[Fiware-lab-help] [Fiware-finodex-coaching] FiWareLab resources

[Krunoslav Hrnjak]

Dear Mr. Santoro,
 I don't have a preference for region, I have tried out several region
Czeck, Spain and Stochlom but till now with no sucess in setting up a
running VM.  Seems like rather easy task, setup an image, open ports,
generate keys alocate and associate IP, and usually this takes about ten
minutes, but until now I had no luck, there is always some kind of error.

Kind regards

Srdačno

Krunoslav Hrnjak,
dipl. ing. el., univ. spec. oec., PMP,
stalni sudski vještak
za područje informatike,
elektrotehnike i telekomunikacija

Zagrebačka 126,
HR-10410  Velika Gorica

Krunoslav at yottabyte.HR
http://www.yottabyte.HR <http://www.yottabyte.hr/>
095/517-4201

Molim razmislite o okolišu prije ispisa

On 31 March 2015 at 15:41, Daniele Santoro <daniele.santoro at create-net.org>
wrote:

> Dear,
>
> Can you please tell me which region you want to use ?
>
>
> Public IPs are precious resources that are sometimes not freed-up from
> users. For this reason you should find the region on which there are free
> IP in the pool.
> If you want I’ve just deallocated a public IP from Berlin node, you can
> try to book it.
>
> Daniele
>
> On 31 Mar 2015, at 14:05, Krunoslav Hrnjak <krunoslav at yottabyte.hr> wrote:
>
> > Dear sirs,
> >  as mr. Vitale suggested I have attached error message and information
> about VM I am using. Please help. I can not assing public IP to my VM.
> >
> > Error message:
> > undefined. Cause: 400 Error
> >
> > {"badRequest": {"message": "Error. Unable to associate floating ip",
> "code": 400}}
> >
> >
> >
> > Find details in atacched document.
> >
> >
> >
> >
> > Srdačno
> >
> > Krunoslav Hrnjak,
> > dipl. ing. el., univ. spec. oec., PMP,
> > stalni sudski vještak
> > za područje informatike,
> > elektrotehnike i telekomunikacija
> >
> > Zagrebačka 126,
> > HR-10410  Velika Gorica
> >
> > Krunoslav at yottabyte.HR
> > http://www.yottabyte.HR
> > 095/517-4201
> >
> >
> > Molim razmislite o okolišu prije ispisa
> >
> > On 31 March 2015 at 11:01, Pasquale Vitale <pvitale at eng.it> wrote:
> > Hi,
> > please send a mail to fiware-lab-help at lists.fi-ware.org including your
> ID, the VM you want to assign the IP and so on.
> >
> > Pasquale
> >
> >
> > Il 31/03/2015 10:14, Krunoslav Hrnjak ha scritto:
> >> Dear all,
> >>  I have spent several hours trying to setup a virtual machine on FI
> Lab. Unfortunately still no success with assignment of IP to the host. I
> have quite some experience with different VPS hosting and basicy it seems
> rather simple task to setup Linux virtual machine but it is impossible to
> make it in FI lab. I already have a demo of my application
> http://digmap-lab.yottabyte.hr/DigMap/ and I would like to set it up in
> FI lab using FiWare GE's. Please give me some advice or help. Is it
> possible to take some resources and dedicate those resources to Finodex
> participants?
> >>
> >> Kind regard, Krunoslav
> >>
> >> Srdačno
> >>
> >> Krunoslav Hrnjak,
> >> dipl. ing. el., univ. spec. oec., PMP,
> >> stalni sudski vještak
> >> za područje informatike,
> >> elektrotehnike i telekomunikacija
> >>
> >> Zagrebačka 126,
> >> HR-10410  Velika Gorica
> >>
> >> Krunoslav at yottabyte.HR
> >> http://www.yottabyte.HR
> >> 095/517-4201
> >>
> >>
> >> Molim razmislite o okolišu prije ispisa
> >>
> >> On 13 March 2015 at 16:59, Ignacio Gomez Maqueda <
> imaqueda at sensowave.com> wrote:
> >> Dear sirs,
> >>
> >> Following with Krunoslav comments, we are also experiencing problems
> with fiware labs. We have a floating ip (in Zurich and in Spain2 region),
> but from time to time it stops to work and it starts to work again later
> and so on. Is there any way to have a stable environment?
> >>
> >> Regards
> >> Ignacio
> >> SensoWave
> >>
> >> 2015-03-13 15:12 GMT+01:00 Krunoslav Hrnjak <krunoslav at yottabyte.hr>:
> >> Dear sirs,
> >>  I have changed region to Stockholm but unfortunately, now it is not
> possible to start new Instance. FiWare lab seems not usable.
> >>
> >> <Mail Attachment.png>
> >>
> >> Srdačno
> >>
> >> Krunoslav Hrnjak,
> >> dipl. ing. el., univ. spec. oec., PMP,
> >> stalni sudski vještak
> >> za područje informatike,
> >> elektrotehnike i telekomunikacija
> >>
> >> Zagrebačka 126,
> >> HR-10410  Velika Gorica
> >>
> >> Krunoslav at yottabyte.HR
> >> http://www.yottabyte.HR
> >> 095/517-4201
> >>
> >>
> >> Molim razmislite o okolišu prije ispisa
> >>
> >> On 10 March 2015 at 11:25, Krunoslav Hrnjak <krunoslav at yottabyte.hr>
> wrote:
> >> Dear Sirs,
> >>
> >>  I have tried access FiWareLab and obtain only  ONE floating IP address
> several times. Unfortunatly, I get: "message": "NoMoreFloatingIps: Zero
> floating ips available.", is it possible for Finodex participants to get
> some more resources in Lab, and also to get static IP address,so we coud be
> able to map DNS like digmap-lab.yottabyte.hr to assigned IP address (or
> somebody could map IP adress to digmap.cloud.lab.fiware.org).
> >>  At the moment it is not possible to try out how lab works.
> >>
> >> Srdačno, Krunoslav
> >>
> >>
> >>
> >> _______________________________________________
> >> Fiware-finodex-coaching mailing list
> >> Fiware-finodex-coaching at lists.fi-ware.org
> >> https://lists.fi-ware.org/listinfo/fiware-finodex-coaching
> >>
> >>
> >>
> >>
> >>
> >> _______________________________________________
> >> Fiware-finodex-coaching mailing list
> >>
> >> Fiware-finodex-coaching at lists.fi-ware.org
> >> https://lists.fi-ware.org/listinfo/fiware-finodex-coaching
> >
> >
> > <FI-Lab-Error-Hrnjak.pdf>_______________________________________________
> > Fiware-lab-help mailing list
> > Fiware-lab-help at lists.fi-ware.org
> > https://lists.fi-ware.org/listinfo/fiware-lab-help
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.fiware.org/private/fiware-lab-help/attachments/20150331/9fb5a651/attachment.html>