From rup.itm at cbs.dk Wed Mar 4 16:07:19 2015 From: rup.itm at cbs.dk (Rasmus Pedersen) Date: Wed, 4 Mar 2015 16:07:19 +0100 Subject: [Fiware-finodex-coaching] What is the Context Broker NGSI version? Message-ID: 9 or 10? Thanks, Finodex, Rasmus http://www.finodex-project.eu/ Design Science Track: http://tinyurl.com/lzqr6co -------------- next part -------------- An HTML attachment was scrubbed... URL: From krunoslav at yottabyte.hr Tue Mar 10 11:25:47 2015 From: krunoslav at yottabyte.hr (Krunoslav Hrnjak) Date: Tue, 10 Mar 2015 11:25:47 +0100 Subject: [Fiware-finodex-coaching] FiWareLab resources Message-ID: Dear Sirs, I have tried access FiWareLab and obtain only ONE floating IP address several times. Unfortunatly, I get: "message": "NoMoreFloatingIps: Zero floating ips available.", is it possible for Finodex participants to get some more resources in Lab, and also to get static IP address,so we coud be able to map DNS like digmap-lab.yottabyte.hr to assigned IP address (or somebody could map IP adress to digmap.cloud.lab.fiware.org). At the moment it is not possible to try out how lab works. Srda?no, Krunoslav -------------- next part -------------- An HTML attachment was scrubbed... URL: From depa at eng.it Wed Mar 4 17:11:13 2015 From: depa at eng.it (depa at eng.it) Date: Wed, 4 Mar 2015 16:11:13 +0000 Subject: [Fiware-finodex-coaching] R: What is the Context Broker NGSI version? In-Reply-To: References: Message-ID: <1161764176-1425485475-cardhu_decombobulator_blackberry.rim.net-872039166-@b16.c4.bise7.blackberry> Dear Rasmus, Context broker version is 19. It implement ngsi version 10 standard. Ciao Stefano Le mail ti raggiungono ovunque con BlackBerry? from Vodafone! -----Original Message----- From: Rasmus Pedersen Sender: fiware-finodex-coaching-bounces at lists.fi-ware.org Date: Wed, 4 Mar 2015 16:07:19 To: fiware-finodex-coaching at lists.fi-ware.org Cc: Rasmus Pedersen Subject: [Fiware-finodex-coaching] What is the Context Broker NGSI version? _______________________________________________ Fiware-finodex-coaching mailing list Fiware-finodex-coaching at lists.fi-ware.org https://lists.fi-ware.org/listinfo/fiware-finodex-coaching From rup.itm at cbs.dk Wed Mar 4 17:25:40 2015 From: rup.itm at cbs.dk (Rasmus Pedersen) Date: Wed, 4 Mar 2015 17:25:40 +0100 Subject: [Fiware-finodex-coaching] What is the Context Broker NGSI version? Message-ID: Thank you very much. Rasmus and the WP2 On Wed, Mar 4, 2015 at 8:11 AM -0800, "depa at eng.it" > wrote: Dear Rasmus, Context broker version is 19. It implement ngsi version 10 standard. Ciao Stefano Le mail ti raggiungono ovunque con BlackBerry? from Vodafone! -----Original Message----- From: Rasmus Pedersen Sender: fiware-finodex-coaching-bounces at lists.fi-ware.org Date: Wed, 4 Mar 2015 16:07:19 To: fiware-finodex-coaching at lists.fi-ware.org Cc: Rasmus Pedersen Subject: [Fiware-finodex-coaching] What is the Context Broker NGSI version? _______________________________________________ Fiware-finodex-coaching mailing list Fiware-finodex-coaching at lists.fi-ware.org https://lists.fi-ware.org/listinfo/fiware-finodex-coaching -------------- next part -------------- An HTML attachment was scrubbed... URL: From pvitale at eng.it Tue Mar 10 11:41:40 2015 From: pvitale at eng.it (Pasquale Vitale) Date: Tue, 10 Mar 2015 11:41:40 +0100 Subject: [Fiware-finodex-coaching] FiWareLab resources In-Reply-To: References: Message-ID: <54FECA64.8040401@eng.it> HiKrunoslav, try to use another region (for example choose the Berlin region on the left side of menu) Regards, Pasquale Il 10/03/2015 11:25, Krunoslav Hrnjak ha scritto: > Dear Sirs, > > I have tried access FiWareLab and obtain only ONE floating IP > address several times. Unfortunatly, I get: "message": > "NoMoreFloatingIps: Zero floating ips available.", is it possible for > Finodex participants to get some more resources in Lab, and also to > get static IP address,so we coud be able to map DNS like > digmap-lab.yottabyte.hr to assigned > IP address (or somebody could map IP adress to > digmap.cloud.lab.fiware.org ). > At the moment it is not possible to try out how lab works. > > Srda?no, Krunoslav > > > > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching -------------- next part -------------- An HTML attachment was scrubbed... URL: From krunoslav at yottabyte.hr Fri Mar 13 15:12:08 2015 From: krunoslav at yottabyte.hr (Krunoslav Hrnjak) Date: Fri, 13 Mar 2015 15:12:08 +0100 Subject: [Fiware-finodex-coaching] FiWareLab resources In-Reply-To: References: Message-ID: Dear sirs, I have changed region to Stockholm but unfortunately, now it is not possible to start new Instance. FiWare lab seems not usable. [image: Inline images 1] Srda?no Krunoslav Hrnjak, dipl. ing. el., univ. spec. oec., PMP, stalni sudski vje?tak za podru?je informatike, elektrotehnike i telekomunikacija Zagreba?ka 126, HR-10410 Velika Gorica Krunoslav at yottabyte.HR http://www.yottabyte.HR 095/517-4201 Molim razmislite o okoli?u prije ispisa On 10 March 2015 at 11:25, Krunoslav Hrnjak wrote: > Dear Sirs, > > I have tried access FiWareLab and obtain only ONE floating IP address > several times. Unfortunatly, I get: "message": "NoMoreFloatingIps: Zero > floating ips available.", is it possible for Finodex participants to get > some more resources in Lab, and also to get static IP address,so we coud be > able to map DNS like digmap-lab.yottabyte.hr to assigned IP address (or > somebody could map IP adress to digmap.cloud.lab.fiware.org). > At the moment it is not possible to try out how lab works. > > Srda?no, Krunoslav > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 117158 bytes Desc: not available URL: From imaqueda at sensowave.com Fri Mar 13 16:59:01 2015 From: imaqueda at sensowave.com (Ignacio Gomez Maqueda) Date: Fri, 13 Mar 2015 16:59:01 +0100 Subject: [Fiware-finodex-coaching] FiWareLab resources In-Reply-To: References: Message-ID: Dear sirs, Following with Krunoslav comments, we are also experiencing problems with fiware labs. We have a floating ip (in Zurich and in Spain2 region), but from time to time it stops to work and it starts to work again later and so on. Is there any way to have a stable environment? Regards Ignacio SensoWave 2015-03-13 15:12 GMT+01:00 Krunoslav Hrnjak : > Dear sirs, > I have changed region to Stockholm but unfortunately, now it is not > possible to start new Instance. FiWare lab seems not usable. > > [image: Inline images 1] > > Srda?no > > Krunoslav Hrnjak, > dipl. ing. el., univ. spec. oec., PMP, > stalni sudski vje?tak > za podru?je informatike, > elektrotehnike i telekomunikacija > > Zagreba?ka 126, > HR-10410 Velika Gorica > > Krunoslav at yottabyte.HR > http://www.yottabyte.HR > 095/517-4201 > > Molim razmislite o okoli?u prije ispisa > > On 10 March 2015 at 11:25, Krunoslav Hrnjak > wrote: > >> Dear Sirs, >> >> I have tried access FiWareLab and obtain only ONE floating IP address >> several times. Unfortunatly, I get: "message": "NoMoreFloatingIps: Zero >> floating ips available.", is it possible for Finodex participants to get >> some more resources in Lab, and also to get static IP address,so we coud be >> able to map DNS like digmap-lab.yottabyte.hr to assigned IP address (or >> somebody could map IP adress to digmap.cloud.lab.fiware.org). >> At the moment it is not possible to try out how lab works. >> >> Srda?no, Krunoslav >> >> > > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 117158 bytes Desc: not available URL: From pabloestrada1984 at gmail.com Fri Mar 20 09:27:19 2015 From: pabloestrada1984 at gmail.com (Pablo Estrada) Date: Fri, 20 Mar 2015 09:27:19 +0100 Subject: [Fiware-finodex-coaching] Fiware Finodex question Message-ID: Hi ! I'm Pablo, from GEEZAR Soluciones SL, nice to meet you. Sorry I wrote previously with the wrong email account. We have a question: Our project is about monitoring air conditions on vegetables and fruit transport, including temperature, humidity, GPS, and Ethilene. The data is sent via GPRS. In our first project proposal for Finodex, we assumed we were going to use this Fiware schema Orion Context Broker, IoT, Cosmos, Wirecloud, CEP, and OpenStreetMaps as OpenData after the Fiware developers week I attended last week in Madrid, I met Francisco Romero (big data expert) and talked about this schema with him The result of that conversation was this new schema Orion Context Broker, Cygnus subscribed to Orion and historical data to a MySQL. Also using OpenStreetMaps. ?and... CEP? Because, perhaps, we can make our sensors speak JSON and comunicate directly with the Context Broker, so we dont need IoT Wirecloud is useful, but we just need to view a route in a map and some graphics, not really need Wirecloud. Cygnus would be subscribed to Orion and injecting data to a MySQL database where we save our data. Since we dont really need very deep data (just about 1 month of deep), we can asume, we dont use Big Data, and our problem is solved with a regular MySQL database CEP could be used to set the alarms when some context data is over a limit We would be very pleased to know your opinion about this new schema. So, the fact is that our schema has changed and we need to know if that supposes a problem in terms of the Finodex evaluation Because I now know what I need, but is different than what we said before Thank you very much regards, -- [image: GEEZAR Soluciones SL] Pablo Estrada Le?n GEEZAR Soluciones SL *http://geezar.blogspot.es/* CEEI C/Mar?a de Luna 11, Nave 2, abajo derecha 50018 Zaragoza Tel?fono: 976-960852 E-mail: info at geezar.es -------------- next part -------------- An HTML attachment was scrubbed... URL: From pabloestrada at geezar.es Fri Mar 20 09:23:11 2015 From: pabloestrada at geezar.es (Pablo Estrada) Date: Fri, 20 Mar 2015 09:23:11 +0100 (CET) Subject: [Fiware-finodex-coaching] Finodex Fiware architecture question Message-ID: <601664721.1507084.1426839791680.JavaMail.open-xchange@omgreatgod.store> Hi ! I'm Pablo, from GEEZAR Soluciones SL, nice to meet you. We have a question: Our project is about monitoring air conditions on vegetables and fruit transport, including temperature, humidity, GPS, and Ethilene. The data is sent via GPRS. In our first project proposal for Finodex, we assumed we were going to use this Fiware schema Orion Context Broker, IoT, Cosmos, Wirecloud, CEP, and OpenStreetMaps as OpenData after the Fiware developers week I attended last week in Madrid, I met Francisco Romero (big data expert) and talked about this schema with him The result of that conversation was this new schema Orion Context Broker, Cygnus subscribed to Orion and historical data to a MySQL. Also using OpenStreetMaps. ?and... CEP? Because, perhaps, we can make our sensors speak JSON and comunicate directly with the Context Broker, so we dont need IoT Wirecloud is useful, but we just need to view a route in a map and some graphics, not really need Wirecloud. Cygnus would be subscribed to Orion and injecting data to a MySQL database where we save our data. Since we dont really need very deep data (just about 1 month of deep), we can asume, we dont use