From Alfonso.Pietropaolo at eng.it Mon Nov 2 15:14:01 2015 From: Alfonso.Pietropaolo at eng.it (Pietropaolo Alfonso) Date: Mon, 2 Nov 2015 14:14:01 +0000 Subject: [Fiware-lab-recovery-tf] New Infographics and Staus Page: some information and a kind request In-Reply-To: References: Message-ID: <1446473640.5912.37.camel@Fujimint> Dear Silvio, after a lot of troubles with file hosts,proxy and dns ...! Finally I have had a tour of both the two new tools, and both appear very cool. Just a couple of things: - Is there a chance to integrate a button for export Infographics data in some format ? (excel,pdf...) - What about the "No Messages" when I click on the "+" of a specific node in the Status Page ? ...We can discuss in depth about that, tomorrow during TF meeting! Thanks a lot for your (and your team) great job, Alfonso On Thu, 2015-10-29 at 16:01 +0100, Silvio Cretti wrote: Dear all, I would like to inform you that in the last few months we worked hard to stabilize and improve the Infographics and Status Page tool. Here are the main achievements: 1) migration of the tool on the Spain infrastructure so as to stabilize it. At the moment the DNS has still to be updated so what the users are seeing is still the copy on Trento but soon this will change (more on this later in in this email). 2) Improvement of many functionalities: 1.1) Layout changes (in particular in the presentation of the map and of the detailed information on RAM, CPU, DISK, IP etc.). Bear in mind that in order to get info on a given "resource" for the nodes (e.g. RAM) you have to click on the corresponding button under the map and then check the tool tips 1.2) Information on the number of different types of users (trial, basic and community) 1.3) List of institutions supporting the FIWARE Lab 1.4) integration of the sanity check results into the Status Page: now for each node the current sanity check status is provided. Moreover an historical view of the sanity check status is provided (average of the values collected from the month specified in the calendar tab) based on an histogram 1.5) information on the historical values of the sanity check for a given node for each day: in the Status Page clicking on a node in the map you will be redirected to a page where the sanity check historical data is presented in a sort of "calendar per day" 1.6) information on the resources of a single node: clicking on a node in the table "FIWARE Service Status" of Status Page, a page showing the detail of that node is presented. Here you can find info about the resources of that node and of its status. Hope that the previous explanation is clear. Otherwise do not hesitate to contact me. If needed I could also do a quick demo of the new features during the next TF Meeting/Telco (on Tuesday 3rd I guess). just let me know. Now what I am kindly asking you is to have a tour on the new Infographics and Status Page so as to let me know if everything is ok from your point of view. In order to do this (since we do not have the DNS updated yet) you should add the following to your /etc/hosts file: 130.206.84.16 infographic.lab.fiware.eu 130.206.84.16 status.lab.fiware.eu and then point to infographic.lab.fiware.eu for the Infographics and to status.lab.fiware.eu for the Status Page. Our plan is to put everything in production by November 13th at latest. So please let me know your feedback asap and in any case not later than November 6th. Thanks in advance and best regards silvio _______________________________________________ Fiware-lab-recovery-tf mailing list Fiware-lab-recovery-tf at lists.fiware.org https://lists.fiware.org/listinfo/fiware-lab-recovery-tf -------------- next part -------------- An HTML attachment was scrubbed... URL: From silvio.cretti at create-net.org Mon Nov 2 19:28:35 2015 From: silvio.cretti at create-net.org (Silvio Cretti) Date: Mon, 2 Nov 2015 19:28:35 +0100 Subject: [Fiware-lab-recovery-tf] New Infographics and Staus Page: some information and a kind request In-Reply-To: <1446473640.5912.37.camel@Fujimint> References: <1446473640.5912.37.camel@Fujimint> Message-ID: Thanks Alfonso for your feedback. Regarding you comments here are some answers (if you want, we can discuss during the tomorrow telco): 1) "no messages" is related about messages that the infrastructure owner can post for his/her node. At the moment there are no message but in the future the infrastructure owner can add some informative messages related with his infrastructure. 