Hi, I’m trying to complete the SME Project Proposal for the FI-ADOPT programme, however I am having trouble with section 2.2 and 2.3 of the form. At the moment, I have access to the FI-LAB platform and the Generic Enablers featured there. The issues I have are as follows: 1) The form asks us to describe the FI-PPP use case technologies to be utilised. The most relevant use case to our project is the FI-STAR use case. I can see the Specific Enablers in the FI-STAR catalogue however there is very little information here. Is there any further information on these Specific Enablers? Also, how do I gain access to the FI-STAR Specific Enablers? I have contacted the catalogue administrator but received no reply. 2) The form asks us to describe how we will test and validate our project using the FI-PPP facilities. Am I right in assuming that the ‘FI-PPP facilities’ are the FI-WARE testbed? If so, how do I gain access to the FI-WARE test bed. If not, please could you tell me specifically, what are the ‘FI-PPP’ facilities? All best, David Gibson 500 More Limited www.500more.com dave at 500more.com > Begin forwarded message: > > From: Fiona Rivera <fi-adopt at emc-square.org> > Subject: Re: FI-ADOPT application > Date: 27 October 2014 14:54:13 GMT > To: David Gibson <dave at 500more.com> > > Dear David, > > I have received some clarification regarding the testing and validation, and have been informed that you should refer to FIWARE-LAB <http://www.fi-ware.org/lab/> and the infrastructures for experimentation with FIWARE for the testing and validation section. Their help desk is fiware-lab-help at lists.fi-ware.org <mailto:fiware-lab-help at lists.fi-ware.org> if you need to ask them for further information. > > Regards > Fiona Rivera > > On 24 Oct 2014, at 18:04, Fiona Rivera <fi-adopt at emc-square.org <mailto:fi-adopt at emc-square.org>> wrote: > >> Dear David, >> >> I am awaiting clarification, but meanwhile I suggest that you continue to search for any FI-Ware and FI-PPP Testing and Validation facilities. The previous link was one suggestion, but you can also look through the GEs <http://catalogue.fi-ware.org/enablers>to see if you find anything that might apply, and perhaps raise a question with FI-WARE <http://www.fi-ware.org/contact-us/>. I will get back to you when I have more information. >> >> Regards >> Fiona >> >> On 23 Oct 2014, at 16:08, Fiona Rivera <fi-adopt at emc-square.org <mailto:fi-adopt at emc-square.org>> wrote: >> >>> Dear David, >>> >>> I believe that the Validation and Testing refers to http://catalogue.fi-ware.org/tools <http://catalogue.fi-ware.org/tools>, but am still double checking and will get back to you to confirm. >>> >>> Regards >>> Fiona >>> >>> On 22 Oct 2014, at 15:53, David Gibson <dave at 500more.com <mailto:dave at 500more.com>> wrote: >>> >>>> Ok great, thanks Fiona. >>>> >>>> David Gibson >>>> 500 More Limited >>>> >>>> www.500more.com <http://www.500more.com/> >>>> dave at 500more.com <mailto:dave at 500more.com> >>>> >>>> >>>>> On 22 Oct 2014, at 15:02, Fiona Rivera <fi-adopt at emc-square.org <mailto:fi-adopt at emc-square.org>> wrote: >>>>> >>>>> Hello, >>>>> >>>>> Regarding the Use Cases, yes the use cases can be found on http://www.fi-ppp.eu/projects/ <http://www.fi-ppp.eu/projects/> and a list is also provided in the FAQs <http://fiadopt-project.eu/wp-content/uploads/2014/10/04-FIADOPT_FAQ_v3.01_20141002.pdf>(q3) . The FI-PPP technologies refer to the Specific Enablers which can be found by looking at the catalogues provided by the Use Cases. >>>>> >>>>> I will get back to you regarding your question about Testing and Validation. >>>>> >>>>> Regards >>>>> Fiona >>>>> >>>>> On 22 Oct 2014, at 11:25, Fiona Rivera <fi-adopt at emc-square.org <mailto:fi-adopt at emc-square.org>> wrote: >>>>> >>>>>> Dear David, >>>>>> >>>>>> Thank you for your enquiry. I will double check some things and get back to you. >>>>>> >>>>>> Regards >>>>>> Fiona Rivera >>>>>> >>>>>> On 21 Oct 2014, at 16:59, David Gibson <dave at 500more.com <mailto:dave at 500more.com>> wrote: >>>>>> >>>>>>> Hello, >>>>>>> >>>>>>> I am currently preparing our proposal for FI-ADOPT and I am using the "1st Open Call - SME Project Proposal Template". However, I have some questions regarding section 2 of the application form (the section is entitled "2. FIWARE ADOPTION ACCELERATION"). Please could you give me further details around the following: >>>>>>> >>>>>>> Q1) In "2.2 FI-PPP Use Cases Technology to be utilized", the form asks for a description of our use of the FI-PPP Use Case Technologies. However, I am unsure which use cases/technologies this section of the form is referring to. >>>>>>> >>>>>>> * Are the use cases those mentioned here - http://www.fi-ppp.eu/projects/ <http://www.fi-ppp.eu/projects/>? (for example, FI-STAR for eHealth applications) >>>>>>> * This part of the form also refers to FI-PPP technology - what are the FI-PPP technologies? >>>>>>> >>>>>>> Q2) In “2.3 Testing and validation plans”, the form asks how we will test and validate our solution using the FI-PPP facilities. What are the FI-PPP facilities that we will gain access to? >>>>>>> >>>>>>> Many thanks in advance for clarifying these points. >>>>>>> >>>>>>> All best, >>>>>>> >>>>>>> David Gibson >>>>>>> 500 More Limited >>>>>>> >>>>>>> www.500more.com <http://www.500more.com/> >>>>>>> dave at 500more.com <mailto:dave at 500more.com> >>>>>>> >>>>>> >>>>> >>>> >>> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://lists.fiware.org/private/fiware-lab-help/attachments/20141027/30317f25/attachment.html>
You can get more information about our cookies and privacy policies clicking on the following links: Privacy policy Cookies policy