to the
>>>>>>>>>>>>>>> "fiware_rel_4.x" branch to create the WAR file with the maven command: mvn
>>>>>>>>>>>>>>> install -DdownloadSources=true -DskipTests=true -Pw3ds
>>>>>>>>>>>>>>> After restarting tomcat, the geoserver seems to work ->
>>>>>>>>>>>>>>> http://151.80.143.120:8080/geoserver (User: admin /
>>>>>>>>>>>>>>> Pass: geoserver)
>>>>>>>>>>>>>>> I did not use the WAR published, I created my own from the
>>>>>>>>>>>>>>> new github branch as you see.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> So then I decided to update the test unit plan. Here I have
>>>>>>>>>>>>>>> one comment just to improve in case you want. I have checked that you
>>>>>>>>>>>>>>> usually use "space" on folders and files which usually is no suitable. I
>>>>>>>>>>>>>>> refer specificly to the 4.3.2 version.
>>>>>>>>>>>>>>> + The ZIP file has a "space" on the name what requires to
>>>>>>>>>>>>>>> use ASCI character to download: wget --no-check-certificate
>>>>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1645/Test_asset_%204.3.2.zip
>>>>>>>>>>>>>>> + When ZIP is decompressed, the name of the folder has
>>>>>>>>>>>>>>> also a "space": /home/UnitTestPlan/rel\ 4.3.2
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 2015-05-26 12:49 GMT+00:00 Juha Hyvärinen <
>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> That problem should now be fixed, code is in the github (
>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver/tree/fiware_rel_4.x)
>>>>>>>>>>>>>>>> and we have also published new war file in Fiware FusionForge (
>>>>>>>>>>>>>>>> https://forge.fiware.org/frs/download.php/1643/geoserver.war
>>>>>>>>>>>>>>>> ).
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> We also updated test assets and reference client. Updated
>>>>>>>>>>>>>>>> reference client is already available from the Github and test assets will
>>>>>>>>>>>>>>>> be published later today or tomorrow morning to FusionForge under release
>>>>>>>>>>>>>>>> 4.3.2 (https://forge.fiware.org/frs/?group_id=7).
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I hope that this release will fix problems you encountered
>>>>>>>>>>>>>>>> earlier. Please report back did this solve those problems. Thank you for
>>>>>>>>>>>>>>>> submitting these bug reports.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> - Juha
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Tue, May 26, 2015 at 9:33 AM, Juha Hyvärinen <
>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> We have looked into that problem now for couple of days
>>>>>>>>>>>>>>>>> and it seems to be somehow related to Tomcat and system locale settings. We
>>>>>>>>>>>>>>>>> can reproduce same problem when we deploy to a Tomcat instance while with
>>>>>>>>>>>>>>>>> Jetty everything works just fine.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I'm working with the fix now, but there is also a
>>>>>>>>>>>>>>>>> workaround: deploy war package to a Jetty instance.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I will notify you once I have pushed code changes to git.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> - Juha
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Fri, May 22, 2015 at 1:08 PM, Juha Hyvärinen <
>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> I also forgot to mention that you should move to newer
>>>>>>>>>>>>>>>>>> test client which we will release officially during summer, but code is
>>>>>>>>>>>>>>>>>> already available from the Github:
>>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/Cyber-WeX
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Client code can be found from here:
>>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/Cyber-WeX/tree/master/GIS/GIS_Client_xml3d
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> - Juha
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Fri, May 22, 2015 at 12:30 PM, Juha Hyvärinen <
>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> I have to admit that I'm clueless with that terrain
>>>>>>>>>>>>>>>>>>> problem, since I couldn't replicate it. Everything seems to be right at the
>>>>>>>>>>>>>>>>>>> server side but still data is somehow corrupted when it arrives to the
>>>>>>>>>>>>>>>>>>> client. We have deployed that same data set without any problems to more
>>>>>>>>>>>>>>>>>>> than 20 different systems by many different users during our internal
>>>>>>>>>>>>>>>>>>> development and testing.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> There are still few points which you could try.
>>>>>>>>>>>>>>>>>>> 1. Install newer PostGIS version for example from Ubuntu
>>>>>>>>>>>>>>>>>>> repositories instead of manually build one.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> 2. Try our upcoming release of Geoserver from Github.
>>>>>>>>>>>>>>>>>>> This shouldn't be difficult, since you already build your own version.
>>>>>>>>>>>>>>>>>>> If you used git to clone code earlier, you only need to
>>>>>>>>>>>>>>>>>>> pull new changes from the repository and change code branch from fiware to
>>>>>>>>>>>>>>>>>>> fiware_rel_4.x (git pull && git checkout fiware_rel_4.x) and rebuild
>>>>>>>>>>>>>>>>>>> project.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Also I created database dump from building coordinates
>>>>>>>>>>>>>>>>>>> table and it's as an attachment. We will add it also to the assets and
>>>>>>>>>>>>>>>>>>> update documentation once we have little spare time to do it. Table can be
>>>>>>>>>>>>>>>>>>> restored with command: sudo -u postgres psql databasename <
>>>>>>>>>>>>>>>>>>> path/to/the/file.sql
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Before restoring that dumb, change URLs in it to point a
>>>>>>>>>>>>>>>>>>> place where you actually have that xml file. At the moment URL is
>>>>>>>>>>>>>>>>>>> http://localhost/Test_asset/Building_model/building.xml
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> - Juha
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Thu, May 21, 2015 at 1:09 PM, Ibon Salbidegoitia <
>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> You are right, I forgot to edit the tomcat7 default
>>>>>>>>>>>>>>>>>>>> start-up configuration file.
>>>>>>>>>>>>>>>>>>>> Now is using openJDK.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> 2015-05-21 9:36 GMT+00:00 Juha Hyvärinen <
>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Could you restart tomcat again since it still uses
>>>>>>>>>>>>>>>>>>>>> Oracle java 1.8.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> - Juha
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On Thu, May 21, 2015 at 10:57 AM, Ibon Salbidegoitia <
>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> I checked that tomcat was down due to low xmx size. I
>>>>>>>>>>>>>>>>>>>>>> restarted and modify xmx to avoid errors.
>>>>>>>>>>>>>>>>>>>>>> Asnwering to your comments:
>>>>>>>>>>>>>>>>>>>>>> + Please let me know when you update the
>>>>>>>>>>>>>>>>>>>>>> documentation to check importin building coordinates
>>>>>>>>>>>>>>>>>>>>>> + I imported with following command of postgres:
>>>>>>>>>>>>>>>>>>>>>> $ su - postgres
>>>>>>>>>>>>>>>>>>>>>> $ createdb fiware_test
>>>>>>>>>>>>>>>>>>>>>> $ pg_restore -d fiware_test
>>>>>>>>>>>>>>>>>>>>>> ./Test_asset_3.3/PostGIS_database_backup\ /FIWARE-postgis-test_asset
>>>>>>>>>>>>>>>>>>>>>> Because I am using remote server I cannot use
>>>>>>>>>>>>>>>>>>>>>> pgadmin, but the import was correct without errors and I checked that the
>>>>>>>>>>>>>>>>>>>>>> data was correct.
>>>>>>>>>>>>>>>>>>>>>> + I am using Oracle java (1.8.0_31), so I will
>>>>>>>>>>>>>>>>>>>>>> change it to openJDK7 as you recommend. Now is changed to openJDK7 to
>>>>>>>>>>>>>>>>>>>>>> version 1.7.0_79
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> As I said, the Geoserver is active, so you can check
>>>>>>>>>>>>>>>>>>>>>> on it whatever you want.
>>>>>>>>>>>>>>>>>>>>>> Kind regards,
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> 2015-05-21 6:56 GMT+00:00 Juha Hyvärinen <
>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> I was looking into those errors you reported but
>>>>>>>>>>>>>>>>>>>>>>> your server went down before I could figure out any final solution. Here
>>>>>>>>>>>>>>>>>>>>>>> are my thoughts so far.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> I noticed that something have went wrong at least
>>>>>>>>>>>>>>>>>>>>>>> with building coordinate importing and we will update documentation how to
>>>>>>>>>>>>>>>>>>>>>>> import those properly. I can notice you once that is done.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> I also would like to make sure that
>>>>>>>>>>>>>>>>>>>>>>> fiware:fiware_test_terrain is data set provided by us and you imported it
>>>>>>>>>>>>>>>>>>>>>>> to the database as instructed with pgAdmin?
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Third point: in the past I had some problems with
>>>>>>>>>>>>>>>>>>>>>>> Geoserver when we used Oracle java, so please make sure that you use
>>>>>>>>>>>>>>>>>>>>>>> openJDK7. You can check used Java version with commad:
>>>>>>>>>>>>>>>>>>>>>>> java -version
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> result should be something similar:
>>>>>>>>>>>>>>>>>>>>>>> -----------------
>>>>>>>>>>>>>>>>>>>>>>> :~$ java -version
>>>>>>>>>>>>>>>>>>>>>>> java version "1.7.0_79"
>>>>>>>>>>>>>>>>>>>>>>> OpenJDK Runtime Environment (IcedTea 2.5.5)
>>>>>>>>>>>>>>>>>>>>>>> (7u79-2.5.5-0ubuntu0.14.04.2)
>>>>>>>>>>>>>>>>>>>>>>> OpenJDK 64-Bit Server VM (build 24.79-b02, mixed
>>>>>>>>>>>>>>>>>>>>>>> mode)
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> If not, change default java version with command:
>>>>>>>>>>>>>>>>>>>>>>> sudo update-alternatives --config java
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> - Juha
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> On Mon, May 18, 2015 at 10:34 AM, Ibon Salbidegoitia
>>>>>>>>>>>>>>>>>>>>>>> <ibon.salbi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> The last couple of months I have been learning and
>>>>>>>>>>>>>>>>>>>>>>>> understanding all the things that we discussed 2 months ago.
>>>>>>>>>>>>>>>>>>>>>>>> Once I knew how to do most of the things, I tried
>>>>>>>>>>>>>>>>>>>>>>>> to do the "Unit Testing Plan" from the Wiki (
>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan
>>>>>>>>>>>>>>>>>>>>>>>> )
>>>>>>>>>>>>>>>>>>>>>>>> I have found some bugs/errors that I think they
>>>>>>>>>>>>>>>>>>>>>>>> should be corrected if possible:
>>>>>>>>>>>>>>>>>>>>>>>> + Section: 1.2.2.3 PostGIS connection to GeoServer
>>>>>>>>>>>>>>>>>>>>>>>> + terrain_texture_raste has a EPSG:404000 SRS (set
>>>>>>>>>>>>>>>>>>>>>>>> by default)
>>>>>>>>>>>>>>>>>>>>>>>> + terrain_texture_orto has a EPSG:3067 SRS (set by
>>>>>>>>>>>>>>>>>>>>>>>> default)
>>>>>>>>>>>>>>>>>>>>>>>> + Section: 1.2.3.2 terrain_texture_orto.tif and
>>>>>>>>>>>>>>>>>>>>>>>> terrain_texture_raster.tif
>>>>>>>>>>>>>>>>>>>>>>>> + On building_coordinates SRS is not automatically
>>>>>>>>>>>>>>>>>>>>>>>> assigned
>>>>>>>>>>>>>>>>>>>>>>>> + On building_coordinates table, when SRS EPSG:3047
>>>>>>>>>>>>>>>>>>>>>>>> value is introduced manually, the "Bounding Box" values seem to be wrong
>>>>>>>>>>>>>>>>>>>>>>>> assigned
>>>>>>>>>>>>>>>>>>>>>>>> + Select Activate and Queryable in the W3DS
>>>>>>>>>>>>>>>>>>>>>>>> Settings, it is not clear if it is for both tables
>>>>>>>>>>>>>>>>>>>>>>>> + In Objects Attributes select name for the Object
>>>>>>>>>>>>>>>>>>>>>>>> ID. Only for building_coordinates table, because fiware_test_terrain table
>>>>>>>>>>>>>>>>>>>>>>>> has not got this Object ID.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> I have follow everything sucessfully but at the
>>>>>>>>>>>>>>>>>>>>>>>> end, it is not possible to see the correct result (
>>>>>>>>>>>>>>>>>>>>>>>> http://151.80.143.120/GIS/). I am not sure if it
>>>>>>>>>>>>>>>>>>>>>>>> is for the "building_coordinates" bounding box values or what.
>>>>>>>>>>>>>>>>>>>>>>>> You can check on Geoserver that everything is
>>>>>>>>>>>>>>>>>>>>>>>> correct (http://151.80.143.120/geoserver User:
>>>>>>>>>>>>>>>>>>>>>>>> admin Pass: geoserver. The server is a server to test this W3DS service
>>>>>>>>>>>>>>>>>>>>>>>> only, so you can use it without any problems)
>>>>>>>>>>>>>>>>>>>>>>>> So something seems that it is not correctly
>>>>>>>>>>>>>>>>>>>>>>>> working. What can it be? (All the data was correctly imported to PostGIS
>>>>>>>>>>>>>>>>>>>>>>>> without errors)
>>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Best regards,
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-26 7:42 GMT+00:00 Juha Hyvärinen <
>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> I have been out of office and didn't have time to
>>>>>>>>>>>>>>>>>>>>>>>>> reply earlier.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> EPSG:900913 is map projection defined by Google
>>>>>>>>>>>>>>>>>>>>>>>>> and it's using lat/lon coordinates. At the moment requesting data from
>>>>>>>>>>>>>>>>>>>>>>>>> non-metric coordinate systems will result erroneous output. Some projection
>>>>>>>>>>>>>>>>>>>>>>>>> tools may use that as a default projection if it's undefined. I suggest
>>>>>>>>>>>>>>>>>>>>>>>>> that you check your projection definitions from importing code and if you
>>>>>>>>>>>>>>>>>>>>>>>>> didn't set any coordinate system set one.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> I also quickly checked that one tile you provided
>>>>>>>>>>>>>>>>>>>>>>>>> and there was a lot no-data values. You could probably get better results
>>>>>>>>>>>>>>>>>>>>>>>>> if you select input data from area where there are actually data to show.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Please note that only UTM coordinate systems (or
>>>>>>>>>>>>>>>>>>>>>>>>> similar) are supported by W3DS module.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> For visualization you can use sample client
>>>>>>>>>>>>>>>>>>>>>>>>> provided within FIWARE project. It is quite simple and you shouldn't have
>>>>>>>>>>>>>>>>>>>>>>>>> any problems to understand how it does requests to the server and visualize
>>>>>>>>>>>>>>>>>>>>>>>>> received 3D data.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> - Juha
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Mar 18, 2015 at 10:11 AM, Ibon
>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia <ibon.salbi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> I have been searching and found that my data is
>>>>>>>>>>>>>>>>>>>>>>>>>> in EPSG:900913 and now the layer is published and I can see it.