Big Data, and our problem is solved with a regular MySQL database CEP could be used to set the alarms when some context data is over a limit We would be very pleased to know your opinion about this new schema. So, the fact is that our schema has changed and we need to know if that supposes a problem in terms of the Finodex evaluation Because I now know what I need, but is different than what we said before Thank you very much regards, [GEEZAR Soluciones SL] Pablo Estrada Le?n GEEZAR Soluciones SL BLOG GEEZAR CEEI C/Mar?a de Luna 11, Nave 2, abajo derecha 50018 Zaragoza Tel?fono: 976-960852 E-mail: info at geezar.es -------------- next part -------------- An HTML attachment was scrubbed... URL: From pvitale at eng.it Fri Mar 20 15:12:39 2015 From: pvitale at eng.it (Pasquale Vitale) Date: Fri, 20 Mar 2015 15:12:39 +0100 Subject: [Fiware-finodex-coaching] Fiware Finodex question In-Reply-To: References: Message-ID: <550C2AD7.2070101@eng.it> Hi Pablo, your proposal will be still accepted because you are going to use the FIWARE technologies. We can only drop a proposal from the accelerator if they do not use FIWARE at all. But reducing the scope of what it is written in the proposal vs the reality will have an impact in the evaluations and that it will be the task of evaluators to measure this impact. Regards, Pasquale Il 20/03/2015 09:27, Pablo Estrada ha scritto: > > Hi ! I'm Pablo, from GEEZAR Soluciones SL, nice to meet you. > Sorry I wrote previously with the wrong email account. > We have a question: > Our project is about monitoring air conditions on vegetables and fruit > transport, including temperature, humidity, GPS, and Ethilene. The > data is sent via GPRS. > In our first project proposal for Finodex, we assumed we were going to > use this Fiware schema > Orion Context Broker, IoT, Cosmos, Wirecloud, CEP, and OpenStreetMaps > as OpenData > after the Fiware developers week I attended last week in Madrid, I met > Francisco Romero (big data expert) and talked about this schema with him > The result of that conversation was this new schema > Orion Context Broker, Cygnus subscribed to Orion and historical data > to a MySQL. Also using OpenStreetMaps. ?and... CEP? > Because, perhaps, we can make our sensors speak JSON and comunicate > directly with the Context Broker, so we dont need IoT > Wirecloud is useful, but we just need to view a route in a map and > some graphics, not really need Wirecloud. > Cygnus would be subscribed to Orion and injecting data to a MySQL > database where we save our data. > Since we dont really need very deep data (just about 1 month of deep), > we can asume, we dont use Big Data, and our problem is solved with a > regular MySQL database > CEP could be used to set the alarms when some context data is over a limit > We would be very pleased to know your opinion about this new schema. > So, the fact is that our schema has changed and we need to know if > that supposes a problem in terms of the Finodex evaluation > Because I now know what I need, but is different than what we said before > Thank you very much > regards, > -- > GEEZAR Soluciones SL > > Pablo Estrada Le?n > GEEZAR Soluciones SL > *http://geezar.blogspot.es/* > CEEI C/Mar?a de Luna 11, Nave 2, abajo derecha > 50018 Zaragoza > Tel?fono: 976-960852 > E-mail:info at geezar.es > > > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching -------------- next part -------------- An HTML attachment was scrubbed... URL: From pabloestrada1984 at gmail.com Mon Mar 23 16:23:55 2015 From: pabloestrada1984 at gmail.com (Pablo Estrada) Date: Mon, 23 Mar 2015 16:23:55 +0100 Subject: [Fiware-finodex-coaching] installing OrionContextBroker 0.19 on CentOS 7 Message-ID: Hi, I have a problem while installing OrionContextBroker 0.19 on CentOS 7 Here you can find the explanation http://stackoverflow.com/questions/29213234/installing-orioncontextbroker-0-19-fiware-on-centos-7?noredirect=1#comment46636211_29213234 or here https://serverfault.com/questions/677608/installing-orioncontextbroker-0-19-fiware-on-centos-7 I'm following the installation guide at https://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/Publish/Subscribe_Broker_-_Orion_Context_Broker_-_Installation_and_Administration_Guide#Installation The problem appears when installing OrionContextBroker yum install contextBroker Thank you very much Regards -- [image: GEEZAR Soluciones SL] Pablo Estrada Le?n GEEZAR Soluciones SL *http://geezar.blogspot.es/* CEEI C/Mar?a de Luna 11, Nave 2, abajo derecha 50018 Zaragoza Tel?fono: 976-960852 E-mail: info at geezar.es -------------- next part -------------- An HTML attachment was scrubbed... URL: From antonio.gonzalez at talkykar.com Thu Mar 26 12:15:35 2015 From: antonio.gonzalez at talkykar.com (antonio.gonzalez at talkykar.com) Date: Thu, 26 Mar 2015 12:15:35 +0100 Subject: [Fiware-finodex-coaching] WireCloud-Map Viewer no muestra PoI Message-ID: Hola, soy Antonio, de talkykar.com. Tenemos un problema con el widget Map Viewer de WireCloud y es que no conseguimos hacer que muestre las coordenadas de las entidades que tenemos creadas. La conexi?n con el Context Broker es correcta ya que el widget NGSI Updater nos permite modificar todos los atributos de dichas entidades. Hemos utilizado el ejemplo de ?lvaro Arranz importando su mashup a nuestro Workspace y muestra correctamente los PoI en el mapa, por lo que no parece un problema del navegador. Le adjunto un archivo de ejemplo con el JSON de la creaci?n correcta de una entidad . Para mostrar las coordenadas de dicha entidad configuramos los widgets as?: NGSI SOURCE NGSI server URL: http://orion.lab.fi-ware.eu:1026/ NGSI proxy URL: https://ngsiproxy.lab.fiware.org Use the FIWARE credentials of the user NGSI entity types: TestSensor Id pattern: Sensor.* Monitored NGSI Attributes: current_position NGSI Entity to PoI Coordinates attribute: current_position Le agradecer?amos que nos explicara lo que estamos haciendo mal. Gracias de antemano. Un saludo. -------------- next part -------------- A non-text attachment was scrubbed... Name: ejemplo.json Type: application/octet-stream Size: 737 bytes Desc: not available URL: From heliodiassilva at gmail.com Fri Mar 27 10:15:54 2015 From: heliodiassilva at gmail.com (=?UTF-8?B?SMOpbGlvIFNpbHZh?=) Date: Fri, 27 Mar 2015 09:15:54 +0000 Subject: [Fiware-finodex-coaching] Support Message-ID: <55151FCA.20602@gmail.com> Dear Fiware friends, On behalf of FireRisk project (Finodex) I would like to know if it's possible to arrange an audio call (Skype?) to discuss the following matters: * FIWARE architecture and Generic Enabler integration * What to expect when FIWARE acceleration programs finish, is FIWARE still going to be online, if so, is it going to be paid, how ? Thanks. Best regards, H?lio Silva - FireRisk - Software Developer -------------- next part -------------- An HTML attachment was scrubbed... URL: From imaqueda at sensowave.com Mon Mar 30 20:02:39 2015 From: imaqueda at sensowave.com (Ignacio Gomez Maqueda) Date: Mon, 30 Mar 2015 20:02:39 +0200 Subject: [Fiware-finodex-coaching] technical document structure Message-ID: Dear collegues, I have a quick answer related with the technical document to be made. Is it possible to include an annex to add any additional information about our project? Thanks Best Regards Ignacio Gomez SensoWave -------------- next part -------------- An HTML attachment was scrubbed... URL: From krunoslav at yottabyte.hr Tue Mar 31 10:14:08 2015 From: krunoslav at yottabyte.hr (Krunoslav Hrnjak) Date: Tue, 31 Mar 2015 10:14:08 +0200 Subject: [Fiware-finodex-coaching] FiWareLab resources In-Reply-To: References: Message-ID: Dear all, I have spent several hours trying to setup a virtual machine on FI Lab. Unfortunately still no success with assignment of IP to the host. I have quite some experience with different VPS hosting and basicy it seems rather simple task to setup Linux virtual machine but it is impossible to make it in FI lab. I already have a demo of my application http://digmap-lab.yottabyte.hr/DigMap/ and I would like to set it up in FI lab using FiWare GE's. Please give me some advice or help. Is it possible to take some resources and dedicate those resources to Finodex participants? Kind regard, Krunoslav Srda?no Krunoslav Hrnjak, dipl. ing. el., univ. spec. oec., PMP, stalni sudski vje?tak za podru?je informatike, elektrotehnike i telekomunikacija Zagreba?ka 126, HR-10410 Velika Gorica Krunoslav at yottabyte.HR http://www.yottabyte.HR 095/517-4201 Molim razmislite o okoli?u prije ispisa On 13 March 2015 at 16:59, Ignacio Gomez Maqueda wrote: > Dear sirs, > > Following with Krunoslav comments, we are also experiencing problems with > fiware labs. We have a floating ip (in Zurich and in Spain2 region), but > from time to time it stops to work and it starts to work again later and so > on. Is there any way to have a stable environment? > > Regards > Ignacio > SensoWave > > 2015-03-13 15:12 GMT+01:00 Krunoslav Hrnjak : > >> Dear sirs, >> I have changed region to Stockholm but unfortunately, now it is not >> possible to start new Instance. FiWare lab seems not usable. >> >> [image: Inline images 1] >> >> Srda?no >> >> Krunoslav Hrnjak, >> dipl. ing. el., univ. spec. oec., PMP, >> stalni sudski vje?tak >> za podru?je informatike, >> elektrotehnike i telekomunikacija >> >> Zagreba?ka 126, >> HR-10410 Velika Gorica >> >> Krunoslav at yottabyte.HR >> http://www.yottabyte.HR >> 095/517-4201 >> >> Molim razmislite o okoli?u prije ispisa >> >> On 10 March 2015 at 11:25, Krunoslav Hrnjak >> wrote: >> >>> Dear Sirs, >>> >>> I have tried access FiWareLab and obtain only ONE floating IP address >>> several times. Unfortunatly, I get: "message": "NoMoreFloatingIps: Zero >>> floating ips available.", is it possible for Finodex participants to get >>> some more resources in Lab, and also to get static IP address,so we coud be >>> able to map DNS like digmap-lab.yottabyte.hr to assigned IP address (or >>> somebody could map IP adress to digmap.cloud.lab.fiware.org). >>> At the moment it is not possible to try out how lab works. >>> >>> Srda?no, Krunoslav >>> >>> >> >> _______________________________________________ >> Fiware-finodex-coaching mailing list >> Fiware-finodex-coaching at lists.fi-ware.org >> https://lists.fi-ware.org/listinfo/fiware-finodex-coaching >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 117158 bytes Desc: not available URL: From imaqueda at sensowave.com Tue Mar 31 10:23:43 2015 From: imaqueda at sensowave.com (Ignacio Maqueda) Date: Tue, 31 Mar 2015 10:23:43 +0200 Subject: [Fiware-finodex-coaching] FiWareLab resources In-Reply-To: References: Message-ID: <551A598F.10501@sensowave.com> Hi Krunoslav, In the Madrid Fiware developers' week, staff members told me that the best regions to work with are: Crete, Zurich and Spain2. I don't know if this will help. Also you can try with the public instance. Anyway, I agree with Krunoslav that having resources for Finodex participants will help a lot. Regards Ignacio El 31/03/2015 a las 10:14, Krunoslav Hrnjak escribi?: > Dear all, > I have spent several hours trying to setup a virtual machine on FI > Lab. Unfortunately still no success with assignment of IP to the host. > I have quite some experience with different VPS hosting and basicy it > seems rather simple task to setup Linux virtual machine but it is > impossible to make it in FI lab. I already have a demo of my > application http://digmap-lab.yottabyte.hr/DigMap/ and I would like to > set it up in FI lab using FiWare GE's. Please give me some advice or > help. Is it possible to take some resources and dedicate those > resources to Finodex participants? > > Kind regard, Krunoslav > > Srda?no > > Krunoslav Hrnjak, > dipl. ing. el., univ. spec. oec., PMP, > stalni sudski vje?tak > za podru?je informatike, > elektrotehnike i telekomunikacija > > Zagreba?ka 126, > HR-10410 Velika Gorica > > Krunoslav at yottabyte.HR > http://www.yottabyte.HR > 095/517-4201 > > Molim razmislite o okoli?u prije ispisa > > On 13 March 2015 at 16:59, Ignacio Gomez Maqueda > > wrote: > > Dear sirs, > > Following with Krunoslav comments, we are also experiencing > problems with fiware labs. We have a floating ip (in Zurich and in > Spain2 region), but from time to time it stops to work and it > starts to work again later and so on. Is there any way to have a > stable environment? > > Regards > Ignacio > SensoWave > > 2015-03-13 15:12 GMT+01:00 Krunoslav Hrnjak > >: > > Dear sirs, > I have changed region to Stockholm but unfortunately, now it > is not possible to start new Instance. FiWare lab seems not > usable. > > Inline images 1 > > Srda?no > > Krunoslav Hrnjak, > dipl. ing. el., univ. spec. oec., PMP, > stalni sudski vje?tak > za podru?je informatike, > elektrotehnike i telekomunikacija > > Zagreba?ka 126, > HR-10410 Velika Gorica > > Krunoslav at yottabyte.HR > http://www.yottabyte.HR > 095/517-4201 > > Molim razmislite o okoli?u prije ispisa > > On 10 March 2015 at 11:25, Krunoslav Hrnjak > > wrote: > > Dear Sirs, > > I have tried access FiWareLab and obtain only ONE > floating IP address several times. Unfortunatly, I get: > "message": "NoMoreFloatingIps: Zero floating ips > available.", is it possible for Finodex participants to > get some more resources in Lab, and also to get static IP > address,so we coud be able to map DNS like > digmap-lab.yottabyte.hr > to assigned IP address (or somebody could map IP adress to > digmap.cloud.lab.fiware.org > ). > At the moment it is not possible to try out how lab works. > > Srda?no, Krunoslav > > > > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/png Size: 117158 bytes Desc: not available URL: From pvitale at eng.it Tue Mar 31 12:05:37 2015 From: pvitale at eng.it (Pasquale Vitale) Date: Tue, 31 Mar 2015 12:05:37 +0200 Subject: [Fiware-finodex-coaching] technical document structure In-Reply-To: References: Message-ID: <551A7171.6000800@eng.it> Hi Ignacio, yes you can add the annex, but I recommend to not use much information, as there is not a criteria for number of pages and evaluators may get angry if they see too much to evaluate without a justified added value. For example use max 10 pages, but, if you can, less is better. Regards Pasquale Il 30/03/2015 20:02, Ignacio Gomez Maqueda ha scritto: > Dear collegues, > > I have a quick answer related with the technical document to be made. > Is it possible to include an annex to add any additional information > about our project? > > Thanks > > Best Regards > Ignacio Gomez > SensoWave > > > _______________________________________________ > Fiware-finodex-coaching mailing list > Fiware-finodex-coaching at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-finodex-coaching -------------- next part -------------- An HTML attachment was scrubbed... URL: