Hi,
Please answer yes to the question below. This is the key of the server
side not the one belongs to you.
Please let me know if it helped.
Best,
Sandor
2015.02.06. 14:49 keltezéssel, Debastiani Andreis,Jose Henrique írta:
>
> Hi Sándor,
>
>
> I stil was not able to connect via ssh, the same error appeared:
>
>
> Joses-MacBook-Air-4:EUIrrigation ike$ ssh -i EUI_Budapest.pem
> ubuntu at 148.6.80.120
>
> The authenticity of host '148.6.80.120 (148.6.80.120)' can't be
> established.
>
> RSA key fingerprint is 3f:8d:48:da:c1:c3:99:f5:eb:6d:47:17:93:a8:a0:e3.
>
> Are you sure you want to continue connecting (yes/no)? no
>
> Host key verification failed.
>
>
>
> The finger print of my keypair starts with 9e:78:69...
>
> Would you know what could be the problem?
>
>
> Thanks,
>
> José
>
>
> ------------------------------------------------------------------------
> *From:* Sándor Laki <laki.sandor at wigner.mta.hu>
> *Sent:* Wednesday, February 4, 2015 4:50 AM
> *To:* Debastiani Andreis,Jose Henrique; fiware-lab-help at lists.fi-ware.org
> *Subject:* Re: [Fiware-lab-help] FIWARE Lab questions
> Hi José,
>
> We have just checked that you are using a standard ubuntu image, not a
> FIWARE-BASE-IMAGE. In this case, you should use the username ubuntu,
> with your key. The ubuntu user has sudo rights, so after that you can
> do anything you want...
>
> Sorry for that I forgot to mention it.
>
> Best,
> Sandor
>
> 2015.02.03. 17:00 keltezéssel, Debastiani Andreis,Jose Henrique írta:
>>
>> Thanks Sándor,
>>
>>
>> I could associate the IP using the Budapest region following your
>> instructions.
>>
>> I just could not connect to it via ssh. See below:
>>
>>
>> ssh -i EUI_Budapest.pem root at 148.6.80.120
>>
>> The authenticity of host '148.6.80.120 (148.6.80.120)' can't be
>> established.
>>
>> RSA key fingerprint is 3f:8d:.......
>>
>>
>> To connect to the vm we should use the floating IP right? In this
>> case 148.6.80.120
>>
>> I added a security group rule to TCP port 22 to 22 (Please, see image
>> attached). Am I missing something?
>>
>>
>> Here is my project name, username and instance ID for Berlin region:
>>
>>
>> EUIrrigationProject
>> <https://account.lab.fiware.org/applications/euirrigationproject>
>>
>> Jose Andreis - andreis at ufl.edu
>>
>> 0bc2c47c-8d7f-478e-a5fb-975cea24cd7f
>>
>>
>> Thank you very much for all the help.
>>
>>
>> José
>>
>>
>>
>> ------------------------------------------------------------------------
>> *From:* Sándor Laki <laki.sandor at wigner.mta.hu>
>> *Sent:* Tuesday, February 3, 2015 8:45 AM
>> *To:* Debastiani Andreis,Jose Henrique; fiware-lab-help at lists.fi-ware.org
>> *Subject:* Re: [Fiware-lab-help] FIWARE Lab questions
>> Dear José,
>>
>> I have just checked and in Budapest region operated by me and my
>> colleagues, all the functionalities mentioned below are working
>> properly. In our region, you should use publicInternal network during
>> VM creation. After that you can assign a floating IP from the
>> publicRange to this interface. (similarly floating IP from
>> mdvpnRange can only be assigned to nic from mdvpnInternal. Note that
>> we will change to a newer version of openstack soon, where it will be
>> more easier, but now this is the case.)
>>
>> However, I forward your issue to the support team of Berlin node so
>> that they could investigate the problem with their site.
>> For that I would kindly ask you to send me (cc-d to the list), the
>> project name (username) used in the cloud portal, and the instance id
>> of the vm, where the problem was experienced.
>>
>> Thanks in advance!
>>
>> Best regards,
>> Sandor
>> -- on behalf of FIWARE level-1 support team
>> --
>> Sándor Laki
>> EU FP7 FI-PPP XIFI project,
>> Wigner Research Centre for Physics,
>> Hungarian Academy of Sciences
>> Konkoly Thege Miklós út 29-33.
>> H-1121, Budapest, Hungary
>> Cell: +36 70 374 2646
>> Skype: sandor.laki
>>
>> XIFI:https://fi-xifi.eu/home.html
>> FI-PPP:http://www.fi-ppp.eu/
>>
>>
>> 2015.02.03. 14:03 keltezéssel, Debastiani Andreis,Jose Henrique írta:
>>>
>>> Hi Sandor.
>>>
>>>
>>> Thank you for your answers.
>>>
>>> I tried the same procedure in all regions available on the portal.
>>> Currently I am trying the Berlin region. Please note that I am not
>>> located in EU although other project members are (Would this be
>>> related to the floating IP association problem?). I am using Mac Os
>>> and Google Chrome as browser.
>>>
>>>
>>>
>>> Thank you,
>>>
>>>
>>> José
>>>
>>>
>>> ------------------------------------------------------------------------
>>> *From:* Sándor Laki <laki.sandor at wigner.mta.hu>
>>> *Sent:* Tuesday, February 3, 2015 3:39 AM
>>> *To:* Debastiani Andreis,Jose Henrique;
>>> fiware-lab-help at lists.fi-ware.org
>>> *Subject:* Re: [Fiware-lab-help] FIWARE Lab questions
>>> Dear José,
>>>
>>> My answers to your questions:
>>> 1. This is not a normal behaviour. Could you please send me which
>>> region you use? We can move forward only after that.
>>> 2. The images used in FIWARE can be accessed via ssh with your
>>> private key assigned to the vm. However, after that you have root
>>> access within the vm, so you can configure username, password
>>> authentication as well.
>>> 3. I assume that in the base images it is not the case. They only
>>> provide a base system where you can freely decide what to install.
>>> However, to deploy the necessary software stack the blueprint
>>> templates can be used. To do so, first you have to create a
>>> blueprint template by choosing the region, base os, and the
>>> softwares to be installed. After that you can deploy it, resulting
>>> in a new instance with all the required softwares. Note that this
>>> instantiation generally takes much more time than a simple image
>>> deployment.
>>> 4. See 3.
>>> 5. If apache, php and mysql are also installed, I expect that the
>>> answer is yes. If not, you can install it manually within the vm,
>>> using aptitude or apt-get in ubuntu.
>>> 6. Free space is assigned to each vm, but it is not shown in the
>>> portal. However, if the space is not enough, you can create
>>> additional volumes in the portal, an assign them to the vm instance.
>>> After that a new disk appears in the vm (e.g. /dev/vdb), that can be
>>> formatted and then mounted similarly to a real physical disk.
>>>
>>> I also advise you to check the videos on instances and blueprints at
>>> http://help.lab.fiware.org/
>>> And the edu pages on Cloud hosting:
>>> http://edu.fi-ware.org/course/category.php?id=4
>>> Blueprint templetes are introduced at
>>> http://edu.fi-ware.org/course/view.php?id=48
>>>
>>> I hope this helps you.
>>> Best regards,
>>> Sandor
>>>
>>> 2015.02.02. 19:39 keltezéssel, Debastiani Andreis,Jose Henrique írta:
>>>>
>>>> Hi,
>>>>
>>>>
>>>> My name is José Andreis and I am part of a team that is applying
>>>> for a call to develop agriculture related applications using the
>>>> FIWARE platform. We have faced some small problems while trying to
>>>> configure a cloud server in the FIWARE platform and I would like to
>>>> know if you could help us with the following questions:
>>>>
>>>>
>>>> 1 - In the Cloud section of FIWARE Lab. I was able to create a
>>>> keypair, start an instance (Ubuntu server v14), add security group
>>>> rules to TCP port 22 and allocating a floating IP. But I was never
>>>> able to associate this IP to the instance so I could connect to the
>>>> server via ssh using the PEM file generated. I tried creating the
>>>> instance in several different regions and the problem happened with
>>>> all. The error below is presented:
>>>> {"badRequest": {"message": "Error. Unable to associate floating
>>>> ip", "code": 400}}
>>>> 2 - I believe that if I am able to associate the IP to the instance
>>>> (issue above). I will be able to connect to the server via SSH with
>>>> no more problems. My second question is if I will be able to access
>>>> the server files using an FTP/SSH client like CyberDuck or
>>>> FileZilla to upload or edit files/scripts in the server? Generally
>>>> I would need an username and password for these clients, so I
>>>> wonder if there’s a place in the FIWARE lab were we can create
>>>> these credentials?
>>>> 3 - Is php already installed in the Ubuntu server v14 instance?
>>>> 4 - With the ubuntu instance. Will we be able to create a blueprint
>>>> template for Mysql?
>>>> 5 - Is there an option for phpmyadmin interface for database
>>>> (MySql) administration? If not, what is the interface for the
>>>> database administration?
>>>>
>>>> 6 - I assume that it will not be a problem. But just to clarify.
>>>> Will the CRONTAB program be accessible via terminal for the ubuntu
>>>> template?
>>>> 7 - When creating an instance. I noticed that we never have Disk
>>>> space available (NaN GB available). Is there an option where we can
>>>> allocate disk space for our account?
>>>>
>>>>
>>>>
>>>> Thank you very much for your attention.
>>>>
>>>>
>>>>
>>>> José
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Fiware-lab-help mailing list
>>>> Fiware-lab-help at lists.fi-ware.org
>>>> https://lists.fi-ware.org/listinfo/fiware-lab-help
>>>
>>>
>>> --
>>> Sándor Laki
>>> EU FP7 FI-PPP XIFI project,
>>> Wigner Research Centre for Physics,
>>> Hungarian Academy of Sciences
>>> Konkoly Thege Miklós út 29-33.
>>> H-1121, Budapest, Hungary
>>> Cell: +36 70 374 2646
>>> Skype: sandor.laki
>>>
>>> XIFI:https://fi-xifi.eu/home.html
>>> FI-PPP:http://www.fi-ppp.eu/
>>
>>
>> --
>> Sándor Laki
>> EU FP7 FI-PPP XIFI project,
>> Wigner Research Centre for Physics,
>> Hungarian Academy of Sciences
>> Konkoly Thege Miklós út 29-33.
>> H-1121, Budapest, Hungary
>> Cell: +36 70 374 2646
>> Skype: sandor.laki
>>
>> XIFI:https://fi-xifi.eu/home.html
>> FI-PPP:http://www.fi-ppp.eu/
>
>
> --
> Sándor Laki
> EU FP7 FI-PPP XIFI project,
> Wigner Research Centre for Physics,
> Hungarian Academy of Sciences
> Konkoly Thege Miklós út 29-33.
> H-1121, Budapest, Hungary
> Cell: +36 70 374 2646
> Skype: sandor.laki
>
> XIFI:https://fi-xifi.eu/home.html
> FI-PPP:http://www.fi-ppp.eu/
--
Sándor Laki
EU FP7 FI-PPP XIFI project,
Wigner Research Centre for Physics,
Hungarian Academy of Sciences
Konkoly Thege Miklós út 29-33.
H-1121, Budapest, Hungary
Cell: +36 70 374 2646
Skype: sandor.laki
XIFI: https://fi-xifi.eu/home.html
FI-PPP: http://www.fi-ppp.eu/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.fiware.org/private/fiware-lab-help/attachments/20150206/555e1df8/attachment.html>
You can get more information about our cookies and privacy policies clicking on the following links: Privacy policy Cookies policy