>>>>>>>>>>>>>>>>>>>>>>>>>> Is this the correct way to publish it?
>>>>>>>>>>>>>>>>>>>>>>>>>> So now, I am supposed to use the 3D capabilities
>>>>>>>>>>>>>>>>>>>>>>>>>> to visualize in 3D. I have checked the XML3D link that you sent me but I
>>>>>>>>>>>>>>>>>>>>>>>>>> don't understand how I have to apply to visualize the layer in 3D.
>>>>>>>>>>>>>>>>>>>>>>>>>> Can you please be more specific or give me some
>>>>>>>>>>>>>>>>>>>>>>>>>> help?
>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Kind regards,
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-18 7:13 GMT+00:00 Ibon Salbidegoitia <
>>>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com>:
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> I have been able to introduce the XYZ files
>>>>>>>>>>>>>>>>>>>>>>>>>>> (*.asc in my case) to the Postgre database with the PostGIS extension.
>>>>>>>>>>>>>>>>>>>>>>>>>>> I am able to see the layer from the Geoserver
>>>>>>>>>>>>>>>>>>>>>>>>>>> but I have some doubts about the data to be introduced that I don't know
>>>>>>>>>>>>>>>>>>>>>>>>>>> how to fill when Geoserver asks for publishing the layer.
>>>>>>>>>>>>>>>>>>>>>>>>>>> I have followed the following command lines to
>>>>>>>>>>>>>>>>>>>>>>>>>>> introduce the data to database which I will appreciate if you can tell me
>>>>>>>>>>>>>>>>>>>>>>>>>>> if they are correct. And also, I would like to know how can I publish the
>>>>>>>>>>>>>>>>>>>>>>>>>>> layer because the link that you send me doesn't give me enough information
>>>>>>>>>>>>>>>>>>>>>>>>>>> to be able for that.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> ==============================================================================================================
>>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Download the XYZ data as *.asc file =====
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ mkdir /root/data
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ cd /root/data
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ wget
>>>>>>>>>>>>>>>>>>>>>>>>>>> ftp://ftp.geo.euskadi.net/lidar/MDE_LIDAR_2013_ETRS89/MDT/H0037/mdt_037_1_8.zip
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ unzip mdt_037_1_8.zip
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ gdal_polygonize.py -f "ESRI Shapefile"
>>>>>>>>>>>>>>>>>>>>>>>>>>> mdt_037_1_8.asc mdt_037_1_8.shp
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Create database on Postgre as postgres
>>>>>>>>>>>>>>>>>>>>>>>>>>> user =====
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ su - postgres
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres -d postgres
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ create database [yourdatabase];
>>>>>>>>>>>>>>>>>>>>>>>>>>> -> CREATE DATABASE
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ \list
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ \q
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ psql -d [yourdatabase] -c "CREATE EXTENSION
>>>>>>>>>>>>>>>>>>>>>>>>>>> postgis;"
>>>>>>>>>>>>>>>>>>>>>>>>>>> -> CREATE EXTENSION
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ exit
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Define Postgre password =====
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ \password postgres
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ \q
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ exit
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Import data with "shp2pgsql" utility of
>>>>>>>>>>>>>>>>>>>>>>>>>>> postgis (
>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.bostongis.com/pgsql2shp_shp2pgsql_quickguide.bqg)
>>>>>>>>>>>>>>>>>>>>>>>>>>> =====
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ /root/postgis-2.1.0/loader/shp2pgsql
>>>>>>>>>>>>>>>>>>>>>>>>>>> /root/data/mdt_037_1_8.shp >sql
>>>>>>>>>>>>>>>>>>>>>>>>>>> -> Shapefile type: Polygon
>>>>>>>>>>>>>>>>>>>>>>>>>>> -> Postgis type: MULTIPOLYGON[2]
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Import created sql to postgre =====
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ mv sql /var/lib/postgresql/
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ chmod 777 /var/lib/postgresql/sql
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ su - postgres
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres -d [yourdatabase] -f sql
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ psql -U postgres -d [yourdatabase] -c "\d"
>>>>>>>>>>>>>>>>>>>>>>>>>>> -> List of relations
>>>>>>>>>>>>>>>>>>>>>>>>>>> -> Schema | Name | Type |
>>>>>>>>>>>>>>>>>>>>>>>>>>> Owner
>>>>>>>>>>>>>>>>>>>>>>>>>>> ->
>>>>>>>>>>>>>>>>>>>>>>>>>>> --------+---------------------+----------+----------
>>>>>>>>>>>>>>>>>>>>>>>>>>> -> public | geography_columns | view |
>>>>>>>>>>>>>>>>>>>>>>>>>>> postgres
>>>>>>>>>>>>>>>>>>>>>>>>>>> -> public | geometry_columns | view |
>>>>>>>>>>>>>>>>>>>>>>>>>>> postgres
>>>>>>>>>>>>>>>>>>>>>>>>>>> -> public | mdt_037_1_8 | table |
>>>>>>>>>>>>>>>>>>>>>>>>>>> postgres
>>>>>>>>>>>>>>>>>>>>>>>>>>> -> public | mdt_037_1_8_gid_seq | sequence |
>>>>>>>>>>>>>>>>>>>>>>>>>>> postgres
>>>>>>>>>>>>>>>>>>>>>>>>>>> -> ...
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> $ exit
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Add new workspace =====
>>>>>>>>>>>>>>>>>>>>>>>>>>> + Name: Fiware
>>>>>>>>>>>>>>>>>>>>>>>>>>> + URI of name space: com.fiware
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Add new "Data store" on Geoserver (
>>>>>>>>>>>>>>>>>>>>>>>>>>> http://151.80.143.120:8080/geoserver) =====
>>>>>>>>>>>>>>>>>>>>>>>>>>> + Select the "PostGIS - PostGIS Database"
>>>>>>>>>>>>>>>>>>>>>>>>>>> vectorial data
>>>>>>>>>>>>>>>>>>>>>>>>>>> + Add data required:
>>>>>>>>>>>>>>>>>>>>>>>>>>> + Workspace: Fiware
>>>>>>>>>>>>>>>>>>>>>>>>>>> + Name of origin data: Fiware_Test1
>>>>>>>>>>>>>>>>>>>>>>>>>>> + database: fiwaretest1
>>>>>>>>>>>>>>>>>>>>>>>>>>> + host: localhost
>>>>>>>>>>>>>>>>>>>>>>>>>>> + port: 5432
>>>>>>>>>>>>>>>>>>>>>>>>>>> + user: postgres
>>>>>>>>>>>>>>>>>>>>>>>>>>> + pass: postgres
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> ===== Add new layer and make public =====
>>>>>>>>>>>>>>>>>>>>>>>>>>> + Edit layer features?¿?
>>>>>>>>>>>>>>>>>>>>>>>>>>> + SRS?
>>>>>>>>>>>>>>>>>>>>>>>>>>> + ...
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> ==============================================================================================================
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards,
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-03 13:42 GMT+00:00 Juha Hyvärinen <
>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>:
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Yes, write all polygons to a single shp file or
>>>>>>>>>>>>>>>>>>>>>>>>>>>> to a single table inside a database and you are good to go.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> I would recommend that you also study some
>>>>>>>>>>>>>>>>>>>>>>>>>>>> basics about rendering engines and search general knowledge what data 3D
>>>>>>>>>>>>>>>>>>>>>>>>>>>> models really keeps inside them.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> In FIWARE we use XML3D as a rendering engine
>>>>>>>>>>>>>>>>>>>>>>>>>>>> and all 3D models produced by GeoServer are in XML3D format.
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Here is one guide how to use XML3D rendering
>>>>>>>>>>>>>>>>>>>>>>>>>>>> engine:
>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/xml3d/xml3d.js/wiki/The-Basics-of-XML3D
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Mar 3, 2015 at 2:53 PM, Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia <ibon.salbi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for your clarifications.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have some doubts about your comments.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I understand how do I have to create the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> polygons. I have done a python script with the for loops as you said
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (attached) which creates the POLIGONZs.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have done a SHP file for each polygon, but
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> should I do a single SHP with all the polygons? I suppose that I should do
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> a single SHP because I can have many polygons if the resolution is too
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> high. Or this is not possible?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The procedure of writting data to database
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with psycopg2 is similar, so the same
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> question, all polygons together is it possible?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kind regards,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-03 11:35 GMT+00:00 Juha Hyvärinen <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have just updated User and Programmers
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> guide. I hope that these tips helps you forward.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Added content:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Data generation from *.xyz file format
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Here is a small sample from source dataset:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Easting Northing Elevation
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ---------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398000.000 7542000.000 279.950
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7542000.000 279.388
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7542000.000 278.818
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398000.000 7541990.000 281.002
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541990.000 280.436
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7541990.000 279.847
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398000.000 7541980.000 282.096
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541980.000 281.539
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7541980.000 280.944
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> That data produces following 2D grid:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------|
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 | 398000.000 7542000.000 279.950 |
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7542000.000 279.388 | 398020.000 7542000.000 278.818 |
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------|
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 | 398000.000 7541990.000 281.002 |
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541990.000 280.436 | 398020.000 7541990.000 279.847 |
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------|
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 | 398000.000 7541980.000 282.096 |
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541980.000 281.539 | 398020.000 7541980.000 280.944 |
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> |-------------------------------------------------|---------------------------------------------------|-------------------------------------------------|
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> From that grid we can create polygons
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> representing terrain surface.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> WKT polygons generated from that dataset
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> should look like this:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398000.000 7542000.000 279.950,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7542000.000 279.388, 398010.000 7541990.000 280.436, 398000.000
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541990.000 281.002, 398000.000 7542000.000 279.950))
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398010.000 7542000.000 279.388,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7542000.000 278.818, 398020.000 7541990.000 279.847, 398010.000
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541990.000 280.436, 398010.000 7542000.000 279.388))
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398000.000 7541990.000 281.002,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398010.000 7541990.000 280.436, 398010.000 7541980.000 281.539, 398000.000
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541980.000 282.096, 398000.000 7541990.000 281.002))
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGONZ((398010.000 7541990.000 280.436,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 398020.000 7541990.000 279.847, 398020.000 7541980.000 280.944, 398010.000
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 7541980.000 281.539, 398010.000 7541990.000 280.436))
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> NOTE: It is said in WKT specification that
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> polygons needs to be closed, meaning that start and end points are the same.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Each polygon should be written into a PostGIS
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> database or into a shape file.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Shapefile writing can be done for example
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with python library called pyshp (
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/GeospatialPython/pyshp).
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - PostGIS can be used for example with
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> psycopg2 library (http://initd.org/psycopg/).
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Depending on selected storage format choose
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> corresponding publishing steps for data publishing into a W3DS layer with
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> GeoServer.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Official GeoServer guide how to publish a
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> shapefile:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/stable/en/user/gettingstarted/shapefile-quickstart/index.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Official GeoServer guide how to publish a
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PostGIS table:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/stable/en/user/gettingstarted/postgis-quickstart/index.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Adding texture
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Raster data (f.ex. ortophotos) is used as
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> terrain texture and guide how to work with rasters can be found from here:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/stable/en/user/data/raster/index.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Mar 2, 2015 at 6:23 PM, Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia <ibon.salbi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for the steps. However, I would
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> like to clarify some things to have clear what I should do.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Imagine I have the data:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> lat lon alt
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 0 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 1 5
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 2 10
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 0 5
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 1 10
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 2 15
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 0 10
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 1 15
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2 2 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This is like a flat surface. So I have to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> create a 2D array like:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 10 15 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 5 10 15
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0 5 10
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have never create wkt polygons in 3D, but
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> as I have seen in some websites, this could be done like this?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> POLYGON ((0 0 0, 0 1 5, 1 1 10, 1 0 5), (0 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 5, 0 2 10, 1 1 10, 1 2 15), (1 0 5, 2 0 10, 1 1 10, 2 1 15), (1 1 10, 1 2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 15, 2 1 15, 2 2 20))
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> After this, I am not sure how to upload to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> DDBB in shp because I have many files. Also, I don't know how to associate
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the ortophoto to the shapes.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Being honest, I am a little bit lost and I
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> would appreciate if you can help me.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-03-02 7:38 GMT+00:00 Juha Hyvärinen <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm sorry to hear that you still have those
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> problems. I'm looking into that and I will report back to you if I'm able
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to reproduce and solve it in some environment.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> At the moment you can't use .tiff file
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> format.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Since XML3D, which we use as a rendering
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> engine, requires that rendered models consist of polygons we had to create
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> polygonal terrain from .asc point grid. In order to reduce processor loads
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> we decided that data should be stored as polygons. In that way data can be
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> returned to a client without any further processing.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> We have developed proprietary importing
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> tools to support our business cases and therefore I can't provide those
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> directly to you but I can describe what we did.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Our workflow from .asc files included three
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> steps:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1. Read asc file and create 2D array from
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> it where each cell is a point from asc file
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2. Inside a for loop select four points
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from array and create wkt polygon from those points
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 3. Write just created polygon to a database
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> or to a shp file
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> When polygons are stored in a database you
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> need to publish that table in GeoServer as a layer and configure it to use
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> W3DS module.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I hope that this clarifies needed steps
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from source data to a production use.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Juha
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Fri, Feb 27, 2015 at 8:04 PM, Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia <ibon.salbi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I continue trying to find my problem but I
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> haven't advance :(
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anyway, I don't write for that. I am
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> trying to upload xyz format data and some ortophotos to display them with
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> W3DS.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have the data in *.asc files and I have
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> a TIF file with all of them merged. As the documentation (
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> says that the *.shp, .dbf* and *.shx*
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> files are mandatory, I should convert all
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *.asc* to these formats? I cannot use*
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .tif*?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> As the documentation syas, I have to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> upload this files to the server and I suppose that the ortophotos also.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> However, I don't know how to display them afterwards.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Can you explain me? I am in a Fiware
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> European project and as you are the support of Fiware I hope you can help
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> me.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Best regards,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-24 11:58 GMT+00:00 Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <juha.hyvarinen at cyberlightning.com>:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have no glue why it's not loading since
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> personally I haven't ever used that module. You should read GeoServer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> startup logs and check if there are some fatal errors in service loading.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Logs should have something similar lines
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to these:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'wfs', enabled
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'wms', enabled
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'wcs', enabled
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 24 Feb 13:53:03 INFO [org.geoserver] -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Loaded service 'w3ds', enabled
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Check errors near those.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> There is also GeoServer users mail list
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and you probably could get more helpful response from there, since I'm not
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> expert in that area.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Feb 24, 2015 at 1:13 PM, Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia <ibon.salbi at gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for the comments.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> About the "Importer extension" I
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> downloaded the core extension for version 2.6.0 as you said because I show
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that was the version when I install it. So, can you guess the reason of the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> extension for not working. As you explained, W3DS is an isolated module, so
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> it has no sense for not working.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kind regards,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-24 11:08 GMT+00:00 Juha
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyvärinen <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Changes delivered to FIWARE are
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> isolated only to W3DS module and those are written on top of the GeoServer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> version 2.6.0. Therefore you need to use extensions written for that
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> specific version. We will move to next stable version 2.7 when it is
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> released later this spring. Currently 2.7 release is in RC1 state.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Our changes are also in the official
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> GeoServer master and 2.7 branches and you could actually try to build
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> either of those and see if build problem still exists. Meanwhile I try to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> replicate your problem in a virtual machine since everything worked well in
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> every physical machines I have access to.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, Feb 24, 2015 at 11:13 AM, Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia <ibon.salbi at gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I continue having a failure message in
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the same test.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have continued looking to the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> builded version (without tests as I said) and I was trying to use the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "Importer extension" installed by copying some source from this link:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/latest/en/user/extensions/importer/installing.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I copied the files to the folder
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ".../geoserver/src/web/app/target/geoserver/WEB-INF/lib" as it says and
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> restart Geoserver, but the extension does not seems to load. Could be due
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to the Geoserver version done for fiware? Or, how could I solve the problem?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-23 11:55 GMT+00:00 Juha
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyvärinen <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Only difference between our work
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chains that I was able to find is that I use also clean statement in mvn
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> build command. Could you try that? If it's still not working I try to find
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> some time to reproduce problem in a clean machine.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> mvn clean install
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -DdownloadSources=true -DskipTests=false -Pw3ds
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Resulting following summary:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Reactor Summary:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................................. SUCCESS [2.088s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Core Platform Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .................................. SUCCESS [9.062s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Open Web Service Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [5.411s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Main Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................... SUCCESS [1:58.712s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Security Modules
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................ SUCCESS [0.043s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer JDBC Security Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................ SUCCESS [18.349s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer LDAP Security Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................ SUCCESS [35.825s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................... SUCCESS [1.450s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service 1.0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Module ....................... SUCCESS [18.896s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service 1.1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Module ....................... SUCCESS [19.249s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Coverage Service 2.0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Module ....................... SUCCESS [46.273s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Feature Service Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................ SUCCESS [1:21.581s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web Map Service Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................ SUCCESS [1:27.636s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] KML support for GeoServer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................. SUCCESS [24.646s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoWebCache (GWC) Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .............................. SUCCESS [55.551s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] REST Support Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................... SUCCESS [10.524s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] REST Configuration Service
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Module ..................... SUCCESS [54.318s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Web Modules
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................. SUCCESS [0.028s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Core UI Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................ SUCCESS [46.005s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] WMS UI Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [17.764s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GWC UI Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [23.123s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] WFS UI Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [10.234s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Demoes Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [16.390s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] WCS UI Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......................................... SUCCESS [12.849s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI Modules
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ................................... SUCCESS [0.037s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI Core Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [1:14.168s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI JDBC Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [50.839s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Security UI LDAP Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................... SUCCESS [27.079s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] REST UI Module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................ SUCCESS [10.953s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Community Space
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....................................... SUCCESS [0.027s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Web 3D Service
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........................................ SUCCESS [4.663s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Web Application
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ............................. SUCCESS [3.207s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] GeoServer Extensions
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .................................. SUCCESS [0.083s]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] BUILD SUCCESSFUL
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Total time: 14 minutes 49
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> seconds
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Finished at: Mon Feb 23
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 13:26:42 EET 2015
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO] Final Memory: 187M/1400M
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [INFO]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Feb 23, 2015 at 12:33 PM,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon Salbidegoitia <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I followed the installation guide of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Fiware for installation.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I used a Ubuntu 14.04 Server 64 bits
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with 4 cores, 8GB RAM and 100GB of HD.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The version of JDK (openjdk-7-jdk)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> is 7u51-2.4.6-1ubuntu4, and postgis 2.1.0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The source that I downloaded is the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> one you shared from git (git clone -b fiware
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver.git
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> )
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I followed all the commands so
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that's the reason from asking. I would appreciate if you can tell me what
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> can be different.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you. Kind regards,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-20 13:03 GMT+00:00 Juha
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyvärinen <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com>:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> without knowledge about your build
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> system (used java version, used operating system etc.) and where you
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> downloaded sources I'm not able to help you with this problem. I just
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> tested version which we have delivered to FIWARE (
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/Cyberlightning/geoserver/tree/fiware)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and at least it build without any errors in any test cases.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Also, CatalogBuilder is bit out of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> my knowledge scope.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Fri, Feb 20, 2015 at 1:18 PM,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon Salbidegoitia <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Sorry, I forget to attach the log.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-20 11:17 GMT+00:00 Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com>:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have one comment about the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> installation. Previously when I installed the geoserver I didn't notice
