Hello Marco,
I tried again to set up a Volume
Region: Zuerich
Instance ID: 7c13e4a2-07a5-4f9f-b9f7-24bfaa117ee0
Tenent ID: (ID 00000000000000000000000000005340)
Following problem: When I try to attach an Instance to a volume the
'spinner' hang
after reloading the site, there is the volume with attachment.#
If I want to delete the volume, the link doesn't work too
COMMAND LINE OUTPUT:
[root at oriontest /]# ifconfig eth0
eth0 Link encap:Ethernet HWaddr FA:16:3E:23:54:A5
inet addr:10.0.5.30 Bcast:10.0.15.255 Mask:255.255.240.0
inet6 addr: fe80::f816:3eff:fe23:54a5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:50937184 errors:0 dropped:0 overruns:0 frame:0
TX packets:2117679 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4600964028 (4.2 GiB) TX bytes:342459379 (326.5 MiB)
[root at oriontest /]# sudo fdisk -l
Disk /dev/vda: 10.7 GB, 10737418240 bytes
181 heads, 40 sectors/track, 2896 cylinders
Units = cylinders of 7240 * 512 = 3706880 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000c897f
Device Boot Start End Blocks Id System
/dev/vda1 * 1 1449 5241856 83 Linux
/dev/vda2 1449 2896 5240640 83 Linux
Disk /dev/vdb: 21.5 GB, 21474836480 bytes
16 heads, 63 sectors/track, 41610 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
[root at oriontest /]# sudo fdisk /dev/vdb/
Unable to open /dev/vdb/
Is this a security issue - no authorisation to do so?
Next I tried was to follow the video: "http://help.lab.fiware.org/" =>
Blueprints
Creating a template => works
Add Tiers => works
Lunch Instance => don't work
ERROR:
Error: Infrastructure error Error creating server: {"overLimit": {"message":
"Quota exceeded for instances: Requested 1, but already used 3 of 3
instances", "code": 413, "retryAfter": "0"}}
Am I limited to 3 instances? Where is this set up?
How can I change it?
Upadeting the tier instance numbers gives followinh ERROR:
Error updating tier tiertest. Cause: 403 Error
{"message":"The environment is being used by an
instance#1fsyprgn256qp4oleia81pt10","code":40}
The Instance descript in the ERROR hint isn't one I have deployed.
I have:
* Name: MyUbuntu
* ID: 7c13e4a2-07a5-4f9f-b9f7-24bfaa117ee0
* Status: ACTIVE
* Name: POI Instance
* ID: 31da95f3-6cc1-4e52-b887-a3d9a347d913
* Status: ACTIVE
* Name: zuerich-SSD
* ID: 80330cfc-e73b-4910-9e6c-305236dff6ec
* Status: ACTIVE
Where do I get further hints to the error messages?
Please provide us with an ERROR Database and hints to solve such problems.
An Update of the help videos would be good too, they are mostly made on
older versions.
It would be also good, if there would be a source of help files/videos/
slides ordered by version of FI-WARE and / GE's.
It's annoying to run into errors caused by wrong/old tutorials.
Going to try another tutorial......
Thanks
Have Fun
TimE
_____
Von: Cipriani Marco [mailto:marco2.cipriani at telecomitalia.it]
Gesendet: Montag, 16. März 2015 17:07
An: tim at vogelflug.de
Cc: fiware-lab-help at lists.fi-ware.org
Betreff: R: [Fiware-lab-help] (no subject)
Dear Tim,
I would suggest to try again. In this case, if you will experience yet some
issue, let us know which region you are using (if Zurich or a different
one).
You keep in mind that most of part of regions provide Floating IPs only on
request (apart from Spain that temporarily has run out of the resources).
About the tenant ID (or Project ID), you can find it selecting your project
name: look at the info bar at the bottom of the page, something like
<project-name> (ID 00000000000000000000000000000xyz).
Please, in the future, keep the list fiware-lab-help at lists.fi-ware.org in
CC: this is essential to properly handle your help request through our
trouble ticketing system.
Best regards
Marco
Da: Timothy Martin [mailto:easyscreen.pt at gmail.com]
Inviato: lunedì 16 marzo 2015 14:56
A: Cipriani Marco
Oggetto: AW: [Fiware-lab-help] (no subject)
Hello Marco,
here the instance ID: 7c13e4a2-07a5-4f9f-b9f7-24bfaa117ee0
I don't know where to find the tenant ID The region I use is Zuerich
It might be that the error rise while I was trying to use Cypras as region (
spain2 didn't provide public IP's anymore)
And that the instance I used was: ID: 80330cfc-e73b-4910-9e6c-305236dff6ec
Should I try again to let the error rise up again?
Let me know.
Tim
P.S. I used this email address, because the IP of my other seems to blocked
for some reasons.
please anwser to : <mailto:tim at vogelflug.de> tim at vogelflug.de and cc to
this one.
Questo messaggio e i suoi allegati sono indirizzati esclusivamente alle
persone indicate. La diffusione, copia o qualsiasi altra azione derivante
dalla conoscenza di queste informazioni sono rigorosamente vietate. Qualora
abbiate ricevuto questo documento per errore siete cortesemente pregati di
darne immediata comunicazione al mittente e di provvedere alla sua
distruzione, Grazie.
This e-mail and any attachments is confidential and may contain privileged
information intended for the addressee(s) only. Dissemination, copying,
printing or use by anybody else is unauthorised. If you are not the intended
recipient, please delete this message and any attachments and advise the
sender by return e-mail, Thanks.
rispetta l'ambienteRispetta l'ambiente. Non stampare questa mail se non è
necessario.
---
Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
http://www.avast.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.fiware.org/private/fiware-lab-help/attachments/20150319/d74e5834/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 677 bytes
Desc: not available
URL: <https://lists.fiware.org/private/fiware-lab-help/attachments/20150319/d74e5834/attachment.gif>
You can get more information about our cookies and privacy policies clicking on the following links: Privacy policy Cookies policy