[Fiware-lab-help] FI-Lab Assistance

[Elin Hjorth]

Hi again, 
I redid the whole thing, not sure I did anything differently, but now it works just fine! 
Thank you for your help :) 

Regards, 
Elin 



Från: "Sándor Laki" <laki.sandor at wigner.mta.hu> 
Till: "Elin Hjorth" <elin.hjorth at dataductus.se>, "fiware-lab-help" <fiware-lab-help at lists.fi-ware.org> 
Kopia: "gombos" <gombos.gergo at wigner.mta.hu> 
Skickat: torsdag, 22 jan 2015 19:48:35 
Ämne: Re: [Fiware-lab-help] FI-Lab Assistance 

Hi Elin, 

I rebooted you instance, and checked that your rsa key was installed properly in the vm (see the screeshot). I suggest that you should try to ssh to it one more time, and if it does not allow you to access the vm, try to regenerate your private key from the pem, or. create another vm with a different key. Unfortunately, the portal does not allow you to download the private key later, (actually it is not stored by us after you downloaded). 



Best, 
Sandor 

2015.01.22. 17:31 keltezéssel, Elin Hjorth írta: 



Hi again,
Our username is tommy-bloom. I'm afraid it still doesn't work. 

I'm using root to log on, with the private key I genarated in putty using the pem file from fi-lab.

Is there a way to download the key from fi-lab again? Or should I just redo the whole initialisation process?

Regards
Elin

----- Ursprungligt meddelande -----
Från: "Sándor Laki" <laki.sandor at wigner.mta.hu> Till: "Elin Hjorth" <elin.hjorth at dataductus.se> , "gombos" <gombos.gergo at wigner.mta.hu> Kopia: "fiware-lab-help" <fiware-lab-help at lists.fi-ware.org> Skickat: onsdag, 21 jan 2015 14:27:09
Ämne: Re: [Fiware-lab-help] FI-Lab Assistance

Hello Elin,

What is the user name do you use? I have just checked the iotbroker 
image, and it works fine for me. Use the username root (you can set 
under Connection/Data/Auto login username in putty), and the ppk file as 
private key (Connection/SSH/Auth->Private key file for authentication) 
in putty.

Please let us know if the problem is still there.

Best regards,
Sandor

2015.01.21. 11:36 keltezéssel, Elin Hjorth írta: 

BQ_BEGIN

Hi
Ok, that explains it. Yes, I will use only the public network in the future.

The vm I'm trying to connect to is called IoTBroker3 and has id cb8d3b47-9cde-4885-a9a0-b38095b1e408

Regards,
Elin

----- Ursprungligt meddelande -----
Från: "gombos" <gombos.gergo at wigner.mta.hu> Till: "Elin Hjorth" <elin.hjorth at dataductus.se> , "fiware-lab-help" <fiware-lab-help at lists.fi-ware.org> Skickat: onsdag, 21 jan 2015 11:23:38
Ämne: Re: [Fiware-lab-help] FI-Lab Assistance

Dear Elin,

yes, when you use two network interface the VM cannot associate the
floating IP to the VM, because some image does not configure both
network card and public floating IP cannot set for mdvpn net and
inversly. The mdvpn is a interregion network. If it is not necessary,
use the publicNet.

What is youre VM name, or Id? We will check what is a problem with the
connection.

ps, please use the 'Answer all', and send the mail to the
fiware-lab-help too, because my college will not see your email.

Regards,
Gergő


2015-01-20 15:42 időpontban Elin Hjorth ezt írta: 

BQ_BEGIN

Hi
Actually, I just got it to work!
I had activated both publicInternal and mdvpnInternal on the vm. I
then created a ip in the publicRange.
As I tried to associate this public ip to the vm, I got an error
message.
I now tried to make a vm with only the public network, and now it
worked to assign it the public ip.

Although a new problem has occured. I can't connect to it.I
downloaded the key.pem and generated a private key .ppk.
But I'm getting "Server refused our key" as I try to log on as root
with my key and password.
Shouldn't I use root? Or have I missed anything?

Regards,
Elin



----- Ursprungligt meddelande -----
Från: "gombos" <gombos.gergo at wigner.mta.hu> Till: "Elin Hjorth" <elin.hjorth at dataductus.se> Kopia: "fiware-lab-help" <fiware-lab-help at lists.fi-ware.org> Skickat: tisdag, 20 jan 2015 14:34:29
Ämne: Re: [Fiware-lab-help] FI-Lab Assistance

Dear Elin,

I need to some infomration about the error. What is the error that
you
got? Which network do you use on the VM? Which floating IP pool do
you
use?

Dear,
Gergő

2015-01-20 13:39 időpontban Elin Hjorth ezt írta: 

BQ_BEGIN

Hi

Our project is trying to set up a new instance in fi-lab. We have
previously been in Spain region but switched to Budapest due to the
lack of resources in Spain.

We have set up an instance but fail to associate a public ip with
the
instance. We need it to be public since we have an instance in Spain
that we want to communicate with.
Is there any known problem regarding this in the Budapest region? Or
what could cause it otherwise?

Regards

Elin 



BQ_END

_______________________________________________
Fiware-lab-help mailing list Fiware-lab-help at lists.fi-ware.org https://lists.fi-ware.org/listinfo/fiware-lab-help 

BQ_END


BQ_END


-- 
Sándor Laki
EU FP7 FI-PPP XIFI project,
Wigner Research Centre for Physics, 
Hungarian Academy of Sciences
Konkoly Thege Miklós út 29-33.
H-1121, Budapest, Hungary
Cell: +36 70 374 2646
Skype: sandor.laki

XIFI: https://fi-xifi.eu/home.html FI-PPP: http://www.fi-ppp.eu/ 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.fiware.org/private/fiware-lab-help/attachments/20150123/b52d2126/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dhebfagj.png
Type: image/png
Size: 22369 bytes
Desc: not available
URL: <https://lists.fiware.org/private/fiware-lab-help/attachments/20150123/b52d2126/attachment.png>