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> because I was building without tests.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> But I was building geoserver with
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> test where I found a failure on:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> testSingleBandedCoverage(org.geoserver.catalog.impl.CatalogBuilderTest)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I attached the log of the output
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> for your information.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> How can I solve this problem?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Kind
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> regards,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-05 7:48 GMT+00:00 Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Salbidegoitia <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com>:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Juha,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for the reply.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have a xyz format data also so
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I will try to test what you sent me and look for the Unit Testing Plan link
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you sent.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If I have any doubt or problem I
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> will come back to you. Thank you.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kind regards,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015-02-05 7:27 GMT+01:00 Juha
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hyvärinen <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Ibon,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Data publishing is well
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> documented in GeoServer user manual:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://docs.geoserver.org/2.5.x/en/user/
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Data which we used in our
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> development was from National
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Land Survey of Finland. Source
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> data was in *-xyz*-format,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> which contains elevation data with spatial information. With this source
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> information it is possible to generate shapefile consisting polygon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> structure with elevation data. 2D presentation of the converted shapefile
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with elevation points is flat grid, in 3D presentation each grid points are
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> in same elevation level as in the real world. Therefore this grid with
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> elevation data can be used as source for terrain presentation.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You can also read user guide
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_User_and_Programmers_Guide
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You can find guide for setting
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> up test setup from here:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Unit_Testing_Plan
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Juha
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ---------- Forwarded message
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ----------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> From: Ibon Salbidegoitia <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ibon.salbi at gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Date: Wed, Feb 4, 2015 at 12:35
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> AM
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Subject: W3DS - FIWARE
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> To:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> miika.santala at cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Dear Miika,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I am Ibon from Spain.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I write to you because I am
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> involved in the FIWARE European project. This project promote a GIS data
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> provider with the W3DS for 3D visualization as the one you show on the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> following link:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://130.206.81.238:8080/gis_test_client/index.xhtml
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I contact you because a have
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> been in contact with Jorge Gustavo, who made a similar use of W3DS
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.sigte.udg.edu/jornadassiglibre2012/uploads/presentaciones_12/p43.pdf)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and he told me that W3DS is now supported by you.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have followed the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> instructions of FIWARE wiki (
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/GIS_Data_Provider_-_Installation_and_Administration_Guide)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to start using the service and everything seems to work perfectly with
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Jetty.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> However, I would like to know
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> how I have to store GIS data
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with 3D information straight to GeoServer. Is there any documentation of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> how to upload this kind of information? Can you share with me any
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> documentation about it?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you in advance. Yours
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sincerely,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ibon
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> material are confidential and may contain legally privileged information.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you are not the intended recipient, please contact the sender and delete
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the e-mail from your system without producing, distributing or retaining
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> copies thereof.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> material are confidential and may contain legally privileged information.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you are not the intended recipient, please contact the sender and delete
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the e-mail from your system without producing, distributing or retaining
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> copies thereof.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> are confidential and may contain legally privileged information. If you are
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not the intended recipient, please contact the sender and delete the e-mail
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> juha.hyvarinen at cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> are confidential and may contain legally privileged information. If you are
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not the intended recipient, please contact the sender and delete the e-mail
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are
>>>>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not
>>>>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail
>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies
>>>>>>>>>>>>>>>>>>>>>>>>>>>> thereof.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are
>>>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not
>>>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail
>>>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies
>>>>>>>>>>>>>>>>>>>>>>>>> thereof.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are
>>>>>>>>>>>>>>>>>>>>>>> confidential and may contain legally privileged information. If you are not
>>>>>>>>>>>>>>>>>>>>>>> the intended recipient, please contact the sender and delete the e-mail
>>>>>>>>>>>>>>>>>>>>>>> from your system without producing, distributing or retaining copies
>>>>>>>>>>>>>>>>>>>>>>> thereof.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are confidential
>>>>>>>>>>>>>>>>>>>>> and may contain legally privileged information. If you are not the intended
>>>>>>>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system
>>>>>>>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> This e-mail and all attached material are confidential
>>>>>>>>>>>>>>>>>>> and may contain legally privileged information. If you are not the intended
>>>>>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system
>>>>>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>> Juha Hyvärinen
>>>>>>>>>>>>>>>>>> Software Engineer
>>>>>>>>>>>>>>>>>> Cyberlightning Ltd.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> email. juha.hyvarinen at cyberlightning.com
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> See our new press release:
>>>>>>>>>>>>>>>>>> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> www.cyberlightning.com
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> This e-mail and all attached material are confidential
>>>>>>>>>>>>>>>>>> and may contain legally privileged information. If you are not the intended
>>>>>>>>>>>>>>>>>> recipient, please contact the sender and delete the e-mail from your system
>>>>>>>>>>>>>>>>>> without producing, distributing or retaining copies thereof.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> ...
>>>
>>> [Mensaje recortado]
>>
>>
>>
>
--
Juha Hyvärinen
Software Engineer
Cyberlightning Ltd.
email. juha.hyvarinen at cyberlightning.com
See our new press release:
http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/
www.cyberlightning.com
This e-mail and all attached material are confidential and may contain
legally privileged information. If you are not the intended recipient,
please contact the sender and delete the e-mail from your system without
producing, distributing or retaining copies thereof.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.fiware.org/private/fiware-finodex-coaching/attachments/20150727/7b920f8e/attachment.html>
You can get more information about our cookies and privacy policies clicking on the following links: Privacy policy Cookies policy