From philipp.slusallek at dfki.de Wed Aug 6 08:08:00 2014 From: philipp.slusallek at dfki.de (Philipp Slusallek) Date: Wed, 06 Aug 2014 08:08:00 +0200 Subject: [Fiware-miwi] Call today Message-ID: <53E1C640.1060600@dfki.de> Hi, Since I did not hear anything, I am assuming that we are still not having our weekly MiWi-Call today. Note: Since a repeated and major power outage on Sunday night that affected the entire SB campus and caused quite some damage, our IT infrastructure is still not entirely functional again. Sorry for any delays that might cause in answering emails. Best, Philipp -- ------------------------------------------------------------------------- Deutsches Forschungszentrum f?r K?nstliche Intelligenz (DFKI) GmbH Trippstadter Strasse 122, D-67663 Kaiserslautern Gesch?ftsf?hrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) Dr. Walter Olthoff Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes Sitz der Gesellschaft: Kaiserslautern (HRB 2313) USt-Id.Nr.: DE 148646973, Steuernummer: 19/673/0060/3 --------------------------------------------------------------------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: philipp_slusallek.vcf Type: text/x-vcard Size: 441 bytes Desc: not available URL: From mach at zhaw.ch Wed Aug 6 08:12:12 2014 From: mach at zhaw.ch (Christof Marti) Date: Wed, 6 Aug 2014 08:12:12 +0200 Subject: [Fiware-miwi] Call today In-Reply-To: <803f70f92cd044e290db85d8bdaa086a@SRV-MAIL-001.zhaw.ch> References: <803f70f92cd044e290db85d8bdaa086a@SRV-MAIL-001.zhaw.ch> Message-ID: <8B4D813E-082A-4D1C-A542-943C11840041@zhaw.ch> Hi Philipp, Hi all I?m back from vacation since yesterday and plan to do a short update meeting, to (at least) coordinate open points. Still working on the agenda: https://docs.google.com/document/d/1DJ8V0-JG39JWN7mGTBi7ZEFA0kZjhD-XoV45X9GxT74/edit Best regards Christof Am 06.08.2014 um 08:08 schrieb Philipp Slusallek : > Hi, > > Since I did not hear anything, I am assuming that we are still not > having our weekly MiWi-Call today. > > Note: Since a repeated and major power outage on Sunday night that > affected the entire SB campus and caused quite some damage, our IT > infrastructure is still not entirely functional again. Sorry for any > delays that might cause in answering emails. > > > Best, > > Philipp > -- > > ------------------------------------------------------------------------- > Deutsches Forschungszentrum f?r K?nstliche Intelligenz (DFKI) GmbH > Trippstadter Strasse 122, D-67663 Kaiserslautern > > Gesch?ftsf?hrung: > Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) > Dr. Walter Olthoff > Vorsitzender des Aufsichtsrats: > Prof. Dr. h.c. Hans A. Aukes > > Sitz der Gesellschaft: Kaiserslautern (HRB 2313) > USt-Id.Nr.: DE 148646973, Steuernummer: 19/673/0060/3 > --------------------------------------------------------------------------- > _______________________________________________ > Fiware-miwi mailing list > Fiware-miwi at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-miwi From mach at zhaw.ch Wed Aug 6 08:26:10 2014 From: mach at zhaw.ch (Marti Christof (mach)) Date: Wed, 6 Aug 2014 06:26:10 +0000 Subject: [Fiware-miwi] Call today In-Reply-To: References: <803f70f92cd044e290db85d8bdaa086a@SRV-MAIL-001.zhaw.ch> Message-ID: Hangout link for call: https://plus.google.com/hangouts/_/gymfls6dzknfsuk5pjztpe3yh4a?hl=de See you in a few minutes. - Christof Am 06.08.2014 um 08:12 schrieb Marti Christof (mach) : > Hi Philipp, Hi all > > I?m back from vacation since yesterday and plan to do a short update meeting, to (at least) coordinate open points. > > Still working on the agenda: > https://docs.google.com/document/d/1DJ8V0-JG39JWN7mGTBi7ZEFA0kZjhD-XoV45X9GxT74/edit > > Best regards > Christof > > > > Am 06.08.2014 um 08:08 schrieb Philipp Slusallek : > >> Hi, >> >> Since I did not hear anything, I am assuming that we are still not >> having our weekly MiWi-Call today. >> >> Note: Since a repeated and major power outage on Sunday night that >> affected the entire SB campus and caused quite some damage, our IT >> infrastructure is still not entirely functional again. Sorry for any >> delays that might cause in answering emails. >> >> >> Best, >> >> Philipp >> -- >> >> ------------------------------------------------------------------------- >> Deutsches Forschungszentrum f?r K?nstliche Intelligenz (DFKI) GmbH >> Trippstadter Strasse 122, D-67663 Kaiserslautern >> >> Gesch?ftsf?hrung: >> Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) >> Dr. Walter Olthoff >> Vorsitzender des Aufsichtsrats: >> Prof. Dr. h.c. Hans A. Aukes >> >> Sitz der Gesellschaft: Kaiserslautern (HRB 2313) >> USt-Id.Nr.: DE 148646973, Steuernummer: 19/673/0060/3 >> --------------------------------------------------------------------------- >> _______________________________________________ >> Fiware-miwi mailing list >> Fiware-miwi at lists.fi-ware.org >> https://lists.fi-ware.org/listinfo/fiware-miwi > > _______________________________________________ > Fiware-miwi mailing list > Fiware-miwi at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-miwi From miguel.carrillopacheco at telefonica.com Thu Aug 7 11:18:58 2014 From: miguel.carrillopacheco at telefonica.com (MIGUEL CARRILLO PACHECO) Date: Thu, 7 Aug 2014 11:18:58 +0200 Subject: [Fiware-miwi] WP13 Open Specs ready for delivery: please check changes !! Message-ID: <53E34482.5080403@telefonica.com> Dear all, First of all, my most sincere apologies, it has been impossible to look at this until now. I did a very shallow review and changed a few things. Note that some impact the Terms and Conditions. The general aspect is rather good. As there are modifications, I will wait for a few days as a precautionary measure. I will deliver at the end of Monday if no one objects. If the WPL confirms on behalf of the WP that we can deliver before then, I will do so. A detailed account of the changes follow. I also enclose the doc in pdf and word format. Best regards, Miguel ======================================== * Removed the 2 sections with DaaS from the text * Removed DaaS from the picture under 1.4 Chapter Context * Removed the two links for DaaS under 1.5 Structure of this document * MiWi 3D-UI with old license - replaced by implicit patents license (as per the orders received from Juanjo) * Section 18.1 POI Data Provider - ditto * Added an entry under 1.9 Changes History and modified the cover accordingly * Cover format changes * Section 1.4: small typo amended (aka as MiWi -> "AKA MiWi") * Fixed wrong link under "2.6.2 Classification of functions" * In 3.1 link to "eProsima RPC over DDS" - I reuse the one they use later in the same section for "Introduction to RPC over DDS ". I guess that it was not the same but I cannot delay a delivery for this. * All the boxes that contain a link under "chapter" that points at a category that does not exist. Clicking on the link causes a browser error. (Example: 2 FIWARE OpenSpecification MiWi Middleware). I leave them as they are in the hope that that such category will be created and it will exist once the Open Specs are ported to the public wiki... i.e. the links should work once ported. * 18.1.5 I removed this remark, which is not acceptable: "You can download the most current version of this document from the FIWARE Open Specification website at D.13.1.2_FI-WARE_GE_Open_Specifications_front_page. ". This page is for internal use and it is not intended for this. * -- Please update your address book with my new e-mail address: miguel.carrillopacheco at telefonica.com ---------------------------------------------------------------------- _/ _/_/ Miguel Carrillo Pacheco _/ _/ _/ _/ Telef?nica Distrito Telef?nica _/ _/_/_/ _/ _/ Investigaci?n y Edifico Oeste 1, Planta 9 _/ _/ _/ _/ Desarrollo Ronda de la Comunicaci?n S/N _/ _/_/ 28050 Madrid (Spain) Tel: (+34) 91 483 26 77 e-mail: miguel.carrillopacheco at telefonica.com Follow FI-WARE on the net Website: http://www.fi-ware.org Facebook: http://www.facebook.com/pages/FI-WARE/251366491587242 Twitter: http://twitter.com/Fiware LinkedIn: http://www.linkedin.com/groups/FIWARE-4239932 ---------------------------------------------------------------------- ________________________________ Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario, puede contener informaci?n privilegiada o confidencial y es para uso exclusivo de la persona o entidad de destino. Si no es usted. el destinatario indicado, queda notificado de que la lectura, utilizaci?n, divulgaci?n y/o copia sin autorizaci?n puede estar prohibida en virtud de la legislaci?n vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma v?a y proceda a su destrucci?n. The information contained in this transmission is privileged and confidential information intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this transmission in error, do not read it. Please immediately reply to the sender that you have received this communication in error and then delete it. Esta mensagem e seus anexos se dirigem exclusivamente ao seu destinat?rio, pode conter informa??o privilegiada ou confidencial e ? para uso exclusivo da pessoa ou entidade de destino. Se n?o ? vossa senhoria o destinat?rio indicado, fica notificado de que a leitura, utiliza??o, divulga??o e/ou c?pia sem autoriza??o pode estar proibida em virtude da legisla??o vigente. Se recebeu esta mensagem por erro, rogamos-lhe que nos o comunique imediatamente por esta mesma via e proceda a sua destrui??o -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: D.13.1.3-FI-WARE GE Open Specification - V4.0 - 2014-06-09.pdf Type: application/pdf Size: 3644371 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: D.13.1.3-FI-WARE GE Open Specification - V4.0 - 2014-06-09.docx Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document Size: 3029535 bytes Desc: not available URL: From mach at zhaw.ch Mon Aug 11 08:45:25 2014 From: mach at zhaw.ch (Marti Christof (mach)) Date: Mon, 11 Aug 2014 06:45:25 +0000 Subject: [Fiware-miwi] WP13 Open Specs ready for delivery: please check changes !! In-Reply-To: <8ddcad2c02374d3fbae3b7a2ae3780eb@SRV-MAIL-001.zhaw.ch> References: <8ddcad2c02374d3fbae3b7a2ae3780eb@SRV-MAIL-001.zhaw.ch> Message-ID: <0A5A6254-8B00-466F-B8CF-40E9AC367D17@zhaw.ch> Hi Miguel Thanks you very much. I checked all your changes and incorporated also the updates and suggestions from Manuels earlier review. I did it in ?change tracking mode?. So you an easily see the changes. Most of them are spelling corrections or format enhancements (e.g. tables instead of pre-formated text). >From WP13 side it is ready to deliver. Please let me know if it is OK for you, so I can create the final document (Word/PDF) and upload it to forge (or are you doing this?). I also updated the wiki with all the changes and will copy the pages to the public wiki this afternoon/evening, if it is OK for you. Best regards Christof Am 07.08.2014 um 11:18 schrieb MIGUEL CARRILLO PACHECO >: Dear all, First of all, my most sincere apologies, it has been impossible to look at this until now. I did a very shallow review and changed a few things. Note that some impact the Terms and Conditions. The general aspect is rather good. As there are modifications, I will wait for a few days as a precautionary measure. I will deliver at the end of Monday if no one objects. If the WPL confirms on behalf of the WP that we can deliver before then, I will do so. A detailed account of the changes follow. I also enclose the doc in pdf and word format. Best regards, Miguel ======================================== * Removed the 2 sections with DaaS from the text * Removed DaaS from the picture under 1.4 Chapter Context * Removed the two links for DaaS under 1.5 Structure of this document * MiWi 3D-UI with old license - replaced by implicit patents license (as per the orders received from Juanjo) * Section 18.1 POI Data Provider - ditto * Added an entry under 1.9 Changes History and modified the cover accordingly * Cover format changes * Section 1.4: small typo amended (aka as MiWi -> "AKA MiWi") * Fixed wrong link under "2.6.2 Classification of functions" * In 3.1 link to "eProsima RPC over DDS" - I reuse the one they use later in the same section for "Introduction to RPC over DDS ". I guess that it was not the same but I cannot delay a delivery for this. * All the boxes that contain a link under "chapter" that points at a category that does not exist. Clicking on the link causes a browser error. (Example: 2 FIWARE OpenSpecification MiWi Middleware). I leave them as they are in the hope that that such category will be created and it will exist once the Open Specs are ported to the public wiki... i.e. the links should work once ported. * 18.1.5 I removed this remark, which is not acceptable: "You can download the most current version of this document from the FIWARE Open Specification website at D.13.1.2_FI-WARE_GE_Open_Specifications_front_page. ". This page is for internal use and it is not intended for this. * -- Please update your address book with my new e-mail address: miguel.carrillopacheco at telefonica.com ---------------------------------------------------------------------- _/ _/_/ Miguel Carrillo Pacheco _/ _/ _/ _/ Telef?nica Distrito Telef?nica _/ _/_/_/ _/ _/ Investigaci?n y Edifico Oeste 1, Planta 9 _/ _/ _/ _/ Desarrollo Ronda de la Comunicaci?n S/N _/ _/_/ 28050 Madrid (Spain) Tel: (+34) 91 483 26 77 e-mail: miguel.carrillopacheco at telefonica.com Follow FI-WARE on the net Website: http://www.fi-ware.org Facebook: http://www.facebook.com/pages/FI-WARE/251366491587242 Twitter: http://twitter.com/Fiware LinkedIn: http://www.linkedin.com/groups/FIWARE-4239932 ---------------------------------------------------------------------- ________________________________ Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario, puede contener informaci?n privilegiada o confidencial y es para uso exclusivo de la persona o entidad de destino. Si no es usted. el destinatario indicado, queda notificado de que la lectura, utilizaci?n, divulgaci?n y/o copia sin autorizaci?n puede estar prohibida en virtud de la legislaci?n vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma v?a y proceda a su destrucci?n. The information contained in this transmission is privileged and confidential information intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this transmission in error, do not read it. Please immediately reply to the sender that you have received this communication in error and then delete it. Esta mensagem e seus anexos se dirigem exclusivamente ao seu destinat?rio, pode conter informa??o privilegiada ou confidencial e ? para uso exclusivo da pessoa ou entidade de destino. Se n?o ? vossa senhoria o destinat?rio indicado, fica notificado de que a leitura, utiliza??o, divulga??o e/ou c?pia sem autoriza??o pode estar proibida em virtude da legisla??o vigente. Se recebeu esta mensagem por erro, rogamos-lhe que nos o comunique imediatamente por esta mesma via e proceda a sua destrui??o -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: D.13.1.3-FI-WARE GE Open Specification - V5.0 - 2014-08-06.docx Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document Size: 3105280 bytes Desc: D.13.1.3-FI-WARE GE Open Specification - V5.0 - 2014-08-06.docx URL: From miguel.carrillopacheco at telefonica.com Mon Aug 11 10:08:17 2014 From: miguel.carrillopacheco at telefonica.com (MIGUEL CARRILLO PACHECO) Date: Mon, 11 Aug 2014 10:08:17 +0200 Subject: [Fiware-miwi] WP13 Open Specs ready for delivery: please check changes !! In-Reply-To: <0A5A6254-8B00-466F-B8CF-40E9AC367D17@zhaw.ch> References: <8ddcad2c02374d3fbae3b7a2ae3780eb@SRV-MAIL-001.zhaw.ch> <0A5A6254-8B00-466F-B8CF-40E9AC367D17@zhaw.ch> Message-ID: <53E879F1.5050707@telefonica.com> Dear Christof, This message crossed with one I sent you in private. Good news then! Thanks for that. We leave work at 3pm in the summer here at Telefonica and then I have personal commitments later, waiting till the afternoon/evening would take the delivery to tomorrow. I prefer to take it up and deliver as you have confirmed that this copy is ok to deliver. I will just accept the changes and modify the cover. The cover gets distorted on my PC- this is what I meant by "Cover format changes". I assume that the doc looks different on your PC and mine. I will make it look nice on my computer to be able to create the pdf file. [cid:part1.03010905.05010209 at telefonica.com] Let us close this deliverable at once. I will look into this and deliver in a few minutes. I will create the pdf and upload all to the forge. Porting to the public wiki asap is welcome but not necessarily today - I mean, do not leave if for too long but porting it the same date than the delivery date is a not a strong requisite. Best regards, Miguel El 11/08/2014 8:45, Marti Christof (mach) escribi?: Hi Miguel Thanks you very much. I checked all your changes and incorporated also the updates and suggestions from Manuels earlier review. I did it in ?change tracking mode?. So you an easily see the changes. Most of them are spelling corrections or format enhancements (e.g. tables instead of pre-formated text). >From WP13 side it is ready to deliver. Please let me know if it is OK for you, so I can create the final document (Word/PDF) and upload it to forge (or are you doing this?). I also updated the wiki with all the changes and will copy the pages to the public wiki this afternoon/evening, if it is OK for you. Best regards Christof Am 07.08.2014 um 11:18 schrieb MIGUEL CARRILLO PACHECO >: Dear all, First of all, my most sincere apologies, it has been impossible to look at this until now. I did a very shallow review and changed a few things. Note that some impact the Terms and Conditions. The general aspect is rather good. As there are modifications, I will wait for a few days as a precautionary measure. I will deliver at the end of Monday if no one objects. If the WPL confirms on behalf of the WP that we can deliver before then, I will do so. A detailed account of the changes follow. I also enclose the doc in pdf and word format. Best regards, Miguel ======================================== * Removed the 2 sections with DaaS from the text * Removed DaaS from the picture under 1.4 Chapter Context * Removed the two links for DaaS under 1.5 Structure of this document * MiWi 3D-UI with old license - replaced by implicit patents license (as per the orders received from Juanjo) * Section 18.1 POI Data Provider - ditto * Added an entry under 1.9 Changes History and modified the cover accordingly * Cover format changes * Section 1.4: small typo amended (aka as MiWi -> "AKA MiWi") * Fixed wrong link under "2.6.2 Classification of functions" * In 3.1 link to "eProsima RPC over DDS" - I reuse the one they use later in the same section for "Introduction to RPC over DDS ". I guess that it was not the same but I cannot delay a delivery for this. * All the boxes that contain a link under "chapter" that points at a category that does not exist. Clicking on the link causes a browser error. (Example: 2 FIWARE OpenSpecification MiWi Middleware). I leave them as they are in the hope that that such category will be created and it will exist once the Open Specs are ported to the public wiki... i.e. the links should work once ported. * 18.1.5 I removed this remark, which is not acceptable: "You can download the most current version of this document from the FIWARE Open Specification website at D.13.1.2_FI-WARE_GE_Open_Specifications_front_page. ". This page is for internal use and it is not intended for this. * -- Please update your address book with my new e-mail address: miguel.carrillopacheco at telefonica.com ---------------------------------------------------------------------- _/ _/_/ Miguel Carrillo Pacheco _/ _/ _/ _/ Telef?nica Distrito Telef?nica _/ _/_/_/ _/ _/ Investigaci?n y Edifico Oeste 1, Planta 9 _/ _/ _/ _/ Desarrollo Ronda de la Comunicaci?n S/N _/ _/_/ 28050 Madrid (Spain) Tel: (+34) 91 483 26 77 e-mail: miguel.carrillopacheco at telefonica.com Follow FI-WARE on the net Website: http://www.fi-ware.org Facebook: http://www.facebook.com/pages/FI-WARE/251366491587242 Twitter: http://twitter.com/Fiware LinkedIn: http://www.linkedin.com/groups/FIWARE-4239932 ---------------------------------------------------------------------- ________________________________ Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario, puede contener informaci?n privilegiada o confidencial y es para uso exclusivo de la persona o entidad de destino. Si no es usted. el destinatario indicado, queda notificado de que la lectura, utilizaci?n, divulgaci?n y/o copia sin autorizaci?n puede estar prohibida en virtud de la legislaci?n vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma v?a y proceda a su destrucci?n. The information contained in this transmission is privileged and confidential information intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this transmission in error, do not read it. Please immediately reply to the sender that you have received this communication in error and then delete it. Esta mensagem e seus anexos se dirigem exclusivamente ao seu destinat?rio, pode conter informa??o privilegiada ou confidencial e ? para uso exclusivo da pessoa ou entidade de destino. Se n?o ? vossa senhoria o destinat?rio indicado, fica notificado de que a leitura, utiliza??o, divulga??o e/ou c?pia sem autoriza??o pode estar proibida em virtude da legisla??o vigente. Se recebeu esta mensagem por erro, rogamos-lhe que nos o comunique imediatamente por esta mesma via e proceda a sua destrui??o -- Please update your address book with my new e-mail address: miguel.carrillopacheco at telefonica.com ---------------------------------------------------------------------- _/ _/_/ Miguel Carrillo Pacheco _/ _/ _/ _/ Telef?nica Distrito Telef?nica _/ _/_/_/ _/ _/ Investigaci?n y Edifico Oeste 1, Planta 9 _/ _/ _/ _/ Desarrollo Ronda de la Comunicaci?n S/N _/ _/_/ 28050 Madrid (Spain) Tel: (+34) 91 483 26 77 e-mail: miguel.carrillopacheco at telefonica.com Follow FI-WARE on the net Website: http://www.fi-ware.org Facebook: http://www.facebook.com/pages/FI-WARE/251366491587242 Twitter: http://twitter.com/Fiware LinkedIn: http://www.linkedin.com/groups/FIWARE-4239932 ---------------------------------------------------------------------- ________________________________ Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario, puede contener informaci?n privilegiada o confidencial y es para uso exclusivo de la persona o entidad de destino. Si no es usted. el destinatario indicado, queda notificado de que la lectura, utilizaci?n, divulgaci?n y/o copia sin autorizaci?n puede estar prohibida en virtud de la legislaci?n vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma v?a y proceda a su destrucci?n. The information contained in this transmission is privileged and confidential information intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this transmission in error, do not read it. Please immediately reply to the sender that you have received this communication in error and then delete it. Esta mensagem e seus anexos se dirigem exclusivamente ao seu destinat?rio, pode conter informa??o privilegiada ou confidencial e ? para uso exclusivo da pessoa ou entidade de destino. Se n?o ? vossa senhoria o destinat?rio indicado, fica notificado de que a leitura, utiliza??o, divulga??o e/ou c?pia sem autoriza??o pode estar proibida em virtude da legisla??o vigente. Se recebeu esta mensagem por erro, rogamos-lhe que nos o comunique imediatamente por esta mesma via e proceda a sua destrui??o -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: fbdhdcga.png Type: image/png Size: 14655 bytes Desc: not available URL: From mach at zhaw.ch Wed Aug 13 08:22:26 2014 From: mach at zhaw.ch (Marti Christof (mach)) Date: Wed, 13 Aug 2014 06:22:26 +0000 Subject: [Fiware-miwi] MIWI call canceled Message-ID: <1655EF77-7FE6-43F6-B56D-D911A336B60F@zhaw.ch> Hi I have to cancel todays call. I am in Sardinia this week and have a very spotty and unreliable 3G internet connection. (mail & web barely works with interruptions, no chance for voice) - I will copy the OpenSpec to the public wiki asap ; (probably this morning, if internet gods are graceful :) - Sandro is working on some Chef examples/templates. (I also hope to be able to send you an update today on this, so we can complete the packaging) Some other open actions points: - Please create and complete your GEi Catalog entries - Please work on the elearning content for your GEi?s links and some basic instructions in last weeks minutes: https://docs.google.com/document/d/1DJ8V0-JG39JWN7mGTBi7ZEFA0kZjhD-XoV45X9GxT74/edit Best regards, Christof ---- InIT Cloud Computing Lab - ICCLab Institut of Applied Information Technology - InIT Zurich University of Applied Sciences - ZHAW School of Engineering Phone: +41 58 934 70 63 Skype: christof-marti From mach at zhaw.ch Wed Aug 13 08:54:16 2014 From: mach at zhaw.ch (Marti Christof (mach)) Date: Wed, 13 Aug 2014 06:54:16 +0000 Subject: [Fiware-miwi] Fwd: Submission of D.13.1.3 FI-WARE GE Open Specifications (MiWi Chapter) References: <7a6614872d084f5199d6342da672ae32@SRV-MAIL-001.zhaw.ch> Message-ID: <173D1132-68E3-4511-BE25-BB405398B48D@zhaw.ch> FYI Anfang der weitergeleiteten Nachricht: Umgeleitet von: > Von: MIGUEL CARRILLO PACHECO > Betreff: Submission of D.13.1.3 FI-WARE GE Open Specifications (MiWi Chapter) Datum: 11. August 2014 [33] 10:44:37 MESZ An: "Arian.ZWEGERS at ec.europa.eu" >, "CNECT-ICT-285248 at ec.europa.eu" > Dear all, This is the official submission of the following deliverable of WP13 in the project FI-WARE for M36: * D.13.1.3 FI-WARE GE Open Specifications The document is publicly available on: * https://forge.fi-ware.org/docman/view.php/7/4661/D.13.1.3+FI-WARE+GE+Open+Specifications.pdf You can also find it attached to this message. The public pages that relate to this document are always up to date on our wiki under the links: * http://wiki.fi-ware.org/Summary_of_FI-WARE_Open_Specifications * http://wiki.fi-ware.org/Summary_of_FI-WARE_API_Open_Specifications Best regards, Miguel -- Please update your address book with my new e-mail address: miguel.carrillopacheco at telefonica.com ---------------------------------------------------------------------- _/ _/_/ Miguel Carrillo Pacheco _/ _/ _/ _/ Telef?nica Distrito Telef?nica _/ _/_/_/ _/ _/ Investigaci?n y Edifico Oeste 1, Planta 9 _/ _/ _/ _/ Desarrollo Ronda de la Comunicaci?n S/N _/ _/_/ 28050 Madrid (Spain) Tel: (+34) 91 483 26 77 e-mail: miguel.carrillopacheco at telefonica.com Follow FI-WARE on the net Website: http://www.fi-ware.org Facebook: http://www.facebook.com/pages/FI-WARE/251366491587242 Twitter: http://twitter.com/Fiware LinkedIn: http://www.linkedin.com/groups/FIWARE-4239932 ---------------------------------------------------------------------- ________________________________ Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario, puede contener informaci?n privilegiada o confidencial y es para uso exclusivo de la persona o entidad de destino. Si no es usted. el destinatario indicado, queda notificado de que la lectura, utilizaci?n, divulgaci?n y/o copia sin autorizaci?n puede estar prohibida en virtud de la legislaci?n vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma v?a y proceda a su destrucci?n. The information contained in this transmission is privileged and confidential information intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this transmission in error, do not read it. Please immediately reply to the sender that you have received this communication in error and then delete it. Esta mensagem e seus anexos se dirigem exclusivamente ao seu destinat?rio, pode conter informa??o privilegiada ou confidencial e ? para uso exclusivo da pessoa ou entidade de destino. Se n?o ? vossa senhoria o destinat?rio indicado, fica notificado de que a leitura, utiliza??o, divulga??o e/ou c?pia sem autoriza??o pode estar proibida em virtude da legisla??o vigente. Se recebeu esta mensagem por erro, rogamos-lhe que nos o comunique imediatamente por esta mesma via e proceda a sua destrui??o -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: D.13.1.3 FI-WARE GE Open Specifications.pdf Type: application/pdf Size: 3639453 bytes Desc: D.13.1.3 FI-WARE GE Open Specifications.pdf URL: From miguel.carrillopacheco at telefonica.com Thu Aug 14 16:05:17 2014 From: miguel.carrillopacheco at telefonica.com (MIGUEL CARRILLO PACHECO) Date: Thu, 14 Aug 2014 16:05:17 +0200 Subject: [Fiware-miwi] [URGENT] Action required on catalogue Message-ID: <53ECC21D.5060701@telefonica.com> Dear all, I am aware that the work has internally started and Christof duly informed of the status. However and after dispatching with Juanjo we both agree that it is worth sending a message to give you the context. For reasons we all know WP13 is basically not present in the catalogue and until we get GEs there, "WP13 does not exist". Luckily, all is unblocked now. The EC is starting an inspection of the catalogue soon. Editing catalogue entries takes some time and follows strict rules. There are guidelines but it is better to take a couple of good examples and you can follow the same structure. * http://catalogue.fi-ware.org/enablers/application-mashup-wirecloud * http://catalogue.fi-ware.org/enablers/configuration-manager-orion-context-broker I am telling you this because it is better for all to avoid needless iterations. I went to WP13 on the catalogue and what I saw falls into one of these categories: * GEs not present at all * GEs with drafts that do not follow standard sections (for instance, none of them has the 3 sub-sections under "Terms and Conditions" - they are not suitable for publication) One more thing. In licenses GPL or Affero GPL (just these) we need this additional text: Please note that software derived as a result of modifying the source code of software in order to fix a bug or incorporate enhancements is considered a derivative work of the product. Software that merely uses or aggregates (i.e. links to) an otherwise unmodified version of existing software is not considered a derivative work. This text is in the examples I provided so you get the idea. Thanks a lot, Miguel -- Please update your address book with my new e-mail address: miguel.carrillopacheco at telefonica.com ---------------------------------------------------------------------- _/ _/_/ Miguel Carrillo Pacheco _/ _/ _/ _/ Telef?nica Distrito Telef?nica _/ _/_/_/ _/ _/ Investigaci?n y Edifico Oeste 1, Planta 9 _/ _/ _/ _/ Desarrollo Ronda de la Comunicaci?n S/N _/ _/_/ 28050 Madrid (Spain) Tel: (+34) 91 483 26 77 e-mail: miguel.carrillopacheco at telefonica.com Follow FI-WARE on the net Website: http://www.fi-ware.org Facebook: http://www.facebook.com/pages/FI-WARE/251366491587242 Twitter: http://twitter.com/Fiware LinkedIn: http://www.linkedin.com/groups/FIWARE-4239932 ---------------------------------------------------------------------- ________________________________ Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario, puede contener informaci?n privilegiada o confidencial y es para uso exclusivo de la persona o entidad de destino. Si no es usted. el destinatario indicado, queda notificado de que la lectura, utilizaci?n, divulgaci?n y/o copia sin autorizaci?n puede estar prohibida en virtud de la legislaci?n vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma v?a y proceda a su destrucci?n. The information contained in this transmission is privileged and confidential information intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this transmission in error, do not read it. Please immediately reply to the sender that you have received this communication in error and then delete it. Esta mensagem e seus anexos se dirigem exclusivamente ao seu destinat?rio, pode conter informa??o privilegiada ou confidencial e ? para uso exclusivo da pessoa ou entidade de destino. Se n?o ? vossa senhoria o destinat?rio indicado, fica notificado de que a leitura, utiliza??o, divulga??o e/ou c?pia sem autoriza??o pode estar proibida em virtude da legisla??o vigente. Se recebeu esta mensagem por erro, rogamos-lhe que nos o comunique imediatamente por esta mesma via e proceda a sua destrui??o -------------- next part -------------- An HTML attachment was scrubbed... URL: From mach at zhaw.ch Mon Aug 18 15:35:53 2014 From: mach at zhaw.ch (Marti Christof (mach)) Date: Mon, 18 Aug 2014 13:35:53 +0000 Subject: [Fiware-miwi] Rescheduling of this weekly meeting to tomorrow afternoon. Please fill doodle until today 19:00 Message-ID: Dear WP13 partners >From Wednesday to Friday I will be on a retreat and not available for a meeting. Therefore I would like to reschedule the WP13 meeting to tomorrow (Tuesday Aug 19) afternoon. Because we have some important short term actions (see below), it would be good to have a representative of each partner in the meeting. To find the best slot please select all the possible entries in this doodle: http://doodle.com/66y6p552az54tcqv until today 19:00 CEST. I will send a final time based on the entries I have until then. Main topics of the meeting will be: - Creating the GEi catalogue entries (separate email follows) - Packaging for FI-LAB (separate email follows) & bundles - WP11 contributions (Market Analysis, Exploitation Plan, Standardization) - Participation on ECFI on Munich (Sept 17-18). Demo/Presentation - other topics like (admin, tracker & elearning) Best regards Christof ---- InIT Cloud Computing Lab Institut of Applied Information Technology - InIT Zurich University of Applied Sciences - ZHAW School of Engineering Phone: +41 58 934 70 63 Skype: christof-marti From mach at zhaw.ch Mon Aug 18 15:56:07 2014 From: mach at zhaw.ch (Marti Christof (mach)) Date: Mon, 18 Aug 2014 13:56:07 +0000 Subject: [Fiware-miwi] [URGENT] Action required on catalogue In-Reply-To: <6e2aa8c3b8fe4bd2aca294d8aa32029e@SRV-MAIL-001.zhaw.ch> References: <6e2aa8c3b8fe4bd2aca294d8aa32029e@SRV-MAIL-001.zhaw.ch> Message-ID: Hi The WP13 OpenSpecifications (& Architecture) is available on the public wiki since mid last week (http://wiki.fi-ware.org). On Friday I also updated the Architecture overview figure to contain the MiWi GEs (http://wiki.fi-ware.org/FI-WARE_Architecture). Still open and one of tomorrows main topics will be the creation of the catalogue entries. The commission will very soon start to verify the catalogue, to see what the status of the GEs is. Therefore it is very important to have the entries ASAP * Please follow the guidelines in Miguels email (below) from last Thursday Aug 14 * When creating the catalog entries, make also sure to give the enabler the name which matches to the link on the OpenSpecification page (see Catalogue-Link in your GE OpenSpec header). (e.g. in http://wiki.fi-ware.org/FIWARE.OpenSpecification.MiWi.GISDataProvider the link points to http://catalogue.fi-ware.org/enablers/gis-data-provider, therefore the Name should be ?GIS Data Provider?). * Very important is to have the correct ?Terms and Conditions?. It has to provide the term and conditions for all three cases ?Experimentation/testing within the scope of FI-PPP?, ?FI-LAB (Open Innovation Lab)? and ?External Availability? (outside of FI-PPP, FI-LAB). For the first two it is easiest to copy the content from a good example (e.g. Orion Context Broker). The "External Availability" specifies the public license (outside of FI-WARE/FI-LAB). if it is a GPL or AGPL license, please also add the required paragraph from Miguel?s email below and see the linked examples (Orion context broker & Wirecloud). Best regards Christof Am 14.08.2014 um 16:05 schrieb MIGUEL CARRILLO PACHECO >: Dear all, I am aware that the work has internally started and Christof duly informed of the status. However and after dispatching with Juanjo we both agree that it is worth sending a message to give you the context. For reasons we all know WP13 is basically not present in the catalogue and until we get GEs there, "WP13 does not exist". Luckily, all is unblocked now. The EC is starting an inspection of the catalogue soon. Editing catalogue entries takes some time and follows strict rules. There are guidelines but it is better to take a couple of good examples and you can follow the same structure. * http://catalogue.fi-ware.org/enablers/application-mashup-wirecloud * http://catalogue.fi-ware.org/enablers/configuration-manager-orion-context-broker I am telling you this because it is better for all to avoid needless iterations. I went to WP13 on the catalogue and what I saw falls into one of these categories: * GEs not present at all * GEs with drafts that do not follow standard sections (for instance, none of them has the 3 sub-sections under "Terms and Conditions" - they are not suitable for publication) One more thing. In licenses GPL or Affero GPL (just these) we need this additional text: Please note that software derived as a result of modifying the source code of software in order to fix a bug or incorporate enhancements is considered a derivative work of the product. Software that merely uses or aggregates (i.e. links to) an otherwise unmodified version of existing software is not considered a derivative work. This text is in the examples I provided so you get the idea. Thanks a lot, Miguel -- Please update your address book with my new e-mail address: miguel.carrillopacheco at telefonica.com ---------------------------------------------------------------------- _/ _/_/ Miguel Carrillo Pacheco _/ _/ _/ _/ Telef?nica Distrito Telef?nica _/ _/_/_/ _/ _/ Investigaci?n y Edifico Oeste 1, Planta 9 _/ _/ _/ _/ Desarrollo Ronda de la Comunicaci?n S/N _/ _/_/ 28050 Madrid (Spain) Tel: (+34) 91 483 26 77 e-mail: miguel.carrillopacheco at telefonica.com Follow FI-WARE on the net Website: http://www.fi-ware.org Facebook: http://www.facebook.com/pages/FI-WARE/251366491587242 Twitter: http://twitter.com/Fiware LinkedIn: http://www.linkedin.com/groups/FIWARE-4239932 ---------------------------------------------------------------------- ________________________________ Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario, puede contener informaci?n privilegiada o confidencial y es para uso exclusivo de la persona o entidad de destino. Si no es usted. el destinatario indicado, queda notificado de que la lectura, utilizaci?n, divulgaci?n y/o copia sin autorizaci?n puede estar prohibida en virtud de la legislaci?n vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma v?a y proceda a su destrucci?n. The information contained in this transmission is privileged and confidential information intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this transmission in error, do not read it. Please immediately reply to the sender that you have received this communication in error and then delete it. Esta mensagem e seus anexos se dirigem exclusivamente ao seu destinat?rio, pode conter informa??o privilegiada ou confidencial e ? para uso exclusivo da pessoa ou entidade de destino. Se n?o ? vossa senhoria o destinat?rio indicado, fica notificado de que a leitura, utiliza??o, divulga??o e/ou c?pia sem autoriza??o pode estar proibida em virtude da legisla??o vigente. Se recebeu esta mensagem por erro, rogamos-lhe que nos o comunique imediatamente por esta mesma via e proceda a sua destrui??o _______________________________________________ Fiware-miwi mailing list Fiware-miwi at lists.fi-ware.org https://lists.fi-ware.org/listinfo/fiware-miwi -------------- next part -------------- An HTML attachment was scrubbed... URL: From mach at zhaw.ch Tue Aug 19 08:27:58 2014 From: mach at zhaw.ch (Marti Christof (mach)) Date: Tue, 19 Aug 2014 06:27:58 +0000 Subject: [Fiware-miwi] weekly meeting today 14:00 CEST In-Reply-To: References: Message-ID: Hi We will have the meeting today 14:00 CEST. I will send a hangout link short before the meeting. Best regards Christof Am 18.08.2014 um 15:35 schrieb Marti Christof (mach) : > Dear WP13 partners > > From Wednesday to Friday I will be on a retreat and not available for a meeting. > Therefore I would like to reschedule the WP13 meeting to tomorrow (Tuesday Aug 19) afternoon. > > Because we have some important short term actions (see below), it would be good to have a representative of each partner in the meeting. To find the best slot please select all the possible entries in this doodle: http://doodle.com/66y6p552az54tcqv until today 19:00 CEST. I will send a final time based on the entries I have until then. > > Main topics of the meeting will be: > - Creating the GEi catalogue entries (separate email follows) > - Packaging for FI-LAB (separate email follows) & bundles > - WP11 contributions (Market Analysis, Exploitation Plan, Standardization) > - Participation on ECFI on Munich (Sept 17-18). Demo/Presentation > - other topics like (admin, tracker & elearning) > > Best regards > Christof > ---- > InIT Cloud Computing Lab > Institut of Applied Information Technology - InIT > Zurich University of Applied Sciences - ZHAW > School of Engineering > Phone: +41 58 934 70 63 > Skype: christof-marti From mach at zhaw.ch Tue Aug 19 14:01:23 2014 From: mach at zhaw.ch (Marti Christof (mach)) Date: Tue, 19 Aug 2014 12:01:23 +0000 Subject: [Fiware-miwi] weekly meeting today 14:00 CEST In-Reply-To: References: Message-ID: <16FD90A7-87E5-4E49-AAEE-CCC24050E642@zhaw.ch> hangout: https://plus.google.com/hangouts/_/gqwad5jmxlaroazkrwh37ssglua?hl=de minutes: https://docs.google.com/document/d/1zmiivRQLgbASrh1ne6PZaSwZy7ChwTQecwtskHOVVAY/edit Best regards Christof Am 19.08.2014 um 08:27 schrieb Marti Christof (mach) : > Hi > > We will have the meeting today 14:00 CEST. I will send a hangout link short before the meeting. > > Best regards > Christof > > Am 18.08.2014 um 15:35 schrieb Marti Christof (mach) : > >> Dear WP13 partners >> >> From Wednesday to Friday I will be on a retreat and not available for a meeting. >> Therefore I would like to reschedule the WP13 meeting to tomorrow (Tuesday Aug 19) afternoon. >> >> Because we have some important short term actions (see below), it would be good to have a representative of each partner in the meeting. To find the best slot please select all the possible entries in this doodle: http://doodle.com/66y6p552az54tcqv until today 19:00 CEST. I will send a final time based on the entries I have until then. >> >> Main topics of the meeting will be: >> - Creating the GEi catalogue entries (separate email follows) >> - Packaging for FI-LAB (separate email follows) & bundles >> - WP11 contributions (Market Analysis, Exploitation Plan, Standardization) >> - Participation on ECFI on Munich (Sept 17-18). Demo/Presentation >> - other topics like (admin, tracker & elearning) >> >> Best regards >> Christof >> ---- >> InIT Cloud Computing Lab >> Institut of Applied Information Technology - InIT >> Zurich University of Applied Sciences - ZHAW >> School of Engineering >> Phone: +41 58 934 70 63 >> Skype: christof-marti > From toni at playsign.net Tue Aug 19 18:33:26 2014 From: toni at playsign.net (Toni Alatalo) Date: Tue, 19 Aug 2014 19:33:26 +0300 Subject: [Fiware-miwi] Fwd: [Fiware-ge-owners] FILAB - Monitoring - aligning with Catalogue - request for action In-Reply-To: <143673b92b4540abaa9b245b4bff4e8a@DB4PR06MB489.eurprd06.prod.outlook.com> References: <143673b92b4540abaa9b245b4bff4e8a@DB4PR06MB489.eurprd06.prod.outlook.com> Message-ID: so what's the action to take here? should we fill in the missing license infos etc? it is in our catalogue draft also already at least. can we just add those infos to that sheet on our own? can we check the "Catalogue ?To Keep?" informations from somewhere? ---------- Forwarded message ---------- From: MANUEL ESCRICHE VICENTE Date: Tue, Aug 19, 2014 at 6:22 PM Subject: [Fiware-ge-owners] FILAB - Monitoring - aligning with Catalogue - request for action To: "fiware-ge-owners at lists.fi-ware.org" Cc: "fiware-wpl at lists.fi-ware.org" , "FI-WARE WPA (fiware-wpa at lists.fi-ware.org)" Dear Partners, Please, find below the FILAB-deployment monitoring report, which has been aligned with catalogue directives. FILAB Monitoring Report: https://forge.fi-ware.org/docman/view.php/27/4689/FILAB.monitoring.deployment.20140819.xlsx Catalogue: https://docs.google.com/spreadsheet/ccc?key=0AopQnlLhngy9dFVjQUJpLUFmYmVMbjVwbXFVRkstSXc#gid=0 The Key field in the report is FI-CORE Supported, whose value has been taken from the Catalogue Spreadsheet (?To Keep? columns). If FI-CORE supported holds NO, artefacts have to be removed from FILAB. The artefacts are in red colour. If FI-CORE supported hold YES, artefacts have to be provided to FILAB ? ?Missing items? in red colour is provided. If FI-CORE supported hold UNKNOWN, information found is provided with no assessment. It?s important to resolve this uncertainty AS SOON AS POSSIBLE since it prevent due right action. I hope you find it sound enough to take quick action both to provide due right artefacts, and/or to remove them from FILAB. Please, before taking any other action, check your FI-CORE supported field follows Catalogue ?To Keep? right. Henar, Nacho, ALL, if you find any difficulty or issue to interpret the report, please, me know Thanks for cooperation!! Kind regards, Manuel ---------------------------- Manuel Escriche Vicente Agile Project Manager/Leader FI-WARE Initiative Telef?nica Digital Parque Tecnol?gico C/ Abraham Zacuto, 10 47151 - Boecillo Valladolid - Spain Tfno: +34.91.312.99.72 Fax: +34.983.36.75.64 http://www.tid.es ________________________________ Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario, puede contener informaci?n privilegiada o confidencial y es para uso exclusivo de la persona o entidad de destino. Si no es usted. el destinatario indicado, queda notificado de que la lectura, utilizaci?n, divulgaci?n y/o copia sin autorizaci?n puede estar prohibida en virtud de la legislaci?n vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma v?a y proceda a su destrucci?n. The information contained in this transmission is privileged and confidential information intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this transmission in error, do not read it. Please immediately reply to the sender that you have received this communication in error and then delete it. Esta mensagem e seus anexos se dirigem exclusivamente ao seu destinat?rio, pode conter informa??o privilegiada ou confidencial e ? para uso exclusivo da pessoa ou entidade de destino. Se n?o ? vossa senhoria o destinat?rio indicado, fica notificado de que a leitura, utiliza??o, divulga??o e/ou c?pia sem autoriza??o pode estar proibida em virtude da legisla??o vigente. Se recebeu esta mensagem por erro, rogamos-lhe que nos o comunique imediatamente por esta mesma via e proceda a sua destrui??o _______________________________________________ Fiware-ge-owners mailing list Fiware-ge-owners at lists.fi-ware.org https://lists.fi-ware.org/listinfo/fiware-ge-owners From manuel.escrichevicente at telefonica.com Wed Aug 20 08:45:07 2014 From: manuel.escrichevicente at telefonica.com (MANUEL ESCRICHE VICENTE) Date: Wed, 20 Aug 2014 06:45:07 +0000 Subject: [Fiware-miwi] [Fiware-ge-owners] FILAB - Monitoring - aligning with Catalogue - request for action In-Reply-To: References: <143673b92b4540abaa9b245b4bff4e8a@DB4PR06MB489.eurprd06.prod.outlook.com> Message-ID: <415d7dab42874451abc4ade125bc205a@DB4PR06MB489.eurprd06.prod.outlook.com> Hi Toni, I think the first action for Web Tundra is to get defined whether Web Tundra is supported in FI-CORE. [cid:image001.png at 01CFBC51.6517B8A0] It depends on your WPL first. Christof, would you please react to this. I see there?re many UNKNOWNS in MiWi chapter. Is there any specific difficulty here? Toni, the action at your side, if your GEI were supported would be to provide a recipe at SVN server. This way FILAB admin team could make its deployment. If anything else, please, don?t hesitate to let me know. Kind regards, Manuel -----Original Message----- From: toni.alatalo at gmail.com [mailto:toni.alatalo at gmail.com] On Behalf Of Toni Alatalo Sent: martes, 19 de agosto de 2014 18:33 To: FI-WARE, MiWi; MANUEL ESCRICHE VICENTE Subject: Fwd: [Fiware-ge-owners] FILAB - Monitoring - aligning with Catalogue - request for action so what's the action to take here? should we fill in the missing license infos etc? it is in our catalogue draft also already at least. can we just add those infos to that sheet on our own? can we check the "Catalogue ?To Keep?" informations from somewhere? ---------- Forwarded message ---------- From: MANUEL ESCRICHE VICENTE > Date: Tue, Aug 19, 2014 at 6:22 PM Subject: [Fiware-ge-owners] FILAB - Monitoring - aligning with Catalogue - request for action To: "fiware-ge-owners at lists.fi-ware.org" > Cc: "fiware-wpl at lists.fi-ware.org" >, "FI-WARE WPA (fiware-wpa at lists.fi-ware.org)" > Dear Partners, Please, find below the FILAB-deployment monitoring report, which has been aligned with catalogue directives. FILAB Monitoring Report: https://forge.fi-ware.org/docman/view.php/27/4689/FILAB.monitoring.deployment.20140819.xlsx Catalogue: https://docs.google.com/spreadsheet/ccc?key=0AopQnlLhngy9dFVjQUJpLUFmYmVMbjVwbXFVRkstSXc#gid=0 The Key field in the report is FI-CORE Supported, whose value has been taken from the Catalogue Spreadsheet (?To Keep? columns). If FI-CORE supported holds NO, artefacts have to be removed from FILAB. The artefacts are in red colour. If FI-CORE supported hold YES, artefacts have to be provided to FILAB ? ?Missing items? in red colour is provided. If FI-CORE supported hold UNKNOWN, information found is provided with no assessment. It?s important to resolve this uncertainty AS SOON AS POSSIBLE since it prevent due right action. I hope you find it sound enough to take quick action both to provide due right artefacts, and/or to remove them from FILAB. Please, before taking any other action, check your FI-CORE supported field follows Catalogue ?To Keep? right. Henar, Nacho, ALL, if you find any difficulty or issue to interpret the report, please, me know Thanks for cooperation!! Kind regards, Manuel ---------------------------- Manuel Escriche Vicente Agile Project Manager/Leader FI-WARE Initiative Telef?nica Digital Parque Tecnol?gico C/ Abraham Zacuto, 10 47151 - Boecillo Valladolid - Spain Tfno: +34.91.312.99.72 Fax: +34.983.36.75.64 http://www.tid.es ________________________________ Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario, puede contener informaci?n privilegiada o confidencial y es para uso exclusivo de la persona o entidad de destino. Si no es usted. el destinatario indicado, queda notificado de que la lectura, utilizaci?n, divulgaci?n y/o copia sin autorizaci?n puede estar prohibida en virtud de la legislaci?n vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma v?a y proceda a su destrucci?n. The information contained in this transmission is privileged and confidential information intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this transmission in error, do not read it. Please immediately reply to the sender that you have received this communication in error and then delete it. Esta mensagem e seus anexos se dirigem exclusivamente ao seu destinat?rio, pode conter informa??o privilegiada ou confidencial e ? para uso exclusivo da pessoa ou entidade de destino. Se n?o ? vossa senhoria o destinat?rio indicado, fica notificado de que a leitura, utiliza??o, divulga??o e/ou c?pia sem autoriza??o pode estar proibida em virtude da legisla??o vigente. Se recebeu esta mensagem por erro, rogamos-lhe que nos o comunique imediatamente por esta mesma via e proceda a sua destrui??o _______________________________________________ Fiware-ge-owners mailing list Fiware-ge-owners at lists.fi-ware.org https://lists.fi-ware.org/listinfo/fiware-ge-owners ________________________________ Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario, puede contener informaci?n privilegiada o confidencial y es para uso exclusivo de la persona o entidad de destino. Si no es usted. el destinatario indicado, queda notificado de que la lectura, utilizaci?n, divulgaci?n y/o copia sin autorizaci?n puede estar prohibida en virtud de la legislaci?n vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma v?a y proceda a su destrucci?n. The information contained in this transmission is privileged and confidential information intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this transmission in error, do not read it. Please immediately reply to the sender that you have received this communication in error and then delete it. Esta mensagem e seus anexos se dirigem exclusivamente ao seu destinat?rio, pode conter informa??o privilegiada ou confidencial e ? para uso exclusivo da pessoa ou entidade de destino. Se n?o ? vossa senhoria o destinat?rio indicado, fica notificado de que a leitura, utiliza??o, divulga??o e/ou c?pia sem autoriza??o pode estar proibida em virtude da legisla??o vigente. Se recebeu esta mensagem por erro, rogamos-lhe que nos o comunique imediatamente por esta mesma via e proceda a sua destrui??o -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.png Type: image/png Size: 9012 bytes Desc: image001.png URL: From philipp.slusallek at dfki.de Thu Aug 21 05:22:50 2014 From: philipp.slusallek at dfki.de (Philipp Slusallek) Date: Thu, 21 Aug 2014 05:22:50 +0200 Subject: [Fiware-miwi] Fwd: Re: [Fiware-wpa] [Fiware-wpl] FI-WARE at ECFI Munich-block your agenda and responsibilities of WPL-WPA In-Reply-To: <79C5DE4D25832A49BAACBC6E798E3FDB0F8E1F@DEERLM99EX5MSX.ww931.my-it-solutions.net> References: <79C5DE4D25832A49BAACBC6E798E3FDB0F8E1F@DEERLM99EX5MSX.ww931.my-it-solutions.net> Message-ID: <53F5660A.2090906@dfki.de> Hi all, I am still in the US and have a hard time catching up with email, but this looks really important (see below for the original email rom Nuri). We have worked extensively with FI-C2 and WP13 to come up with a joint demo and I believe we are in a pretty good shape already. I would like to suggest that we organize a joint demo at ECFI between FI-C2 and FI-WARE based on the discussions we had in the past. This will be an ideal situation as it will most likely show the only fully integrated demo between the core and a use-case project (other than just using some GEs in UCs). BTW, this will also be the first larger use of the KIARA middleware and we might even think about integrating the IoT technology that they are talking about here (time permits). Would CyberLighting be interested in this? We may even be able to organize the two booths next to each other such that we could show our demo exactly at the intersection between the two. Please let me know if you see any issues with that. Otherwise I will propose this as described and keep you in the loop. Please respond by tomorrow evening. Best, Philipp -------- Weitergeleitete Nachricht -------- Betreff: Re: [Fiware-wpa] [Fiware-wpl] FI-WARE at ECFI Munich-block your agenda and responsibilities of WPL-WPA Datum: Tue, 19 Aug 2014 10:47:18 +0000 Von: De Lama Sanchez, Nuria An: Garino Pierangelo Kopie (CC): fiware-wpl at lists.fi-ware.org , fiware-wpa at lists.fi-ware.org Hi Pier, I understand the difficulties. Your chapter is indeed more difficult for the purpose of the demos and may not be needed in Munich. Let me explain a bit more. In the last edition of ECFI (Brussels) FI-WARE and a very nice stand but no content whatsoever in terms of demos and technical performance. For this new event this has to change dramatically because of two reasons: ? Our immediate customers will be there: SME and other users interested in testing FI-WARE plus the accelerators, which are in the end a network of multipliers in terms of users. They need to be convinced about the technology to be able to convince others. If we come there with illustrative demos and a lot of content they will not come to us to send FI-WARE representatives to each event in the coming weeks/months ? The EC will look very carefully at us there because FI-WARE has become the central piece of the programme (even more than before). Whatever work we show there will be useful for the review. There will also be journalists In any case, as said, the important thing is the presence of FI-WARE in general- What is expected? ? We are free to decide, but we will have a stand that will be there for almost 2 days. The idea is to organize an agenda of demos that will run periodically. These demos should illustrate on the one hand what can be done with FI-WARE (functionalities in the context of concrete applications) and on the other hand how to use the GE, for the technical audience. ? We will also have a slot of 80 'shared with XIFI for a demo (or several) in one of the stages. For this I think the most suitable approach is selecting the most promising demos of the cities involved in the project I hope this clarifies a bit more the expected role of FI-WARE there. You have to ensure that the right support from your chapter is there if we decide to include a demo that uses one of your GE. Best regards, Nuria From: Garino Pierangelo [mailto:pierangelo.garino at telecomitalia.it] Sent: Tuesday, August 19, 2014 12:25 PM To: De Lama Sanchez, Nuria Cc: MIGUEL CARRILLO PACHECO; fiware-wpa at lists.fi-ware.org; fiware-wpl at lists.fi-ware.org Subject: R: [Fiware-wpl] FI-WARE at ECFI Munich-block your agenda and responsibilities of WPL-WPA Dear Nuria, Concerning ECFI Munich, there is not a strict requirement for the presence of I2ND demos, according to the opinion expressed by Juanjo time ago during the WPL/WPA calls. Additionally I have to manage a private issue that appeared in the last couple of weeks, this is unfortunately during the same days of the conference therefore I cannot attend to the event. However, as Telecom Italia we are actively supporting one of the smart cities involved in FI-WARE, i.e. the Municipality of Torino through the partners TO-WL and POLITO, and I'm aware that Sergio asked them if they could provide a short presentation/demonstration of the developments they are doing with the FI-WARE GEis (in this case concerning the Data chapter). We spoke about the event organization during the WPL/WPA call yesterday, but it emerged that none of the people in call had a clear and definite idea of the format of the event, hence it becomes difficult to understand exactly what each should provide (including hence TO-WL and POLITO, who asked to me more info on it). Could you give us more details on what would be the expected contribution (per chapter, per 'application domain' e.g. smart cities, etc) for both the conference sessions and the stand? Many thanks and BR Pier Da: fiware-wpl-bounces at lists.fi-ware.org [mailto:fiware-wpl-bounces at lists.fi-ware.org] Per conto di De Lama Sanchez, Nuria Inviato: luned? 18 agosto 2014 11:10 A: MIGUEL CARRILLO PACHECO; fiware-wpa at lists.fi-ware.org; fiware-wpl at lists.fi-ware.org Oggetto: [Fiware-wpl] FI-WARE at ECFI Munich-block your agenda and responsibilities of WPL-WPA Priorit?: Alta Dear all, I hope you have enjoyed your holidays or you are still in the process of doing it... I would like to take advantage of this message to remind you that FI-WARE will have a unique and very important opportunity to show its results in the next edition of the ECFI event. ECFI will be held in Munich on the 17-18 September. FI-WARE is one of the organizing projects. See further info in http://www.ecfi.eu/munich2014/. FI-WARE will be present through several talks and especially through a demo stage and a stand- The audience will be people interested in FI in general but also-and this is extremely important- SMEs interested in using FI-WARE technologies and Accelerator projects of Phase 3. Therefore, our users/customers will be there expecting FI-WARE to show all the technology "at work". We need all WP Leaders and/or Architects to be present in Munich and prepare a demo. This had been anticipated by Juanjo. Miguel, could you please tackle this point in today's teleconference or at least prepare people to answer to my requests in the coming weeks? One option is havig a combined demo where we show the potential of using some GE as a bundle; another option is selecting several demo that illustrate how to use several GE of a technical chapter. In any case all WPs/chapter HAVE TO be there showing demos and guiding FI-WARE users on how to use our GE. I will be the coordinator for this. Your immediate tasks are: ? Think about your approach for the demo (how to illustrate the work of your WP thinking about the audience that I have described) ? Send me an initial description of the demo, duration and your specific technical requirements (I need to communicate them to the organizers) ? And of course, register to the event (there is a cheap ticket of 90 euro that includes both days and the dinner) ASAP. Thanks in advance, Nuria -----Original Message----- From: fiware-wpl-bounces at lists.fi-ware.org [mailto:fiware-wpl-bounces at lists.fi-ware.org] On Behalf Of MIGUEL CARRILLO PACHECO Sent: Monday, August 18, 2014 10:23 AM To: fiware-wpa at lists.fi-ware.org; fiware-wpl at lists.fi-ware.org Subject: [Fiware-wpl] See you at 11:00 Hi all, Just a quick reminder. Best regards, Miguel -- Please update your address book with my new e-mail address: miguel.carrillopacheco at telefonica.com ---------------------------------------------------------------------- _/ _/_/ Miguel Carrillo Pacheco _/ _/ _/ _/ Telef?nica Distrito Telef?nica _/ _/_/_/ _/ _/ Investigaci?n y Edifico Oeste 1, Planta 9 _/ _/ _/ _/ Desarrollo Ronda de la Comunicaci?n S/N _/ _/_/ 28050 Madrid (Spain) Tel: (+34) 91 483 26 77 e-mail: miguel.carrillopacheco at telefonica.com Follow FI-WARE on the net Website: http://www.fi-ware.org Facebook: http://www.facebook.com/pages/FI-WARE/251366491587242 Twitter: http://twitter.com/Fiware LinkedIn: http://www.linkedin.com/groups/FIWARE-4239932 ---------------------------------------------------------------------- ________________________________ Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario, puede contener informaci?n privilegiada o confidencial y es para uso exclusivo de la persona o entidad de destino. Si no es usted. el destinatario indicado, queda notificado de que la lectura, utilizaci?n, divulgaci?n y/o copia sin autorizaci?n puede estar prohibida en virtud de la legislaci?n vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma v?a y proceda a su destrucci?n. The information contained in this transmission is privileged and confidential information intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this transmission in error, do not read it. Please immediately reply to the sender that you have received this communication in error and then delete it. Esta mensagem e seus anexos se dirigem exclusivamente ao seu destinat?rio, pode conter informa??o privilegiada ou confidencial e ? para uso exclusivo da pessoa ou entidade de destino. Se n?o ? vossa senhoria o destinat?rio indicado, fica notificado de que a leitura, utiliza??o, divulga??o e/ou c?pia sem autoriza??o pode estar proibida em virtude da legisla??o vigente. Se recebeu esta mensagem por erro, rogamos-lhe que nos o comunique imediatamente por esta mesma via e proceda a sua destrui??o _______________________________________________ Fiware-wpl mailing list Fiware-wpl at lists.fi-ware.org https://lists.fi-ware.org/listinfo/fiware-wpl This e-mail and the documents attached are confidential and intended solely for the addressee; it may also be privileged. If you receive this e-mail in error, please notify the sender immediately and destroy it. As its integrity cannot be secured on the Internet, the Atos group liability cannot be triggered for the message content. Although the sender endeavors to maintain a computer virus-free network, the sender does not warrant that this transmission is virus-free and will not be liable for any damages resulting from any virus transmitted. Este mensaje y los ficheros adjuntos pueden contener informaci?n confidencial destinada solamente a la(s) persona(s) mencionadas anteriormente y pueden estar protegidos por secreto profesional. Si usted recibe este correo electr?nico por error, gracias por informar inmediatamente al remitente y destruir el mensaje. Al no estar asegurada la integridad de este mensaje sobre la red, Atos no se hace responsable por su contenido. Su contenido no constituye ning?n compromiso para el grupo Atos, salvo ratificaci?n escrita por ambas partes. Aunque se esfuerza al m?ximo por mantener su red libre de virus, el emisor no puede garantizar nada al respecto y no ser? responsable de cualesquiera da?os que puedan resultar de una transmisi?n de virus. Questo messaggio e i suoi allegati sono indirizzati esclusivamente alle persone indicate. La diffusione, copia o qualsiasi altra azione derivante dalla conoscenza di queste informazioni sono rigorosamente vietate. Qualora abbiate ricevuto questo documento per errore siete cortesemente pregati di darne immediata comunicazione al mittente e di provvedere alla sua distruzione, Grazie. This e-mail and any attachments is confidential and may contain privileged information intended for the addressee(s) only. Dissemination, copying, printing or use by anybody else is unauthorised. If you are not the intended recipient, please delete this message and any attachments and advise the sender by return e-mail, Thanks. [rispetta l'ambiente]Rispetta l'ambiente. Non stampare questa mail se non ? necessario. This e-mail and the documents attached are confidential and intended solely for the addressee; it may also be privileged. If you receive this e-mail in error, please notify the sender immediately and destroy it. As its integrity cannot be secured on the Internet, the Atos group liability cannot be triggered for the message content. Although the sender endeavors to maintain a computer virus-free network, the sender does not warrant that this transmission is virus-free and will not be liable for any damages resulting from any virus transmitted. Este mensaje y los ficheros adjuntos pueden contener informaci?n confidencial destinada solamente a la(s) persona(s) mencionadas anteriormente y pueden estar protegidos por secreto profesional. Si usted recibe este correo electr?nico por error, gracias por informar inmediatamente al remitente y destruir el mensaje. Al no estar asegurada la integridad de este mensaje sobre la red, Atos no se hace responsable por su contenido. Su contenido no constituye ning?n compromiso para el grupo Atos, salvo ratificaci?n escrita por ambas partes. Aunque se esfuerza al m?ximo por mantener su red libre de virus, el emisor no puede garantizar nada al respecto y no ser? responsable de cualesquiera da?os que puedan resultar de una transmisi?n de virus. -- ------------------------------------------------------------------------- Deutsches Forschungszentrum f?r K?nstliche Intelligenz (DFKI) GmbH Trippstadter Strasse 122, D-67663 Kaiserslautern Gesch?ftsf?hrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) Dr. Walter Olthoff Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes Sitz der Gesellschaft: Kaiserslautern (HRB 2313) USt-Id.Nr.: DE 148646973, Steuernummer: 19/673/0060/3 --------------------------------------------------------------------------- -------------- next part -------------- _______________________________________________ Fiware-wpa mailing list Fiware-wpa at lists.fi-ware.org https://lists.fi-ware.org/listinfo/fiware-wpa -------------- next part -------------- A non-text attachment was scrubbed... Name: philipp_slusallek.vcf Type: text/x-vcard Size: 441 bytes Desc: not available URL: From toni at playsign.net Thu Aug 21 08:12:57 2014 From: toni at playsign.net (Toni Alatalo) Date: Thu, 21 Aug 2014 09:12:57 +0300 Subject: [Fiware-miwi] Fwd: Re: [Fiware-wpa] [Fiware-wpl] FI-WARE at ECFI Munich-block your agenda and responsibilities of WPL-WPA In-Reply-To: <53F5660A.2090906@dfki.de> References: <79C5DE4D25832A49BAACBC6E798E3FDB0F8E1F@DEERLM99EX5MSX.ww931.my-it-solutions.net> <53F5660A.2090906@dfki.de> Message-ID: Hi - as you know we already have several demos on-line. BTW do we still lack the central place, gdoc or wiki page or something, to collect the links to them? Seems like a good way to prepare this .. to make such a collection a presentable demo web app or so? We can also work to select and config etc. to make relevant demos to good shape for this. And presentation materials if necessary. Actually just started work on a new / next step yesterday evening: testing automatic conversion of the new large oulu3dlive scene to better formats than the original ogre3d asssets which are currently in production use still. Result so far, with two nice blocks from near the market square: http://playsign.tklapp.com:8000/oulu3dlive/ Source repository for that: https://github.com/antont/oulu3dlive That's a test of using assimp's assimp2json tool. Using just ascii json now, not any optimized format (they go as zipped over http though). With the idea that the content pipeline could work so that modelers can save / export in any format that assimp supports well enough and then we could automatically get to a good format for the web (gltf, blast or so) from that. These ones are from FBXs saved from Max. Have your worked with the nice optimized & lodded etc. model formats recently and is there info somewhere about asset pipelines that work well for that / those? ~Toni On Thu, Aug 21, 2014 at 6:22 AM, Philipp Slusallek wrote: > Hi all, > > I am still in the US and have a hard time catching up with email, but > this looks really important (see below for the original email rom Nuri). > > We have worked extensively with FI-C2 and WP13 to come up with a joint > demo and I believe we are in a pretty good shape already. > > I would like to suggest that we organize a joint demo at ECFI between > FI-C2 and FI-WARE based on the discussions we had in the past. This will > be an ideal situation as it will most likely show the only fully > integrated demo between the core and a use-case project (other than just > using some GEs in UCs). > > BTW, this will also be the first larger use of the KIARA middleware and > we might even think about integrating the IoT technology that they are > talking about here (time permits). Would CyberLighting be interested in > this? > > We may even be able to organize the two booths next to each other such > that we could show our demo exactly at the intersection between the two. > > Please let me know if you see any issues with that. Otherwise I will > propose this as described and keep you in the loop. > > Please respond by tomorrow evening. > > > Best, > > Philipp > > > -------- Weitergeleitete Nachricht -------- > Betreff: Re: [Fiware-wpa] [Fiware-wpl] FI-WARE at ECFI Munich-block your > agenda and responsibilities of WPL-WPA > Datum: Tue, 19 Aug 2014 10:47:18 +0000 > Von: De Lama Sanchez, Nuria > An: Garino Pierangelo > Kopie (CC): fiware-wpl at lists.fi-ware.org , > fiware-wpa at lists.fi-ware.org > > Hi Pier, > > I understand the difficulties. Your chapter is indeed more difficult for > the purpose of the demos and may not be needed in Munich. Let me explain > a bit more. > > In the last edition of ECFI (Brussels) FI-WARE and a very nice stand but > no content whatsoever in terms of demos and technical performance. For > this new event this has to change dramatically because of two reasons: > > > ? Our immediate customers will be there: SME and other users > interested in testing FI-WARE plus the accelerators, which are in the > end a network of multipliers in terms of users. They need to be > convinced about the technology to be able to convince others. If we come > there with illustrative demos and a lot of content they will not come to > us to send FI-WARE representatives to each event in the coming weeks/months > > ? The EC will look very carefully at us there because FI-WARE > has become the central piece of the programme (even more than before). > Whatever work we show there will be useful for the review. There will > also be journalists > > In any case, as said, the important thing is the presence of FI-WARE in > general- What is expected? > > ? We are free to decide, but we will have a stand that will be > there for almost 2 days. The idea is to organize an agenda of demos that > will run periodically. These demos should illustrate on the one hand > what can be done with FI-WARE (functionalities in the context of > concrete applications) and on the other hand how to use the GE, for the > technical audience. > > ? We will also have a slot of 80 'shared with XIFI for a demo > (or several) in one of the stages. For this I think the most suitable > approach is selecting the most promising demos of the cities involved in > the project > > I hope this clarifies a bit more the expected role of FI-WARE there. > > You have to ensure that the right support from your chapter is there if > we decide to include a demo that uses one of your GE. > > Best regards, Nuria > > > > From: Garino Pierangelo [mailto:pierangelo.garino at telecomitalia.it] > Sent: Tuesday, August 19, 2014 12:25 PM > To: De Lama Sanchez, Nuria > Cc: MIGUEL CARRILLO PACHECO; fiware-wpa at lists.fi-ware.org; > fiware-wpl at lists.fi-ware.org > Subject: R: [Fiware-wpl] FI-WARE at ECFI Munich-block your agenda and > responsibilities of WPL-WPA > > Dear Nuria, > > Concerning ECFI Munich, there is not a strict requirement for the > presence of I2ND demos, according to the opinion expressed by Juanjo > time ago during the WPL/WPA calls. Additionally I have to manage a > private issue that appeared in the last couple of weeks, this is > unfortunately during the same days of the conference therefore I cannot > attend to the event. > However, as Telecom Italia we are actively supporting one of the smart > cities involved in FI-WARE, i.e. the Municipality of Torino through the > partners TO-WL and POLITO, and I'm aware that Sergio asked them if they > could provide a short presentation/demonstration of the developments > they are doing with the FI-WARE GEis (in this case concerning the Data > chapter). > > We spoke about the event organization during the WPL/WPA call yesterday, > but it emerged that none of the people in call had a clear and definite > idea of the format of the event, hence it becomes difficult to > understand exactly what each should provide (including hence TO-WL and > POLITO, who asked to me more info on it). > > Could you give us more details on what would be the expected > contribution (per chapter, per 'application domain' e.g. smart cities, > etc) for both the conference sessions and the stand? > > Many thanks and BR > Pier > > > > > Da: > fiware-wpl-bounces at lists.fi-ware.org > [mailto:fiware-wpl-bounces at lists.fi-ware.org] Per conto di De Lama > Sanchez, Nuria > Inviato: luned? 18 agosto 2014 11:10 > A: MIGUEL CARRILLO PACHECO; > fiware-wpa at lists.fi-ware.org; > fiware-wpl at lists.fi-ware.org > Oggetto: [Fiware-wpl] FI-WARE at ECFI Munich-block your agenda and > responsibilities of WPL-WPA > Priorit?: Alta > > > Dear all, > > > > I hope you have enjoyed your holidays or you are still in the process of > doing it... > > > > I would like to take advantage of this message to remind you that > FI-WARE will have a unique and very important opportunity to show its > results in the next edition of the ECFI event. > > > > ECFI will be held in Munich on the 17-18 September. FI-WARE is one of > the organizing projects. See further info in http://www.ecfi.eu/munich2014/. > > FI-WARE will be present through several talks and especially through a > demo stage and a stand- The audience will be people interested in FI in > general but also-and this is extremely important- SMEs interested in > using FI-WARE technologies and Accelerator projects of Phase 3. > Therefore, our users/customers will be there expecting FI-WARE to show > all the technology "at work". > > > > We need all WP Leaders and/or Architects to be present in Munich and > prepare a demo. This had been anticipated by Juanjo. > > > > Miguel, could you please tackle this point in today's teleconference or > at least prepare people to answer to my requests in the coming weeks? > > > > One option is havig a combined demo where we show the potential of using > some GE as a bundle; another option is selecting several demo that > illustrate how to use several GE of a technical chapter. > > In any case all WPs/chapter HAVE TO be there showing demos and guiding > FI-WARE users on how to use our GE. > > > > I will be the coordinator for this. Your immediate tasks are: > > ? Think about your approach for the demo (how to illustrate the > work of your WP thinking about the audience that I have described) > > ? Send me an initial description of the demo, duration and your > specific technical requirements (I need to communicate them to the > organizers) > > ? And of course, register to the event (there is a cheap ticket > of 90 euro that includes both days and the dinner) ASAP. > > > > > > Thanks in advance, Nuria > > > > > > > > -----Original Message----- > From: > fiware-wpl-bounces at lists.fi-ware.org > [mailto:fiware-wpl-bounces at lists.fi-ware.org] On Behalf Of MIGUEL > CARRILLO PACHECO > Sent: Monday, August 18, 2014 10:23 AM > To: fiware-wpa at lists.fi-ware.org; > fiware-wpl at lists.fi-ware.org > Subject: [Fiware-wpl] See you at 11:00 > > > > Hi all, > > > > Just a quick reminder. > > > > Best regards, > > > > Miguel > > > > -- > > > > Please update your address book with my new e-mail address: > miguel.carrillopacheco at telefonica.com > > > > ---------------------------------------------------------------------- > > _/ _/_/ Miguel Carrillo Pacheco > > _/ _/ _/ _/ Telef?nica Distrito Telef?nica > > _/ _/_/_/ _/ _/ Investigaci?n y Edifico Oeste 1, Planta 9 > > _/ _/ _/ _/ Desarrollo Ronda de la Comunicaci?n S/N > > _/ _/_/ 28050 Madrid (Spain) > > Tel: (+34) 91 483 26 77 > > > > e-mail: > miguel.carrillopacheco at telefonica.com > > > > Follow FI-WARE on the net > > > > Website: http://www.fi-ware.org > > Facebook: http://www.facebook.com/pages/FI-WARE/251366491587242 > > Twitter: http://twitter.com/Fiware > > LinkedIn: http://www.linkedin.com/groups/FIWARE-4239932 > > ---------------------------------------------------------------------- > > > > > > ________________________________ > > > > Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario, > puede contener informaci?n privilegiada o confidencial y es para uso > exclusivo de la persona o entidad de destino. Si no es usted. el > destinatario indicado, queda notificado de que la lectura, utilizaci?n, > divulgaci?n y/o copia sin autorizaci?n puede estar prohibida en virtud > de la legislaci?n vigente. Si ha recibido este mensaje por error, le > rogamos que nos lo comunique inmediatamente por esta misma v?a y proceda > a su destrucci?n. > > > > The information contained in this transmission is privileged and > confidential information intended only for the use of the individual or > entity named above. If the reader of this message is not the intended > recipient, you are hereby notified that any dissemination, distribution > or copying of this communication is strictly prohibited. If you have > received this transmission in error, do not read it. Please immediately > reply to the sender that you have received this communication in error > and then delete it. > > > > Esta mensagem e seus anexos se dirigem exclusivamente ao seu > destinat?rio, pode conter informa??o privilegiada ou confidencial e ? > para uso exclusivo da pessoa ou entidade de destino. Se n?o ? vossa > senhoria o destinat?rio indicado, fica notificado de que a leitura, > utiliza??o, divulga??o e/ou c?pia sem autoriza??o pode estar proibida em > virtude da legisla??o vigente. Se recebeu esta mensagem por erro, > rogamos-lhe que nos o comunique imediatamente por esta mesma via e > proceda a sua destrui??o _______________________________________________ > > Fiware-wpl mailing list > > Fiware-wpl at lists.fi-ware.org > > https://lists.fi-ware.org/listinfo/fiware-wpl > This e-mail and the documents attached are confidential and intended > solely for the addressee; it may also be privileged. If you receive this > e-mail in error, please notify the sender immediately and destroy it. > As its integrity cannot be secured on the Internet, the Atos group > liability cannot be triggered for the message content. Although the > sender endeavors to maintain a computer virus-free network, the sender > does not warrant that this transmission is virus-free and will not be > liable for any damages resulting from any virus transmitted. > > Este mensaje y los ficheros adjuntos pueden contener informaci?n > confidencial destinada solamente a la(s) persona(s) mencionadas > anteriormente y pueden estar protegidos por secreto profesional. > Si usted recibe este correo electr?nico por error, gracias por informar > inmediatamente al remitente y destruir el mensaje. > Al no estar asegurada la integridad de este mensaje sobre la red, Atos > no se hace responsable por su contenido. Su contenido no constituye > ning?n compromiso para el grupo Atos, salvo ratificaci?n escrita por > ambas partes. > Aunque se esfuerza al m?ximo por mantener su red libre de virus, el > emisor no puede garantizar nada al respecto y no ser? responsable de > cualesquiera da?os que puedan resultar de una transmisi?n de virus. > Questo messaggio e i suoi allegati sono indirizzati esclusivamente alle > persone indicate. La diffusione, copia o qualsiasi altra azione > derivante dalla conoscenza di queste informazioni sono rigorosamente > vietate. Qualora abbiate ricevuto questo documento per errore siete > cortesemente pregati di darne immediata comunicazione al mittente e di > provvedere alla sua distruzione, Grazie. > > This e-mail and any attachments is confidential and may contain > privileged information intended for the addressee(s) only. > Dissemination, copying, printing or use by anybody else is unauthorised. > If you are not the intended recipient, please delete this message and > any attachments and advise the sender by return e-mail, Thanks. > [rispetta l'ambiente]Rispetta l'ambiente. Non stampare questa mail se > non ? necessario. > > > This e-mail and the documents attached are confidential and intended > solely for the addressee; it may also be privileged. If you receive this > e-mail in error, please notify the sender immediately and destroy it. > As its integrity cannot be secured on the Internet, the Atos group > liability cannot be triggered for the message content. Although the > sender endeavors to maintain a computer virus-free network, the sender > does not warrant that this transmission is virus-free and will not be > liable for any damages resulting from any virus transmitted. > > Este mensaje y los ficheros adjuntos pueden contener informaci?n > confidencial destinada solamente a la(s) persona(s) mencionadas > anteriormente y pueden estar protegidos por secreto profesional. > Si usted recibe este correo electr?nico por error, gracias por informar > inmediatamente al remitente y destruir el mensaje. > Al no estar asegurada la integridad de este mensaje sobre la red, Atos > no se hace responsable por su contenido. Su contenido no constituye > ning?n compromiso para el grupo Atos, salvo ratificaci?n escrita por > ambas partes. > Aunque se esfuerza al m?ximo por mantener su red libre de virus, el > emisor no puede garantizar nada al respecto y no ser? responsable de > cualesquiera da?os que puedan resultar de una transmisi?n de virus. > > > -- > > ------------------------------------------------------------------------- > Deutsches Forschungszentrum f?r K?nstliche Intelligenz (DFKI) GmbH > Trippstadter Strasse 122, D-67663 Kaiserslautern > > Gesch?ftsf?hrung: > Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) > Dr. Walter Olthoff > Vorsitzender des Aufsichtsrats: > Prof. Dr. h.c. Hans A. Aukes > > Sitz der Gesellschaft: Kaiserslautern (HRB 2313) > USt-Id.Nr.: DE 148646973, Steuernummer: 19/673/0060/3 > --------------------------------------------------------------------------- > > > > _______________________________________________ > Fiware-miwi mailing list > Fiware-miwi at lists.fi-ware.org > https://lists.fi-ware.org/listinfo/fiware-miwi > From mach at zhaw.ch Wed Aug 27 08:19:04 2014 From: mach at zhaw.ch (Marti Christof (mach)) Date: Wed, 27 Aug 2014 06:19:04 +0000 Subject: [Fiware-miwi] weekly meeting agenda/minutes Message-ID: <6CE8B62B-8221-4AAE-B039-2D86D98EC939@zhaw.ch> Hi I prepared the agenda and minutes: https://docs.google.com/document/d/1U6Vv912pbXZOn08RGatMQWkX7-LVcD_2fNp33q3Hawo/edit Hangout: https://plus.google.com/hangouts/_/gyknhzxc2zclwtfagl2tjhtvz4a?hl=de Some important topics this week: - ECFI Munich (demos) - Status Catalog entries - Status recipes/cookbooks etc. See you soon. Christof ---- InIT Cloud Computing Lab - ICCLab http://cloudcomp.ch Institut of Applied Information Technology - InIT Zurich University of Applied Sciences - ZHAW School of Engineering Phone: +41 58 934 70 63 Skype: christof-marti From torsten.spieldenner at dfki.de Wed Aug 27 08:57:11 2014 From: torsten.spieldenner at dfki.de (Torsten Spieldenner) Date: Wed, 27 Aug 2014 08:57:11 +0200 Subject: [Fiware-miwi] Fwd: DFKI ECFI Demo In-Reply-To: <53FC4F1B.4020706@dfki.de> References: <53FC4F1B.4020706@dfki.de> Message-ID: <53FD8147.6040508@dfki.de> Hello, we at DFKI are planning an integrated demo for ECFI that uses Synchronization and 3D-UI-XML3D among other GE, like GIS Data Provider and possibly POI. The idea is to provide a virtual campus map that can be explored by users that are represented by avatars. I've uploaded a demonstration how this may look like to the Testbed: http://130.206.80.161/fives-client/client.xhtml The demo looks like this: You may enter any arbitrary username and ignore the password field for login. The demo may run a bit laggy when accessed from the testbed, but runs perfectly fine when installed on local servers. The testbed version uses the campus of Saarland University with no building data. As ECFI is located in Munich, it would be great if we could have data of Munich, together with building data, available. @Jarkko: Is it possible to set up a GIS Data Provider instance that serves Munich, or even all of Germany, with building data of Munich campus for the ECFI demo? Stefan may be able to give more information which data is exactly needed. @Ari: We are also thinking about adding a set of POIs located on the campus area that is then visualized within the 3D representation. Would it be possible to provide a POI Data Provider instance with a set POI together with an XML3D visualization for the area of the campus? Thanks a lot and best regards, Torsten -- Torsten Spieldenner, M.Sc. Tel.: +49 6 81 / 8 57 75 - 77 48 Fax.: +49 6 81 / 8 57 75 - 22 35 Internet:http://www.dfki.de/web/forschung/asr/ ------------------------------------------------------------- Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH Trippstadter Strasse 122, D-67663 Kaiserslautern, Germany Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) Dr. Walter Olthoff Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes Amtsgericht Kaiserslautern, HRB 2313 ------------------------------------------------------------- -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 110495 bytes Desc: not available URL: From erno at playsign.net Wed Aug 27 09:09:43 2014 From: erno at playsign.net (Erno Kuusela) Date: Wed, 27 Aug 2014 10:09:43 +0300 Subject: [Fiware-miwi] WebTundra fi-lab and chef recipe: story so far Message-ID: <20140827070943.GG8543@ee.oulu.fi> Hello, In last weekly there was talk about sharing these. Here's how far I've got: 0) Requested and eventually got an account to http://130.206.80.61/ (per instructions in minutes) 1) Followed general patterns in http://forge.fi-ware.org/plugins/mediawiki/wiki/fiware/index.php/How_to_create_recipes_for_the_GEs (At some point realized that this vm management UI is just the standard OpenStack one, lot of info on the web.) for chef specific things, the googel doc doc was better, https://docs.google.com/document/d/1r-CBmWbGjh0p_EPoxTz26xJGWe5Z8zpYGQ9uZvVwc1A/edit?pli=1 (and also chef material on the web) 2) create keypair in openstack ui 3) Launch an instance by going to "images" tab and selecting one. There's no image matching the name in wiki ("paas-chef-solo-templ"), I used the Ubuntu-chef image instead. Instance creation didn't work first time around (sometime last week, status just showed "error" and nothing in log), but today it worked. 4) edit security groups. The "From port" and "to port" in the ui means the start and end of a port range, not source and destination ports. Also -1 seems to be code for "any". To get working TCP you have to pass ICMP unreachables for PMTU discovery, so add ICMP -1 -1 0.0.0.0/0 in addition to your TCP ports. 5) allocate public IP for your instance. The UI hanged every time for me. But when trying to allocate from the second (not default) net8100 pool the IP was eventually allocated when I reloaded the UI. Assigning this to my instance worked OK. (ideally create volumes and containers here, but their creation didn't work) 6) no dns is provided, i put it under our own domain as fi-vm1.playsign.net 7) connect using something like ssh -l root -i ~/src/fiware/filab/erno-filab-keypair.pem fi-vm1.playsign.net 8) install latest security patches (apt-get update && apt-get dist-upgrade && reboot) 9) see that chef bits are already installed (chef-solo and chef-client). Here i decided to do also the recipe development work on the vm (usually that's on your workstation). So on the vm intiialize a recipe template (knife create webtundra) 10) filled out the README and metadata and put recipe in recipes/default.rb, made a test.json with run_list containing "recipe[webtundra]", and tested using chef-solo -j test.json. after a few trial and errors I had the WebTundra zip downloaded and unpacked under web root, and dependency packages (unzip, apache2) working in the recipe. 11) Following the google doc I moved the installation part from default.rb into 1.0.0_install.rb and made additional corresponding start/stop/uninstall recipes. 12) This fiware-required format no longer works with chef-solo (at least I didn't immediately see how to run without a default recipe). But there should be an automated testing system in fi-lab chef servers, so according to the howto in the wiki I up loaded the recipe to the svn. You can see the recipe in svn (under GESoftware/webtundra/). 13) I didn't yet find out where I can request an user account to the auto-testing chef server.... From arto.heikkinen at cie.fi Wed Aug 27 12:08:24 2014 From: arto.heikkinen at cie.fi (Arto Heikkinen) Date: Wed, 27 Aug 2014 13:08:24 +0300 Subject: [Fiware-miwi] Some additional notes on working with Chef recipes in Testbed Message-ID: <53FDAE18.4000606@cie.fi> Hi all, In today's meeting I promised to share some notes I've learned while working with the Chef Cookbooks and Recipes. So here it is, hope this helps a bit: *Some additional notes on creating Chef recipes in FI-WARE Testbed* * The person to ask for help and assistance is HENAR MU?OZ FRUTOS (henar.munozfrutos at telefonica.com) -She can also provide the user account for the test Chef server * You may need to install Chef yourself, as there is only a limited set of different Linux distribution VM images provided in the testbed where Chef is pre-installed - Easiest way is to execute the following command in your VM (as root): curl -L https://www.opscode.com/chef/install.sh | bash * Easiest way to test-run a single recipe is to use chef-apply command: chef-apply name_of_recipefile.rb * How to upload your cookbook to the svn: 1. svn checkout https://forge.fi-ware.org/scmrepos/svn/testbed/trunk/cookbooks 2. copy your cookbook folder under cookbooks/GESoftware 3. cd cookbooks 4. svn add GESoftware/your_cookbook_folder 5. svn commit --username your_forge_username NOTE that the cookbook will not appear immediately to the Chef server, apparently there is a daily cron-run that updates the cookbooks from the svn to the Chef server. You can also ask Henar to upload them manually to the Chef server. -Arto -- _______________________________________________________ Arto Heikkinen, Doctoral student, M.Sc. (Eng.) Center for Internet Excellence (CIE) P.O. BOX 1001, FIN-90014 University of Oulu, Finland e-mail: arto.heikkinen at cie.fi, http://www.cie.fi -------------- next part -------------- An HTML attachment was scrubbed... URL: From torsten.spieldenner at dfki.de Thu Aug 28 11:10:50 2014 From: torsten.spieldenner at dfki.de (Torsten Spieldenner) Date: Thu, 28 Aug 2014 11:10:50 +0200 Subject: [Fiware-miwi] DFKI ECFI Demo In-Reply-To: References: <53FC4F1B.4020706@dfki.de> Message-ID: <53FEF21A.8030500@dfki.de> Hello, actually, elevation data is not important. We are currently planning flat ground tiles as also shown in the example. The building data should publicly available from Bing Maps, same for nice satellite images. @Stefan: Feel free to clarify this further if I am talking non-sense here ;) Also the region of TU Munich, where ECFI will take place, would be sufficient. Best, Torsten Am 8/27/2014 8:47 AM, schrieb Jarkko Vatjus-Anttila: > Hello, > > Regarding for the German data I think that could be pulled from the > SRTM data set. The elevation there is with 30m grid spacing, so it is > not the most accurate data but at least it is free. Aerial images are > uncertain whether they are available, and the same applies to the > building information. > > In Finland our geographical institute provides the data for free, but > do you have any information are the similar instances in Germany? That > would help a lot. > > - jarkko > > > On Tue, Aug 26, 2014 at 12:10 PM, Torsten Spieldenner > > wrote: > > Hello, > > we at DFKI are planning an integrated demo for ECFI that uses > Synchronization and 3D-UI-XML3D among other GE, like GIS Data > Provider and possibly POI. > The idea is to provide a virtual campus map that can be explored > by users that are represented by avatars. I've uploaded a > demonstration how this may look like to the Testbed: > > http://130.206.80.161/fives-client/client.xhtml > > The demo looks like this: > > > > You may enter any arbitrary username and ignore the password field > for login. The demo may run a bit laggy when accessed from the > testbed, but runs perfectly fine when installed on local servers. > > The testbed version uses the campus of Saarland University with no > building data. > As ECFI is located in Munich, it would be great if we could have > data of Munich, together with building data, available. > > @Jarkko: Is it possible to set up a GIS Data Provider instance > that serves Munich, or even all of Germany, with building data of > Munich campus for the ECFI demo? Stefan may be able to give more > information which data is exactly needed. > > @Ari: We are also thinking about adding a set of POIs located on > the campus area that is then visualized within the 3D > representation. Would it be possible to provide a POI Data > Provider instance with a set POI together with an XML3D > visualization for the area of the campus? > > Thanks a lot and best regards, > Torsten > > -- > Torsten Spieldenner, M.Sc. > > Tel.: +49 6 81 / 8 57 75 - 77 48 > Fax.: +49 6 81 / 8 57 75 - 22 35 > > Internet:http://www.dfki.de/web/forschung/asr/ > > ------------------------------------------------------------- > Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH > Trippstadter Strasse 122, D-67663 Kaiserslautern, Germany > > Geschaeftsfuehrung: > Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) > Dr. Walter Olthoff > > Vorsitzender des Aufsichtsrats: > Prof. Dr. h.c. Hans A. Aukes > > Amtsgericht Kaiserslautern, HRB 2313 > ------------------------------------------------------------- > > > > > -- > Jarkko Vatjus-Anttila > CTO > Cyberlightning Ltd. > > mobile. +358 405245142 > email. jarkko at cyberlightning.com > > See our new press release: > http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ > > www.cyberlightning.com > > This e-mail and all attached material are confidential and may contain > legally privileged information. If you are not the intended recipient, > please contact the sender and delete the e-mail from your system > without producing, distributing or retaining copies thereof. -- Torsten Spieldenner, M.Sc. Tel.: +49 6 81 / 8 57 75 - 77 48 Fax.: +49 6 81 / 8 57 75 - 22 35 Internet: http://www.dfki.de/web/forschung/asr/ ------------------------------------------------------------- Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH Trippstadter Strasse 122, D-67663 Kaiserslautern, Germany Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) Dr. Walter Olthoff Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes Amtsgericht Kaiserslautern, HRB 2313 ------------------------------------------------------------- -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 110495 bytes Desc: not available URL: From jarkko at cyberlightning.com Thu Aug 28 11:40:38 2014 From: jarkko at cyberlightning.com (Jarkko Vatjus-Anttila) Date: Thu, 28 Aug 2014 12:40:38 +0300 Subject: [Fiware-miwi] DFKI ECFI Demo In-Reply-To: <53FEF21A.8030500@dfki.de> References: <53FC4F1B.4020706@dfki.de> <53FEF21A.8030500@dfki.de> Message-ID: Hello, We dug this a little bit more. Elevation is available from SRTM set, but with 90m grid resolution. So it would be very poor. Like you said, we can replace the elevation with zeroes, hence producing artificial flat terrain. There are no buildings available as far as we know. Some could be retrieved for testing from Open streetmap, but that requires some programming and will not be a single day task. We may look at this approach as well, though. Aerial images are available some instance in Germany, I guess it is similar to Finnish geographical institute, but they say in their web page we'd need to contact "Dienstleistungszentrum" before receiving the material. < http://www.bkg.bund.de/nn_159816/EN/FederalOffice/Products/Geo-Data/Geo__Data__node.html__nnn=true > So, in summary: if you can point us to data in Germany, we'd be able to go forward faster. Entschuldigen sie bitte aber wir sprechen nicht Deutsch. :) - jarkko On Thu, Aug 28, 2014 at 12:10 PM, Torsten Spieldenner < torsten.spieldenner at dfki.de> wrote: > Hello, > > actually, elevation data is not important. We are currently planning flat > ground tiles as also shown in the example. The building data should > publicly available from Bing Maps, same for nice satellite images. > > @Stefan: Feel free to clarify this further if I am talking non-sense here > ;) > > Also the region of TU Munich, where ECFI will take place, would be > sufficient. > > Best, > Torsten > > Am 8/27/2014 8:47 AM, schrieb Jarkko Vatjus-Anttila: > > Hello, > > Regarding for the German data I think that could be pulled from the SRTM > data set. The elevation there is with 30m grid spacing, so it is not the > most accurate data but at least it is free. Aerial images are uncertain > whether they are available, and the same applies to the building > information. > > In Finland our geographical institute provides the data for free, but do > you have any information are the similar instances in Germany? That would > help a lot. > > - jarkko > > > On Tue, Aug 26, 2014 at 12:10 PM, Torsten Spieldenner < > torsten.spieldenner at dfki.de> wrote: > >> Hello, >> >> we at DFKI are planning an integrated demo for ECFI that uses >> Synchronization and 3D-UI-XML3D among other GE, like GIS Data Provider and >> possibly POI. >> The idea is to provide a virtual campus map that can be explored by users >> that are represented by avatars. I've uploaded a demonstration how this may >> look like to the Testbed: >> >> http://130.206.80.161/fives-client/client.xhtml >> >> The demo looks like this: >> >> >> >> You may enter any arbitrary username and ignore the password field for >> login. The demo may run a bit laggy when accessed from the testbed, but >> runs perfectly fine when installed on local servers. >> >> The testbed version uses the campus of Saarland University with no >> building data. >> As ECFI is located in Munich, it would be great if we could have data of >> Munich, together with building data, available. >> >> @Jarkko: Is it possible to set up a GIS Data Provider instance that >> serves Munich, or even all of Germany, with building data of Munich campus >> for the ECFI demo? Stefan may be able to give more information which data >> is exactly needed. >> >> @Ari: We are also thinking about adding a set of POIs located on the >> campus area that is then visualized within the 3D representation. Would it >> be possible to provide a POI Data Provider instance with a set POI together >> with an XML3D visualization for the area of the campus? >> >> Thanks a lot and best regards, >> Torsten >> >> -- >> Torsten Spieldenner, M.Sc. >> >> Tel.: +49 6 81 / 8 57 75 - 77 48 >> Fax.: +49 6 81 / 8 57 75 - 22 35 >> >> Internet: http://www.dfki.de/web/forschung/asr/ >> >> ------------------------------------------------------------- >> Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH >> Trippstadter Strasse 122, D-67663 Kaiserslautern, Germany >> >> Geschaeftsfuehrung: >> Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) >> Dr. Walter Olthoff >> >> Vorsitzender des Aufsichtsrats: >> Prof. Dr. h.c. Hans A. Aukes >> >> Amtsgericht Kaiserslautern, HRB 2313 >> ------------------------------------------------------------- >> >> > > > -- > Jarkko Vatjus-Anttila > CTO > Cyberlightning Ltd. > > mobile. +358 405245142 > email. jarkko at cyberlightning.com > > See our new press release: > http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ > > www.cyberlightning.com > > This e-mail and all attached material are confidential and may contain > legally privileged information. If you are not the intended recipient, > please contact the sender and delete the e-mail from your system without > producing, distributing or retaining copies thereof. > > > > -- > Torsten Spieldenner, M.Sc. > > Tel.: +49 6 81 / 8 57 75 - 77 48 > Fax.: +49 6 81 / 8 57 75 - 22 35 > > Internet: http://www.dfki.de/web/forschung/asr/ > > ------------------------------------------------------------- > Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH > Trippstadter Strasse 122, D-67663 Kaiserslautern, Germany > > Geschaeftsfuehrung: > Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) > Dr. Walter Olthoff > > Vorsitzender des Aufsichtsrats: > Prof. Dr. h.c. Hans A. Aukes > > Amtsgericht Kaiserslautern, HRB 2313 > ------------------------------------------------------------- > > -- Jarkko Vatjus-Anttila CTO Cyberlightning Ltd. mobile. +358 405245142 email. jarkko at cyberlightning.com See our new press release: http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ www.cyberlightning.com This e-mail and all attached material are confidential and may contain legally privileged information. If you are not the intended recipient, please contact the sender and delete the e-mail from your system without producing, distributing or retaining copies thereof. -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 110495 bytes Desc: not available URL: From torsten.spieldenner at dfki.de Thu Aug 28 13:26:04 2014 From: torsten.spieldenner at dfki.de (Torsten Spieldenner) Date: Thu, 28 Aug 2014 13:26:04 +0200 Subject: [Fiware-miwi] WebTundra fi-lab and chef recipe: story so far In-Reply-To: <20140827070943.GG8543@ee.oulu.fi> References: <20140827070943.GG8543@ee.oulu.fi> Message-ID: <53FF11CC.3040900@dfki.de> Thank you very much, this summary was very helpful. In the meantime I also managed to create a recipe for 3d-ui-xml3d and added it to the SVN. Regarding step 12): > 12) This fiware-required format no longer works with chef-solo (at least > I didn't immediately see how to run without a default recipe). You can specify which recipe should be used in the run_list by the "::" operator, e.g.: file 'install.js' contains { "run_list" : "recipe[xml3d::3.3.3_install]" }, then chef-solo -j install.js will run the 3.3.3_install.rb recipe from the recipes - folder. ~ Torsten -- Torsten Spieldenner, M.Sc. Tel.: +49 6 81 / 8 57 75 - 77 48 Fax.: +49 6 81 / 8 57 75 - 22 35 Internet: http://www.dfki.de/web/forschung/asr/ ------------------------------------------------------------- Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH Trippstadter Strasse 122, D-67663 Kaiserslautern, Germany Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) Dr. Walter Olthoff Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes Amtsgericht Kaiserslautern, HRB 2313 ------------------------------------------------------------- From torsten.spieldenner at dfki.de Fri Aug 29 09:03:45 2014 From: torsten.spieldenner at dfki.de (Torsten Spieldenner) Date: Fri, 29 Aug 2014 09:03:45 +0200 Subject: [Fiware-miwi] DFKI ECFI Demo In-Reply-To: References: <53FC4F1B.4020706@dfki.de> <53FEF21A.8030500@dfki.de> Message-ID: <540025D1.1090808@dfki.de> Hello, I talked to Stefan again, and the most important part seems to be only the building data, thus, the points from which the extruded buildings could be generated. As for elevation, also the satellite data does not need to be considered at this point. So if the GIS-provider could provide this building data fur TU Campus in Munich in a format that allows to create extruded buildings in XML3D representation - or even the extruded buildings directly - , this would be awesome. ~ Torsten Am 8/28/2014 11:40 AM, schrieb Jarkko Vatjus-Anttila: > Hello, > > We dug this a little bit more. > > Elevation is available from SRTM set, but with 90m grid resolution. So > it would be very poor. Like you said, we can replace the elevation > with zeroes, hence producing artificial flat terrain. > > There are no buildings available as far as we know. Some could be > retrieved for testing from Open streetmap, but that requires some > programming and will not be a single day task. We may look at this > approach as well, though. > > Aerial images are available some instance in Germany, I guess it is > similar to Finnish geographical institute, but they say in their web > page we'd need to contact "Dienstleistungszentrum" before receiving > the material. > > > So, in summary: if you can point us to data in Germany, we'd be able > to go forward faster. Entschuldigen sie bitte aber wir sprechen nicht > Deutsch. :) > > - jarkko > > > On Thu, Aug 28, 2014 at 12:10 PM, Torsten Spieldenner > > wrote: > > Hello, > > actually, elevation data is not important. We are currently > planning flat ground tiles as also shown in the example. The > building data should publicly available from Bing Maps, same for > nice satellite images. > > @Stefan: Feel free to clarify this further if I am talking > non-sense here ;) > > Also the region of TU Munich, where ECFI will take place, would be > sufficient. > > Best, > Torsten > > Am 8/27/2014 8:47 AM, schrieb Jarkko Vatjus-Anttila: >> Hello, >> >> Regarding for the German data I think that could be pulled from >> the SRTM data set. The elevation there is with 30m grid spacing, >> so it is not the most accurate data but at least it is free. >> Aerial images are uncertain whether they are available, and the >> same applies to the building information. >> >> In Finland our geographical institute provides the data for free, >> but do you have any information are the similar instances in >> Germany? That would help a lot. >> >> - jarkko >> >> >> On Tue, Aug 26, 2014 at 12:10 PM, Torsten Spieldenner >> > > wrote: >> >> Hello, >> >> we at DFKI are planning an integrated demo for ECFI that uses >> Synchronization and 3D-UI-XML3D among other GE, like GIS Data >> Provider and possibly POI. >> The idea is to provide a virtual campus map that can be >> explored by users that are represented by avatars. I've >> uploaded a demonstration how this may look like to the Testbed: >> >> http://130.206.80.161/fives-client/client.xhtml >> >> The demo looks like this: >> >> >> >> You may enter any arbitrary username and ignore the password >> field for login. The demo may run a bit laggy when accessed >> from the testbed, but runs perfectly fine when installed on >> local servers. >> >> The testbed version uses the campus of Saarland University >> with no building data. >> As ECFI is located in Munich, it would be great if we could >> have data of Munich, together with building data, available. >> >> @Jarkko: Is it possible to set up a GIS Data Provider >> instance that serves Munich, or even all of Germany, with >> building data of Munich campus for the ECFI demo? Stefan may >> be able to give more information which data is exactly needed. >> >> @Ari: We are also thinking about adding a set of POIs located >> on the campus area that is then visualized within the 3D >> representation. Would it be possible to provide a POI Data >> Provider instance with a set POI together with an XML3D >> visualization for the area of the campus? >> >> Thanks a lot and best regards, >> Torsten >> >> -- >> Torsten Spieldenner, M.Sc. >> >> Tel.: +49 6 81 / 8 57 75 - 77 48 >> Fax.: +49 6 81 / 8 57 75 - 22 35 >> >> Internet:http://www.dfki.de/web/forschung/asr/ >> >> ------------------------------------------------------------- >> Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH >> Trippstadter Strasse 122, D-67663 Kaiserslautern, Germany >> >> Geschaeftsfuehrung: >> Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) >> Dr. Walter Olthoff >> >> Vorsitzender des Aufsichtsrats: >> Prof. Dr. h.c. Hans A. Aukes >> >> Amtsgericht Kaiserslautern, HRB 2313 >> ------------------------------------------------------------- >> >> >> >> >> -- >> Jarkko Vatjus-Anttila >> CTO >> Cyberlightning Ltd. >> >> mobile. +358 405245142 >> email. jarkko at cyberlightning.com >> >> See our new press release: >> http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ >> >> www.cyberlightning.com >> >> This e-mail and all attached material are confidential and may >> contain legally privileged information. If you are not the >> intended recipient, please contact the sender and delete the >> e-mail from your system without producing, distributing or >> retaining copies thereof. > > > -- > Torsten Spieldenner, M.Sc. > > Tel.: +49 6 81 / 8 57 75 - 77 48 > Fax.: +49 6 81 / 8 57 75 - 22 35 > > Internet:http://www.dfki.de/web/forschung/asr/ > > ------------------------------------------------------------- > Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH > Trippstadter Strasse 122, D-67663 Kaiserslautern, Germany > > Geschaeftsfuehrung: > Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) > Dr. Walter Olthoff > > Vorsitzender des Aufsichtsrats: > Prof. Dr. h.c. Hans A. Aukes > > Amtsgericht Kaiserslautern, HRB 2313 > ------------------------------------------------------------- > > > > > -- > Jarkko Vatjus-Anttila > CTO > Cyberlightning Ltd. > > mobile. +358 405245142 > email. jarkko at cyberlightning.com > > See our new press release: > http://cyberlightning.com/blog/2014/05/13/cyberlightning-brings-3d-visualization-to-industrial-internet-of-things/ > > www.cyberlightning.com > > This e-mail and all attached material are confidential and may contain > legally privileged information. If you are not the intended recipient, > please contact the sender and delete the e-mail from your system > without producing, distributing or retaining copies thereof. -- Torsten Spieldenner, M.Sc. Tel.: +49 6 81 / 8 57 75 - 77 48 Fax.: +49 6 81 / 8 57 75 - 22 35 Internet: http://www.dfki.de/web/forschung/asr/ ------------------------------------------------------------- Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH Trippstadter Strasse 122, D-67663 Kaiserslautern, Germany Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) Dr. Walter Olthoff Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes Amtsgericht Kaiserslautern, HRB 2313 ------------------------------------------------------------- -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 110495 bytes Desc: not available URL: From mach at zhaw.ch Fri Aug 29 12:09:15 2014 From: mach at zhaw.ch (Marti Christof (mach)) Date: Fri, 29 Aug 2014 10:09:15 +0000 Subject: [Fiware-miwi] ECFI Demo description & participants In-Reply-To: References: Message-ID: Hi Toni & all WP13 partners Would be really sad, if nobody could represent and demo WebTundra at the ECFI. It is an important event for FIWARE (the brand) to kick-off phase 3 of the FI-PPP and I guess many representatives of accelerators will be there too. This week I canceled and delegated my events on Sept 17/18, to be able to attend ECFI. Worst case I could give the demo, but I really prefer to have somebody there working with it on a day to day basis, who knows the detailed capabilities of Webtundra and also can answer/discuss more complex developer questions. Budget-wise I think it could also be booked on FI-Core, because it starts in September and one of the main goals of FI-Core is Demonstration and Developer training/support. I try to clarify this with Telefonica. I send this to the whole MIWI list, because I hope somebody can step in. (Maybe somebody wants to combine it with a private visit of the Oktoberfest, which starts the following weekend 20th September :) ) Best regards Christof Am 29.08.2014 um 10:46 schrieb Toni Alatalo : > Hi - so far we've found no one that could travel, there's no travel > budgets in the projects for this (fi-ware had very little, most went > to the kickoff, and on the fi-core side the kickoff is just before > this Munich event). And I understood (from you in the weekly) that if > no one can come we can not demo either :/ > > On Fri, Aug 29, 2014 at 11:26 AM, Marti Christof (mach) wrote: >> Hi Toni >> >> Torsten has sent me the following description of the DFKI ECFI demo: https://docs.google.com/document/d/10z4Btr_NAHQ8lKyz9qiDEV6JRB714hhR-ZA5pfw9HC8/edit?usp=sharing >> >> Can you please create a similar description for the WebTundra Demo until noon? >> We also need to specify the target audience ?general public or developers?" >> In addition I need to know the responsible/presenting person (&partner) and a list of participants from Finnland. >> >> Best regards >> Christof >> ---- >> InIT Cloud Computing Lab - ICCLab >> Institut of Applied Information Technology - InIT >> Zurich University of Applied Sciences - ZHAW >> School of Engineering >> Phone: +41 58 934 70 63 >> Skype: christof-marti From toni at playsign.net Fri Aug 29 12:38:24 2014 From: toni at playsign.net (Toni Alatalo) Date: Fri, 29 Aug 2014 13:38:24 +0300 Subject: [Fiware-miwi] ECFI Demo description & participants In-Reply-To: References: Message-ID: Hi Christof and thank you for helping with this. I understood that also in fi-core there's not much travel budget, possibly only for the kickoff? Just from what Tiina said, will check with her more. On Fri, Aug 29, 2014 at 1:09 PM, Marti Christof (mach) wrote: > Hi Toni & all WP13 partners > > Would be really sad, if nobody could represent and demo WebTundra at the ECFI. It is an important event for FIWARE (the brand) to kick-off phase 3 of the FI-PPP and I guess many representatives of accelerators will be there too. > This week I canceled and delegated my events on Sept 17/18, to be able to attend ECFI. Worst case I could give the demo, but I really prefer to have somebody there working with it on a day to day basis, who knows the detailed capabilities of Webtundra and also can answer/discuss more complex developer questions. > > Budget-wise I think it could also be booked on FI-Core, because it starts in September and one of the main goals of FI-Core is Demonstration and Developer training/support. I try to clarify this with Telefonica. > > I send this to the whole MIWI list, because I hope somebody can step in. > (Maybe somebody wants to combine it with a private visit of the Oktoberfest, which starts the following weekend 20th September :) ) > > Best regards > Christof > > Am 29.08.2014 um 10:46 schrieb Toni Alatalo : > >> Hi - so far we've found no one that could travel, there's no travel >> budgets in the projects for this (fi-ware had very little, most went >> to the kickoff, and on the fi-core side the kickoff is just before >> this Munich event). And I understood (from you in the weekly) that if >> no one can come we can not demo either :/ >> >> On Fri, Aug 29, 2014 at 11:26 AM, Marti Christof (mach) wrote: >>> Hi Toni >>> >>> Torsten has sent me the following description of the DFKI ECFI demo: https://docs.google.com/document/d/10z4Btr_NAHQ8lKyz9qiDEV6JRB714hhR-ZA5pfw9HC8/edit?usp=sharing >>> >>> Can you please create a similar description for the WebTundra Demo until noon? >>> We also need to specify the target audience ?general public or developers?" >>> In addition I need to know the responsible/presenting person (&partner) and a list of participants from Finnland. >>> >>> Best regards >>> Christof >>> ---- >>> InIT Cloud Computing Lab - ICCLab >>> Institut of Applied Information Technology - InIT >>> Zurich University of Applied Sciences - ZHAW >>> School of Engineering >>> Phone: +41 58 934 70 63 >>> Skype: christof-marti > From miguel.carrillopacheco at telefonica.com Fri Aug 29 16:46:15 2014 From: miguel.carrillopacheco at telefonica.com (MIGUEL CARRILLO PACHECO) Date: Fri, 29 Aug 2014 16:46:15 +0200 Subject: [Fiware-miwi] Catalogue entries and WP13 Message-ID: <54009237.8020309@telefonica.com> Dear all, Before I leave on holidays after a loooong August I wanted to make a point of sending you a message. First I wanted to show my appreciation for your prompt reaction to my request a few days ago, I see many catalogue entries now. I also wanted to apologise but my poor response. I was driven away by higher priorities (for instance, the delivery of 4 deliverables of IoT today is not coincidental) and could not reply properly to a few messages from you that got stuck in my inbox. The way to proceed with the catalogue is not always easy and one of the things that we get from attending the WP10 calls is that we disseminate guidelines for deployment on FI-Lab. Attending these meetings is compulsory for each partner ("WPx sends a representative" is not a reasonable approach) and those who do not attend would not be right in complaining that they do not understand how this goes. Admittedly, we have not met in WP10 for a long time! Anyway, a bit more of info. First, I link to a tutorial that you may or may not be aware of (and yes, it was mentioned in a few WP10 calls): * http://wiki.fi-ware.org/Procedure_to_publish_FI-WARE_software I saw that you have been sharing info and discussing how to do things (for instance, I saw an email from Arto giving tips, which is good!) which is excellent. I think that you have all the contacts but just in case: * Henar (henar.munozfrutos at telefonica.com) - Creation of Recipes, images, blueprints. - Publication on FI-Lab * Stefano - Approvals of access requests to the project "FI-WARE Testbed" on the forge - Approvals of entries on the catalogue * Catalogue support - Pedro Rodriguez (please CC Dalle Carbonare Davide ) - If it is really urgent and Pedro is on holidays, sometimes ?lvaro (aalonsog at dit.upm.es) can help. But please do not CC him by default, this person is always overloaded and very busy. This is theoretically not his work. You also know that Manuel puts together our perception of the progress in FI-Lab. The report he sends from time to time shows where we see a gap and what we see as completed (images, recipes, etc.) I am hopeful that next week we will start to see new GEs in WP13. This will be very good and it will improve our image, your GEs are really have "something". Only a look at the manuals and you realise that they are really, really promising. See you again on the 16th when I'll be back. Regards, Miguel -- Please update your address book with my new e-mail address: miguel.carrillopacheco at telefonica.com ---------------------------------------------------------------------- _/ _/_/ Miguel Carrillo Pacheco _/ _/ _/ _/ Telef?nica Distrito Telef?nica _/ _/_/_/ _/ _/ Investigaci?n y Edifico Oeste 1, Planta 9 _/ _/ _/ _/ Desarrollo Ronda de la Comunicaci?n S/N _/ _/_/ 28050 Madrid (Spain) Tel: (+34) 91 483 26 77 e-mail: miguel.carrillopacheco at telefonica.com Follow FI-WARE on the net Website: http://www.fi-ware.org Facebook: http://www.facebook.com/pages/FI-WARE/251366491587242 Twitter: http://twitter.com/Fiware LinkedIn: http://www.linkedin.com/groups/FIWARE-4239932 ---------------------------------------------------------------------- ________________________________ Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario, puede contener informaci?n privilegiada o confidencial y es para uso exclusivo de la persona o entidad de destino. Si no es usted. el destinatario indicado, queda notificado de que la lectura, utilizaci?n, divulgaci?n y/o copia sin autorizaci?n puede estar prohibida en virtud de la legislaci?n vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma v?a y proceda a su destrucci?n. The information contained in this transmission is privileged and confidential information intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this transmission in error, do not read it. Please immediately reply to the sender that you have received this communication in error and then delete it. Esta mensagem e seus anexos se dirigem exclusivamente ao seu destinat?rio, pode conter informa??o privilegiada ou confidencial e ? para uso exclusivo da pessoa ou entidade de destino. Se n?o ? vossa senhoria o destinat?rio indicado, fica notificado de que a leitura, utiliza??o, divulga??o e/ou c?pia sem autoriza??o pode estar proibida em virtude da legisla??o vigente. Se recebeu esta mensagem por erro, rogamos-lhe que nos o comunique imediatamente por esta mesma via e proceda a sua destrui??o -------------- next part -------------- An HTML attachment was scrubbed... URL: From philipp.slusallek at dfki.de Sun Aug 31 09:44:26 2014 From: philipp.slusallek at dfki.de (Philipp Slusallek) Date: Sun, 31 Aug 2014 09:44:26 +0200 Subject: [Fiware-miwi] Fwd: Catalogue entries and WP13 In-Reply-To: <54009237.8020309@telefonica.com> References: <54009237.8020309@telefonica.com> Message-ID: <5402D25A.9040600@dfki.de> FYI, Philipp -------- Weitergeleitete Nachricht -------- Betreff: Catalogue entries and WP13 Datum: Fri, 29 Aug 2014 16:46:15 +0200 Von: MIGUEL CARRILLO PACHECO An: FI-WARE, MiWi Kopie (CC): christof.marti at zhaw.ch , Stefano De Panfilis , MANUEL ESCRICHE VICENTE , Slusallek Philipp (DFKI) Dear all, Before I leave on holidays after a loooong August I wanted to make a point of sending you a message. First I wanted to show my appreciation for your prompt reaction to my request a few days ago, I see many catalogue entries now. I also wanted to apologise but my poor response. I was driven away by higher priorities (for instance, the delivery of 4 deliverables of IoT today is not coincidental) and could not reply properly to a few messages from you that got stuck in my inbox. The way to proceed with the catalogue is not always easy and one of the things that we get from attending the WP10 calls is that we disseminate guidelines for deployment on FI-Lab. Attending these meetings is compulsory for each partner ("WPx sends a representative" is not a reasonable approach) and those who do not attend would not be right in complaining that they do not understand how this goes. Admittedly, we have not met in WP10 for a long time! Anyway, a bit more of info. First, I link to a tutorial that you may or may not be aware of (and yes, it was mentioned in a few WP10 calls): * http://wiki.fi-ware.org/Procedure_to_publish_FI-WARE_software I saw that you have been sharing info and discussing how to do things (for instance, I saw an email from Arto giving tips, which is good!) which is excellent. I think that you have all the contacts but just in case: * Henar (henar.munozfrutos at telefonica.com) - Creation of Recipes, images, blueprints. - Publication on FI-Lab * Stefano - Approvals of access requests to the project "FI-WARE Testbed" on the forge - Approvals of entries on the catalogue * Catalogue support - Pedro Rodriguez (please CC Dalle Carbonare Davide ) - If it is really urgent and Pedro is on holidays, sometimes ?lvaro (aalonsog at dit.upm.es) can help. But please do not CC him by default, this person is always overloaded and very busy. This is theoretically not his work. You also know that Manuel puts together our perception of the progress in FI-Lab. The report he sends from time to time shows where we see a gap and what we see as completed (images, recipes, etc.) I am hopeful that next week we will start to see new GEs in WP13. This will be very good and it will improve our image, your GEs are really have "something". Only a look at the manuals and you realise that they are really, really promising. See you again on the 16th when I'll be back. Regards, Miguel -- Please update your address book with my new e-mail address: miguel.carrillopacheco at telefonica.com ---------------------------------------------------------------------- _/ _/_/ Miguel Carrillo Pacheco _/ _/ _/ _/ Telef?nica Distrito Telef?nica _/ _/_/_/ _/ _/ Investigaci?n y Edifico Oeste 1, Planta 9 _/ _/ _/ _/ Desarrollo Ronda de la Comunicaci?n S/N _/ _/_/ 28050 Madrid (Spain) Tel: (+34) 91 483 26 77 e-mail: miguel.carrillopacheco at telefonica.com Follow FI-WARE on the net Website: http://www.fi-ware.org Facebook: http://www.facebook.com/pages/FI-WARE/251366491587242 Twitter: http://twitter.com/Fiware LinkedIn: http://www.linkedin.com/groups/FIWARE-4239932 ---------------------------------------------------------------------- ________________________________ Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario, puede contener informaci?n privilegiada o confidencial y es para uso exclusivo de la persona o entidad de destino. Si no es usted. el destinatario indicado, queda notificado de que la lectura, utilizaci?n, divulgaci?n y/o copia sin autorizaci?n puede estar prohibida en virtud de la legislaci?n vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma v?a y proceda a su destrucci?n. The information contained in this transmission is privileged and confidential information intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this transmission in error, do not read it. Please immediately reply to the sender that you have received this communication in error and then delete it. Esta mensagem e seus anexos se dirigem exclusivamente ao seu destinat?rio, pode conter informa??o privilegiada ou confidencial e ? para uso exclusivo da pessoa ou entidade de destino. Se n?o ? vossa senhoria o destinat?rio indicado, fica notificado de que a leitura, utiliza??o, divulga??o e/ou c?pia sem autoriza??o pode estar proibida em virtude da legisla??o vigente. Se recebeu esta mensagem por erro, rogamos-lhe que nos o comunique imediatamente por esta mesma via e proceda a sua destrui??o -- ------------------------------------------------------------------------- Deutsches Forschungszentrum f?r K?nstliche Intelligenz (DFKI) GmbH Trippstadter Strasse 122, D-67663 Kaiserslautern Gesch?ftsf?hrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) Dr. Walter Olthoff Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes Sitz der Gesellschaft: Kaiserslautern (HRB 2313) USt-Id.Nr.: DE 148646973, Steuernummer: 19/673/0060/3 --------------------------------------------------------------------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: philipp_slusallek.vcf Type: text/x-vcard Size: 441 bytes Desc: not available URL: