[Fiware-lab-help] URGENT: request for assistance; IDAS FINESCE dedicated instance

[e.idas1]

Hi all,

We have restarted IDAS instance, and it should work properly now.

But it seem to be a communication problem with FINESCE orion. Executing this curl in IDAS host, no reply is received:

 curl 130.206.82.78:1026/version

curl: (52) Empty reply from server


Regards,
IDAS team
________________________________________
De: Daniele Santoro [daniele.santoro at create-net.org]
Enviado: miércoles, 09 de septiembre de 2015 10:32
Para: simonov at ismb.it
CC: e.idas1; CARLOS RALLI UCENDO; marco.paulucci; fiware-lab-help; gianluca.zanetto at teamware.it; Massimiliano Nigrelli; Federico Rizzo; Pasquale Andriani; alessandro.gobbo
Asunto: Re: [Fiware-lab-help] URGENT: request for assistance; IDAS FINESCE dedicated instance

Ok thanks, I’ve assigned the ticket to the second level support for IDAS GE.

Daniele

> On 09 Sep 2015, at 10:29, M. Simonov, PhD (ISMB) <simonov at ismb.it> wrote:
>
> Hi Daniele,
>
> IDAS comes from Telefonica.
> We are users only. We used the FIWARE IDAS instance based on the instructions and the apikey from the IDAS team.
> It was working till 31 May.
>
> Regards, Mikhail
>
> -----Original Message-----
> From: Daniele Santoro [mailto:daniele.santoro at create-net.org]
> Sent: mercoledì 9 settembre 2015 10:09
> To: simonov at ismb.it
> Cc: e.idas1; CARLOS RALLI UCENDO; marco.paulucci; fiware-lab-help; gianluca.zanetto at teamware.it; Massimiliano Nigrelli; Federico Rizzo; Pasquale Andriani; alessandro.gobbo
> Subject: Re: [Fiware-lab-help] URGENT: request for assistance; IDAS FINESCE dedicated instance
>
> Dear,
>
> In which region are the instance running ? I can forward the issue to the specific region support to give you an more specific help.
>
> Best,
> Daniele
>
>> On 09 Sep 2015, at 10:04, M. Simonov, PhD (ISMB) <simonov at ismb.it> wrote:
>>
>> Dear IDAS team, Carlos,
>>
>> after the disk failure on our server, we repaired, re-installed, and
>> re-started the application that uses the IDAS instance on the
>> 130.206.80.47:8002 (Idas FINESCE) IDASClient c = new
>> IDASClient("http://130.206.80.47:8002/idas/sml?apikey=69ra4ia6acvgm6f5
>> p7nn19crdi");
>>
>> We cross-checked the network settings and the communication channel is open, not restricted.
>>
>> The issue is the fact that the IDAS refuse the connection by returning the “407 Proxy Authentication required”.
>> We do not have any proxy. Our software worked in the past. There seems no reasons for the different behavior.
>>
>> We tried to ping http://130.206.80.47, but IDAS is not answering.
>> We tried to post some data through POSTMAN, but the answer is “404 Not Found”.
>>
>> The urgency is caused by the 15th September Final review of FIENSCE with EC officials, so the application should be working.
>> Please, could you check and reactivate the IDAS instance that serves FINESCE application as soon as possible in the same configuration as before.
>>
>> Thank you. M. SImonov
>>
>> _______________________________________________
>> Fiware-lab-help mailing list
>> Fiware-lab-help at lists.fiware.org
>> https://lists.fiware.org/listinfo/fiware-lab-help-new
>
>


________________________________

Este mensaje y sus adjuntos se dirigen exclusivamente a su destinatario, puede contener información privilegiada o confidencial y es para uso exclusivo de la persona o entidad de destino. Si no es usted. el destinatario indicado, queda notificado de que la lectura, utilización, divulgación y/o copia sin autorización puede estar prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción.

The information contained in this transmission is privileged and confidential information intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this transmission in error, do not read it. Please immediately reply to the sender that you have received this communication in error and then delete it.

Esta mensagem e seus anexos se dirigem exclusivamente ao seu destinatário, pode conter informação privilegiada ou confidencial e é para uso exclusivo da pessoa ou entidade de destino. Se não é vossa senhoria o destinatário indicado, fica notificado de que a leitura, utilização, divulgação e/ou cópia sem autorização pode estar proibida em virtude da legislação vigente. Se recebeu esta mensagem por erro, rogamos-lhe que nos o comunique imediatamente por esta mesma via e proceda a sua destruição