Dear Philip, public IPs are a very scarce resource, in particular if you need two in parallel (one for the public router and one for the exposed host, as this is the case for the Berlin node). Could you please formulate your requirements first: - do you need acces from a VM to the public Internet - do you need access to a VM from another host via the Internet - how many VMs must be accessible from the Internet - what services do the VMs run (i.e. which ports must be excluded from the infrastructure firewall - not the OpenStack filters, these need to be opened in addition, but this can be done by yourself). - how long do you plan to utilize allocated floating IPs Possible solutions depend on these requirement. I checked and found that we may be able to free up max. two IPs (1 public router, 1 VM) for your tenant. If this is sufficient, you may contact me aside the list. BTW. The due reason for this IP scarcety is mainly that tenants allocate floating IPs and don't release them after they finished their tests. The infrastructures have very few means to identify unused tenants. Please understand that we still have to find viable solutions for this problem. Best Regards, Bernd ============ Bernd Bochow Next Generation Network Infrastructures Fraunhofer Institute for Open Communication Systems (FOKUS) Kaiserin-Augusta-Allee 31, D-10589 Berlin e-mail: bernd.bochow at fokus.fraunhofer.de<mailto:bernd.bochow at fokus.fraunhofer.de>, bernd.bochow at ieee.org<mailto:bernd.bochow at ieee.org> phone: +49 30 3463-7238 fax: +49 30 3463-997238 On 12 Sep 2014, at 12:20, Philip Reimer wrote: Hi again, so I tried with all the other nodes (Berlin, Prague, etc.) and none of them worked at all: - Either I couldn’t allocate a floating IP due to exceeded limit or some “Unknown error” - Or there was no network to select during instance creation which caused the newly created instance to remain in state “ERROR” and unusable - Or I only got an IP like 192… which could not be connected to a floating IP and was not reachable from my machine. Could someone please look into these issues and explain how I can get a second VM that I can access via SSH from my machine? Thanks in advance, Philip Von: Philip Reimer Gesendet: Freitag, 12. September 2014 10:56 An: 'JOSE IGNACIO CARRETERO GUARDE'; 'fiware-lab-help at lists.fi-ware.eu<mailto:fiware-lab-help at lists.fi-ware.eu>'; HENAR MUÑOZ FRUTOS Betreff: AW: AW: [Fiware-lab-help] http://cloud.lab.fi-ware.org/ down? Hi, I need my instance to be accessible from the outside world. I am working for the EU Project FIspace, which is part of FI-PPP program. I have no idea how to implement this NAT and Port Forwarding. Can I get another floating IP in one of the other nodes – the Berlin one or some other? Cheers, Philip Von: JOSE IGNACIO CARRETERO GUARDE [mailto:joseignacio.carreteroguarde at telefonica.com] Gesendet: Freitag, 12. September 2014 10:35 An: Philip Reimer; 'fiware-lab-help at lists.fi-ware.eu<mailto:fiware-lab-help at lists.fi-ware.eu>'; HENAR MUÑOZ FRUTOS Betreff: Re: AW: [Fiware-lab-help] http://cloud.lab.fi-ware.org/ down? Hi, You can't extend the limit of Floating IPs. This must be done by administrators. However, as Public IPs are scarce and a expensive resource, we have set the limit to 1 IP in the Spanish node. --- You can access all your others VMs doing NAT and Port Forwarding. Best regards, José Ignacio. El 12/09/14 a las #4, Philip Reimer escribió: Hi, thanks for the quick response. It is working now. However, I cannot allocate a floating IP to my new instance – it is only my second instance. It tells me that I have “exceeded the limit of Floating IPs”. How can I extend my current limit of 1 floating IP, so that I can access my second instance via ssh? Thanks in advance Cheers, Philip Von: JOSE IGNACIO CARRETERO GUARDE [mailto:joseignacio.carreteroguarde at telefonica.com] Gesendet: Freitag, 12. September 2014 08:47 An: Philip Reimer; 'fiware-lab-help at lists.fi-ware.eu<mailto:fiware-lab-help at lists.fi-ware.eu>'; HENAR MUÑOZ FRUTOS Betreff: Re: [Fiware-lab-help] http://cloud.lab.fi-ware.org/ down? Hi, Thank you very much for your feedback. This should be corrected now. Best regards, José Ignacio. El 11/09/14 a las #4, Philip Reimer escribió: Hi again, here is the complete error message I get: Error: EMFILE, too many open files '/root/fi-ware-cloud-portal/views/index.ejs' at Object.fs.openSync (fs.js:427:18) at fs.readFileSync (fs.js:284:15) at View.exports.renderFile [as engine] (/root/fi-ware-cloud-portal/node_modules/ejs/lib/ejs.js:312:9) at View.render (/root/fi-ware-cloud-portal/node_modules/express/lib/view.js:75:8) at Function.app.render (/root/fi-ware-cloud-portal/node_modules/express/lib/application.js:504:10) at ServerResponse.res.render (/root/fi-ware-cloud-portal/node_modules/express/lib/response.js:753:7) at app.all.resp.time_stats.serv (/root/fi-ware-cloud-portal/server.js:232:7) at callbacks (/root/fi-ware-cloud-portal/node_modules/express/lib/router/index.js:161:37) at param (/root/fi-ware-cloud-portal/node_modules/express/lib/router/index.js:135:11) at pass (/root/fi-ware-cloud-portal/node_modules/express/lib/router/index.js:142:5) Von: Philip Reimer Gesendet: Donnerstag, 11. September 2014 18:20 An: 'fiware-lab-help at lists.fi-ware.eu<mailto:fiware-lab-help at lists.fi-ware.eu>'; 'HENAR MUÑOZ FRUTOS' Betreff: http://cloud.lab.fi-ware.org/ down? Hi, I just tried to access http://cloud.lab.fi-ware.org/ but I get an error message about “too many open files” or something. The other parts (Store, Mashup, etc.) seem to be working though. Is there some kind of maintenance going on? When do you expect http://cloud.lab.fi-ware.org to be available again? Cheers, Philip --- Dipl.-Wi.-Inf. Philip Reimer Telefon +49 421 22092 59 Fax +49 421 22092 10 reimer at atb-bremen.de<mailto:reimer at atb-bremen.de> http://www.atb-bremen.de ATB - Institut für angewandte Systemtechnik Bremen GmbH Wiener Straße 1 D-28359 Bremen - Germany Geschäftsführer: Dr.-Ing. Dragan Stokic AG Bremen HRB 13969 Sitz der Gesellschaft: Bremen USt-Id-Nr.: DE114417522 _______________________________________________ Fiware-lab-help mailing list Fiware-lab-help at lists.fi-ware.org<mailto:Fiware-lab-help at lists.fi-ware.org> https://lists.fi-ware.org/listinfo/fiware-lab-help ________________________________ Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario, puede contener información privilegiada o confidencial y es para uso exclusivo de la persona o entidad de destino. Si no es usted. el destinatario indicado, queda notificado de que la lectura, utilización, divulgación y/o copia sin autorización puede estar prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. The information contained in this transmission is privileged and confidential information intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this transmission in error, do not read it. Please immediately reply to the sender that you have received this communication in error and then delete it. Esta mensagem e seus anexos se dirigem exclusivamente ao seu destinatário, pode conter informação privilegiada ou confidencial e é para uso exclusivo da pessoa ou entidade de destino. Se não é vossa senhoria o destinatário indicado, fica notificado de que a leitura, utilização, divulgação e/ou cópia sem autorização pode estar proibida em virtude da legislação vigente. Se recebeu esta mensagem por erro, rogamos-lhe que nos o comunique imediatamente por esta mesma via e proceda a sua destruição ________________________________ Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario, puede contener información privilegiada o confidencial y es para uso exclusivo de la persona o entidad de destino. Si no es usted. el destinatario indicado, queda notificado de que la lectura, utilización, divulgación y/o copia sin autorización puede estar prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. The information contained in this transmission is privileged and confidential information intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this transmission in error, do not read it. Please immediately reply to the sender that you have received this communication in error and then delete it. Esta mensagem e seus anexos se dirigem exclusivamente ao seu destinatário, pode conter informação privilegiada ou confidencial e é para uso exclusivo da pessoa ou entidade de destino. Se não é vossa senhoria o destinatário indicado, fica notificado de que a leitura, utilização, divulgação e/ou cópia sem autorização pode estar proibida em virtude da legislação vigente. Se recebeu esta mensagem por erro, rogamos-lhe que nos o comunique imediatamente por esta mesma via e proceda a sua destruição _______________________________________________ Fiware-lab-help mailing list Fiware-lab-help at lists.fi-ware.org<mailto:Fiware-lab-help at lists.fi-ware.org> https://lists.fi-ware.org/listinfo/fiware-lab-help -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://lists.fiware.org/private/fiware-lab-help/attachments/20140912/4bb8ae43/attachment.html>
You can get more information about our cookies and privacy policies clicking on the following links: Privacy policy Cookies policy