[Fiware-lab-help] [Fiware-portals] Fwd:

[Javier Cerviño]

Hi Federico,

In regions that do not have neutron (like the one in Spain) you can see in
the Cloud Portal that the script is not filled, so you it shouldn't be a
problem at all.

Cheers,
Javier.


On 27 August 2014 12:27, HENAR MUÑOZ FRUTOS <
henar.munozfrutos at telefonica.com> wrote:

>  Hi
>
> This script is valid for Centos and Ubuntu and it has been testbed in a
> Havanna installation.
>
> Regards,
>
> Henar
>
>
>
> *De:* federico.facca at gmail.com [mailto:federico.facca at gmail.com] *En
> nombre de *Federico Michele Facca
> *Enviado el:* miércoles, 27 de agosto de 2014 12:25
> *Para:* HENAR MUÑOZ FRUTOS
> *CC:* fiware-lab-help at lists.fi-ware.org; fiware-portals at lists.fi-ware.org;
> giuseppe.cossu at create-net.org
> *Asunto:* Re: [Fiware-lab-help] Fwd:
>
>
>
> hi henar,
>
> i know for the chef/puppet part (i recall discussing this with fernando).
> the problem is that the script may not work on something different from
> centos, and that network configuration is largely depending also on the
> openstack set-up. for example spain does not use yet neutron. not sure if
> this was properly tested on all combinations.
>
>
>
> cheers,
>
> federico
>
>
>
> On Wed, Aug 27, 2014 at 12:05 PM, HENAR MUÑOZ FRUTOS <
> henar.munozfrutos at telefonica.com> wrote:
>
>  Hi
>
>
>
> We are using the user_data funciontality plus cloud-init library to
> configure the VMs. For instance, if a VM is deployed on two networks, the
> VM needs to have two network interface. The way to do that is by the
> cloud-init configuration. We agree with UPM portal to show this script, so
> that, the user is aware we are configuring its VM. In addition, we are
> using this cloud-init configuration to install the chef and puppet for
> blueprint configuration.
>
> Regards,
>
> Henar
>
>
>
> *De:* fiware-lab-help-bounces at lists.fi-ware.org [mailto:
> fiware-lab-help-bounces at lists.fi-ware.org] *En nombre de *Federico
> Michele Facca
> *Enviado el:* miércoles, 27 de agosto de 2014 12:01
> *Para:* fiware-lab-help at lists.fi-ware.org
> *Asunto:* [Fiware-lab-help] Fwd:
>
>
>
> does anyone knows why this was introduced?
>
> ---------- Forwarded message ----------
> From: *Giuseppe Cossu* <giuseppe.cossu at create-net.org>
> Date: Wed, Aug 27, 2014 at 11:57 AM
> Subject:
> To: Federico Michele Facca <federico.facca at create-net.org>
>
> Federico,
>
> I noticed that the Cloud Portal uses a default script configuration (look
> at the attached file and below) when a try to boot a VM.
>
> This script is the same for all XIFI nodes and for all the images. Is it
> useful?
>
> The images I’ve tried work fine without this script that seems designed
> only for CentOS images.
>
>
>
> Giuseppe
>
>
>
>
> ----------------------------------------------------------------------------------------
>
>
>
> # This script automatically installs network interfaces in the instance.
>
> # You can modify it, but be careful not to change network configuration.
>
> write_files:
>
> - encoding: b64
>
>   content: |
>
>
> YXV0byBsbyAKaWZhY2UgbG8gaW5ldCBsb29wYmFjawogYXV0byBldGgwIAogaWZhY2UgZXRoMCAgaW5ldCBkaGNwCg==
>
>   path: /etc/network/interfaces
>
>
>
> - content: |
>
>     DEVICE="eth0"
>
>     NM_CONTROLLED="yes"
>
>     ONBOOT="yes"
>
>     BOOTPROTO="dhcp"
>
>     TYPE="Ethernet"
>
>   path: /etc/sysconfig/network-scripts/ifcfg-eth0
>
>   permissions: '460'
>
>
>
> bootcmd:
>
>   - ifup eth0
>
>
>
> --------------------------------------------------------
>
> Giuseppe Cossu
>
> CREATE-NET
>
> Smart Infrastructures
>
> Research Engineer
>
> Via alla Cascata 56/D - 38123 Povo Trento (Italy)
>
> e-mail: giuseppe.cossu at create-net.org
>
> Tel: (+39) 0461 408400 - interno/extension [1316]
>
> Fax: (+39) 0461 421157
>
> www.create-net.org
>
> --------------------------------------------------------
>
>
>
>
>
>
>
> --
> Dr. Federico M. Facca
>
> CREATE-NET
> Via alla Cascata 56/D
> 38123 Povo Trento (Italy)
>
> T  +39 0461 408400 (1669)
> F  +39 0461 421157
>
> M +39 334 6049758
> E  federico.facca at create-net.org
> W  www.create-net.org
>
>
>  ------------------------------
>
>
> Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario,
> puede contener información privilegiada o confidencial y es para uso
> exclusivo de la persona o entidad de destino. Si no es usted. el
> destinatario indicado, queda notificado de que la lectura, utilización,
> divulgación y/o copia sin autorización puede estar prohibida en virtud de
> la legislación vigente. Si ha recibido este mensaje por error, le rogamos
> que nos lo comunique inmediatamente por esta misma vía y proceda a su
> destrucción.
>
> The information contained in this transmission is privileged and
> confidential information intended only for the use of the individual or
> entity named above. If the reader of this message is not the intended
> recipient, you are hereby notified that any dissemination, distribution or
> copying of this communication is strictly prohibited. If you have received
> this transmission in error, do not read it. Please immediately reply to the
> sender that you have received this communication in error and then delete
> it.
>
> Esta mensagem e seus anexos se dirigem exclusivamente ao seu destinatário,
> pode conter informação privilegiada ou confidencial e é para uso exclusivo
> da pessoa ou entidade de destino. Se não é vossa senhoria o destinatário
> indicado, fica notificado de que a leitura, utilização, divulgação e/ou
> cópia sem autorização pode estar proibida em virtude da legislação vigente.
> Se recebeu esta mensagem por erro, rogamos-lhe que nos o comunique
> imediatamente por esta mesma via e proceda a sua destruição
>
>
>
>
>
> --
> Dr. Federico M. Facca
>
> CREATE-NET
> Via alla Cascata 56/D
> 38123 Povo Trento (Italy)
>
> T  +39 0461 408400 (1669)
> F  +39 0461 421157
>
> M +39 334 6049758
> E  federico.facca at create-net.org
> W  www.create-net.org
>
> ------------------------------
>
> Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario,
> puede contener información privilegiada o confidencial y es para uso
> exclusivo de la persona o entidad de destino. Si no es usted. el
> destinatario indicado, queda notificado de que la lectura, utilización,
> divulgación y/o copia sin autorización puede estar prohibida en virtud de
> la legislación vigente. Si ha recibido este mensaje por error, le rogamos
> que nos lo comunique inmediatamente por esta misma vía y proceda a su
> destrucción.
>
> The information contained in this transmission is privileged and
> confidential information intended only for the use of the individual or
> entity named above. If the reader of this message is not the intended
> recipient, you are hereby notified that any dissemination, distribution or
> copying of this communication is strictly prohibited. If you have received
> this transmission in error, do not read it. Please immediately reply to the
> sender that you have received this communication in error and then delete
> it.
>
> Esta mensagem e seus anexos se dirigem exclusivamente ao seu destinatário,
> pode conter informação privilegiada ou confidencial e é para uso exclusivo
> da pessoa ou entidade de destino. Se não é vossa senhoria o destinatário
> indicado, fica notificado de que a leitura, utilização, divulgação e/ou
> cópia sem autorização pode estar proibida em virtude da legislação vigente.
> Se recebeu esta mensagem por erro, rogamos-lhe que nos o comunique
> imediatamente por esta mesma via e proceda a sua destruição
>
> _______________________________________________
> Fiware-portals mailing list
> Fiware-portals at lists.fi-ware.org
> https://lists.fi-ware.org/listinfo/fiware-portals
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.fiware.org/private/fiware-lab-help/attachments/20140827/56b32e76/attachment.html>