[Fiware-lab-help] Can't access VM from outside

[László Márai]

  Dear Marco,

Well, this is pretty unfortunate. I wonder whoever thought it was a good
idea to launch an email just 36 hours before finally destroying the users'
data, basically leaving a single work day to move things around. (Also,
with such an innocent an unsuggesting subject line and the threat buried in
a huge gob of text.)

Whatever, I didn't have a lot to lose, so it's just some feedback you can
forward to whomever it may concern. (As far as I understand, this is the
exact reason for the CEED Tech programme, we're participating in.)

Now the problem is, that my status might have been downgraded from being a
community member, because I got access to the Budapest region (as well as
the others) but know I don't. The resources I get in the Spain2 region are
less, than what I had earlier.

Another problem is, that I'm still wrestling with the original issue. But
this time I'm not able to create a new subnet in the network I've created,
because whatever I come up with gets rejected with the error:
{"NeutronError": {"message": "Invalid input for operation: Requested subnet
with cidr: 10.0.0.0/8 for network: bc8e492b-c014-40f9-b32a-9114abd4c05a
overlaps with another subnet.", "type": "InvalidInput", "detail": ""}}

I don't see any networks that overlap with this one defined in the networks
section.

BTW, one more thing, I get constantly kicked out and re-authenticated
through account.lab.fiware.org (which is down at the moment), but I guess
you are already aware of this.

  Thanks for your time & help,
    Laszlo

On Thu, May 7, 2015 at 5:24 PM, Cipriani Marco <
marco2.cipriani at telecomitalia.it> wrote:

>  Dear Laszlo,
>
> about the password issue, as reported in the mail sent to all users to
> remind the installation of the new Idm component (scheduled for today), “*during
> the deployment of the new IdM GE, we have to reset all the user passwords.
> So please, in order to continue using your account, you have to use the
> “Forgot password*” option in the log in page of the FIWARE Lab Account
> Portal".
>
>
>
> About the other points, the same mail sent to the FIWARE users said:
>
> “*On the official FIWARE Lab cloud environment based on the new IdM GE
> deployed on May 7th, only the "default" organization linked to a given
> FIWARE account will be visible as "projects" (i.e., tenants) in the cloud
> environment.  Organizations created through the Account Portal of the
> FIWARE Lab will not be mapped into "projects" in the cloud of the FIWARE
> Lab.   The name of the default organization linked to your account will be
> "<your username> cloud" (for instance “user1 cloud") although you will be
> able to modify it.   Take into account that other organizations will not be
> mapped to "projects" on the Cloud Portal anymore and, in their case, this
> will mean that the associated resources will be lost.   Therefore, VERY
> IMPORTANT, you should migrate all the cloud resources (VMs, etc) you may
> have defined linked to organizations different than the organization linked
> as default to your account and do it before May 7 (name of the default
> organization linked to your account should currently map to your account
> user name).  After that date, FIWARE Lab providers will not be responsible
> for the loss of any data*.”
>
>
>
> So, it seems exactly the behavior that you are experiencing.
>
> I’m very sorry for the inconvenience.
>
>
>
> Best regards
>
> Marco
>
>
>
>
>
>
>
> *Da:* atleta at atleta.hu [mailto:atleta at atleta.hu] *Per conto di *László
> Márai
> *Inviato:* giovedì 7 maggio 2015 16:37
> *A:* Cipriani Marco
> *Cc:* fiware-lab-help
> *Oggetto:* Re: [Fiware-lab-help] Can't access VM from outside
>
>
>
>   Hi Marco,
>
> Something really strange happened. When trying to log in to my account to
> get my project ID, the website was asking for a password again (I should
> have had a valid session). Then it didn't accept my password (the
> password was saved in both the browser and my password manager, so no way I
> have 'forgotten it'). Then after changing my password and logging in it
> asked in I authorize the cloud application (which I have used before), then
> I'm not seeing my instances and the only region I see is Spain2. Also, I
> can't see our organization (PsychAsk) I created before (like months ago).
> Now I'm only member of a project that is the same as my name ( project
> laszlo-marai cloud (ID 00000000000000000000000000009481)  ). I don't know
> what it is, but it doesn't look right.
>
>   Thanks for your help,
>
>     Laszlo
>
>
>
> On Thu, May 7, 2015 at 4:11 PM, Cipriani Marco <
> marco2.cipriani at telecomitalia.it> wrote:
>
> Dear Laszlo,
>
> please could you provide us your project ID (your email account is not
> enough)?  It can be found selecting your project name and looking at the
> info bar in the bottom of the page, something like <project-name> (ID
> 00000000000000000000000000000xyz).
>
>
>
> Meanwhile, I will forward your request to the Budapest support team.
>
>
>
> Best regards
>
> Marco
>
>
>
>
>
> *Da:* fiware-lab-help-bounces at lists.fi-ware.org [mailto:
> fiware-lab-help-bounces at lists.fi-ware.org] *Per conto di *László Márai
> *Inviato:* giovedì 7 maggio 2015 15:51
> *A:* fiware-lab-help
> *Oggetto:* [Fiware-lab-help] Can't access VM from outside
>
>
>
>    Hi,
>
>
> I've created a few VM instances on the Budapest node and access them from
> the outside (tried to do so in other regions as well, with less success)
> without any luck. Here's what I did:
>
> 1., created a security group with port 22 open (among others)
>
> 2., launched an instance using one of the images, adding it to the above
> security group
>
> 3., associated a floating IP to one of the internal interfaces (tried both
> 10.10.xxx and 10.20.xxx)
>
> 4., tried to connect from my machine, and received a "no route to host"
> error
>
> I also tried setting up my own network (it's not clear whether it's
> necessary or not):
>
> 1., create a new network (192.168.x.x/24)
>
> 2., create a router and set the external network to the one that contains
> my public IP ( public-ext-net-01)
>
> 3., launch a new VM instance and the network created in step 1 to it
>
> 4., associate floating IP
>
> 5., try to ssh -> no route to host
>
> My filab user id is the same as I'm sending this email from (I don't know
> if it's a requirement for getting a feedback for the reports or not).
>
>
>
>   Thanks,
>
>     Laszlo
>        Questo messaggio e i suoi allegati sono indirizzati esclusivamente
> alle persone indicate. La diffusione, copia o qualsiasi altra azione
> derivante dalla conoscenza di queste informazioni sono rigorosamente
> vietate. Qualora abbiate ricevuto questo documento per errore siete
> cortesemente pregati di darne immediata comunicazione al mittente e di
> provvedere alla sua distruzione, Grazie.
>
> *This e-mail and any attachments** is **confidential and may contain
> privileged information intended for the addressee(s) only. Dissemination,
> copying, printing or use by anybody else is unauthorised. If you are not
> the intended recipient, please delete this message and any attachments and
> advise the sender by return e-mail, Thanks.*
> *[image: rispetta l'ambiente]Rispetta l'ambiente. Non stampare questa mail
> se non è necessario.*
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.fiware.org/private/fiware-lab-help/attachments/20150507/562bca4d/attachment.html>