From randradas at libresoft.es Mon May 9 15:41:39 2011 From: randradas at libresoft.es (Roberto Andradas Izquierdo) Date: Mon, 9 May 2011 15:41:39 +0200 Subject: [Fiware-tools] test2 Message-ID: test2 From randradas at libresoft.es Mon May 9 15:44:36 2011 From: randradas at libresoft.es (Roberto Andradas Izquierdo) Date: Mon, 9 May 2011 15:44:36 +0200 Subject: [Fiware-tools] test3 Message-ID: test3 From randradas at libresoft.es Mon May 9 15:49:49 2011 From: randradas at libresoft.es (Roberto Andradas Izquierdo) Date: Mon, 9 May 2011 15:49:49 +0200 Subject: [Fiware-tools] test4 Message-ID: test4 From 100029794 at alumnos.uc3m.es Mon May 9 16:22:21 2011 From: 100029794 at alumnos.uc3m.es (Roberto Andradas Izquierdo) Date: Mon, 9 May 2011 16:22:21 +0200 Subject: [Fiware-tools] test6 Message-ID: test6 From jhierro at tid.es Tue May 17 16:52:55 2011 From: jhierro at tid.es (Juanjo Hierro) Date: Tue, 17 May 2011 16:52:55 +0200 Subject: [Fiware-tools] Template for FI-WARE documents (including template for deliverables) available in documentation management tool Message-ID: <4DD28BC7.9020607@tid.es> Dear colleagues, The document management tool is now finally configured so that we are now able to use it for sharing documents. I'll send you a brief document describing how it works in order to upload/publish documents later this evening. In the meantime, let me share with you the template we would like you to follow for creating FI-WARE documents. You can download it from: http://forge.fi-ware.eu/docman/view.php/7/42/FI-WARE+Public+Document+template+11-05-17.doc You may also find a template for meeting minutes useful. You can download it from: http://forge.fi-ware.eu/docman/view.php/7/41/FI-WARE+Minutes+template+11-05-17.doc Both documents are private, so that only users properly registered in the FI-WARE project in the FI-WARE FusionForge will be able to download them :-) I hope this will persuade most of you to register in the FI-WARE project @ FusionForge if you haven't still done so :-) A mail reminding to register with a detailed (updated) description of steps to be followed will arrive to you in the next message. Best regards, -- Juanjo ________________________________ Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra pol?tica de env?o y recepci?n de correo electr?nico en el enlace situado m?s abajo. This message is intended exclusively for its addressee. We only send and receive email on the basis of the terms set out at. http://www.tid.es/ES/PAGINAS/disclaimer.aspx -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: jhierro.vcf Type: text/x-vcard Size: 429 bytes Desc: not available URL: From jhierro at tid.es Tue May 17 16:55:12 2011 From: jhierro at tid.es (Juanjo Hierro) Date: Tue, 17 May 2011 16:55:12 +0200 Subject: [Fiware-tools] Reminder and updated instructions for registering at FusionForge and be able to access to shared documentation Message-ID: <4DD28C50.20104@tid.es> Dear all, Following is a list of instructions you should follow to register in FusionForge and be able to upload as well as to share documents. Registering in the FI-WARE project is quite easy. We will ask you to perform the following steps (*important note*: this is an update of the instructions I sent a couple of days ago): 1. Registration as users of FusionForge This is pretty simple. You just have to go to: http://forge.fi-ware.eu/ then click on "New Account" in the upper right corner It should drive you to a screen where you will assign yourself a nickname. It should be valid UNIX login name, so that "." are not allowed. I would suggest using "_" instead. You have to fill a registration form and after doing so, click "Register". Once we do this, you have to check your email (you should provide your email address in the registration form) and then complete registration. WPLs are entitled to ask people working in their WPs to perform this step as soon as possible. Please note that maybe not all people are registered in fiware at lists.fi-ware.eu so you should forward this message also to your lists with any other specific instruction you may want to add. Note that registering in FusionForge is a step necessary to perform the following steps and finally be able to get access to private documents uploaded in FusionForge. 2. Give Admin privileges to WPLs All WPs have a "project" in Fussion Forge. You can already see them listed at: http://forge.fi-ware.eu/ on the right bottom corner under section "Recently Registered Projects" Once WPLs have registered them as users in the Forge, they should send me an email informing about this. Then I will register them as Admin users in the project corresponding to the WP they lead as well as in FI-WARE. Pascal Bisson (Security WP), Torsten Leidig (Apps/Services Ecosystem WP), Alex Glikson (Cloud Hosting WP), myself (Data/Context Management WP), Hans Joachim Einsiedler and Pierangelo Garino (I2ND WP) have already registered and have been assigned Admin privileges both in FI-WARE and their WP. Still missing: IoT Services Enablement WP, Exploitation WP and the Developers Community Tools WP. 3. Give access to partners in each of the WPLs Once WPLs get admin privileges, they should take care of registering members of their WP team in their projects as well as the FI-WARE project @ FusionForge. Admins at TID will also help to add them to FI-WARE. There are two ways a given person already registered in FusionForge can join a project as member: * Option 1: * Tell this to your WPL and me by email. Your WPL (or someone from TID for the FI-WARE project) has to go to the space assigned to the project. You can see all available projects at: * http://forge.fi-ware.eu/softwaremap/full_list.php * After navigating to the project he/she manages, the WPL should click on the Admin Tab and then click on the "Users" menu option (right below the Admin Tab) and finally select "Add Users from List". Then he/she just needs to look for the user he wants to register in the project and mark the "Add User" option (you'll see it on the right side). Once he has marked all users he/she wants to add, just needs to click on the "Finish" button * This bring him/her to a screen where he can decide on the role assigned to each selected user (we recommend you to assign a "Senior Developer" rol) and finally click on "Add all" * Option 2: * The partner who wants to join a given project goes to the space linked to that project by clicking on the corresponding URL at: * http://forge.fi-ware.eu/softwaremap/full_list.php * Then the partner goes to the box at the right hand of the screen where the names of Admins and developers of the project are listed and clicks on the "Request to join" link there * The WPL and TID will check requests to join and will approve them when appropriate. Note that WPLs have to decide what privileges you assign users in their corresponding projects. They may add more Admins or assign it that of a Senior Developer or Doc Writer, I would suggest Senior Developer. 4. Sharing documents Once you perform the steps above, it should be quite easy to share documents. I will send an email giving a brief tutorial on this later this evening. ________________________________ Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra pol?tica de env?o y recepci?n de correo electr?nico en el enlace situado m?s abajo. This message is intended exclusively for its addressee. We only send and receive email on the basis of the terms set out at. http://www.tid.es/ES/PAGINAS/disclaimer.aspx -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: jhierro.vcf Type: text/x-vcard Size: 429 bytes Desc: not available URL: From jhierro at tid.es Tue May 17 18:40:18 2011 From: jhierro at tid.es (Juanjo Hierro) Date: Tue, 17 May 2011 18:40:18 +0200 Subject: [Fiware-tools] Problems accessing FI-WARE documents (including template for deliverables) available in documentation management tool In-Reply-To: References: <4DD28BC7.9020607@tid.es> Message-ID: <4DD2A4F2.1050304@tid.es> Dear Wolfgang, I copy all the project because my response to your question might be useful for all. What happens to you is because: * you have not requested to join the FI-WARE project (you should request joining FI-WARE and the project linked to WPs you are involved in) OR * you have not send an email to your WPL asking him/her to register you in the FI-WARE project (and the project linked to the WP he/she leads) This was explained in my previous message. Probably the easiest method would be the first one. You just need to get access to the project page (through http://forge.fi-ware.eu/softwaremap/full_list.php) and then click on the "Request to join" link you will find on the right side of your screen: [cid:part1.00070202.05070106 at tid.es] Once you request to join, either one of the WPLs or some Admin from TID will grant you access (also explained in my previous mail). Note for the Admins: you should grant access but assigning a "Senior Developer" role. Note that EVERYONE in the world might register in our FusionForge instance (that's the way it works). This ease administration and also enables third parties to approach us. However, only FusionForge users that are registered in a project can access documents labeled as "private" to that project. In the case of the referred documents, we decided to label them as private to the project. Hope this helps, -- Juanjo On 17/05/11 17:48, Wolfgang.Steigerwald at telekom.de wrote: Hello Juanjo, even so I'm registered on FusionForge I receive "Permission denied" Best regards Wolfgang Deutsche Telekom AG T-Labs (Research & Development) Wolfgang Steigerwald Goslarer Ufer 35, 10589 Berlin +49 30 3497-2058 (Tel.) +49 391 53475396 (Fax) +49 171 5664350 (Mobil) E-Mail: wolfgang.steigerwald at telekom.de www.telekom.com Erleben, was verbindet. Deutsche Telekom AG Aufsichtsrat: Prof. Dr. Ulrich Lehner (Vorsitzender) Vorstand: Ren? Obermann (Vorsitzender), Dr. Manfred Balz, Reinhard Clemens, Niek Jan van Damme, Timotheus H?ttges, Edward R. Kozel, Thomas Sattelberger Handelsregister: Amtsgericht Bonn HRB 6794 Sitz der Gesellschaft Bonn WEEE-Reg.-Nr. DE50478376 Gro?e Ver?nderungen fangen klein an ? Ressourcen schonen und nicht jede E-Mail drucken. ________________________________ Von: fiware-i2nd-bounces at lists.fi-ware.eu [mailto:fiware-i2nd-bounces at lists.fi-ware.eu] Im Auftrag von Juanjo Hierro Gesendet: Dienstag, 17. Mai 2011 16:53 An: fiware at lists.fi-ware.eu; fiware-apps at lists.fi-ware.eu; fiware-cloud at lists.fi-ware.eu; fiware-data at lists.fi-ware.eu; fiware-iot at lists.fi-ware.eu; fiware-i2nd at lists.fi-ware.eu; fiware-security at lists.fi-ware.eu; fiware-tools at lists.fi-ware.eu Betreff: [Fiware-i2nd] Template for FI-WARE documents (including template for deliverables) available in documentation management tool Dear colleagues, The document management tool is now finally configured so that we are now able to use it for sharing documents. I'll send you a brief document describing how it works in order to upload/publish documents later this evening. In the meantime, let me share with you the template we would like you to follow for creating FI-WARE documents. You can download it from: http://forge.fi-ware.eu/docman/view.php/7/42/FI-WARE+Public+Document+template+11-05-17.doc You may also find a template for meeting minutes useful. You can download it from: http://forge.fi-ware.eu/docman/view.php/7/41/FI-WARE+Minutes+template+11-05-17.doc Both documents are private, so that only users properly registered in the FI-WARE project in the FI-WARE FusionForge will be able to download them :-) I hope this will persuade most of you to register in the FI-WARE project @ FusionForge if you haven't still done so :-) A mail reminding to register with a detailed (updated) description of steps to be followed will arrive to you in the next message. Best regards, -- Juanjo ________________________________ Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra pol?tica de env?o y recepci?n de correo electr?nico en el enlace situado m?s abajo. This message is intended exclusively for its addressee. We only send and receive email on the basis of the terms set out at. http://www.tid.es/ES/PAGINAS/disclaimer.aspx ________________________________ Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra pol?tica de env?o y recepci?n de correo electr?nico en el enlace situado m?s abajo. This message is intended exclusively for its addressee. We only send and receive email on the basis of the terms set out at. http://www.tid.es/ES/PAGINAS/disclaimer.aspx -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: moz-screenshot-14.png Type: image/png Size: 94944 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: jhierro.vcf Type: text/x-vcard Size: 429 bytes Desc: not available URL: From stefano.depanfilis at eng.it Wed May 18 23:39:51 2011 From: stefano.depanfilis at eng.it (stefano de panfilis) Date: Wed, 18 May 2011 23:39:51 +0200 Subject: [Fiware-tools] WP9 official mail list Message-ID: dear all, from now on fiware-tools at lists.fi-ware.eu is the official mail list for wp9 and this is the only one to be used to communicate between all of us. please answer to this email to check if you correctly receive this email and... by difference who is not yet in the mail list ;-) ciao, stefano -- Stefano De Panfilis Research and Development Laboratories Department Director Engineering Ingegneria Informatica S.p.A. via Riccardo Morandi 32 00148 Roma Italy tel (direct): +39-068307-4295 tel (secr.): +39-068307-4513 fax: +39-068307-4200 cell: +39-335-7542-567 From davide.dallecarbonare at eng.it Thu May 19 09:45:51 2011 From: davide.dallecarbonare at eng.it (Davide Dalle Carbonare) Date: Thu, 19 May 2011 09:45:51 +0200 Subject: [Fiware-tools] WP9 official mail list In-Reply-To: References: Message-ID: <4DD4CAAF.4020802@eng.it> Here I am! cheers, Davide On 18/05/2011 23.39, stefano de panfilis wrote: > dear all, > > from now on fiware-tools at lists.fi-ware.eu is the official mail list > for wp9 and this is the only one to be used to communicate between all > of us. > please answer to this email to check if you correctly receive this > email and... by difference who is not yet in the mail list ;-) > > ciao, > stefano > -------------- next part -------------- An HTML attachment was scrubbed... URL: From gabriele.giammatteo at eng.it Thu May 19 10:00:33 2011 From: gabriele.giammatteo at eng.it (Gabriele Giammatteo) Date: Thu, 19 May 2011 10:00:33 +0200 Subject: [Fiware-tools] WP9 official mail list In-Reply-To: References: Message-ID: <4DD4CE21.4030609@eng.it> ack! ----------------------------------------------------------- Gabriele Giammatteo Research and Development Laboratory Engineering Ingegneria Informatica S.p.A. Via Riccardo Morandi, 32 00148 Roma - Italy www.eng.it email: gabriele.giammatteo at eng.it mob: +39 338 8506 202 tel: +39 06 8307 4031 skype: gabriele.giammatteo Respect the environment. Please don't print this e-mail unless you really need to. ----------------------------------------------------------- On 05/18/2011 11:39 PM, stefano de panfilis wrote: > dear all, > > from now on fiware-tools at lists.fi-ware.eu is the official mail list > for wp9 and this is the only one to be used to communicate between all > of us. > please answer to this email to check if you correctly receive this > email and... by difference who is not yet in the mail list ;-) > > ciao, > stefano > From jesus.gorronogoitia at atosresearch.eu Thu May 19 10:05:07 2011 From: jesus.gorronogoitia at atosresearch.eu (Yosu =?ISO-8859-1?Q?Gorro=F1ogoitia?=) Date: Thu, 19 May 2011 10:05:07 +0200 Subject: [Fiware-tools] WP9 official mail list In-Reply-To: References: Message-ID: <1305792307.15579.3.camel@linux-gzvm.site> Message received. Regards Yosu On Wed, 2011-05-18 at 23:39 +0200, stefano de panfilis wrote: > dear all, > > from now on fiware-tools at lists.fi-ware.eu is the official mail list > for wp9 and this is the only one to be used to communicate between all > of us. > please answer to this email to check if you correctly receive this > email and... by difference who is not yet in the mail list ;-) > > ciao, > stefano > ------------------------------------------------------------------ This e-mail and the documents attached are confidential and intended solely for the addressee; it may also be privileged. If you receive this e-mail in error, please notify the sender immediately and destroy it. As its integrity cannot be secured on the Internet, the Atos Origin group liability cannot be triggered for the message content. Although the sender endeavours to maintain a computer virus-free network, the sender does not warrant that this transmission is virus-free and will not be liable for any damages resulting from any virus transmitted. Este mensaje y los ficheros adjuntos pueden contener informacion confidencial destinada solamente a la(s) persona(s) mencionadas anteriormente pueden estar protegidos por secreto profesional. Si usted recibe este correo electronico por error, gracias por informar inmediatamente al remitente y destruir el mensaje. Al no estar asegurada la integridad de este mensaje sobre la red, Atos Origin no se hace responsable por su contenido. Su contenido no constituye ningun compromiso para el grupo Atos Origin, salvo ratificacion escrita por ambas partes. Aunque se esfuerza al maximo por mantener su red libre de virus, el emisor no puede garantizar nada al respecto y no sera responsable de cualesquiera danos que puedan resultar de una transmision de virus. ------------------------------------------------------------------ From biberstein at il.ibm.com Thu May 19 10:04:47 2011 From: biberstein at il.ibm.com (Marina Biberstein) Date: Thu, 19 May 2011 11:04:47 +0300 Subject: [Fiware-tools] WP9 official mail list In-Reply-To: <4DD4CAAF.4020802@eng.it> References: <4DD4CAAF.4020802@eng.it> Message-ID: Hello! Cheers, -- Marina ---------------------------------------------------------------------------- Tel. +972-4-829-6133 E-mail biberstein at il.ibm.com From: Davide Dalle Carbonare To: fiware-tools at lists.fi-ware.eu Date: 19/05/2011 10:48 AM Subject: Re: [Fiware-tools] WP9 official mail list Sent by: fiware-tools-bounces at lists.fi-ware.eu Here I am! cheers, Davide On 18/05/2011 23.39, stefano de panfilis wrote: dear all, from now on fiware-tools at lists.fi-ware.eu is the official mail list for wp9 and this is the only one to be used to communicate between all of us. please answer to this email to check if you correctly receive this email and... by difference who is not yet in the mail list ;-) ciao, stefano _______________________________________________ Fiware-tools mailing list Fiware-tools at lists.fi-ware.eu http://lists.fi-ware.eu/listinfo/fiware-tools From Andreas.Froese at sse.uni-due.de Thu May 19 10:11:04 2011 From: Andreas.Froese at sse.uni-due.de (Froese, Andreas) Date: Thu, 19 May 2011 10:11:04 +0200 Subject: [Fiware-tools] WP9 official mail list In-Reply-To: <4DD4CAAF.4020802@eng.it> References: <4DD4CAAF.4020802@eng.it> Message-ID: <1C82271C464FD44D876227B6AFA47E0B03971C9B@GENESIS.se.local> Here I am. Cheers, Andreas Von: fiware-tools-bounces at lists.fi-ware.eu [mailto:fiware-tools-bounces at lists.fi-ware.eu] Im Auftrag von Davide Dalle Carbonare Gesendet: Donnerstag, 19. Mai 2011 09:46 An: fiware-tools at lists.fi-ware.eu Betreff: Re: [Fiware-tools] WP9 official mail list Here I am! cheers, Davide On 18/05/2011 23.39, stefano de panfilis wrote: dear all, from now on fiware-tools at lists.fi-ware.eu is the official mail list for wp9 and this is the only one to be used to communicate between all of us. please answer to this email to check if you correctly receive this email and... by difference who is not yet in the mail list ;-) ciao, stefano -------------- next part -------------- An HTML attachment was scrubbed... URL: From alejandra.trujillo at atosresearch.eu Thu May 19 10:38:13 2011 From: alejandra.trujillo at atosresearch.eu (Maria Alejandra Trujillo Valencia) Date: Thu, 19 May 2011 10:38:13 +0200 Subject: [Fiware-tools] WP9 official mail list In-Reply-To: References: Message-ID: <0873BB104CB1B24B870DF370AA41587F0276BC40@INTMAIL02.es.int.atosorigin.com> Hello Regards. Alejandra -----Original Message----- From: fiware-tools-bounces at lists.fi-ware.eu [mailto:fiware-tools-bounces at lists.fi-ware.eu] On Behalf Of stefano de panfilis Sent: mi?rcoles, 18 de mayo de 2011 23:40 To: fiware-tools at lists.fi-ware.eu Subject: [Fiware-tools] WP9 official mail list dear all, from now on fiware-tools at lists.fi-ware.eu is the official mail list for wp9 and this is the only one to be used to communicate between all of us. please answer to this email to check if you correctly receive this email and... by difference who is not yet in the mail list ;-) ciao, stefano -- Stefano De Panfilis Research and Development Laboratories Department Director Engineering Ingegneria Informatica S.p.A. via Riccardo Morandi 32 00148 Roma Italy tel (direct): +39-068307-4295 tel (secr.): +39-068307-4513 fax: +39-068307-4200 cell: +39-335-7542-567 _______________________________________________ Fiware-tools mailing list Fiware-tools at lists.fi-ware.eu http://lists.fi-ware.eu/listinfo/fiware-tools ------------------------------------------------------------------ This e-mail and the documents attached are confidential and intended solely for the addressee; it may also be privileged. If you receive this e-mail in error, please notify the sender immediately and destroy it. As its integrity cannot be secured on the Internet, the Atos Origin group liability cannot be triggered for the message content. Although the sender endeavours to maintain a computer virus-free network, the sender does not warrant that this transmission is virus-free and will not be liable for any damages resulting from any virus transmitted. Este mensaje y los ficheros adjuntos pueden contener informacion confidencial destinada solamente a la(s) persona(s) mencionadas anteriormente pueden estar protegidos por secreto profesional. Si usted recibe este correo electronico por error, gracias por informar inmediatamente al remitente y destruir el mensaje. Al no estar asegurada la integridad de este mensaje sobre la red, Atos Origin no se hace responsable por su contenido. Su contenido no constituye ningun compromiso para el grupo Atos Origin, salvo ratificacion escrita por ambas partes. Aunque se esfuerza al maximo por mantener su red libre de virus, el emisor no puede garantizar nada al respecto y no sera responsable de cualesquiera danos que puedan resultar de una transmision de virus. ------------------------------------------------------------------ From BILHA at il.ibm.com Thu May 19 11:01:46 2011 From: BILHA at il.ibm.com (Bilha Mendelson) Date: Thu, 19 May 2011 12:01:46 +0300 Subject: [Fiware-tools] WP9 official mail list In-Reply-To: References: Message-ID: Got it. Bilha Bilha Mendelson Senior Manager, Code Optimization and Quality Technologies IBM Research Lab in Haifa, Israel Phone: (972) 4 829-6306 Fax: (972) 4 829-6116 From: stefano de panfilis To: fiware-tools at lists.fi-ware.eu Date: 19/05/2011 12:39 AM Subject: [Fiware-tools] WP9 official mail list Sent by: fiware-tools-bounces at lists.fi-ware.eu dear all, from now on fiware-tools at lists.fi-ware.eu is the official mail list for wp9 and this is the only one to be used to communicate between all of us. please answer to this email to check if you correctly receive this email and... by difference who is not yet in the mail list ;-) ciao, stefano -- Stefano De Panfilis Research and Development Laboratories Department Director Engineering Ingegneria Informatica S.p.A. via Riccardo Morandi 32 00148 Roma Italy tel (direct): +39-068307-4295 tel (secr.): +39-068307-4513 fax: +39-068307-4200 cell: +39-335-7542-567 _______________________________________________ Fiware-tools mailing list Fiware-tools at lists.fi-ware.eu http://lists.fi-ware.eu/listinfo/fiware-tools From pasquale.vitale at eng.it Thu May 19 11:26:44 2011 From: pasquale.vitale at eng.it (Pasquale Vitale) Date: Thu, 19 May 2011 11:26:44 +0200 Subject: [Fiware-tools] WP9 official mail list In-Reply-To: References: Message-ID: <4DD4E254.8040308@eng.it> Here I am! Pasquale On 19/05/2011 11:01, Bilha Mendelson wrote: > Got it. > > Bilha > > Bilha Mendelson > Senior Manager, Code Optimization and Quality Technologies > IBM Research Lab in Haifa, Israel > Phone: (972) 4 829-6306 Fax: (972) 4 829-6116 > > > > From: stefano de panfilis > > To: fiware-tools at lists.fi-ware.eu > > Date: 19/05/2011 12:39 AM > > Subject: [Fiware-tools] WP9 official mail list > > Sent by: fiware-tools-bounces at lists.fi-ware.eu > > > > > > > dear all, > > from now on fiware-tools at lists.fi-ware.eu is the official mail list > for wp9 and this is the only one to be used to communicate between all > of us. > please answer to this email to check if you correctly receive this > email and... by difference who is not yet in the mail list ;-) > > ciao, > stefano > > -- > Stefano De Panfilis > Research and Development Laboratories Department Director > Engineering Ingegneria Informatica S.p.A. > via Riccardo Morandi 32 > 00148 Roma > Italy > > tel (direct): +39-068307-4295 > tel (secr.): +39-068307-4513 > fax: +39-068307-4200 > cell: +39-335-7542-567 > _______________________________________________ > Fiware-tools mailing list > Fiware-tools at lists.fi-ware.eu > http://lists.fi-ware.eu/listinfo/fiware-tools > > > > _______________________________________________ > Fiware-tools mailing list > Fiware-tools at lists.fi-ware.eu > http://lists.fi-ware.eu/listinfo/fiware-tools > -------------- next part -------------- An HTML attachment was scrubbed... URL: From davide.dallecarbonare at eng.it Fri May 20 15:12:27 2011 From: davide.dallecarbonare at eng.it (Davide Dalle Carbonare) Date: Fri, 20 May 2011 15:12:27 +0200 Subject: [Fiware-tools] WP9 project subscription on the forge Message-ID: <4DD668BB.90701@eng.it> Dear all, as for the mailing list I ask you to join the WP9 project on the forge: FI-WARE Tools, that's directly accessible from this link: http://forge.fi-ware.eu/projects/tools/ we're going to use this project for our collaborative activities. register first, if don't have an account, login and click on "Request to join", see you there. have a nice week end cheers Davide -------------- next part -------------- An HTML attachment was scrubbed... URL: From davide.dallecarbonare at eng.it Mon May 23 10:56:14 2011 From: davide.dallecarbonare at eng.it (Davide Dalle Carbonare) Date: Mon, 23 May 2011 10:56:14 +0200 Subject: [Fiware-tools] Template for FI-WARE documents (including template for deliverables) available in documentation management tool In-Reply-To: <4DD28BC7.9020607@tid.es> References: <4DD28BC7.9020607@tid.es> Message-ID: <4DDA212E.1090208@eng.it> Dear Juanjo, is there an already selected license to apply to the public documents? I think it would be useful for everyone to have it in the next template version. thank you and Best Regards, Davide On 17/05/2011 16.52, Juanjo Hierro wrote: > Dear colleagues, > > The document management tool is now finally configured so that we > are now able to use it for sharing documents. > > I'll send you a brief document describing how it works in order to > upload/publish documents later this evening. > > In the meantime, let me share with you the template we would like > you to follow for creating FI-WARE documents. You can download it from: > > http://forge.fi-ware.eu/docman/view.php/7/42/FI-WARE+Public+Document+template+11-05-17.doc > > > You may also find a template for meeting minutes useful. You can > download it from: > > http://forge.fi-ware.eu/docman/view.php/7/41/FI-WARE+Minutes+template+11-05-17.doc > > Both documents are private, so that only users properly registered > in the FI-WARE project in the FI-WARE FusionForge will be able to > download them :-) I hope this will persuade most of you to register > in the FI-WARE project @ FusionForge if you haven't still done so :-) > > A mail reminding to register with a detailed (updated) description > of steps to be followed will arrive to you in the next message. > > Best regards, > > -- Juanjo > > > > ------------------------------------------------------------------------ > Este mensaje se dirige exclusivamente a su destinatario. Puede > consultar nuestra pol?tica de env?o y recepci?n de correo electr?nico > en el enlace situado m?s abajo. > This message is intended exclusively for its addressee. We only send > and receive email on the basis of the terms set out at. > http://www.tid.es/ES/PAGINAS/disclaimer.aspx > > > _______________________________________________ > Fiware-tools mailing list > Fiware-tools at lists.fi-ware.eu > http://lists.fi-ware.eu/listinfo/fiware-tools -------------- next part -------------- An HTML attachment was scrubbed... URL: From jhierro at tid.es Mon May 23 10:59:33 2011 From: jhierro at tid.es (Juanjo Hierro) Date: Mon, 23 May 2011 10:59:33 +0200 Subject: [Fiware-tools] Template for FI-WARE documents (including template for deliverables) available in documentation management tool In-Reply-To: <4DDA212E.1090208@eng.it> References: <4DD28BC7.9020607@tid.es> <4DDA212E.1090208@eng.it> Message-ID: <4DDA21F5.6020709@tid.es> Point taken. We'll prepare something. On 23/05/11 10:56, Davide Dalle Carbonare wrote: Dear Juanjo, is there an already selected license to apply to the public documents? I think it would be useful for everyone to have it in the next template version. thank you and Best Regards, Davide On 17/05/2011 16.52, Juanjo Hierro wrote: Dear colleagues, The document management tool is now finally configured so that we are now able to use it for sharing documents. I'll send you a brief document describing how it works in order to upload/publish documents later this evening. In the meantime, let me share with you the template we would like you to follow for creating FI-WARE documents. You can download it from: http://forge.fi-ware.eu/docman/view.php/7/42/FI-WARE+Public+Document+template+11-05-17.doc You may also find a template for meeting minutes useful. You can download it from: http://forge.fi-ware.eu/docman/view.php/7/41/FI-WARE+Minutes+template+11-05-17.doc Both documents are private, so that only users properly registered in the FI-WARE project in the FI-WARE FusionForge will be able to download them :-) I hope this will persuade most of you to register in the FI-WARE project @ FusionForge if you haven't still done so :-) A mail reminding to register with a detailed (updated) description of steps to be followed will arrive to you in the next message. Best regards, -- Juanjo ________________________________ Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra pol?tica de env?o y recepci?n de correo electr?nico en el enlace situado m?s abajo. This message is intended exclusively for its addressee. We only send and receive email on the basis of the terms set out at. http://www.tid.es/ES/PAGINAS/disclaimer.aspx _______________________________________________ Fiware-tools mailing list Fiware-tools at lists.fi-ware.eu http://lists.fi-ware.eu/listinfo/fiware-tools ________________________________ Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra pol?tica de env?o y recepci?n de correo electr?nico en el enlace situado m?s abajo. This message is intended exclusively for its addressee. We only send and receive email on the basis of the terms set out at. http://www.tid.es/ES/PAGINAS/disclaimer.aspx -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: jhierro.vcf Type: text/x-vcard Size: 429 bytes Desc: not available URL: From stefano.depanfilis at eng.it Mon May 23 11:29:13 2011 From: stefano.depanfilis at eng.it (stefano de panfilis) Date: Mon, 23 May 2011 11:29:13 +0200 Subject: [Fiware-tools] Template for FI-WARE documents (including template for deliverables) available in documentation management tool In-Reply-To: <4DDA21F5.6020709@tid.es> References: <4DD28BC7.9020607@tid.es> <4DDA212E.1090208@eng.it> <4DDA21F5.6020709@tid.es> Message-ID: dear juanjo, my suggestion is Creative Commons Attribution-Share Alike 3.0 License (we used this in nexof-ra). ciao, stefano 2011/5/23 Juanjo Hierro : > > ? Point taken.?? We'll prepare something. > > On 23/05/11 10:56, Davide Dalle Carbonare wrote: > > Dear Juanjo, > ??? is there an already selected license to apply to the public documents? > I think it would be useful for everyone to have it in the next template > version. > > thank you and > Best Regards, > Davide > > > On 17/05/2011 16.52, Juanjo Hierro wrote: > > Dear colleagues, > > ? The document management tool is now finally configured so that we are now > able to use it for sharing documents. > > ? I'll send you a brief document describing how it works in order to > upload/publish documents later this evening. > > ? In the meantime, let me share with you the template we would like you to > follow for creating FI-WARE documents.?? You can download it from: > > http://forge.fi-ware.eu/docman/view.php/7/42/FI-WARE+Public+Document+template+11-05-17.doc > > ? You may also find a template for meeting minutes useful.?? You can > download it from: > > http://forge.fi-ware.eu/docman/view.php/7/41/FI-WARE+Minutes+template+11-05-17.doc > > ? Both documents are private, so that only users properly registered in the > FI-WARE project in the FI-WARE FusionForge will be able to download them > :-)?? I hope this will persuade most of you to register in the FI-WARE > project @ FusionForge if you haven't still done so :-) > > ? A mail reminding to register with a detailed (updated) description of > steps to be followed will arrive to you in the next message. > > ? Best regards, > > -- Juanjo > > > > ________________________________ > Este mensaje se dirige exclusivamente a su destinatario. Puede consultar > nuestra pol?tica de env?o y recepci?n de correo electr?nico en el enlace > situado m?s abajo. > This message is intended exclusively for its addressee. We only send and > receive email on the basis of the terms set out at. > http://www.tid.es/ES/PAGINAS/disclaimer.aspx > > _______________________________________________ > Fiware-tools mailing list > Fiware-tools at lists.fi-ware.eu > http://lists.fi-ware.eu/listinfo/fiware-tools > > ________________________________ > Este mensaje se dirige exclusivamente a su destinatario. Puede consultar > nuestra pol?tica de env?o y recepci?n de correo electr?nico en el enlace > situado m?s abajo. > This message is intended exclusively for its addressee. We only send and > receive email on the basis of the terms set out at. > http://www.tid.es/ES/PAGINAS/disclaimer.aspx > > _______________________________________________ > Fiware-tools mailing list > Fiware-tools at lists.fi-ware.eu > http://lists.fi-ware.eu/listinfo/fiware-tools > > -- Stefano De Panfilis Research and Development Laboratories Department Director Engineering Ingegneria Informatica S.p.A. via Riccardo Morandi 32 00148 Roma Italy tel (direct): +39-068307-4295 tel (secr.): +39-068307-4513 fax: +39-068307-4200 cell: +39-335-7542-567 