[Fiware-lab-help] [Fiware-finodex-coaching] FiWareLab resources

[Krunoslav Hrnjak]

Yesterday I allocated public IP, but unfortunately error occurs when I try
to assign IP to instance.

Kind regards, Krunoslav

Srdačno

Krunoslav Hrnjak,
dipl. ing. el., univ. spec. oec., PMP,
stalni sudski vještak
za područje informatike,
elektrotehnike i telekomunikacija

Zagrebačka 126,
HR-10410  Velika Gorica

Krunoslav at yottabyte.HR
http://www.yottabyte.HR <http://www.yottabyte.hr/>
095/517-4201

Molim razmislite o okolišu prije ispisa

On 14 April 2015 at 22:35, Daniele Santoro <daniele.santoro at create-net.org>
wrote:

> Dear,
>
> you could have a try in Budapest region. Today I was alb to allocate a
> public IP for testing purposes.
>
> Best,
> Daniele
>
> On 01 Apr 2015, at 14:33, Krunoslav Hrnjak <krunoslav at yottabyte.hr> wrote:
>
> > Dear all,
> >  I have given another try on Crete region. Unfortunately it is not
> possible to allocate public IP. Please help.
> >
> > Error allocating IP address. Cause: 500 Error
> > {"computeFault": {"message": "The server has either erred or is
> incapable of performing the requested operation.", "code": 500}}
> >
> >
> > <image.png>
> >
> >
> > Srdačno
> >
> > Krunoslav Hrnjak,
> > dipl. ing. el., univ. spec. oec., PMP,
> > stalni sudski vještak
> > za područje informatike,
> > elektrotehnike i telekomunikacija
> >
> > Zagrebačka 126,
> > HR-10410  Velika Gorica
> >
> > Krunoslav at yottabyte.HR
> > http://www.yottabyte.HR
> > 095/517-4201
> >
> >
> > Molim razmislite o okolišu prije ispisa
> >
> > On 31 March 2015 at 21:18, Krunoslav Hrnjak <krunoslav at yottabyte.hr>
> wrote:
> > Dear Mr. Santoro,
> >  I don't have a preference for region, I have tried out several region
> Czeck, Spain and Stochlom but till now with no sucess in setting up a
> running VM.  Seems like rather easy task, setup an image, open ports,
> generate keys alocate and associate IP, and usually this takes about ten
> minutes, but until now I had no luck, there is always some kind of error.
> >
> > Kind regards
> >
> > Srdačno
> >
> > Krunoslav Hrnjak,
> > dipl. ing. el., univ. spec. oec., PMP,
> > stalni sudski vještak
> > za područje informatike,
> > elektrotehnike i telekomunikacija
> >
> > Zagrebačka 126,
> > HR-10410  Velika Gorica
> >
> > Krunoslav at yottabyte.HR
> > http://www.yottabyte.HR
> > 095/517-4201
> >
> >
> > Molim razmislite o okolišu prije ispisa
> >
> > On 31 March 2015 at 15:41, Daniele Santoro <
> daniele.santoro at create-net.org> wrote:
> > Dear,
> >
> > Can you please tell me which region you want to use ?
> >
> >
> > Public IPs are precious resources that are sometimes not freed-up from
> users. For this reason you should find the region on which there are free
> IP in the pool.
> > If you want I’ve just deallocated a public IP from Berlin node, you can
> try to book it.
> >
> > Daniele
> >
> > On 31 Mar 2015, at 14:05, Krunoslav Hrnjak <krunoslav at yottabyte.hr>
> wrote:
> >
> > > Dear sirs,
> > >  as mr. Vitale suggested I have attached error message and information
> about VM I am using. Please help. I can not assing public IP to my VM.
> > >
> > > Error message:
> > > undefined. Cause: 400 Error
> > >
> > > {"badRequest": {"message": "Error. Unable to associate floating ip",
> "code": 400}}
> > >
> > >
> > >
> > > Find details in atacched document.
> > >
> > >
> > >
> > >
> > > Srdačno
> > >
> > > Krunoslav Hrnjak,
> > > dipl. ing. el., univ. spec. oec., PMP,
> > > stalni sudski vještak
> > > za područje informatike,
> > > elektrotehnike i telekomunikacija
> > >
> > > Zagrebačka 126,
> > > HR-10410  Velika Gorica
> > >
> > > Krunoslav at yottabyte.HR
> > > http://www.yottabyte.HR
> > > 095/517-4201
> > >
> > >
> > > Molim razmislite o okolišu prije ispisa
> > >
> > > On 31 March 2015 at 11:01, Pasquale Vitale <pvitale at eng.it> wrote:
> > > Hi,
> > > please send a mail to fiware-lab-help at lists.fi-ware.org including
> your ID, the VM you want to assign the IP and so on.
> > >
> > > Pasquale
> > >
> > >
> > > Il 31/03/2015 10:14, Krunoslav Hrnjak ha scritto:
> > >> Dear all,
> > >>  I have spent several hours trying to setup a virtual machine on FI
> Lab. Unfortunately still no success with assignment of IP to the host. I
> have quite some experience with different VPS hosting and basicy it seems
> rather simple task to setup Linux virtual machine but it is impossible to
> make it in FI lab. I already have a demo of my application
> http://digmap-lab.yottabyte.hr/DigMap/ and I would like to set it up in
> FI lab using FiWare GE's. Please give me some advice or help. Is it
> possible to take some resources and dedicate those resources to Finodex
> participants?
> > >>
> > >> Kind regard, Krunoslav
> > >>
> > >> Srdačno
> > >>
> > >> Krunoslav Hrnjak,
> > >> dipl. ing. el., univ. spec. oec., PMP,
> > >> stalni sudski vještak
> > >> za područje informatike,
> > >> elektrotehnike i telekomunikacija
> > >>
> > >> Zagrebačka 126,
> > >> HR-10410  Velika Gorica
> > >>
> > >> Krunoslav at yottabyte.HR
> > >> http://www.yottabyte.HR
> > >> 095/517-4201
> > >>
> > >>
> > >> Molim razmislite o okolišu prije ispisa
> > >>
> > >> On 13 March 2015 at 16:59, Ignacio Gomez Maqueda <
> imaqueda at sensowave.com> wrote:
> > >> Dear sirs,
> > >>
> > >> Following with Krunoslav comments, we are also experiencing problems
> with fiware labs. We have a floating ip (in Zurich and in Spain2 region),
> but from time to time it stops to work and it starts to work again later
> and so on. Is there any way to have a stable environment?
> > >>
> > >> Regards
> > >> Ignacio
> > >> SensoWave
> > >>
> > >> 2015-03-13 15:12 GMT+01:00 Krunoslav Hrnjak <krunoslav at yottabyte.hr>:
> > >> Dear sirs,
> > >>  I have changed region to Stockholm but unfortunately, now it is not
> possible to start new Instance. FiWare lab seems not usable.
> > >>
> > >> <Mail Attachment.png>
> > >>
> > >> Srdačno
> > >>
> > >> Krunoslav Hrnjak,
> > >> dipl. ing. el., univ. spec. oec., PMP,
> > >> stalni sudski vještak
> > >> za područje informatike,
> > >> elektrotehnike i telekomunikacija
> > >>
> > >> Zagrebačka 126,
> > >> HR-10410  Velika Gorica
> > >>
> > >> Krunoslav at yottabyte.HR
> > >> http://www.yottabyte.HR
> > >> 095/517-4201
> > >>
> > >>
> > >> Molim razmislite o okolišu prije ispisa
> > >>
> > >> On 10 March 2015 at 11:25, Krunoslav Hrnjak <krunoslav at yottabyte.hr>
> wrote:
> > >> Dear Sirs,
> > >>
> > >>  I have tried access FiWareLab and obtain only  ONE floating IP
> address several times. Unfortunatly, I get: "message": "NoMoreFloatingIps:
> Zero floating ips available.", is it possible for Finodex participants to
> get some more resources in Lab, and also to get static IP address,so we
> coud be able to map DNS like digmap-lab.yottabyte.hr to assigned IP
> address (or somebody could map IP adress to digmap.cloud.lab.fiware.org).
> > >>  At the moment it is not possible to try out how lab works.
> > >>
> > >> Srdačno, Krunoslav
> > >>
> > >>
> > >>
> > >> _______________________________________________
> > >> Fiware-finodex-coaching mailing list
> > >> Fiware-finodex-coaching at lists.fi-ware.org
> > >> https://lists.fi-ware.org/listinfo/fiware-finodex-coaching
> > >>
> > >>
> > >>
> > >>
> > >>
> > >> _______________________________________________
> > >> Fiware-finodex-coaching mailing list
> > >>
> > >> Fiware-finodex-coaching at lists.fi-ware.org
> > >> https://lists.fi-ware.org/listinfo/fiware-finodex-coaching
> > >
> > >
> > >
> <FI-Lab-Error-Hrnjak.pdf>_______________________________________________
> > > Fiware-lab-help mailing list
> > > Fiware-lab-help at lists.fi-ware.org
> > > https://lists.fi-ware.org/listinfo/fiware-lab-help
> >
> >
> >
>
> --
> --------------------------------------------------------
> Daniele Santoro,
> CREATE-NET Research Center
> ICT Area
> ITC/Research Engineer
> Via alla Cascata 56/D - 38100 Povo Trento (Italy)
> e-mail: daniele.santoro at create-net.org
> Tel: (+39) 0461 312430
> Fax: (+39) 0461 421157
> www.create-net.org
>
> PGP/GPG-KEY-ID: 0x08E3E8D5
> http://keyserver1.pgp.com/vkd/DownloadKey.event?keyid=0xCA854D8608E3E8D5
> --------------------------------------------------------
>
> The information transmitted is intended only for the person or entity to
> which it is addressed and may contain confidential and/or privileged
> material. Any review, retransmission, dissemination or other use of, or
> taking of any action in reliance upon, this information by persons or
> entities other than the intended recipient is prohibited according to the
> Italian Law 196/2003 of the Legislature. If you received this in error,
> please contact the sender and delete the material from any computer.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.fiware.org/private/fiware-lab-help/attachments/20150415/b52e55ee/attachment.html>