[Fiware-lab-help] FIWARE Lab Assistance

[Stefano Martinallo]

Thank you!​

*Stefano Martinallo*

Software Engineer @ Sherlock s.r.l.
email: stefano at sherlock.bike
mobile: +39 340 6162136
skype: steo.nallo
www.sherlock.bike

2015-08-13 10:51 GMT+02:00 Daniele Santoro <daniele.santoro at create-net.org>:

> Dear Stefano,
>
> Let me forward your request to the Trento node. They can give you detailed
> support on your issue.
>
> Best,
> Daniele
>
> On 12 Aug 2015, at 19:34, Stefano Martinallo <stefano at sherlock.bike>
> wrote:
>
> > Dear,
> >
> > by following the stack overflow guide did not allow me to make the VM
> visible on the internet and so I am not able to SSH the to the VM.
> >
> > As mentioned in the guide, I deployed the VM in the network
> 192.168.12.0/24, I set up the router and the interface but, when I try to
> associate the floating IP I get the 400 error reported below.
> >
> > {"badRequest": {"message": "Error. Unable to associate floating ip",
> "code": 400}}
> >
> > Could you please check my network configuration so as to resolve the
> issue asap?
> >
> > My FIWARE Lab user is stefano at sherlock.bike
> >
> >
> > Thank you in advance,
> >
> > Stefano Martinallo
> >
> > Software Engineer @ Sherlock s.r.l.
> > email: stefano at sherlock.bike
> > mobile: +39 340 6162136
> > skype: steo.nallo
> > www.sherlock.bike
> >
> > 2015-08-12 15:42 GMT+02:00 Stefano Martinallo <stefano at sherlock.bike>:
> > Dear,
> >
> > Yes, I am using the Trento node.
> >
> > I am following the guide on StacOverflow. In this regard, I have a
> question.
> > When creating the router I have to select an external network (gateway).
> Which gateway should I choose among:
> >       • public-ext-net-01
> >       • public-ext-net-02
> >       • public-ext-net-04
> >       • federation-ext-net-01
> > Regards,
> >
> > Stefano Martinallo
> >
> > Software Engineer @ Sherlock s.r.l.
> > email: stefano at sherlock.bike
> > mobile: +39 340 6162136
> > skype: steo.nallo
> > www.sherlock.bike
> >
> > 2015-08-12 15:00 GMT+02:00 Daniele Santoro <
> daniele.santoro at create-net.org>:
> > Dear,
> >
> > I assume you are using Trento node, where OpenStack neutron is enabled.
> You should try to configure a network for your instance following this
> tutorial:
> >
> >
> http://stackoverflow.com/questions/27543127/deploy-vm-in-fiware-lab-nodes-with-neutron
> >
> > Please let me know if you solve your problem, otherwise I will forward
> it to the Trento node support.
> >
> > Daniele
> >
> > On 12 Aug 2015, at 14:20, Stefano Martinallo <stefano at sherlock.bike>
> wrote:
> >
> > > Dear FIWARE Lab,
> > >
> > > I would like to SSH to my VM in the FIWARE Lab, however when following
> the "Connect using a SSH client" guide in the VM menu.
> > > The guide states: "ssh -i my_keypair.pem root at 193.205.211.117"
> > > However I get the timeout error when trying to SSH the VM. As a matter
> of information, even the ping fails.
> > >
> > > Below the LAB configuration:
> > >               • image: Ubuntu Server 14.04.1 (x64)
> > >               • security group: ssh
> > >                       • IP protocol: TCP
> > >                       • From port: 22
> > >                       • To port: 22
> > >                       • Source: 0.0.0.0/0 (CIDR)
> > >               • floating IP: 193.205.211.117 (associated with VM)
> > >               • network: node-int-net-02
> > >               • keypair: my_keypair.pem
> > > During the boot procedure I checked for OpenSSH server, and the server
> is up and running.
> > >
> > > I kindly ask you to provide me with some insights regarding such an
> issue (it may be due to a bad network configuration I performed).
> > >
> > > Best regards,
> > >
> > > Stefano Martinallo
> > >
> > > Software Engineer @ Sherlock s.r.l.
> > > email: stefano at sherlock.bike
> > > mobile: +39 340 6162136
> > > skype: steo.nallo
> > > www.sherlock.bike
> > > _______________________________________________
> > > Fiware-lab-help mailing list
> > > Fiware-lab-help at lists.fi-ware.org
> > > https://lists.fi-ware.org/listinfo/fiware-lab-help
> >
> >
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.fiware.org/private/fiware-lab-help/attachments/20150813/c2362c13/attachment.html>