[Fiware] Source code and binary packages releasing procedure for FI-WARE Release 2

[Miguel Carrillo]

Dear Henk,

My colleague states that "although it could not be useful" we want it
here "to avoid misunderstandings with the EC".

We do ackowledge that this is of little use. But this maybe confusing
from outside (EC or others) and if someone tries to locate binaries and
does not find one GEi, he may think that there is something wrong or
missing.

If you want to further discuss it I would suggest that we do it off list.

Thanks for your understanding.

Regards,

Miguel



El 05/02/2013 17:16, Heijnen Henk escribió:
> What is the usefulness of releasing a binary that will only run on a specific HW or on dedicated network equipments ?? nobody will be able to use it !
>
> Is it really just for EU bureaucratic reasons?
>
>
> Henk  HEIJNEN
> Manager, Cooperative Projects
>
> Research & Innovation
> Funded & Cooperative Programs
> 975 avenue des champs blancs - CS 17616
> 35576 Cesson-Sévigné cedex - FRANCE
> Tél:  +33 2 99 27 33 08 -  GSM: +33 6 72 39 26 24 - BU4/114
>
>
> -----Original Message-----
> From: fiware-bounces at lists.fi-ware.eu [mailto:fiware-bounces at lists.fi-ware.eu] On Behalf Of Fermín Galán Márquez
> Sent: mardi 5 février 2013 16:54
> To: Heijnen Henk
> Cc: fiware at lists.fi-ware.eu
> Subject: Re: [Fiware] Source code and binary packages releasing procedure for FI-WARE Release 2
>
> Dear Henk,
>
> Yes, we understand that this kind of software is highly depended of the
> hardware platform in which it runs. However, although it could be not
> useful to release it as binary form (source code form releasing could be
> useful, but it is not mandatory) this kind of software must also be
> released following the rules in
> https://forge.fi-ware.eu/plugins/mediawiki/wiki/fiware/index.php/Tutorial_releasing_fiware,
> in order to make the process homogeneous along the project and, probably
> most important, to avoid misunderstanding with the EC (they are
> expecting that we release each GEi on the GEi list).
>
> I hope have clarified your doubt. Don't hesitate to contact us again if
> you need.
>
> Best regards,
>
> ------
> Fermín
>
>
> El 05/02/2013 16:24, Heijnen Henk escribió:
>> Hello,
>>
>> What about software targeting embedded platforms instead of servers ? (for example the Cloud Proxy: it runs only on a dedicated HW that is proprietary)
>>
>> Same problem with most of the I2ND GEs and (maybe) some IoT ones ...
>>
>> Regards
>> Henk
>>
>>
>>
>> Henk  HEIJNEN
>> Manager, Cooperative Projects
>>
>> Research & Innovation
>> Funded & Cooperative Programs
>> 975 avenue des champs blancs - CS 17616
>> 35576 Cesson-Sévigné cedex - FRANCE
>> Tél:  +33 2 99 27 33 08 -  GSM: +33 6 72 39 26 24 - BU4/114
>>
>>
>>
>> -----Original Message-----
>> From: fiware-bounces at lists.fi-ware.eu [mailto:fiware-bounces at lists.fi-ware.eu] On Behalf Of Fermín Galán Márquez
>> Sent: mardi 5 février 2013 16:21
>> To: fiware at lists.fi-ware.eu
>> Subject: [Fiware] Source code and binary packages releasing procedure for FI-WARE Release 2
>>
>> Hi,
>>
>> We have defined a guide on how to release source code and binary
>> packages for FI-WARE release 2 and beyond, that can be found at:
>>
>> https://forge.fi-ware.eu/plugins/mediawiki/wiki/fiware/index.php/Tutorial_releasing_fiware
>>
>>
>> (It is also linked from the Handbooks section in the FIWARE wiki main page)
>>
>> This is the procedure that each GEi implementor must  follow when
>> releasing the software for Release 2. Although it will be at that time
>> when you will need to follow it, we think a good idea to publish it in
>> the wiki and send this email at the present moment so you can know it in
>> advance and even use it for releasing any GEi release between now and
>> Release 2 if you want.
>>
>> We used SCM (i.e. Subversion) in the previous release due to problems
>> with the "Files" tool on the forge that are solved now. The old delivery
>> of Release 1 can stay as it is (there's no need to migrate) but the next
>> ones will use the "Files" part of the forge, that is more adequate for
>> our needs and  gives a better impression, especially towards external
>> developers communities.
>>
>> Please, don't hesitate to contact me if you have any doubt or comment.
>>
>> Thanks!
>>
>> Best regards,
>>
>> ------
>> Fermín
>>
>> ________________________________
>>
>> Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra política de envío y recepción de correo electrónico en el enlace situado más abajo.
>> This message is intended exclusively for its addressee. We only send and receive email on the basis of the terms set out at:
>> http://www.tid.es/ES/PAGINAS/disclaimer.aspx
>> _______________________________________________
>> Fiware mailing list
>> Fiware at lists.fi-ware.eu
>> http://lists.fi-ware.eu/listinfo/fiware
>
> ________________________________
>
> Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra política de envío y recepción de correo electrónico en el enlace situado más abajo.
> This message is intended exclusively for its addressee. We only send and receive email on the basis of the terms set out at:
> http://www.tid.es/ES/PAGINAS/disclaimer.aspx
> _______________________________________________
> Fiware mailing list
> Fiware at lists.fi-ware.eu
> http://lists.fi-ware.eu/listinfo/fiware
> _______________________________________________
> Fiware mailing list
> Fiware at lists.fi-ware.eu
> http://lists.fi-ware.eu/listinfo/fiware
> .
>

--
----------------------------------------------------------------------
      _/          _/_/                     Miguel Carrillo Pacheco
     _/   _/     _/  _/   Telefónica       Distrito Telefónica
    _/ _/_/_/   _/   _/   Investigación y  Edifico Oeste 1, Planta 4
   _/   _/     _/  _/     Desarrollo       Ronda de la Comunicación S/N
  _/          _/_/                         28050 Madrid (Spain)
                                           Tel:  (+34) 91 483 26 77

                                           e-mail: mcp at tid.es

Follow FI-WARE on the net

        Website:  http://www.fi-ware.eu
        Facebook: http://www.facebook.com/pages/FI-WARE/251366491587242
        Twitter:  http://twitter.com/Fiware
        LinkedIn: http://www.linkedin.com/groups/FIWARE-4239932
----------------------------------------------------------------------


________________________________

Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra política de envío y recepción de correo electrónico en el enlace situado más abajo.
This message is intended exclusively for its addressee. We only send and receive email on the basis of the terms set out at:
http://www.tid.es/ES/PAGINAS/disclaimer.aspx