Hi Markus, When will this testing take place and what will be tested in there? Will the GE be installed according to the installation manual? Will all tests be run on this installed GE or only the last R3 test cases? best regards, Koen On 4/11/2014 3:07 PM, Heller, Markus wrote: > > Hi Koen, > > Yes, you can decide in the first place (is best). If you have no > candidates, I am asked to assign someone according to process (worse > IMHO).... > > So yes, please name a partner -- inside or outside WP3, everyone can > do it basically. Some partners can test more than 1 and some partners > may not test at all (if everything is fine with the balance or so), > but each GE should be tested (or justified why not, see below Stefanos > requirements). > > Best > > Markus > > *From:*fiware-apps-bounces at lists.fi-ware.org > [mailto:fiware-apps-bounces at lists.fi-ware.org] *On Behalf Of *koen casier > *Sent:* Freitag, 11. April 2014 15:03 > *To:* fiware-apps at lists.fi-ware.org > *Subject:* Re: [Fiware-apps] Please act today Friday until 15:00 --> > RE: [Fiware-wpa] URGENT: GEis installation and test > > Dear Markus, > > > > For the business modeler and business calculator, the latest 3.3.3. > version is available for testing, > and all manuals have been updated on the private wiki as well and they > can be found linked under the R3 deliverable listing. > I have named all tests with a number indicating the release they were > available and useable so testers can quickly proceed to the right tests. > > Do I understand correctly that we should ourselves decide who should > test our stuff? > Or should we indicate what we want to have tested and/or what we want > to test? > For this last case, a random assignment of a test will be OK for me. > > > best regards, > Koen > > > On 4/11/2014 11:59 AM, Heller, Markus wrote: > > Hi, > > ...and please fill our your entry row for your GEs, that's why I > have copied the table. > > Do not edit it on Google Docs (I do not know if you have write > access anyway....). I nevertheless cannot edit the google docs > myself since I have no google account, so I will send a compiled > E-Mail later to Stefano. > > Instead, please do me the favor to just write back your table > entries to me in an email until 15:00 today, I put it together. > > How to fill in your table row àI add help how to fill out the > entries, from Stefano: > > - "Release to test:" Example= ?? (a YES/NO, a > date when released so that a tester can start?, ...) > > the exact version number of the gei under test.this should be the > latest completely available at the moment of test, e.g. 3.x.x. > this field should be filled by the tester, but agreed with the wpl > > - "Testing applies?": Example= ?? (no clue... > a Name, a YES/NO, a report of the testing...?) > > "YES" if the gei is oss, so intsllation and deployment test can be > made, otherwise "NO". this field should be filled by the wpl > > - "testing on FI-LAB": Example= ?? (no clue... > a Name, a YES/NO, a report of the testing...?) > > "YES"if the gei, either oss or not, is equipped with recipes for > installation in fi-lab, otherwise "NO". this field should be > filled by the wpl > > - "Assigned tester:" Example= TID, ENG or Markus Heller (SAP) -- > person or company? > > certainly the name of the company. if you also have already the > name of the person responsible for the test, greater! > > *From:*Heller, Markus > *Sent:* Freitag, 11. April 2014 11:53 > *To:* FI-WARE Apps (fiware-apps at lists.fi-ware.org > <mailto:fiware-apps at lists.fi-ware.org>) > *Subject:* Please act today Friday until 15:00 --> RE: > [Fiware-wpa] URGENT: GEis installation and test > > *Chapter* > > > > *GE* > > > > *GEi* > > > > *Release to test* > > > > *Testing applies?* > > > > *Testing on FI-Lab?* > > > > *Assigned tester* > > > > Apps - WP3 > > > > Application Mashup > > > > Wirecloud > > > > > > > > > > Light Semantic Composition Editor > > > > COMPEL > > > > > > > > > > Marketplace > > > > Marketplace - SAP RI > > > > > > > > > > Mediator > > > > Mediator > > > > > > > > > > Mediator > > > > SETHA2 > > > > > > > > > > Registry > > > > Registry - SAP RI > > > > > > > > > > Repository > > > > Repository - SAP RI > > > > > > > > > > Revenue Settlement and Sharing System > > > > Revenue Settlement and Sharing System > > > > > > > > > > Service Composition > > > > Ericsson Composition Engine (ECE) > > > > > > > > > > Service Mashup > > > > Mashup Factory > > > > > > > > > > Store > > > > WStore > > > > > > > > > > Business Calculator > > > > Business Calculator > > > > > > > > > > Business Modeler > > > > Business Modeler > > > > > > > > Hi WP3, > > We have to carry out the installation and usage tests according to > the mail from Stefano below. I as WPL are asked to manage this > process. > > For a first round, please mail me until deadline *Friday today > 15:00 *which 1 (or 2) partners you propose to test your GE (1-2 > tests, minimum 1 test) -- as I have a task until today EOB to send > them to Stefano. > > Regardless of being Open Source or not, you are asked to have your > GE testes as described below, so nomination of test partner is no > problem and we can sort out details later also. > > Fallback: If you cannot mail, I will assign WP3 partners for you > in a fair manner. We can then reassign later next week until > Wednesday where needed. > > If you are in Easter Holidays next week, please act today asap and > mail to me who tests your stuff (approved by him or not) > > Best > > Markus > > --- > > *From:*fiware-wpa-bounces at lists.fi-ware.org > <mailto:fiware-wpa-bounces at lists.fi-ware.org> > [mailto:fiware-wpa-bounces at lists.fi-ware.org] *On Behalf Of > *stefano de panfilis > *Sent:* Dienstag, 8. April 2014 20:32 > > > *To:* fiware-wpl at lists.fi-ware.eu > <mailto:fiware-wpl at lists.fi-ware.eu>; > fiware-wpa at lists.fi-ware.eu <mailto:fiware-wpa at lists.fi-ware.eu> > *Subject:* [Fiware-wpa] URGENT: GEis installation and test > > dear all, > > as discussed yesterday during our call and refined this > morning in the wp10 call, here is the procedure to install and > test the geis as requested in the scope of recommendation 18 > of the review report 6 excerpt of which is "/Obviously, hardly > any of the documentation can claim completeness in the > remaining time, but should at least cover all known grounds. > //To this end, extensive and directed installation and usage > tests should be performed -- not only through the Use Case > projects, but also within the consortium. For example, > partners not involved in the development of a specific Generic > Enabler can verify it through installation and testing. The > according results and findings should be incorporated in the > forthcoming Release 3 and the validation reporting of > deliverable D10.5.3/." > > the wpl migth already have received at this time an invitation > from me to access a googledoc (here again the link for your > convenience: > https://docs.google.com/spreadsheet/ccc?key=0AqLSWp0KXaaDdDBPb2gwYm11aUVQZzBPU3ZZZHowREE&usp=docslist_api#gid=0) > > this doc contains all the geis implemented at the moment or in > the very near future. > > 1. each wpl must, within this friday (11 april 2014), fill, in > agreement with their wp participants, the name of the > organisation responsible for installing a testing a specific > gei. in addition the wpl should declare which geis will be > tested. the overal rules are: > > 1.1 no geis of wp4 for what concerns fi-lab installation and test > > 1.2 only the geis of wp7 which do not require special network > environment > > 1.3 no geis for which do not exist an oss version > > 2. within 25 april 2014 all the installations and tests must > be completed either by the organisations leaving the project > at m36, and by those organisation if a test assigned to them > involve a gei owned by an organisation leaving the project at m36. > > 3. all the remaining installations and tests must be fulfilled > by 30 june 2014. > > the installation and tests must be documented using the form > described in the attached document. > > please note that, as you can easily guess from point 1 above, > there are two different kind of installations to be tested: > > 1. manual deplyoment, which involves all oss released geis > > 2. recipes supported deployment in the fi-ware testbed. this > case the person making the test must create a vm, which should > be removed immediately after the installation and test is > completed (due to the obvious resource cosumption) > > it would be great if the persons who will make the > installation and tests are completely outside the fi-ware > environment. > > this procedure refines and superseeds what sent by thorsten, > thank you for triggering the process, on last wednesday. > > for any clarification you migth need, please do not hesitate > to contact me. > > ciao, > > stefano > > -- > > Stefano De Panfilis > Chief Innovation Officer > Engineering Ingegneria Informatica S.p.A. > via Riccardo Morandi 32 > 00148 Roma > Italy > > tel (direct): +39-068307-4295 <tel:%2B39-068307-4295> > tel (secr.): +39-068307-4513 <tel:%2B39-068307-4513> > fax: +39-068307-4200 <tel:%2B39-068307-4200> > cell: +39-335-7542-567 <tel:%2B39-335-7542-567> > > skype: depa01 > > > > -- > > Stefano De Panfilis > Chief Innovation Officer > Engineering Ingegneria Informatica S.p.A. > via Riccardo Morandi 32 > 00148 Roma > Italy > > tel (direct): +39-068307-4295 > tel (secr.): +39-068307-4513 > fax: +39-068307-4200 > cell: +39-335-7542-567 > > skype: depa01 > > > > > _______________________________________________ > > Fiware-apps mailing list > > Fiware-apps at lists.fi-ware.org <mailto:Fiware-apps at lists.fi-ware.org> > > https://lists.fi-ware.org/listinfo/fiware-apps > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://lists.fiware.org/private/old-fiware-apps/attachments/20140411/f827cb1f/attachment.html>
You can get more information about our cookies and privacy policies clicking on the following links: Privacy policy Cookies policy