[Fiware-lab-help] Can't access VM from outside

[Sándor Laki]

Dear Laszlo,

A comment: If you are going to use the Budapest region, please choose 
"Budapest2" which is our new environment. All the VMs from the old 
Budapest region will be moved to this one after IdM is back again.

Best regards,
Sandor

2015.05.07. 20:05 keltezéssel, László Márai írta:
>   Dear Marco,
>
> Thanks again. How does one know that the configuration has been 
> successfully finished and it's not a waste of time to try using the 
> platform and reporting the issues?
>
>   Regards,
>     Laszlo
>
> On Thu, May 7, 2015 at 7:34 PM, Cipriani Marco 
> <marco2.cipriani at telecomitalia.it 
> <mailto:marco2.cipriani at telecomitalia.it>> wrote:
>
>     Dear Laszlo,
>
>     there is again some problem on FIWARE platform: the installation
>     and configuration of the new Idm component is still on-going. As
>     soon as the installation will be complete, your problems should be
>     resolved.
>
>     Anyway I have just forwarded your request to the second level
>     helpdesk.
>
>     Best regards
>
>     Marco
>
>     *Da:*atleta at atleta.hu <mailto:atleta at atleta.hu>
>     [mailto:atleta at atleta.hu <mailto:atleta at atleta.hu>] *Per conto di
>     *László Márai
>     *Inviato:* giovedì 7 maggio 2015 17:56
>
>
>     *A:* Cipriani Marco
>     *Cc:* fiware-lab-help
>     *Oggetto:* Re: [Fiware-lab-help] Can't access VM from outside
>
>     Dear Marco,
>
>     Well, this is pretty unfortunate. I wonder whoever thought it was
>     a good idea to launch an email just 36 hours before finally
>     destroying the users' data, basically leaving a single work day to
>     move things around. (Also, with such an innocent an unsuggesting
>     subject line and the threat buried in a huge gob of text.)
>
>     Whatever, I didn't have a lot to lose, so it's just some feedback
>     you can forward to whomever it may concern. (As far as I
>     understand, this is the exact reason for the CEED Tech programme,
>     we're participating in.)
>
>     Now the problem is, that my status might have been downgraded from
>     being a community member, because I got access to the Budapest
>     region (as well as the others) but know I don't. The resources I
>     get in the Spain2 region are less, than what I had earlier.
>
>     Another problem is, that I'm still wrestling with the original
>     issue. But this time I'm not able to create a new subnet in the
>     network I've created, because whatever I come up with gets
>     rejected with the error: {"NeutronError": {"message": "Invalid
>     input for operation: Requested subnet with cidr: 10.0.0.0/8
>     <http://10.0.0.0/8> for network:
>     bc8e492b-c014-40f9-b32a-9114abd4c05a overlaps with another
>     subnet.", "type": "InvalidInput", "detail": ""}}
>
>     I don't see any networks that overlap with this one defined in the
>     networks section.
>
>     BTW, one more thing, I get constantly kicked out and
>     re-authenticated through account.lab.fiware.org
>     <http://account.lab.fiware.org> (which is down at the moment), but
>     I guess you are already aware of this.
>
>       Thanks for your time & help,
>
>         Laszlo
>
>     On Thu, May 7, 2015 at 5:24 PM, Cipriani Marco
>     <marco2.cipriani at telecomitalia.it
>     <mailto:marco2.cipriani at telecomitalia.it>> wrote:
>
>     Dear Laszlo,
>
>     about the password issue, as reported in the mail sent to all
>     users to remind the installation of the new Idm component
>     (scheduled for today), “/during the deployment of the new IdM GE,
>     we have to reset all the user passwords. So please, in order to
>     continue using your account, you have to use the “Forgot
>     password/” option in the log in page of the FIWARE Lab Account
>     Portal".
>
>     About the other points, the same mail sent to the FIWARE users said:
>
>     “/On the official FIWARE Lab cloud environment based on the new
>     IdM GE deployed on May 7th, only the "default" organization linked
>     to a given FIWARE account will be visible as "projects" (i.e.,
>     tenants) in the cloud environment.  Organizations created through
>     the Account Portal of the FIWARE Lab will not be mapped into
>     "projects" in the cloud of the FIWARE Lab.   The name of the
>     default organization linked to your account will be "<your
>     username> cloud" (for instance “user1 cloud") although you will be
>     able to modify it.   Take into account that other organizations
>     will not be mapped to "projects" on the Cloud Portal anymore and,
>     in their case, this will mean that the associated resources will
>     be lost. Therefore, VERY IMPORTANT, you should migrate all the
>     cloud resources (VMs, etc) you may have defined linked to
>     organizations different than the organization linked as default to
>     your account and do it before May 7 (name of the default
>     organization linked to your account should currently map to your
>     account user name).  After that date, FIWARE Lab providers will
>     not be responsible for the loss of any data/.”
>
>     So, it seems exactly the behavior that you are experiencing.
>
>     I’m very sorry for the inconvenience.
>
>     Best regards
>
>     Marco
>
>     *Da:*atleta at atleta.hu <mailto:atleta at atleta.hu>
>     [mailto:atleta at atleta.hu <mailto:atleta at atleta.hu>] *Per conto di
>     *László Márai
>     *Inviato:* giovedì 7 maggio 2015 16:37
>     *A:* Cipriani Marco
>     *Cc:* fiware-lab-help
>     *Oggetto:* Re: [Fiware-lab-help] Can't access VM from outside
>
>     Hi Marco,
>
>     Something really strange happened. When trying to log in to my
>     account to get my project ID, the website was asking for a
>     password again (I should have had a valid session). Then it didn't
>     accept my password (the password was saved in both the browser and
>     my password manager, so no way I have 'forgotten it'). Then after
>     changing my password and logging in it asked in I authorize the
>     cloud application (which I have used before), then I'm not seeing
>     my instances and the only region I see is Spain2. Also, I can't
>     see our organization (PsychAsk) I created before (like months
>     ago). Now I'm only member of a project that is the same as my name
>     ( project laszlo-marai cloud (ID 00000000000000000000000000009481)
>     ). I don't know what it is, but it doesn't look right.
>
>       Thanks for your help,
>
>         Laszlo
>
>     On Thu, May 7, 2015 at 4:11 PM, Cipriani Marco
>     <marco2.cipriani at telecomitalia.it
>     <mailto:marco2.cipriani at telecomitalia.it>> wrote:
>
>     Dear Laszlo,
>
>     please could you provide us your project ID (your email account is
>     not enough)?  It can be found selecting your project name and
>     looking at the info bar in the bottom of the page, something like
>     <project-name> (ID 00000000000000000000000000000xyz).
>
>     Meanwhile, I will forward your request to the Budapest support team.
>
>     Best regards
>
>     Marco
>
>     *Da:*fiware-lab-help-bounces at lists.fi-ware.org
>     <mailto:fiware-lab-help-bounces at lists.fi-ware.org>
>     [mailto:fiware-lab-help-bounces at lists.fi-ware.org
>     <mailto:fiware-lab-help-bounces at lists.fi-ware.org>] *Per conto di
>     *László Márai
>     *Inviato:* giovedì 7 maggio 2015 15:51
>     *A:* fiware-lab-help
>     *Oggetto:* [Fiware-lab-help] Can't access VM from outside
>
>     Hi,
>
>
>     I've created a few VM instances on the Budapest node and access
>     them from the outside (tried to do so in other regions as well,
>     with less success) without any luck. Here's what I did:
>
>     1., created a security group with port 22 open (among others)
>
>     2., launched an instance using one of the images, adding it to the
>     above security group
>
>     3., associated a floating IP to one of the internal interfaces
>     (tried both 10.10.xxx and 10.20.xxx)
>
>     4., tried to connect from my machine, and received a "no route to
>     host" error
>
>     I also tried setting up my own network (it's not clear whether
>     it's necessary or not):
>
>     1., create a new network (192.168.x.x/24)
>
>     2., create a router and set the external network to the one that
>     contains my public IP ( public-ext-net-01)
>
>     3., launch a new VM instance and the network created in step 1 to it
>
>     4., associate floating IP
>
>     5., try to ssh -> no route to host
>
>     My filab user id is the same as I'm sending this email from (I
>     don't know if it's a requirement for getting a feedback for the
>     reports or not).
>
>     Thanks,
>
>     Laszlo
>
>     Questo messaggio e i suoi allegati sono indirizzati esclusivamente
>     alle persone indicate. La diffusione, copia o qualsiasi altra
>     azione derivante dalla conoscenza di queste informazioni sono
>     rigorosamente vietate. Qualora abbiate ricevuto questo documento
>     per errore siete cortesemente pregati di darne immediata
>     comunicazione al mittente e di provvedere alla sua distruzione,
>     Grazie.
>
>     /This e-mail and any attachments is confidential and may contain
>     privileged information intended for the addressee(s) only.
>     Dissemination, copying, printing or use by anybody else is
>     unauthorised. If you are not the intended recipient, please delete
>     this message and any attachments and advise the sender by return
>     e-mail, Thanks./
>
>     *Rispetta l'ambiente. Non stampare questa mail se non è necessario.*
>
>
>
>
> _______________________________________________
> Fiware-lab-help mailing list
> Fiware-lab-help at lists.fi-ware.org
> https://lists.fi-ware.org/listinfo/fiware-lab-help


-- 
Sándor Laki
EU FP7 FI-PPP XIFI project,
Wigner Research Centre for Physics,
Hungarian Academy of Sciences
Konkoly Thege Miklós út 29-33.
H-1121, Budapest, Hungary
Cell: +36 70 374 2646
Skype: sandor.laki

XIFI: https://fi-xifi.eu/home.html
FI-PPP: http://www.fi-ppp.eu/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.fiware.org/private/fiware-lab-help/attachments/20150508/8b46a5bb/attachment.html>