2) regarding the possibility to export data in xls or pdf, at the moment it is not provided through the infographics tool. Of course we can provide it in the future but let me say that through the Federation Monitoring API it is already possible for a user to get all the data and then use it in the way desired by the user. So indeed everything is already possible :-). Best regards, silvio On Mon, Nov 2, 2015 at 3:14 PM, Pietropaolo Alfonso < Alfonso.Pietropaolo at eng.it> wrote: > Dear Silvio, > after a lot of troubles with file hosts,proxy and dns ...! Finally I have > had a tour of both the two new tools, and both appear very cool. > > Just a couple of things: > > - Is there a chance to integrate a button for export Infographics data in > some format ? (excel,pdf...) > > - What about the "No Messages" when I click on the "+" of a specific node > in the Status Page ? > > ...We can discuss in depth about that, tomorrow during TF meeting! > > Thanks a lot for your (and your team) great job, > > Alfonso > > > On Thu, 2015-10-29 at 16:01 +0100, Silvio Cretti wrote: > > Dear all, > > I would like to inform you that in the last few months we worked hard to > stabilize and improve the Infographics and Status Page tool. > > Here are the main achievements: > > 1*) migration of the tool on the Spain infrastructure* so as to stabilize > it. At the moment the DNS has still to be updated so what the users are > seeing is still the copy on Trento but soon this will change (more on this > later in in this email). > > 2) *Improvement of many functionalities:* > > 1.1) Layout changes (in particular in the presentation of the map and of > the detailed information on RAM, CPU, DISK, IP etc.). Bear in mind that in > order to get info on a given "resource" for the nodes (e.g. RAM) you have > to click on the corresponding button under the map and then check the tool > tips > > 1.2) Information on the number of different types of users (trial, basic > and community) > > 1.3) List of institutions supporting the FIWARE Lab > > 1.4) integration of the sanity check results into the Status Page: now for > each node the current sanity check status is provided. Moreover an > historical view of the sanity check status is provided (average of the > values collected from the month specified in the calendar tab) based on an > histogram > > 1.5) information on the historical values of the sanity check for a given > node for each day: in the Status Page clicking on a node in the map you > will be redirected to a page where the sanity check historical data is > presented in a sort of "calendar per day" > > 1.6) information on the resources of a single node: clicking on a node in > the table "FIWARE Service Status" of Status Page, a page showing the detail > of that node is presented. Here you can find info about the resources of > that node and of its status. > > > > Hope that the previous explanation is clear. Otherwise do not hesitate to > contact me. If needed I could also do a quick demo of the new features > during the next TF Meeting/Telco (on Tuesday 3rd I guess). just let me > know. > > > > Now what I am kindly asking you is to have a tour on the new Infographics > and Status Page so as to let me know if everything is ok from your point of > view. In order to do this (since we do not have the DNS updated yet) you > should add the following to your /etc/hosts file: > > > > *130.206.84.16 infographic.lab.fiware.eu > * > > *130.206.84.16 status.lab.fiware.eu * > > > > and then point to* infographic.lab.fiware.eu > * for the Infographics and to *status.lab.fiware.eu > * for the Status Page. > > > > Our plan is to put everything in production by November 13th at latest. So > please let me know your feedback asap and in any case not later than *November > 6th*. > > Thanks in advance and best regards > > silvio > > > > _______________________________________________ > Fiware-lab-recovery-tf mailing listFiware-lab-recovery-tf at lists.fiware.orghttps://lists.fiware.org/listinfo/fiware-lab-recovery-tf > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From federico.facca at create-net.org Thu Nov 26 13:15:17 2015 From: federico.facca at create-net.org (Federico Michele Facca) Date: Thu, 26 Nov 2015 13:15:17 +0100 Subject: [Fiware-lab-recovery-tf] New Infographics and Staus Page: some information and a kind request In-Reply-To: References: <1446473640.5912.37.camel@Fujimint> Message-ID: a new minor upgrade version of the infographic is now online: http://infographic.lab.fiware.org from now on, except bug fixes, we will move on to the python porting and openstack native-integration Br, Federico -- Future Internet is closer than you think! http://www.fiware.org Official Mirantis partner for OpenStack Training