From matteo.melideo at eng.it Tue May 24 11:34:04 2011 From: matteo.melideo at eng.it (Matteo Melideo) Date: Tue, 24 May 2011 11:34:04 +0200 Subject: [Fiware-tools] Remind the PhC is starting now ... Message-ID: <4DDB7B8C.5030304@eng.it> Regards, M. -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: matteo_melideo.vcf Type: text/x-vcard Size: 354 bytes Desc: not available URL: From davide.dallecarbonare at eng.it Tue May 24 18:04:47 2011 From: davide.dallecarbonare at eng.it (Davide Dalle Carbonare) Date: Tue, 24 May 2011 18:04:47 +0200 Subject: [Fiware-tools] new documents published Message-ID: <4DDBD71F.9030900@eng.it> Dear partners, I've uploaded in the forge the today PhC minutes http://forge.fi-ware.eu/docman/view.php/15/58/wp9-2011.05.24-minutes.doc and an updated version of the WP9 Wrap Up of the Madrid Kick Off meeting http://forge.fi-ware.eu/docman/view.php/15/56/Wp9+-+Wrap+up+%28updated%29.odp All the documents are private (you have to login to see them). Comments are welcome. cheers, Davide. -------------- next part -------------- An HTML attachment was scrubbed... URL: From matteo.melideo at eng.it Wed May 25 15:46:42 2011 From: matteo.melideo at eng.it (Matteo Melideo) Date: Wed, 25 May 2011 15:46:42 +0200 Subject: [Fiware-tools] Kick-off presentations uploaded... Message-ID: <4DDD0842.1020509@eng.it> Dear All, all the presentations of the Wp9 kick-off have been now uploaded into the project forge in our specific session. Regards, Matteo -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: matteo_melideo.vcf Type: text/x-vcard Size: 354 bytes Desc: not available URL: From matteo.melideo at eng.it Mon May 30 19:56:40 2011 From: matteo.melideo at eng.it (Matteo Melideo) Date: Mon, 30 May 2011 19:56:40 +0200 Subject: [Fiware-tools] PhC tomorrow Message-ID: <4DE3DA58.6020405@eng.it> Dear All, this is to remind you that tomorrow there will be the usual Wp9 PhC. The topic will be the discussion on the UML tool chosen and the first draft of the documents that we will present you to start receive inputs. Regards, Matteo -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: matteo_melideo.vcf Type: text/x-vcard Size: 354 bytes Desc: not available URL: From matteo.melideo at eng.it Tue May 31 11:31:51 2011 From: matteo.melideo at eng.it (Matteo Melideo) Date: Tue, 31 May 2011 11:31:51 +0200 Subject: [Fiware-tools] Doc... Message-ID: <4DE4B587.4040203@eng.it> -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: WP9.1IDEForgeIntegration.odt Type: application/vnd.oasis.opendocument.text Size: 210280 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: matteo_melideo.vcf Type: text/x-vcard Size: 354 bytes Desc: not available URL: From matteo.melideo at eng.it Tue May 31 12:52:13 2011 From: matteo.melideo at eng.it (Matteo Melideo) Date: Tue, 31 May 2011 12:52:13 +0200 Subject: [Fiware-tools] 31/5/2011 PhC brief outcomes Message-ID: <4DE4C85D.2000707@eng.it> Dear all, this conference call was very short today despite important aspects had to be faced. Participants: Matteo Melideo Pasquale Vitale Davide Dalle Carbonare Stefano De Panfilis Alajandra Trujio Brief recap: 1) the UML tool that will be used for our diagrams will be Papyrus. It is available Open Source both as Eclipse Plugin or stand alone. (More indications in the minutes); 2) due to the fact the wiki is not yet available in the FI-WARE Forge, we decided to use Google documents. If you have a Google account you want temporarily share with us it would be really appreciable; 3) with respect to the point 2), we are producing a document (see attached file) using google documentation and where, at the right moment, contributed just me and Davide. This contribution to this document is very important and any input, suggestion and revision from you will be more than helpful even from those partners with minor effort; The first deadline is next Monday when we will have to present part of this document to the Architecture Board meeting conference call. The minutes, basically recalling this mail, will be published in the FI-WARE forge as usual. Thanks and regards, Matteo -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: WP9.1IDEForgeIntegration.odt Type: application/vnd.oasis.opendocument.text Size: 193711 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: matteo_melideo.vcf Type: text/x-vcard Size: 354 bytes Desc: not available URL: From davide.dallecarbonare at eng.it Tue May 31 22:58:56 2011 From: davide.dallecarbonare at eng.it (Davide Dalle Carbonare) Date: Tue, 31 May 2011 22:58:56 +0200 Subject: [Fiware-tools] PhC minutes published In-Reply-To: <4DDBD71F.9030900@eng.it> References: <4DDBD71F.9030900@eng.it> Message-ID: <4DE55690.7050801@eng.it> Dear partners, I've uploaded in the forge the today PhC minutes http://forge.fi-ware.eu/docman/view.php/15/89/wp9-2011.05.31-minutes.doc The documents is private (you have to login to see it). Comments are welcome. cheers, Davide -------------- next part -------------- An HTML attachment was scrubbed... URL: