Hi Federico,
Thank you for your guidance. I have managed to go forward but I also
still face few problems. Here is what I have done using Stockhom region:
I managed to associate floating IP and ssh connection worked fine.
However the server couldn't connect Internet properly: host names were
not resolved. It seemed that the server didn't get working DNS name
servers via DHCP. After trying rebooting and some configuration changes
I added public google DNS servers to subnet configuration. I wonder is
this way to go and are there FIWare specific DNS servers that should be
used, or is varying between regions?
Anyway things looked fine, so I started to update packages using
'apt-get'. However during installing packages server froze and ssh
connection died. After that I couldn't connect using ssh to the server,
reboots didn't help. I get just 'no route to host' error while trying
ssh connection. I tried redefining configurations, rebooting but nothing
seemed to help.
I have other user account for testing and I followed my own notes and
managed to launch instance and associate floating IP. Ssh connection
started working right away.
Now I went back to the original account and deleted everything on
Stockholm region: instances, networks, routers and released IPs. I
recreated the setup again. The creation and IP association went fine,
but still my ssh connection refuses to work: no route to host.
So I'm in situation that I have two accounts and VM instances running
on Stockholm region - on one account everything is ok, ssh connection
working (public IP 194.28.122.40). Updating packages using 'apt-get'
on this server went fine. - on other account the server is running but
I can't connect using ssh (public IP almost same 194.28.122.53). No
route to host.
So right now I have server that I can continue to use for my work.
However I would like to help you to troubleshoot situation because right
now it feels that the setup is unrealiable (I don't know is it because
of FI-Lab in general or related to Stockholm region).
There is web based VNC connection on Connection tab of instances. On
some regions it really shows console screen but on Stockholm region
'View Display' gives Corrupted Content Error. Should this 'View Display'
generally work? If yes, then what root password to use? There is 'Change
Password' for instances but I haven't seen it working.
Regards, Tero Vuorela
On Mon, Jan 19, 2015, at 06:25 PM, Federico Michele Facca wrote:
> Hi Tero, I got the message from sys admins that a set of public IPs
> has be been made available to developers. So you should be able to
> attach the gateway and self-assign a floating ip. If you still have
> problems, i will put you directly in contact with them.
>
> Best, Federico
>
> On Mon, Jan 19, 2015 at 10:32 AM, Federico Michele Facca
> <federico.facca at create-net.org> wrote:
>> Hi Tero, I assigned your ticket to stockholm infrastructure, they
>> will assign you a floating ip.
>>
>>
>> Federico
>>
>>
>> On Mon, Jan 19, 2015 at 6:10 AM, Tero Vuorela
>> <tero.vuorela at iki.fi> wrote:
>>> __
>>> Hi,
>>>
>>> Thanks for help. I have now successfully launched an VM using
>>> Stockholm node. I have created a private network and a router
>>> according to instructions. Now only public floating IP is missing so
>>> that I could start working with the server.
>>>
>>> I'm able to create floating IP from the pool XIFIfederatedACREO, but
>>> based on its name it is not probably what is needed. Also if I try
>>> to associate the IP to the created VM I get an error: {"badRequest":
>>> {"message": "Error. Unable to associate floating ip", "code": 400}}.
>>>
>>> Creating from the pool XIFIpublicACREO fails with {"computeFault":
>>> {"message": "The server has either erred or is incapable of
>>> performing the requested operation.", "code": 500}} but this is
>>> seems to be because public IP need to be requested separately?
>>>
>>> What information you need for requesting public floating IP for
>>> Stockholm node? Network is GBerryNetwork[1] *Subnet1*
>>> 192.168.100.0/24
>>> * *Name:* (9550acfc-e9e3-4b2b-9646-4d604582493b)
>>> * *ID:* 9550acfc-e9e3-4b2b-9646-4d604582493b
>>>
>>> Router
>>> * *Name:* GBerryRouter
>>> * *ID:* f5fc79d7-8d9c-4d54-8e4b-357b5841a0da
>>> * *Status:* ACTIVE
>>> * *External Gateway Information: *
>>> * *Connected External Network:* XIFIpublicACREO
>>>
>>> VM instance
>>> * *Name: * GBerryStockholmUbuntu14Large
>>> * *ID: * e5a9483f-a4ba-4ddc-ac8f-2b240172ea94
>>> * *Status: * ACTIVE
>>>
>>>
>>> Regards, Tero
>>>
>>> On Thu, Jan 15, 2015, at 06:46 PM, Federico Michele Facca wrote:
>>>> Dear Tero, regarding Prague, I am not sure what is the issue you
>>>> are experiencing. May it be you selected a flavour that is too
>>>> small? In budapest, I experienced your issue as well, thus I
>>>> suspect they are having problem at the moment.
>>>>
>>>> Anyhow, I tested both the nodes closest to you: Karlskrona and
>>>> Stockholm. No issue to launch vms. You will need anyhow to create
>>>> your own private network and request for a floating IP to the local
>>>> sys admin to access the vm via public IP. (this last step need to
>>>> be handled manually unfortunately).
>>>>
>>>> to try follow this guide:
>>>> http://stackoverflow.com/questions/27543127/deploy-vm-in-fiware-lab-nodes-with-neutron
>>>>
>>>> except step 6 and 9. if you confirm me that you are able on one of
>>>> the two nodes to launch vms, I will then ask the local sys admin to
>>>> assign you a floating ip.
>>>>
>>>> Best, Federico
>>>>
>>>>
>>>> On Thu, Jan 15, 2015 at 6:40 AM, Tero Vuorela <tero.vuorela at iki.fi>
>>>> wrote:
>>>>> __
>>>>> Hi,
>>>>>
>>>>> Thank you for your answer. If this is not a general problem, is
>>>>> there something I could do to help you to troubleshoot situation?
>>>>>
>>>>> I guess this should not be an issue of used browser. I'm using
>>>>> Firefox.
>>>>>
>>>>> Quickly testingI wouldn't expect this to be problem of a specific
>>>>> image. I have mainly tried Ubuntu 14.04 images but also tried
>>>>> CentOS and other ready made images.
>>>>>
>>>>> I have experimented many functions in FI-Lab portal, so I thought
>>>>> maybe I have managed to take my account is some unknown state and
>>>>> that might cause problems for launching instances. So I created a
>>>>> new account (theros at iki.fi).
>>>>>
>>>>> By the way I wanted to check if a second account is according to
>>>>> terms and conditions, but on sign up page the link
>>>>> http://forge.fiware.org/plugins/mediawiki/wiki/fiware/index.php/FI-LAB_Terms_and_Conditions
>>>>> says FI-WARE Forge Could Not Connect to Database: and the link in
>>>>> a confirmation email
>>>>> http://wiki.fiware.org/FI-LAB_Terms_and_Conditions says PAGE NOT
>>>>> FOUND[2]
>>>>>
>>>>> With the new account I just selected Budapest: Creating
>>>>> publicRange IP failed {"computeFault": {"message": "The server has
>>>>> either erred or is incapable of performing the requested
>>>>> operation.", "code": 500}}
>>>>>
>>>>> but mdvpnRange IP creation was ok, although I wasn't able to
>>>>> associate it to successfully launched image. {"badRequest":
>>>>> {"message": "Error. Unable to associate floating ip", "code":
>>>>> 400}}
>>>>>
>>>>> Based on floating IP name, mdvpnRange might not even be correct
>>>>> type of floating IP to get ssh access over public internet.
>>>>> Floating IP pools vary between regions, I haven't seen any
>>>>> instructions what should be selected although I can assume
>>>>> something based on a IP pool name.
>>>>>
>>>>> With the new account I also tried to launch instance on Prague
>>>>> region, but like before it started spawning and resulted soon to
>>>>> ERROR. So I don't see differences between accounts.
>>>>>
>>>>> I'm not in urgent hurry but I would like to having working setup
>>>>> as I'm right now starting to work with my project utilizing FIWare
>>>>> generic enablers. Please advice, if there is something I can do
>>>>> for helping troubleshooting.
>>>>>
>>>>>
>>>>> Regards, Tero Vuorela
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Wed, Jan 14, 2015, at 10:52 AM, MIGUEL CARRILLO PACHECO wrote:
>>>>>> Hi,
>>>>>>
>>>>>> Sorry to hear that this is causing so much trouble. Some nodes
>>>>>> assign IP addresses upon request. Let us check if the Prague node
>>>>>> has free IP addresses first. Each node has a separate 2nd level
>>>>>> team locally, I'll contact the Czech one right away.
>>>>>>
>>>>>>
>>>>>> If they fail to provide a good answer soon (hopefully not), then
>>>>>> we can move to the Budapest team.
>>>>>>
>>>>>> In response to your general question, the answer is that we are
>>>>>> not aware of a general problem.
>>>>>>
>>>>>> Best regards,
>>>>>>
>>>>>> Miguel El 13/01/2015 a las 20:57, Tero Vuorela escribió:
>>>>>>> Hello,
I have got answer to my earlier post and I was instructed to use either
Budapest or Prague regions. I tested those:
- Budapest: Instance creation fails here too like I have described
below. Deployment starts but ends to simple ERROR. No additional
information.
- Prague: I managed successfully launch instance but I'm unable to
allocate IP. There I get reasonable error message Error allocating IP
address. Cause: 404 Error {"itemNotFound": {"message":
"NoMoreFloatingIps: Zero floating ips available.", "code": 404}} How
ever when "Allocate Floating IP" dialog is open quota said that there
is one available.
I systematically went through all regions and (just for me?) all but
Poznan failed in away or another: either VM launching results to error
or floating IPs can't be assigned. On Poznan region I managed to connect
a launched VM with ssh.
I still wonder is this a general error situation, or is it just me who
is experiencing these problems.
Regards Tero Vuorela
----- Original message ----- From: Tero Vuorela <tero.vuorela at iki.fi>
To: fiware-lab-help at lists.fi-ware.org Subject: Failed to launch new
instances Date: Sat, 10 Jan 2015 10:30:43 +0200
Hi,
I trying to launch new instances in Fi-Lab but for some reason launching
fails every time and instance gets into error state. See attached
screenshot. I can't find any additional information for the error.
I tried different regions and different instances, but a result is
same: ERROR
I originally had a test instance running on Spain region, that was
launched in October but I deleted it as I couldn't anymore find
keypair, and understood that you can't associate new keypairs to
existing instance.
Is there a general problem in Fi-Lab, or am I just missing some step?
Regards, Tero Vuorela
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
Fiware-lab-help mailing list
>>>>>>> Fiware-lab-help at lists.fi-ware.org
>>>>>>> https://lists.fi-ware.org/listinfo/fiware-lab-help
>>>>>>
>>>>>> --
Please update your address book with my new e-mail address:
miguel.carrillopacheco at telefonica.com
----------------------------------------------------------------------
_/ _/_/ Miguel Carrillo Pacheco _/ _/ _/ _/ Telefónica Distrito
Telefónica _/ _/_/_/ _/ _/ Investigación y Edifico Oeste 1, Planta
9 _/ _/ _/ _/ Desarrollo Ronda de la Comunicación S/N _/ _/_/ 28050
Madrid (Spain) Tel: (+34) 91 483 26 77[3]
e-mail: miguel.carrillopacheco at telefonica.com
Follow FIWARE on the net
Website: http://www.fiware.org Facebook:
https://www.facebook.com/eu.fiware Twitter:
http://twitter.com/Fiware LinkedIn:
https://www.linkedin.com/groups/FIWARE-4239932
----------------------------------------------------------------------
>>>>>>
>>>>>>
>>>>>>
Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario,
puede contener información privilegiada o confidencial y es para uso
exclusivo de la persona o entidad de destino. Si no es usted. el
destinatario indicado, queda notificado de que la lectura, utilización,
divulgación y/o copia sin autorización puede estar prohibida en virtud
de la legislación vigente. Si ha recibido este mensaje por error, le
rogamos que nos lo comunique inmediatamente por esta misma vía y proceda
a su destrucción.
>>>>>>
>>>>>>
The information contained in this transmission is privileged and
confidential information intended only for the use of the individual or
entity named above. If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination, distribution
or copying of this communication is strictly prohibited. If you have
received this transmission in error, do not read it. Please immediately
reply to the sender that you have received this communication in error
and then delete it.
>>>>>>
>>>>>>
Esta mensagem e seus anexos se dirigem exclusivamente ao seu
destinatário, pode conter informação privilegiada ou confidencial e é
para uso exclusivo da pessoa ou entidade de destino. Se não é vossa
senhoria o destinatário indicado, fica notificado de que a leitura,
utilização, divulgação e/ou cópia sem autorização pode estar proibida em
virtude da legislação vigente. Se recebeu esta mensagem por erro,
rogamos-lhe que nos o comunique imediatamente por esta mesma via e
proceda a sua destruição
>>>>>
>>>>> --
>>>>> Tero Vuorela tero.vuorela at iki.fi
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Fiware-lab-help mailing list Fiware-lab-help at lists.fi-ware.org
>>>>> https://lists.fi-ware.org/listinfo/fiware-lab-help
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> --
>>>> Future Internet is closer than you think! http://www.fiware.org
>>>>
>>>> Official Mirantis partner for OpenStack Training
>>>> https://www.create-net.org/community/openstack-training
>>>>
>>>> --
>>>> Dr. Federico M. Facca
>>>>
>>>> CREATE-NET Via alla Cascata 56/D 38123 Povo Trento (Italy)
>>>>
>>>> P +39 0461 408400[4] (1669) M +39 334 6049758[5] E
>>>> federico.facca at create-net.org T @chicco785 W www.create-net.org
>>>
>>> --
>>> Tero Vuorela tero.vuorela at iki.fi
>>>
>>>
>>
>>
>>
>> --
>> --
>> Future Internet is closer than you think! http://www.fiware.org
>>
>> Official Mirantis partner for OpenStack Training
>> https://www.create-net.org/community/openstack-training
>>
>> --
>> Dr. Federico M. Facca
>>
>> CREATE-NET Via alla Cascata 56/D 38123 Povo Trento (Italy)
>>
>> P +39 0461 408400[6] (1669) M +39 334 6049758[7] E
>> federico.facca at create-net.org T @chicco785 W www.create-net.org
>
>
>
> --
> --
> Future Internet is closer than you think! http://www.fiware.org
>
> Official Mirantis partner for OpenStack Training
> https://www.create-net.org/community/openstack-training
>
> --
> Dr. Federico M. Facca
>
> CREATE-NET Via alla Cascata 56/D 38123 Povo Trento (Italy)
>
> P +39 0461 408400 (1669) M +39 334 6049758 E
> federico.facca at create-net.org T @chicco785 W www.create-net.org
--
Tero Vuorela tero.vuorela at iki.fi
Links:
1. https://cloud.lab.fiware.org/#neutron/networks/9550acfc-e9e3-4b2b-9646-4d604582493b
2. https://forge.fi-ware.org/
3. tel:%28%2B34%29%2091%20483%2026%2077
4. tel:%2B39%200461%20408400
5. tel:%2B39%20334%206049758
6. tel:%2B39%200461%20408400
7. tel:%2B39%20334%206049758
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.fiware.org/private/fiware-lab-help/attachments/20150122/8b1cc817/attachment.html>
You can get more information about our cookies and privacy policies clicking on the following links: Privacy policy Cookies policy