https://www.create-net.org/community/openstack-training -- Dr. Federico M. Facca CREATE-NET Via alla Cascata 56/D 38123 Povo Trento (Italy) P +39 0461 312471 M +39 334 6049758 E federico.facca at create-net.org T @chicco785 W www.create-net.org On Mon, Nov 2, 2015 at 7:28 PM, Silvio Cretti wrote: > Thanks Alfonso for your feedback. > Regarding you comments here are some answers (if you want, we can discuss > during the tomorrow telco): > 1) "no messages" is related about messages that the infrastructure owner > can post for his/her node. At the moment there are no message but in the > future the infrastructure owner can add some informative messages related > with his infrastructure. > 2) regarding the possibility to export data in xls or pdf, at the moment > it is not provided through the infographics tool. Of course we can provide > it in the future but let me say that through the Federation Monitoring API > it is already possible for a user to get all the data and then use it in > the way desired by the user. So indeed everything is already possible :-). > Best regards, > silvio > > On Mon, Nov 2, 2015 at 3:14 PM, Pietropaolo Alfonso < > Alfonso.Pietropaolo at eng.it> wrote: > >> Dear Silvio, >> after a lot of troubles with file hosts,proxy and dns ...! Finally I have >> had a tour of both the two new tools, and both appear very cool. >> >> Just a couple of things: >> >> - Is there a chance to integrate a button for export Infographics data in >> some format ? (excel,pdf...) >> >> - What about the "No Messages" when I click on the "+" of a specific node >> in the Status Page ? >> >> ...We can discuss in depth about that, tomorrow during TF meeting! >> >> Thanks a lot for your (and your team) great job, >> >> Alfonso >> >> >> On Thu, 2015-10-29 at 16:01 +0100, Silvio Cretti wrote: >> >> Dear all, >> >> I would like to inform you that in the last few months we worked hard to >> stabilize and improve the Infographics and Status Page tool. >> >> Here are the main achievements: >> >> 1*) migration of the tool on the Spain infrastructure* so as to >> stabilize it. At the moment the DNS has still to be updated so what the >> users are seeing is still the copy on Trento but soon this will change >> (more on this later in in this email). >> >> 2) *Improvement of many functionalities:* >> >> 1.1) Layout changes (in particular in the presentation of the map and of >> the detailed information on RAM, CPU, DISK, IP etc.). Bear in mind that in >> order to get info on a given "resource" for the nodes (e.g. RAM) you have >> to click on the corresponding button under the map and then check the tool >> tips >> >> 1.2) Information on the number of different types of users (trial, basic >> and community) >> >> 1.3) List of institutions supporting the FIWARE Lab >> >> 1.4) integration of the sanity check results into the Status Page: now >> for each node the current sanity check status is provided. Moreover an >> historical view of the sanity check status is provided (average of the >> values collected from the month specified in the calendar tab) based on an >> histogram >> >> 1.5) information on the historical values of the sanity check for a given >> node for each day: in the Status Page clicking on a node in the map you >> will be redirected to a page where the sanity check historical data is >> presented in a sort of "calendar per day" >> >> 1.6) information on the resources of a single node: clicking on a node >> in the table "FIWARE Service Status" of Status Page, a page showing the >> detail of that node is presented. Here you can find info about the >> resources of that node and of its status. >> >> >> >> Hope that the previous explanation is clear. Otherwise do not hesitate to >> contact me. If needed I could also do a quick demo of the new features >> during the next TF Meeting/Telco (on Tuesday 3rd I guess). just let me >> know. >> >> >> >> Now what I am kindly asking you is to have a tour on the new Infographics >> and Status Page so as to let me know if everything is ok from your point of >> view. In order to do this (since we do not have the DNS updated yet) you >> should add the following to your /etc/hosts file: >> >> >> >> *130.206.84.16 infographic.lab.fiware.eu >> * >> >> *130.206.84.16 status.lab.fiware.eu * >> >> >> >> and then point to* infographic.lab.fiware.eu >> * for the Infographics and to *status.lab.fiware.eu >> * for the Status Page. >> >> >> >> Our plan is to put everything in production by November 13th at latest. >> So please let me know your feedback asap and in any case not later than *November >> 6th*. >> >> Thanks in advance and best regards >> >> silvio >> >> >> >> _______________________________________________ >> Fiware-lab-recovery-tf mailing listFiware-lab-recovery-tf at lists.fiware.orghttps://lists.fiware.org/listinfo/fiware-lab-recovery-tf >> >> >> > > _______________________________________________ > Fiware-lab-recovery-tf mailing list > Fiware-lab-recovery-tf at lists.fiware.org > https://lists.fiware.org/listinfo/fiware-lab-recovery-tf > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From stefano.depanfilis at eng.it Thu Nov 26 16:16:40 2015 From: stefano.depanfilis at eng.it (stefano de panfilis) Date: Thu, 26 Nov 2015 16:16:40 +0100 Subject: [Fiware-lab-recovery-tf] New Infographics and Staus Page: some information and a kind request In-Reply-To: References: <1446473640.5912.37.camel@Fujimint> Message-ID: cool!! ciao stefano 2015-11-26 13:15 GMT+01:00 Federico Michele Facca < federico.facca at create-net.org>: > a new minor upgrade version of the infographic is now online: > > http://infographic.lab.fiware.org > > from now on, except bug fixes, we will move on to the python porting and > openstack native-integration > > Br, > Federico > > -- > Future Internet is closer than you think! > http://www.fiware.org > > Official Mirantis partner for OpenStack Training > https://www.create-net.org/community/openstack-training > > -- > Dr. Federico M. Facca > > CREATE-NET > Via alla Cascata 56/D > 38123 Povo Trento (Italy) > > P +39 0461 312471 > M +39 334 6049758 > E federico.facca at create-net.org > T @chicco785 > W www.create-net.org > > On Mon, Nov 2, 2015 at 7:28 PM, Silvio Cretti < > silvio.cretti at create-net.org> wrote: > >> Thanks Alfonso for your feedback. >> Regarding you comments here are some answers (if you want, we can discuss >> during the tomorrow telco): >> 1) "no messages" is related about messages that the infrastructure owner >> can post for his/her node. At the moment there are no message but in the >> future the infrastructure owner can add some informative messages related >> with his infrastructure. >> 2) regarding the possibility to export data in xls or pdf, at the moment >> it is not provided through the infographics tool. Of course we can provide >> it in the future but let me say that through the Federation Monitoring API >> it is already possible for a user to get all the data and then use it in >> the way desired by the user. So indeed everything is already possible :-). >> Best regards, >> silvio >> >> On Mon, Nov 2, 2015 at 3:14 PM, Pietropaolo Alfonso < >> Alfonso.Pietropaolo at eng.it> wrote: >> >>> Dear Silvio, >>> after a lot of troubles with file hosts,proxy and dns ...! Finally I >>> have had a tour of both the two new tools, and both appear very cool. >>> >>> Just a couple of things: >>> >>> - Is there a chance to integrate a button for export Infographics data >>> in some format ? (excel,pdf...) >>> >>> - What about the "No Messages" when I click on the "+" of a specific >>> node in the Status Page ? >>> >>> ...We can discuss in depth about that, tomorrow during TF meeting! >>> >>> Thanks a lot for your (and your team) great job, >>> >>> Alfonso >>> >>> >>> On Thu, 2015-10-29 at 16:01 +0100, Silvio Cretti wrote: >>> >>> Dear all, >>> >>> I would like to inform you that in the last few months we worked hard to >>> stabilize and improve the Infographics and Status Page tool. >>> >>> Here are the main achievements: >>> >>> 1*) migration of the tool on the Spain infrastructure* so as to >>> stabilize it. At the moment the DNS has still to be updated so what the >>> users are seeing is still the copy on Trento but soon this will change >>> (more on this later in in this email). >>> >>> 2) *Improvement of many functionalities:* >>> >>> 1.1) Layout changes (in particular in the presentation of the map and of >>> the detailed information on RAM, CPU, DISK, IP etc.). Bear in mind that in >>> order to get info on a given "resource" for the nodes (e.g. RAM) you have >>> to click on the corresponding button under the map and then check the tool >>> tips >>> >>> 1.2) Information on the number of different types of users (trial, basic >>> and community) >>> >>> 1.3) List of institutions supporting the FIWARE Lab >>> >>> 1.4) integration of the sanity check results into the Status Page: now >>> for each node the current sanity check status is provided. Moreover an >>> historical view of the sanity check status is provided (average of the >>> values collected from the month specified in the calendar tab) based on an >>> histogram >>> >>> 1.5) information on the historical values of the sanity check for a >>> given node for each day: in the Status Page clicking on a node in the map >>> you will be redirected to a page where the sanity check historical data is >>> presented in a sort of "calendar per day" >>> >>> 1.6) information on the resources of a single node: clicking on a node >>> in the table "FIWARE Service Status" of Status Page, a page showing the >>> detail of that node is presented. Here you can find info about the >>> resources of that node and of its status. >>> >>> >>> >>> Hope that the previous explanation is clear. Otherwise do not hesitate >>> to contact me. If needed I could also do a quick demo of the new features >>> during the next TF Meeting/Telco (on Tuesday 3rd I guess). just let me >>> know. >>> >>> >>> >>> Now what I am kindly asking you is to have a tour on the new >>> Infographics and Status Page so as to let me know if everything is ok from >>> your point of view. In order to do this (since we do not have the DNS >>> updated yet) you should add the following to your /etc/hosts file: >>> >>> >>> >>> *130.206.84.16 infographic.lab.fiware.eu >>> * >>> >>> *130.206.84.16 status.lab.fiware.eu * >>> >>> >>> >>> and then point to* infographic.lab.fiware.eu >>> * for the Infographics and to *status.lab.fiware.eu >>> * for the Status Page. >>> >>> >>> >>> Our plan is to put everything in production by November 13th at latest. >>> So please let me know your feedback asap and in any case not later than *November >>> 6th*. >>> >>> Thanks in advance and best regards >>> >>> silvio >>> >>> >>> >>> _______________________________________________ >>> Fiware-lab-recovery-tf mailing listFiware-lab-recovery-tf at lists.fiware.orghttps://lists.fiware.org/listinfo/fiware-lab-recovery-tf >>> >>> >>> >> >> _______________________________________________ >> Fiware-lab-recovery-tf mailing list >> Fiware-lab-recovery-tf at lists.fiware.org >> https://lists.fiware.org/listinfo/fiware-lab-recovery-tf >> >> > > _______________________________________________ > Fiware-lab-recovery-tf mailing list > Fiware-lab-recovery-tf at lists.fiware.org > https://lists.fiware.org/listinfo/fiware-lab-recovery-tf > > -- Stefano De Panfilis Chief Innovation Officer Engineering Ingegneria Informatica S.p.A. via Riccardo Morandi 32 00148 Roma Italy tel (direct): +39-06-8759-4253 tel (secr.): +39-068307-4513 fax: +39-068307-4200 cell: +39-335-7542-567 skype: depa01 twitter: @depa01 -------------- next part -------------- An HTML attachment was scrubbed... URL: From fernando.lopezaguilar at telefonica.com Mon Nov 30 16:52:38 2015 From: fernando.lopezaguilar at telefonica.com (FERNANDO LOPEZ AGUILAR) Date: Mon, 30 Nov 2015 15:52:38 +0000 Subject: [Fiware-lab-recovery-tf] [fiware-ops] New Infographics and Status Page: some information and a kind request Message-ID: Dear all, We have published the new version of the FIHealth component which include the following issues: Changelog * FIHealth Dashboard v1.3.0: * Timeout management for requests to Context Broker. * FIHealth Sanity Checks v1.3.0: * Improve logger: Timestamp in logs and detailed output log files for each region. * Upgrade python-swiftclient lib. * Improve the big files management for ObjectStorage testing. * Delete FIWARE Lab deprecated nodes (Waterford, Berlin2 and Stockholm) from the list of testing nodes. BR, Fernando.- ________________________________ Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario, puede contener informaci?n privilegiada o confidencial y es para uso exclusivo de la persona o entidad de destino. Si no es usted. el destinatario indicado, queda notificado de que la lectura, utilizaci?n, divulgaci?n y/o copia sin autorizaci?n puede estar prohibida en virtud de la legislaci?n vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma v?a y proceda a su destrucci?n. The information contained in this transmission is privileged and confidential information intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this transmission in error, do not read it. Please immediately reply to the sender that you have received this communication in error and then delete it. Esta mensagem e seus anexos se dirigem exclusivamente ao seu destinat?rio, pode conter informa??o privilegiada ou confidencial e ? para uso exclusivo da pessoa ou entidade de destino. Se n?o ? vossa senhoria o destinat?rio indicado, fica notificado de que a leitura, utiliza??o, divulga??o e/ou c?pia sem autoriza??o pode estar proibida em virtude da legisla??o vigente. Se recebeu esta mensagem por erro, rogamos-lhe que nos o comunique imediatamente por esta mesma via e proceda a sua destrui??o -------------- next part -------------- An HTML attachment was scrubbed... URL: